- 04 8月, 2014 1 次提交
-
-
由 Weston Andros Adamson 提交于
This is useful when lsegs need to be released while holding locks. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 16 7月, 2014 1 次提交
-
-
由 NeilBrown 提交于
The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NNeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brownSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 25 6月, 2014 4 次提交
-
-
由 Weston Andros Adamson 提交于
Clean up pnfs_read_done_resend_to_mds and pnfs_write_done_resend_to_mds: - instead of passing all arguments from a nfs_pgio_header, just pass the header - share the common code Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
The refcounting on nfs_pgio_header was related to there being (possibly) more than one nfs_pgio_data. Now that nfs_pgio_data has been merged into nfs_pgio_header, there is no reason to do this ref counting. Just call the completion callback on nfs_pgio_release/nfs_pgio_error. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is passed around everywhere, because there used to be multiple _data structs per _header. Many of these functions then use the _data to find a pointer to the _header. This patch cleans this up by merging the nfs_pgio_data structure into nfs_pgio_header and passing nfs_pgio_header around instead. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
nfs_rw_header was used to allocate an nfs_pgio_header along with an nfs_pgio_data, because a _header would need at least one _data. Now there is only ever one nfs_pgio_data for each nfs_pgio_header -- move it to nfs_pgio_header and get rid of nfs_rw_header. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 10 6月, 2014 1 次提交
-
-
由 Weston Andros Adamson 提交于
end_offset and req_offset both return u64 - avoid casting to u32 until it's needed, when it's less than the (u32) size returned by nfs_generic_pg_test. Also, fix the comments in pnfs_generic_pg_test. Running the cthon04 special tests caused this lockup in the "write/read at 2GB, 4GB edges" test when running against a file layout server: BUG: soft lockup - CPU#0 stuck for 22s! [bigfile2:823] Modules linked in: nfs_layout_nfsv41_files rpcsec_gss_krb5 nfsv4 nfs fscache ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_mangle ip6table_filter ip6_tables iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ppdev crc32c_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd serio_raw e1000 shpchp i2c_piix4 i2c_core parport_pc parport nfsd auth_rpcgss oid_registry exportfs nfs_acl lockd sunrpc btrfs xor zlib_deflate raid6_pq mptspi scsi_transport_spi mptscsih mptbase ata_generic floppy autofs4 irq event stamp: 205958 hardirqs last enabled at (205957): [<ffffffff814a62dc>] restore_args+0x0/0x30 hardirqs last disabled at (205958): [<ffffffff814ad96a>] apic_timer_interrupt+0x6a/0x80 softirqs last enabled at (205956): [<ffffffff8103ffb2>] __do_softirq+0x1ea/0x2ab softirqs last disabled at (205951): [<ffffffff8104026d>] irq_exit+0x44/0x9a CPU: 0 PID: 823 Comm: bigfile2 Not tainted 3.15.0-rc1-branch-pgio_plus+ #3 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 task: ffff8800792ec480 ti: ffff880078c4e000 task.ti: ffff880078c4e000 RIP: 0010:[<ffffffffa02ce51f>] [<ffffffffa02ce51f>] nfs_page_group_unlock+0x3e/0x4b [nfs] RSP: 0018:ffff880078c4fab0 EFLAGS: 00000202 RAX: 0000000000000fff RBX: ffff88006bf83300 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88006bf83300 RBP: ffff880078c4fab8 R08: 0000000000000001 R09: 0000000000000000 R10: ffffffff8249840c R11: 0000000000000000 R12: 0000000000000035 R13: ffff88007ffc72d8 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f45f11b7740(0000) GS:ffff88007f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a8cb632d0 CR3: 000000007931c000 CR4: 00000000001407f0 Stack: ffff88006bf832c0 ffff880078c4fb00 ffffffffa02cec22 ffff880078c4fad8 00000fff810f9d99 ffff880078c4fca0 ffff88006bf832c0 ffff88006bf832c0 ffff880078c4fca0 ffff880078c4fd60 ffff880078c4fb28 ffffffffa02cee34 Call Trace: [<ffffffffa02cec22>] __nfs_pageio_add_request+0x298/0x34f [nfs] [<ffffffffa02cee34>] nfs_pageio_add_request+0x1f/0x42 [nfs] [<ffffffffa02d1722>] nfs_do_writepage+0x1b5/0x1e4 [nfs] [<ffffffffa02d1764>] nfs_writepages_callback+0x13/0x25 [nfs] [<ffffffffa02d1751>] ? nfs_do_writepage+0x1e4/0x1e4 [nfs] [<ffffffff810eb32d>] write_cache_pages+0x254/0x37f [<ffffffffa02d1751>] ? nfs_do_writepage+0x1e4/0x1e4 [nfs] [<ffffffff8149cf9e>] ? printk+0x54/0x56 [<ffffffff810eacca>] ? __set_page_dirty_nobuffers+0x22/0xe9 [<ffffffffa016d864>] ? put_rpccred+0x38/0x101 [sunrpc] [<ffffffffa02d1ae1>] nfs_writepages+0xb4/0xf8 [nfs] [<ffffffff810ec59c>] do_writepages+0x21/0x2f [<ffffffff810e36e8>] __filemap_fdatawrite_range+0x55/0x57 [<ffffffff810e374a>] filemap_write_and_wait_range+0x2d/0x5b [<ffffffffa030ba0a>] nfs4_file_fsync+0x3a/0x98 [nfsv4] [<ffffffff8114ee3c>] vfs_fsync_range+0x18/0x20 [<ffffffff810e40c2>] generic_file_aio_write+0xa7/0xbd [<ffffffffa02c5c6b>] nfs_file_write+0xf0/0x170 [nfs] [<ffffffff81129215>] do_sync_write+0x59/0x78 [<ffffffff8112956c>] vfs_write+0xab/0x107 [<ffffffff81129c8b>] SyS_write+0x49/0x7f [<ffffffff814acd12>] system_call_fastpath+0x16/0x1b Reported-by: NAnna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 29 5月, 2014 11 次提交
-
-
由 Weston Andros Adamson 提交于
Remove alignment checks that would revert to MDS and change pg_test to return the max ammount left in the segment (or other pg_test call) up to size of passed request, or 0 if no space is left. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Since the ability to split pages into subpage requests has been added, nfs_pgio_header->rpc_list only ever has one pgio data. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
Now that pg_test can change the size of the request (by returning a non-zero size smaller than the request), pg_test functions that call other pg_test functions must return the minimum of the result - or 0 if any fail. Also clean up the logic of some pg_test functions so that all checks are for contitions where coalescing is not possible. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Weston Andros Adamson 提交于
This is a step toward allowing pg_test to inform the the coalescing code to reduce the size of requests so they may fit in whatever scheme the pg_test callback wants to define. For now, just return the size of the request if there is space, or 0 if there is not. This shouldn't change any behavior as it acts the same as when the pg_test functions returned bool. Signed-off-by: NWeston Andros Adamson <dros@primarydata.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
These functions are almost identical on both the read and write side. FLUSH_COND_STABLE will never be set for the read path, so leaving it in the generic code won't hurt anything. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
I create a new struct nfs_rw_ops to decide the differences between reads and writes. This struct will be set when initializing a new nfs_pgio_descriptor, and then passed on to the nfs_rw_header when a new header is allocated. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
These functions are identical for the read and write paths so they can be combined. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
The only difference is the write verifier field, but we can keep that for a little bit longer. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Anna Schumaker 提交于
At this point, the only difference between nfs_read_data and nfs_write_data is the write verifier. Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
The read_pageio_init method is just a very convoluted way to grab the right nfs_pageio_ops vector. The vector to chose is not a choice of protocol version, but just a pNFS vs MDS I/O choice that can simply be done inside nfs_pageio_init_read based on the presence of a layout driver, and a new force_mds flag to the special case of falling back to MDS I/O on a pNFS-capable volume. Signed-off-by: NChristoph Hellwig <hch@lst.de> Tested-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Christoph Hellwig 提交于
The write_pageio_init method is just a very convoluted way to grab the right nfs_pageio_ops vector. The vector to chose is not a choice of protocol version, but just a pNFS vs MDS I/O choice that can simply be done inside nfs_pageio_init_write based on the presence of a layout driver, and a new force_mds flag to the special case of falling back to MDS I/O on a pNFS-capable volume. Signed-off-by: NChristoph Hellwig <hch@lst.de> Tested-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 18 4月, 2014 1 次提交
-
-
由 Peter Zijlstra 提交于
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 20 2月, 2014 2 次提交
-
-
由 Trond Myklebust 提交于
If the server returns a completely new layout stateid in response to our LAYOUTGET, then make sure to free any existing layout segments. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
Subtraction of signed integers does not have well defined wraparound semantics in the C99 standard. In order to be wraparound-safe, we have to use unsigned subtraction, and then cast the result. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 14 1月, 2014 1 次提交
-
-
由 Trond Myklebust 提交于
nfs4_write_inode() must not be allowed to exit until the layoutcommit is done. That means that both NFS_INO_LAYOUTCOMMIT and NFS_INO_LAYOUTCOMMITTING have to be cleared. Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 22 8月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
Set up tracepoints to track read, write and commit, as well as pNFS reads and writes and commits to the data server. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 6月, 2013 2 次提交
-
-
由 Trond Myklebust 提交于
Give them names that are a bit more consistent with the general pNFS naming scheme. - lo_seg_contained -> pnfs_lseg_range_contained - lo_seg_intersecting -> pnfs_lseg_range_intersecting - cmp_layout -> pnfs_lseg_range_cmp - is_matching_lseg -> pnfs_lseg_range_match Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Also strip off the unnecessary 'inline' declarations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 6月, 2013 3 次提交
-
-
由 Trond Myklebust 提交于
ctx->cred == ctx->state->owner->so_cred, so let's just use the former. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need to use the same credential as was used for the layoutget and/or layoutcommit operations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we use the same credential for layoutget, layoutcommit and layoutreturn. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 3月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
If state recovery fails with an ESTALE or a ENOENT, then we shouldn't keep retrying. Instead, mark the stateid as being invalid and fail the I/O with an EIO error. For other operations such as POSIX and BSD file locking, truncate etc, fail with an EBADF to indicate that this file descriptor is no longer valid. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 3月, 2013 3 次提交
-
-
由 Trond Myklebust 提交于
In order to be able to safely return the layout in nfs4_proc_setattr, we need to block new uses of the layout, wait for all outstanding users of the layout to complete, commit the layout and then return it. This patch adds a helper in order to do all this safely. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Boaz Harrosh <bharrosh@panasas.com>
-
由 Trond Myklebust 提交于
Note that clearing NFS_INO_LAYOUTCOMMIT is tricky, since it requires you to also clear the NFS_LSEG_LAYOUTCOMMIT bits from the layout segments. The only two sites that need to do this are the ones that call pnfs_return_layout() without first doing a layout commit. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NBenny Halevy <bhalevy@tonian.com> Cc: stable@vger.kernel.org
-
由 Trond Myklebust 提交于
We need to clear the NFS_LSEG_LAYOUTCOMMIT bits atomically with the NFS_INO_LAYOUTCOMMIT bit, otherwise we may end up with situations where the two are out of sync. The first half of the problem is to ensure that pnfs_layoutcommit_inode clears the NFS_LSEG_LAYOUTCOMMIT bit through pnfs_list_write_lseg. We still need to keep the reference to those segments until the RPC call is finished, so in order to make it clear _where_ those references come from, we add a helper pnfs_list_write_lseg_done() that cleans up after pnfs_list_write_lseg. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NBenny Halevy <bhalevy@tonian.com> Cc: stable@vger.kernel.org
-
- 01 3月, 2013 1 次提交
-
-
由 Weston Andros Adamson 提交于
The client will currently try LAYOUTGETs forever if a server is returning NFS4ERR_LAYOUTTRYLATER or NFS4ERR_RECALLCONFLICT - even if the client no longer needs the layout (ie process killed, unmounted). This patch uses the DS timeout value (module parameter 'dataserver_timeo' via rpc layer) to set an upper limit of how long the client tries LATOUTGETs in this situation. Once the timeout is reached, IO is redirected to the MDS. This also changes how the client checks if a layout is on the clp list to avoid a double list_add. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 2月, 2013 1 次提交
-
-
由 Benny Halevy 提交于
Pass the directio request on pageio_init to clean up the API. Percolate pg_dreq from original nfs_pageio_descriptor to the pnfs_{read,write}_done_resend_to_mds and use it on respective call to nfs_pageio_init_{read,write} on the newly created nfs_pageio_descriptor. Reproduced by command: mount -o vers=4.1 server:/ /mnt dd bs=128k count=8 if=/dev/zero of=/mnt/dd.out oflag=direct BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs] PGD 34786067 PUD 34794067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: nfs_layout_nfsv41_files nfsv4 nfs nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc btrfs zlib_deflate libcrc32c ipv6 autofs4 CPU 1 Pid: 259, comm: kworker/1:2 Not tainted 3.8.0-rc6 #2 Bochs Bochs RIP: 0010:[<ffffffffa021a3a8>] [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs] RSP: 0018:ffff880038f8fa68 EFLAGS: 00010206 RAX: ffffffffa021a6a9 RBX: ffff880038f8fb48 RCX: 00000000000a0000 RDX: ffffffffa021e616 RSI: ffff8800385e9a40 RDI: 0000000000000028 RBP: ffff880038f8fa68 R08: ffffffff81ad6720 R09: ffff8800385e9510 R10: ffffffffa0228450 R11: ffff880038e87418 R12: ffff8800385e9a40 R13: ffff8800385e9a70 R14: ffff880038f8fb38 R15: ffffffffa0148878 FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000028 CR3: 0000000034789000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/1:2 (pid: 259, threadinfo ffff880038f8e000, task ffff880038302480) Stack: ffff880038f8fa78 ffffffffa021a6bf ffff880038f8fa88 ffffffffa021bb82 ffff880038f8fae8 ffffffffa021f454 ffff880038f8fae8 ffffffff8109689d ffff880038f8fab8 ffffffff00000006 0000000000000000 ffff880038f8fb48 Call Trace: [<ffffffffa021a6bf>] nfs_direct_pgio_init+0x16/0x18 [nfs] [<ffffffffa021bb82>] nfs_pgheader_init+0x6a/0x6c [nfs] [<ffffffffa021f454>] nfs_generic_pg_writepages+0x51/0xf8 [nfs] [<ffffffff8109689d>] ? mark_held_locks+0x71/0x99 [<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc] [<ffffffffa021bc25>] nfs_pageio_doio+0x1a/0x43 [nfs] [<ffffffffa021be7c>] nfs_pageio_complete+0x16/0x2c [nfs] [<ffffffffa02608be>] pnfs_write_done_resend_to_mds+0x95/0xc5 [nfsv4] [<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc] [<ffffffffa028e27f>] filelayout_reset_write+0x8c/0x99 [nfs_layout_nfsv41_files] [<ffffffffa028e5f9>] filelayout_write_done_cb+0x4d/0xc1 [nfs_layout_nfsv41_files] [<ffffffffa024587a>] nfs4_write_done+0x36/0x49 [nfsv4] [<ffffffffa021f996>] nfs_writeback_done+0x53/0x1cc [nfs] [<ffffffffa021fb1d>] nfs_writeback_done_common+0xe/0x10 [nfs] [<ffffffffa028e03d>] filelayout_write_call_done+0x28/0x2a [nfs_layout_nfsv41_files] [<ffffffffa01488a1>] rpc_exit_task+0x29/0x87 [sunrpc] [<ffffffffa014a0c9>] __rpc_execute+0x11d/0x3cc [sunrpc] [<ffffffff810969dc>] ? trace_hardirqs_on_caller+0x117/0x173 [<ffffffffa014a39f>] rpc_async_schedule+0x27/0x32 [sunrpc] [<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc] [<ffffffff8105f8c1>] process_one_work+0x226/0x422 [<ffffffff8105f7f4>] ? process_one_work+0x159/0x422 [<ffffffff81094757>] ? lock_acquired+0x210/0x249 [<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc] [<ffffffff810600d8>] worker_thread+0x126/0x1c4 [<ffffffff8105ffb2>] ? manage_workers+0x240/0x240 [<ffffffff81064ef8>] kthread+0xb1/0xb9 [<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65 [<ffffffff815206ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65 Code: 00 83 38 02 74 12 48 81 4b 50 00 00 01 00 c7 83 60 07 00 00 01 00 00 00 48 89 df e8 55 fe ff ff 5b 41 5c 5d c3 66 90 55 48 89 e5 <f0> ff 07 5d c3 55 48 89 e5 f0 ff 0f 0f 94 c0 84 c0 0f 95 c0 0f RIP [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs] RSP <ffff880038f8fa68> CR2: 0000000000000028 Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Cc: stable@kernel.org [>= 3.6] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 2月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
The current code in pnfs_destroy_all_layouts() assumes that removing the layout from the server->layouts list is sufficient to make it invisible to other processes. This ignores the fact that most users access the layout through the nfs_inode->layout... There is further breakage due to lack of reference counting of the layouts, meaning that the whole thing Oopses at the drop of a hat. The code in initiate_bulk_draining() is almost correct, and can be used as a model for pnfs_destroy_all_layouts(), so move that code to pnfs.c, and refactor the code to allow us to choose between a single filesystem bulk recall, and a recall of all layouts. Also note that initiate_bulk_draining() currently calls iput() while holding locks. Fix that too. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-
- 04 1月, 2013 1 次提交
-
-
由 Yanchuan Nian 提交于
The layout will be set unusable if LAYOUTGET fails. Is it reasonable to increase the refcount iff LAYOUTGET fails the first time? Signed-off-by: NYanchuan Nian <ycnian@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org [>= 3.7]
-
- 05 11月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 11月, 2012 1 次提交
-
-
由 Yanchuan Nian 提交于
The new layout pointer in pnfs_find_alloc_layout() may be NULL because of out of memory. we must do some check work, otherwise pnfs_free_layout_hdr() will go wrong because it can not deal with a NULL pointer. Signed-off-by: NYanchuan Nian <ycnian@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 09 10月, 2012 1 次提交
-
-
由 Peng Tao 提交于
For buffer read, use offst-to-isize. For direct read, use dreq->bytes_left. Signed-off-by: NPeng Tao <tao.peng@emc.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-