Currently, the lwtunnel state resides in per-protocol data. This is
a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa).
The xmit function of the tunnel does not know whether the packet has been
routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the
lwtstate data to dst_entry makes such inter-protocol tunneling possible.

As a bonus, this brings a nice diffstat.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll
be used with IPv6 tunnels, too.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the
newly introduced padding after the IPv4 addresses needs to be zeroed out.
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andreas reported breakage adding routes with local nexthops:
$ ip route show table main
...
172.28.0.0/24 dev vnf-xe1p0  proto kernel  scope link  src 172.28.0.16

$ ip route add 10.0.0.0/8 via 172.28.0.32 table 100 dev vnf-xe1p0
RTNETLINK answers: Resource temporarily unavailable

3bfd8472 changed the lookup to use the passed in table but for cases like
this the nexthop is in the local table rather than the passed in table.

Fixes: 3bfd8472 ("net: Use passed in table for nexthop lookups")
Reported-by: NAndreas Schultz <aschultz@tpip.net>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make fib_encap_match() static as it isn't used outside the file.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While running net-next I hit this:
[  634.073119] ===============================
[  634.073150] [ INFO: suspicious RCU usage. ]
[  634.073182] 4.2.0-rc6+ #45 Not tainted
[  634.073213] -------------------------------
[  634.073244] include/net/vrf.h:38 suspicious rcu_dereference_check()
usage!
[  634.073274]
               other info that might help us debug this:

[  634.073307]
               rcu_scheduler_active = 1, debug_locks = 1
[  634.073338] 2 locks held by swapper/0/0:
[  634.073369]  #0:  (((&n->timer))){+.-...}, at: [<ffffffff8112bc35>]
call_timer_fn+0x5/0x480
[  634.073412]  #1:  (slock-AF_INET){+.-...}, at: [<ffffffff8174f0f5>]
icmp_send+0x155/0x5f0
[  634.073450]
               stack backtrace:
[  634.073483] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc6+ #45
[  634.073514] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[  634.073545]  0000000000000000 0593ba8242d9ace4 ffff88002fc03b48
ffffffff81803f1b
[  634.073612]  0000000000000000 ffffffff81e12500 ffff88002fc03b78
ffffffff811003c5
[  634.073642]  0000000000000000 ffff88002ec4e600 ffffffff81f00f80
ffff88002fc03cf0
[  634.073669] Call Trace:
[  634.073694]  <IRQ>  [<ffffffff81803f1b>] dump_stack+0x4c/0x65
[  634.073728]  [<ffffffff811003c5>] lockdep_rcu_suspicious+0xc5/0x100
[  634.073763]  [<ffffffff8174eb56>] icmp_route_lookup+0x176/0x5c0
[  634.073793]  [<ffffffff8174f2fb>] ? icmp_send+0x35b/0x5f0
[  634.073818]  [<ffffffff8174f274>] ? icmp_send+0x2d4/0x5f0
[  634.073844]  [<ffffffff8174f3ce>] icmp_send+0x42e/0x5f0
[  634.073873]  [<ffffffff8170b662>] ipv4_link_failure+0x22/0xa0
[  634.073899]  [<ffffffff8174bdda>] arp_error_report+0x3a/0x80
[  634.073926]  [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0
[  634.073952]  [<ffffffff816d396e>] neigh_invalidate+0x8e/0x110
[  634.073984]  [<ffffffff816d62ae>] neigh_timer_handler+0x1ae/0x290
[  634.074013]  [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0
[  634.074013]  [<ffffffff8112bce3>] call_timer_fn+0xb3/0x480
[  634.074013]  [<ffffffff8112bc35>] ? call_timer_fn+0x5/0x480
[  634.074013]  [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0
[  634.074013]  [<ffffffff8112c2bc>] run_timer_softirq+0x20c/0x430
[  634.074013]  [<ffffffff810af50e>] __do_softirq+0xde/0x630
[  634.074013]  [<ffffffff810afc97>] irq_exit+0x117/0x120
[  634.074013]  [<ffffffff81810976>] smp_apic_timer_interrupt+0x46/0x60
[  634.074013]  [<ffffffff8180e950>] apic_timer_interrupt+0x70/0x80
[  634.074013]  <EOI>  [<ffffffff8106b9d6>] ? native_safe_halt+0x6/0x10
[  634.074013]  [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10
[  634.074013]  [<ffffffff81027d43>] default_idle+0x23/0x200
[  634.074013]  [<ffffffff8102852f>] arch_cpu_idle+0xf/0x20
[  634.074013]  [<ffffffff810f89ba>] default_idle_call+0x2a/0x40
[  634.074013]  [<ffffffff810f8dcc>] cpu_startup_entry+0x39c/0x4c0
[  634.074013]  [<ffffffff817f9cad>] rest_init+0x13d/0x150
[  634.074013]  [<ffffffff81f69038>] start_kernel+0x4a8/0x4c9
[  634.074013]  [<ffffffff81f68120>] ?
early_idt_handler_array+0x120/0x120
[  634.074013]  [<ffffffff81f68339>] x86_64_start_reservations+0x2a/0x2c
[  634.074013]  [<ffffffff81f68485>] x86_64_start_kernel+0x14a/0x16d

It would seem vrf_master_ifindex_rcu() can be called without RCU held in
other contexts as well so introduce a new helper which acquires rcu and
returns the ifindex.
Also add curly braces around both the "if" and "else" parts as per the
style guide.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, two routes going through the same tunnel interface are considered
the same even when they are routed to a different host after encapsulation.
This causes all routes added after the first one to have incorrect
encapsulation parameters.

This is nicely visible by doing:

  # ip r a 192.168.1.2/32 dev vxlan0 tunnel dst 10.0.0.2
  # ip r a 192.168.1.3/32 dev vxlan0 tunnel dst 10.0.0.3
  # ip r
  [...]
  192.168.1.2/32 tunnel id 0 src 0.0.0.0 dst 10.0.0.2 [...]
  192.168.1.3/32 tunnel id 0 src 0.0.0.0 dst 10.0.0.2 [...]

Implement the missing comparison function.

Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel")
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The built lwtunnel_state struct has to be freed after comparison.

Fixes: 571e7226 ("ipv4: support for fib route lwtunnel encap attributes")
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

inet_proto_csum_replace4,2,16 take a pseudohdr argument which indicates
the checksum field carries a pseudo header. This argument should be a
boolean instead of an int.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the capability to redirect dst input in the same way
that dst output is redirected by LWT.

Also, save the original dst.input and and dst.out when setting up
lwtunnel redirection. These can be called by the client as a pass-
through.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Table lookup compiles out when VRF is not enabled.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We already have IFLA_IPTUN_ netlink attributes. The IP_TUN_ attributes look
very similar, yet they serve very different purpose. This is confusing for
anyone trying to implement a user space tool supporting lwt.

As the IP_TUN_ attributes are used only for the lightweight tunnels, prefix
them with LWTUNNEL_IP_ instead to make their purpose clear. Also, it's more
logical to have them in lwtunnel.h together with the encap enum.

Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel")
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fib_lookup() forces FIB_LOOKUP_NOREF flag, while fib_table_lookup()
does not.

This patch solves the typical message at reboot time or device
dismantle :

unregister_netdevice: waiting for eth0 to become free. Usage count = 4

Fixes: 3bfd8472 ("net: Use passed in table for nexthop lookups")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fragmentation cache uses information from the IP header to reassemble
packets. That information can be duplicated across VRFs -- same source
and destination addresses, protocol and id. Handle fragmentation with
VRFs by adding the VRF device index to entries in the cache and the
lookup arg.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If output device is not specified use VRF device if input device is
enslaved. This is needed to ensure tcp acks and resets go out VRF device.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a user passes in a table for new routes use that table for nexthop
lookups. Specifically, this solves the case where a connected route does
not exist in the main table, but only another table and then a subsequent
route is added with a next hop using the connected route. ie.,

$ ip route ls
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0  proto kernel  scope link  src 10.0.2.15
169.254.0.0/16 dev eth0  scope link  metric 1003
192.168.56.0/24 dev eth1  proto kernel  scope link  src 192.168.56.51

$ ip route ls table 10
1.1.1.0/24 dev eth2  scope link

Without this patch adding a nexthop route fails:

$ ip route add table 10 2.2.2.0/24 via 1.1.1.10
RTNETLINK answers: Network is unreachable

With this patch the route is added successfully.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a device associated with a VRF is brought up or down routes
should be added to/removed from the table associated with the VRF.
fib_magic defaults to using the main or local tables. Have it use
the table with the device if there is one.

A part of this is directing prefsrc validations to the correct
table as well.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently inet_addr_type and inet_dev_addr_type expect local addresses
to be in the local table. With the VRF device local routes for devices
associated with a VRF will be in the table associated with the VRF.
Provide an alternate inet_addr lookup to use a specific table rather
than defaulting to the local table.

inet_addr_type_dev_table keeps the same semantics as inet_addr_type but
if the passed in device is enslaved to a VRF then the table for that VRF
is used for the lookup.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently inet_addr_type and inet_dev_addr_type expect local addresses
to be in the local table. With the VRF device local routes for devices
associated with a VRF will be in the table associated with the VRF.
Provide an alternate inet_addr lookup to use a specific table rather
than defaulting to the local table.
Signed-off-by: NShrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For unconnected UDP sockets using a VRF device lookup source address
based on VRF table. This allows the UDP header to be properly setup
before showing up at the VRF device via the dst.
Signed-off-by: NShrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As with ingress use the index of VRF master device for route lookups on
egress. However, the oif should only be used to direct the lookups to a
specific table. Routes in the table are not based on the VRF device but
rather interfaces that are part of the VRF so do not consider the oif for
lookups within the table. The FLOWI_FLAG_VRFSRC is used to control this
latter part.
Signed-off-by: NShrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On ingress use index of VRF master device for route lookups if real device
is enslaved. Rules are expected to be installed for the VRF device to
direct lookups to a specific table.
Signed-off-by: NShrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When TLP fails to send new packet because of receive window
limit, it should fall back to retransmit the last packet instead.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NNandita Dukkipati <nanditad@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If TLP was unable to send a probe, it extended the RTO to
now + icsk_rto. But extending the RTO makes little sense
if no TLP probe went out. With this commit, instead of
extending the RTO we re-arm it relative to the transmit time
of the write queue head.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NNandita Dukkipati <nanditad@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a system has multiple ethernet devices and during DHCP
request (for using NFS), the system waits only for HZ/2 which is
500mS before switching to another interface for DHCP.

There are some routers (Ex: Trendnet routers) which responds to
DHCP request at about 560mS. When the system has only one
ethernet interface there is no issue as the timeout is 2S and the
dev xid doesn't changes and only retries.

But when the system has multiple Ethernet like DRA74x with CPSW
in dual EMAC mode, the DHCP response is dropped as the dev xid
changes while shifting to the next device. So changing inter
device timeout to HZ (which is 1S).
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rules can be installed that direct route lookups to specific tables based
on oif. Plumb the oif through the xfrm lookups so it gets set in the flow
struct and passed to the resolver routines.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

In commit b357a364 ("inet: fix possible panic in
reqsk_queue_unlink()"), I missed fact that tcp_check_req()
can return the listener socket in one case, and that we must
release the request socket refcount or we leak it.

Tested:

 Following packetdrill test template shows the issue

0     socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0    setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0    bind(3, ..., ...) = 0
+0    listen(3, 1) = 0

+0    < S 0:0(0) win 2920 <mss 1460,sackOK,nop,nop>
+0    > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
+.002 < . 1:1(0) ack 21 win 2920
+0    > R 21:21(0)

Fixes: b357a364 ("inet: fix possible panic in reqsk_queue_unlink()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

reqsk_queue_destroy() and reqsk_queue_unlink() should use
del_timer_sync() instead of del_timer() before calling reqsk_put(),
otherwise we could free a req still used by another cpu.

But before doing so, reqsk_queue_destroy() must release syn_wait_lock
spinlock or risk a dead lock, as reqsk_timer_handler() might
need to take this same spinlock from reqsk_queue_unlink() (called from
inet_csk_reqsk_queue_drop())

Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support for sharing GREPROTO_CISCO port was added so that
OVS gre port and kernel GRE devices can co-exist. After
flow-based tunneling patches OVS GRE protocol processing
is completely moved to ip_gre module. so there is no need
for GRE protocol hook. Following patch consolidates
GRE protocol related functions into ip_gre module.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using GRE tunnel meta data collection feature, we can implement
OVS GRE vport. This patch removes all of the OVS
specific GRE code and make OVS use a ip_gre net_device.
Minimal GRE vport is kept to handle compatibility with
current userspace application.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Following patch create new tunnel flag which enable
tunnel metadata collection on given device.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Upon receipt of SYNACK from the server, ipt_SYNPROXY first sends back an ACK to
finish the server handshake, then calls nf_ct_seqadj_init() to initiate
sequence number adjustment of forwarded packets to the client and finally sends
a window update to the client to unblock it's TX queue.

Since synproxy_send_client_ack() does not set synproxy_send_tcp()'s nfct
parameter, no sequence number adjustment happens and the client receives the
window update with incorrect sequence number. Depending on client TCP
implementation, this leads to a significant delay (until a window probe is
being sent).
Signed-off-by: NPhil Sutter <phil@nwl.cc>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

lwtunnel encap is applied for forwarded packets, but not for
locally-generated packets. This is because the output function is not
overridden in __mkroute_output, unlike it is in __mkroute_input.

The lwtunnel state is correctly set on the rth through the call to
rt_set_nexthop, so all that needs to be done is to override the dst
output function to be lwtunnel_output if there is lwtunnel state
present and it requires output redirection.
Signed-off-by: NRobert Shearman <rshearma@brocade.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Multicast dst are not cached. They carry DST_NOCACHE.

As mentioned in commit f8864972 ("ipv4: fix dst race in
sk_dst_get()"), these dst need special care before caching them
into a socket.

Caching them is allowed only if their refcnt was not 0, ie we
must use atomic_inc_not_zero()

Also, we must use READ_ONCE() to fetch sk->sk_rx_dst, as mentioned
in commit d0c294c5 ("tcp: prevent fetching dst twice in early demux
code")

Fixes: 421b3885 ("udp: ipv4: Add udp early demux")
Tested-by: NGregory Hoggarth <Gregory.Hoggarth@alliedtelesis.co.nz>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NGregory Hoggarth <Gregory.Hoggarth@alliedtelesis.co.nz>
Reported-by: NAlex Gartrell <agartrell@fb.com>
Cc: Michal Kubeček <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can use union for most of the temporary cruft (original ipv4/ipv6
address, source mac, physoutdev) since they're used during different
stages of br netfilter traversal.

Also get rid of the last two ->mask users.

Shrinks struct from 48 to 32 on 64bit arch.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch creates sk_set_txhash and eliminates protocol specific
inet_set_txhash and ip6_set_txhash. sk_set_txhash simply sets a
random number instead of performing flow dissection. sk_set_txash
is also allowed to be called multiple times for the same socket,
we'll need this when redoing the hash for negative routing advice.
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When arp is off on a device, and ioctl(SIOCGARP) is queried,
a buggy answer is given with MAC address of the device, instead
of the mac address of the destination/gateway.

We filter out NUD_NOARP neighbours for /proc/net/arp,
we must do the same for SIOCGARP ioctl.

Tested:

lpaa23:~# ./arp 10.246.7.190
MAC=00:01:e8:22:cb:1d      // correct answer

lpaa23:~# ip link set dev eth0 arp off
lpaa23:~# cat /proc/net/arp   # check arp table is now 'empty'
IP address       HW type     Flags       HW address    Mask     Device
lpaa23:~# ./arp 10.246.7.190
MAC=00:1a:11:c3:0d:7f   // buggy answer before patch (this is eth0 mac)

After patch :

lpaa23:~# ip link set dev eth0 arp off
lpaa23:~# ./arp 10.246.7.190
ioctl(SIOCGARP) failed: No such device or address
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NVytautas Valancius <valas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This notification causes the FIB to be updated, which is not needed
because the address already exists, and more importantly it may undo
intentional changes that were made to the FIB after the address was
originally added. (As a point of comparison, when an address becomes
deprecated because its preferred lifetime expired, a notification on
this chain is not generated.)

The motivation for this commit is fixing an incompatibility between
DHCP clients which set and update the address lifetime according to
the lease, and a commercial VPN client which replaces kernel routes
in a way that outbound traffic is sent only through the tunnel (and
disconnects if any further route changes are detected via netlink).
Signed-off-by: NDavid Ward <david.ward@ll.mit.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was reported that update_suffix was taking a long time on systems where
a large number of leaves were attached to a single node.  As it turns out
fib_table_flush was calling update_suffix for each leaf that didn't have all
of the aliases stripped from it.  As a result, on this large node removing
one leaf would result in us calling update_suffix for every other leaf on
the node.

The fix is to just remove the calls to leaf_pull_suffix since they are
redundant as we already have a call in resize that will go through and
update the suffix length for the node before we exit out of
fib_table_flush or fib_table_flush_external.
Reported-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While doing experiments with reordering resilience, we found
linux senders were not able to send at full speed under reordering,
because every incoming SACK was releasing one MSS.

This patch removes the limitation, as we did for CWR state
in commit a0ea700e ("tcp: tso: allow CA_CWR state in
tcp_tso_should_defer()")

Neal Cardwell had a concern about limited transmit so
Yuchung conducted experiments on GFE and found nothing
worth adding an extra check on fast path :

  if (icsk->icsk_ca_state == TCP_CA_Disorder &&
      tcp_sk(sk)->reordering == sysctl_tcp_reordering)
          goto send_now;
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>