- 08 8月, 2019 1 次提交
-
-
由 Takashi Iwai 提交于
The HD-audio core allocates and releases pages via driver's specific dma_alloc_pages and dma_free_pages ops defined in bus->io_ops. This was because some platforms require the uncached pages and the handling of page flags had to be done locally in the driver code. Since the recent change in ALSA core memory allocator, we can simply pass SNDRV_DMA_TYPE_DEV_UC for the uncached pages, and the only difference became about this type to be passed to the core allocator. That is, it's good time for cleaning up the mess. This patch changes the allocation code in HD-audio core to call the core allocator directly so that we get rid of dma_alloc_pages and dma_free_pages io_ops. If a driver needs the uncached pages, it has to set bus->dma_type right after the bus initialization. This is merely a code refactoring and shouldn't bring any behavior changes. Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 7月, 2019 2 次提交
-
-
由 Weitao Hou 提交于
fix lenght to length Link: http://lkml.kernel.org/r/20190521050937.4370-1-houweitaoo@gmail.comSigned-off-by: NWeitao Hou <houweitaoo@gmail.com> Acked-by: NKees Cook <keescook@chromium.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Takashi Iwai 提交于
We apply the codec resume forcibly at system resume callback for updating and syncing the jack detection state that may have changed during sleeping. This is, however, superfluous for the codec like Intel HDMI/DP, where the jack detection is managed via the audio component notification; i.e. the jack state change shall be reported sooner or later from the graphics side at mode change. This patch changes the codec resume callback to avoid the forcible resume conditionally with a new flag, codec->relaxed_resume, for reducing the resume time. The flag is set in the codec probe. Although this doesn't fix the entire bug mentioned in the bugzilla entry below, it's still a good optimization and some improvements are seen. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 7月, 2019 4 次提交
-
-
由 Takashi Iwai 提交于
The recent fix for Icelake HDMI codec introduced the mapping from pin NID to the i915 gfx port number. However, it forgot the reverse mapping from the port number to the pin NID that is used in the ELD notifier callback. As a result, it's processed to a wrong widget and gives a warning like snd_hda_codec_hdmi hdaudioC0D2: HDMI: pin nid 5 not registered This patch corrects it with a proper reverse mapping function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204133 Fixes: b0d8bc50 ("ALSA: hda: hdmi - add Icelake support") Reviewed-by: NKai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
INTEL_GET_VENDOR_VERB is defined twice identically. Let's remove a superfluous line. Fixes: b0d8bc50 ("ALSA: hda: hdmi - add Icelake support") Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The fix for the racy writes and ioctls to sequencer widened the application of client->ioctl_mutex to the whole write loop. Although it does unlock/relock for the lengthy operation like the event dup, the loop keeps the ioctl_mutex for the whole time in other situations. This may take quite long time if the user-space would give a huge buffer, and this is a likely cause of some weird behavior spotted by syzcaller fuzzer. This patch puts a simple workaround, just adding a mutex break in the loop when a large number of events have been processed. This shouldn't hit any performance drop because the threshold is set high enough for usual operations. Fixes: 7bd80091 ("ALSA: seq: More protection for concurrent write and ioctl races") Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hui Wang 提交于
Without this patch, the headset-mic and headphone-mic don't work. Cc: <stable@vger.kernel.org> Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 7月, 2019 4 次提交
-
-
由 Hariprasad Kelam 提交于
This patch fixes below issue reported by coccicheck sound/pci/rme9652/rme9652.c:2161:5-11: Unneeded variable: "result". Return "0" on line 2167 Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hariprasad Kelam 提交于
fix below issue reported by coccicheck sound/pci/emu10k1/emu10k1x.c:1077:5-11: Unneeded variable: "change". Return "0" on line 1092 Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hariprasad Kelam 提交于
Fix below issues reported by coccicheck sound/pci/au88x0/au88x0_a3d.c:821:8-15: Unneeded variable: "changed". Return "1" on line 834 sound/pci/au88x0/au88x0_a3d.c:768:5-12: Unneeded variable: "changed". Return "1" on line 777 sound/pci/au88x0/au88x0_a3d.c:804:5-12: Unneeded variable: "changed". Return "1" on line 813 sound/pci/au88x0/au88x0_a3d.c:786:8-15: Unneeded variable: "changed". Return "1" on line 796 Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
It assigned to wrong model. So, The headphone Mic can't work. Fixes: 3f640970 ("ALSA: hda - Fix headset mic detection problem for several Dell laptops") Signed-off-by: NKailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 7月, 2019 2 次提交
-
-
由 Hariprasad Kelam 提交于
This patch fixes below issue reported by coccicheck sound/ppc/snd_ps3.c:631:5-8: Unneeded variable: "ret". Return "0" on line 668 Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hariprasad Kelam 提交于
This patch fixes below issue reported by coccicheck sound/pci/lx6464es/lx6464es.c:256:5-8: Unneeded variable: "err". Return "0" on line 258 Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 7月, 2019 7 次提交
-
-
由 Takashi Sakamoto 提交于
It's better to use int type for loop index. For consistency, the name of local variable for the number of data block should be plural. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
As a result of former commits, post operation to data block count for cases without CIP_DBC_IS_END_EVENT can be done just with data_block_counter member of amdtp_stream structure. This commit adds code refactoring to obsolete local variable for data block counter. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
When a parser for CIP header returns -EAGAIN, no extra care is needed to probe tracepoints event. This commit adds code refactoring for the error path. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
ALSA: firewire-lib: fix different data block counter between probed event and transferred isochronous packet For IT context, tracepoints event is probed after calculating next data block counter. This brings difference of data block counter between the probed event and actual isochronous packet. This commit fixes it. Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
ALSA: firewire-lib: fix initial value of data block count for IR context without CIP_DBC_IS_END_EVENT For IR context, ALSA IEC 61883-1/6 engine uses initial value of data block counter as UINT_MAX, to detect first isochronous packet in the middle of packet streaming. At present, when CIP_DBC_IS_END_EVENT is not used (i.e. for drivers except for ALSA fireworks driver), the initial value is used as is for tracepoints event. However, the engine can detect the value of dbc field in the payload of first isochronous packet and the value should be assigned to the event. This commit fixes the bug. Fixes: 76864868 ("ALSA: firewire-lib: cache next data_block_counter after probing tracepoints event for IR context") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
ALSA: firewire-lib/fireface: fix initial value of data block counter for IR context with CIP_NO_HEADER For IR context, ALSA IEC 61883-1/6 engine uses initial value of data block counter as UINT_MAX, to detect first isochronous packet in the middle of packet streaming. At present, when CIP_NO_HEADER is used (i.e. for ALSA fireface driver), the initial value is used for tracepoints event. 0x00 should be for the event when the initial value is UINT_MAX because isochronous packets with CIP_NO_HEADER option has no field for data block count. This commit fixes the bug. Fixes: 76864868 ("ALSA: firewire-lib: cache next data_block_counter after probing tracepoints event for IR context") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
Although CIP header is handled as context header, the length of isochronous packet includes two quadlets for its payload. In tracepoints event the value of payload_quadlets should includes the two quadlets. But at present it doesn't. This commit fixes the bug. Fixes: b18f0cfa ("ALSA: firewire-lib: use 8 byte packet header for IT context to separate CIP header from CIP payload") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 7月, 2019 7 次提交
-
-
由 Nicola Lunghi 提交于
Line6 Helix and HX stomp devices don't support retrieving the number of clock sample rate. Add a quirk to set it to 48Khz by default. [ fixed wrong variable initialization changes by tiwai ] Signed-off-by: NNicola Lunghi <nick83ola@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
firewire-motu: fix wrong reference count for stream functionality at error path of rawmidi interface In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA firewire-motu driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: 8edc56ec ("ALSA: firewire-motu: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
ALSA: firewire-digi00x: fix wrong reference count for stream functionality at error path of rawmidi interface In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA firewire-digi00x driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: ae8ffbb2 ("ALSA: firewire-digi00x: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA dice driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: 3cd2c2d7 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA oxfw driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: 4f380d00 ("ALSA: oxfw: configure packet format in pcm.hw_params callback") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
ALSA: fireworks: fix wrong reference count for stream functionality at error path of rawmidi interface In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA fireworks driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: 3d725066 ("ALSA: fireworks: configure sampling transfer frequency in pcm.hw_params callback") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
In IEC 61883-6, several types of sampling data can be multiplexed into payload of common isochronous packet (CIP). For typical audio and music units, PCM samples and MIDI messages are multiplexed into one packet streaming. ALSA bebob driver allows applications of rawmidi interface to start packet streaming for transmission of MIDI messages. However at error path, the reference count of stream functionality is not operated correctly. This can brings a bug that packet streaming is not stopped when all referrers release the count. This commit fixes the bug. Fixes: ac2888b9 ("ALSA: bebob: configure sampling transfer frequency in pcm.hw_params callback") Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 7月, 2019 7 次提交
-
-
由 Kai Vehmanen 提交于
Implement runtime idle for CNL/APL devices using similar runtime PM idle logic as the Intel AZX HDA driver. If any HDA codecs are powered when runtime suspend request comes, return -EBUSY. By doing this, strict ordering is enforced between HDA codec and the HDA controller. Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: NTakashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190702132428.13129-4-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
-
由 Kai Vehmanen 提交于
Add ability to implement a SOF device level runtime idle callback. Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: NTakashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190702132428.13129-3-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
-
由 Kai Vehmanen 提交于
Report codec power status to the HDA codec bus from runtime pm suspend and resume callbacks. This is required to implement runtime idle logic that relies on 'codec_powered' field of hdac_bus to be maintained for all codecs. Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: NTakashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190702132428.13129-2-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>
-
由 Wei Yongjun 提交于
'string' is malloced in sof_dfsentry_write() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: 091c12e1 ("ASoC: SOF: debug: add new debugfs entries for IPC flood test") Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20190705081637.157169-1-weiyongjun1@huawei.comSigned-off-by: NMark Brown <broonie@kernel.org>
-
由 Luca Weiss 提交于
This adds the necessary registers and audio routes to play audio using the Earpiece, that's supported on the A64. Signed-off-by: NLuca Weiss <luca@z3ntu.xyz> Reviewed-by: NChen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20190703184814.27191-1-luca@z3ntu.xyzSigned-off-by: NMark Brown <broonie@kernel.org>
-
由 Colin Ian King 提交于
The variable idx is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190705075303.14692-1-colin.king@canonical.comSigned-off-by: NMark Brown <broonie@kernel.org>
-
由 Srinivas Kandagatla 提交于
Found during review that there are multiple defines of same constants. This patch removes them! Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190704165410.7173-1-srinivas.kandagatla@linaro.orgSigned-off-by: NMark Brown <broonie@kernel.org>
-
- 05 7月, 2019 4 次提交
-
-
由 Colin Ian King 提交于
The variable val is being assigned with a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Also remove a goto statement and a label and replace with a break statement. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Along with the recent fix for the races of snd_hdac_refresh_widgets() it turned out that the instantiation of widgets sysfs at snd_hdac_sysfs_reinit() could cause a race. The race itself was already covered later by extending the mutex protection range, the commit 98482377 ("ALSA: hda: Fix widget_mutex incomplete protection"), but this also indicated that the call of *_reinit() is basically superfluous, as the widgets shall be created sooner or later from snd_hdac_device_register(). This patch removes the redundant call of snd_hdac_sysfs_reinit() at first. By this removal, the sysfs argument itself in snd_hdac_refresh_widgets() becomes superfluous, too, because the only case sysfs=false is always with codec->widgets=NULL. So, we drop this redundant argument as well. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hariprasad Kelam 提交于
this patch fixes below issue reported by coccicheck sound/pci/asihpi/asihpi.c:1558:5-11: Unneeded variable: "change". Return "1" on line 1564 Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Extension Unit (XU) is used to have a compatible layout with Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it for parsing the descriptors. Meanwhile, on UAC2, XU became slightly incompatible with PU; namely, XU has a one-byte bmControls bitmap while PU has two bytes bmControls bitmap. This incompatibility results in the read of a wrong address for the last iExtension field, which ended up with an incorrect string for the mixer element name, as recently reported for Focusrite Scarlett 18i20 device. This patch corrects this misalignment by introducing a couple of new macros and calling them depending on the descriptor type. Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by: NStefan Sauer <ensonic@hora-obscura.de> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 7月, 2019 2 次提交
-
-
由 Colin Ian King 提交于
The variable 'changed' is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Dell headset mode platform with ALC236. It doesn't recording after system resume from S3. S3 mode was deep. s2idle was not has this issue. S3 deep will cut of codec power. So, the register will back to default after resume back. This patch will solve this issue. Signed-off-by: NKailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-