We need to add connectors to the cx231xx graph.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As si2157 doesn't use the subdev, but has instead a binding
logic that doesn't have any core framework, we need to manually
pass the media_device struct via platform data on every place
it is called.

This fixes support for HVR-955Q when MC is enabled.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of having its own routine, use the one defined at the
core, as it is generic enough to handle the cx231xx usecases.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

When in analog mode, the RF connector will be created by
em28xx-video. However, when the device is in digital mode only,
the RF connector is not shown. In this case, let the DVB
core to create it for us.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Except for the usbuvc driver (with has an embedded media_device
struct on it), the other drivers have a pointer to media_device.

On those drivers, replace their own implementation for the core
one. That warrants that those subdev drivers will fill the
media_device info the same way.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a header file for the tvp5150 input connectors constants that
can be shared between the driver and Device Tree source files.

[mchehab@osg.samsung.com: rename tvp5150.h also at em28xx-cards.c]
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of having lots of #ifdefs inside au0828-core due to
V4L2, move the dependencies to au0828-video.c. That allows
removing all those ifdefs, as au0828-video is only compiled if
CONFIG_VIDEO_AU0828_V4L2.

This fixes the following warnings reported by Kbuild test
with a random config with au0828 enabled, but V4L2 is disabled.

All warnings (new ones prefixed by >>):

   drivers/media/usb/au0828/au0828-core.c: In function 'au0828_usb_probe':
>> drivers/media/usb/au0828/au0828-core.c:463:1: warning: label 'done' defined but not used [-Wunused-label]
    done:
    ^
   drivers/media/usb/au0828/au0828-core.c: At top level:
   drivers/media/usb/au0828/au0828-core.c:250:12: warning: 'au0828_create_media_graph' defined but not used [-Wunused-function]
    static int au0828_create_media_graph(struct au0828_dev *dev)
               ^

Tested with a WinTV HVR 950Q (USB ID: 2040:7200)
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

It doesn't make sense to try to create the analog TV graph,
if the device fails to register at V4L2, or if it doesn't have
V4L2 support.

Thanks to Shuah for pointing this issue.
Reported-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now that the core has a function to create the media graph,
we can get rid of the specialized code at em28xx.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of using the DTV properties cache directly, pass the get
frontend data as an argument. For now, everything should remain
the same, but the next patch will prevent get_frontend to
affect the global cache.

This is needed because several drivers don't care enough to only
change the properties if locked. Due to that, calling
G_PROPERTY before locking on those drivers will make them to
never lock. Ok, those drivers are crap and should never be
merged like that, but the core should not rely that the drivers
would be doing the right thing.
Reviewed-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This driver doesn't support getting frontend information and
it only works in automatic mode.

So, let's remove get_frontend() and update the cache at
set_frontend().
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

When remove_pending is non-zero, v4l2_lock is never unlocked.
Signed-off-by: NInsu Yun <wuninsu@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The i2c client pointer is only used when CONFIG_I2C is set, and
otherwise produces a compile-time warning:

drivers/media/usb/hdpvr/hdpvr-core.c: In function 'hdpvr_probe':
drivers/media/usb/hdpvr/hdpvr-core.c:276:21: error: unused variable 'client' [-Werror=unused-variable]

This uses the same #ifdef to hide the variable when the code using
it is hidden.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

SPC 880NC PC camera discussions:
	http://www.pclinuxos.com/forum/index.php/topic,135688.0.html

Cc: stable@vger.kernel.org
Reported-by: NKikim <klucznik0@op.pl>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Sometimes i2c transfer fails. That happens especially when large
amount of data is written sequentially eg. firmware download.
Problem arises with both integrated rtl2832 demod and external
mn88472 demod, which is clear indicator it is busy i2c bus issue.
Use i2c core retry logic in order fix the issue by repeating failed
message. Another solution which also works is to add ~100us delay
between i2c messages - but repeating sounds more elegant and does
not cause any extra delay for success cases.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a new product id to dvb-usb-dvbsky for new version of TechnoTrend CT2-4650 CI
Signed-off-by: NTorbjörn Jansson <torbjorn.jansson@mbox200.swipnet.se>
Reviewed-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

PIP tested with VLC. Diversity tested with the Windows driver.
Signed-off-by: NStefan Pöschel <basic.master@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The Terratec Cinergy S2 USB BOX uses a Montage M88TS2022 tuner
and a M88DS3103 demodulator, same as Technotrend TT-connect S2-4600.
This patch adds the missing USB Product ID to make it work.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

dma_area needs to be freed when the device is closed.

Based on em23xx-audio.c
Signed-off-by: NJean-Baptiste Theou <jtheou@adeneo-embedded.us>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This mxl111sf_tuner_config structure is never modified, so declare it as
const.

There are some indentation changes to remain within 80 columns.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: NMichael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Since kzalloc can be failed,
if not properly handled, NULL dereference could be happened.
Signed-off-by: NInsu Yun <wuninsu@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Since kmalloc can be failed in memory pressure,
if not properly handled, NULL dereference can be happend
Signed-off-by: NInsu Yun <wuninsu@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Let us return directly if the element "status" of the variable "buf"
indicates "BUFSTAT_READY".
A check repetition can be excluded for the variable "ret" at the end then.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This issue was detected by using the Coccinelle software.

1. Let us return directly if a buffer allocation failed.

2. Delete the jump label "err" then.

3. Drop the explicit initialisation for the variable "ret"
   at the beginning.

4. Return zero as a constant at the end.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Calling vb2_set_plane_payload is enough, there's no need to
set the planes[] bytesused field. Remove it.
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use to_video_device() instead of open-coding it.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

There are many dropped fields with some sources, leading to many
redundant fields without counterparts. When this redundant field
is odd, a new frame is pushed containing this odd field interleaved
with whatever was left in the buffer, causing video artifacts.

Do not push a new frame after processing every odd field, but do it
only after those which come after an even field.
Signed-off-by: NNikola Forró <nikola.forro@gmail.com>
Acked-by: NLubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The go7007_hpi_ops structures are never modified, so declare them as const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The as102_priv_ops_t structure is never modified, so declare it as
const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The stv6110x_devctl structure is never modified, so declare it as
const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add the needed bits to make em28xx to create a media
controller graph.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

[ 1841.243670] divide error: 0000 [#1] SMP KASAN
[ 1841.243994] Modules linked in: em28xx_rc rc_core tda18271 drxk em28xx_dvb dvb_core em28xx_alsa mt9v011 em28xx_v4l videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core em28xx tveeprom v4l2_common videodev media cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats parport_pc ppdev lp parport snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha256_ssse3 sha256_generic hmac drbg i915 snd_hda_codec_realtek snd_hda_codec_generic aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd btusb i2c_algo_bit snd_hda_intel btrtl drm_kms_helper btbcm evdev snd_hda_codec btintel psmouse bluetooth pcspkr snd_hwdep sg drm serio_raw
[ 1841.244845]  snd_hda_core snd_pcm mei_me rfkill snd_timer mei snd lpc_ich soundcore shpchp i2c_i801 mfd_core battery dw_dmac i2c_designware_platform i2c_designware_core dw_dmac_core video acpi_pad button tpm_tis tpm ext4 crc16 mbcache jbd2 dm_mod hid_generic usbhid sd_mod ahci libahci libata ehci_pci e1000e xhci_pci ptp scsi_mod ehci_hcd xhci_hcd pps_core fan thermal sdhci_acpi sdhci mmc_core i2c_hid hid [last unloaded: tveeprom]
[ 1841.245342] CPU: 2 PID: 38 Comm: kworker/2:1 Tainted: G        W       4.5.0-rc1+ #43
[ 1841.245413] Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015
[ 1841.245503] Workqueue: events request_module_async [em28xx]
[ 1841.245557] task: ffff88009df10000 ti: ffff88009df18000 task.ti: ffff88009df18000
[ 1841.245626] RIP: 0010:[<ffffffffa135a0ad>]  [<ffffffffa135a0ad>] size_to_scale+0xed/0x2c0 [em28xx_v4l]
[ 1841.245714] RSP: 0018:ffff88009df1faa8  EFLAGS: 00010246
[ 1841.245756] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8803bb933b38
[ 1841.245815] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8803bb933b00
[ 1841.245879] RBP: ffff88009df1fad8 R08: ffff8803bb933b3c R09: 1ffff10077726760
[ 1841.245944] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 1841.246006] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8803b391a130
[ 1841.246071] FS:  0000000000000000(0000) GS:ffff8803c6900000(0000) knlGS:0000000000000000
[ 1841.246141] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1841.246194] CR2: 0000000001d97008 CR3: 00000003bdd85000 CR4: 00000000003406e0
[ 1841.246256] Stack:
[ 1841.246278]  0000000000000246 ffff8803bb9321f0 ffff8803bb932270 ffffffffa136f7a0
[ 1841.246359]  0000000000000000 ffff8803bb932130 ffff88009df1fb20 ffffffffa13646a0
[ 1841.246439]  ffffffffa127f206 ffff8803bb932130 ffff8803bb932130 ffff8803b391a130
[ 1841.246517] Call Trace:
[ 1841.246548]  [<ffffffffa13646a0>] em28xx_set_video_format+0x140/0x1e0 [em28xx_v4l]
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

There are some devices, like Terratec Cinergy HTC, where
while the device supports analog TV, the driver is not
capable yet of handling it, because the analog TV driver
was not written.

So, don't bind the em28xx-v4l drivers on such devices.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The tuner is at address 0x60. This address is not probed by
default by tuner anymore, so we need to explicitly add it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

If something bad happens during device registration, unregister
the already registered devices.

Without that, it will have lots of KASAN errors when udev
would try to open the devices.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The output of a tuner is not only IF frequencies. They may also
output audio on some of its pins, and may even be a zero-IF tuner,
with outputs a baseband. So, rename the PAD name to make it
clearer and add a proper documentation about that at tuner.h.

No functional changes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The em28xx driver have lots of different input types but
only 4 of such types are actually used. The others are bogus.

Remove them, in order to cleanup the driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On em28xx driver, s_stream subdev ops was not implemented
properly. It was used only to disable stream, never enabling it.
That was the root cause of the regression when we added support
for s_stream on tvp5150 driver.

With that, we can get rid of the changes on tvp5150 side,
e. g. changeset 47de9bf8 ('[media] tvp5150: Fix breakage for serial usage').

Tested video output on em2820+tvp5150 on WinTV USB2 and
video and/or vbi output on em288x+tvp5150 on HVR 950.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This issue was detected by using the Coccinelle software.

Return the value from a call of the msi2500_ctrl_msg() function
without using an extra check for the variable "ret" at the end.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now that this was defined at usb-id.h, update the values for
USB_PID_TERRATEC_CINERGY_S2_R1 and USB_PID_TERRATEC_CINERGY_S2_R2.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>