This is a major update to the cyblafb framebuffer driver. Most
of the stuff has been tested in the mm tree.

Main advantages:
============
  - vxres > xres support
  - ywrap and xpan support
  - much faster for almost all modes (e.g. 1280x1024-16bpp
     draws more than 41 full screens of text instead of about 25
     full screens of text per second on authors Epia 5000)
  - module init/exit code fixed
  - bugs triggered by console rotation fixed
  - lots of minor improvements
  - startup modes suitable for high performance scrolling
     in all directions

This diff  also contains a lot of white space fixes.

No side effects are possible, only one single graphics core is affected.
Signed-off-by: NKnut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixed oops after failed netlink socket creation.

Wrong parathenses in if() statement caused err to be 1,
instead of negative value.

Trivial fix, not trivial to find though.
Signed-Off-By: NDmitry Mishin <dim@sw.ru>
Signed-Off-By: NKirill Korotaev <dev@openvz.org>
Signed-Off-By: NLinus Torvalds <torvalds@osdl.org>

__rcu_pending() is rather fat and called twice from rcu_pending().

rcu_pending() has multiple callers, and not that small too.

This patch uninlines both of them.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Acked-by: NPaul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Manual merge for trivial #include changes

This patch allows ipw2100 driver to advertise the WPA-related encryption
options that it does really support.  It's necessary to work correctly
with NetworkManager and other programs that actually check driver & card
capabilities.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

These warnings are emitted if non-modular network drivers are built.
Fixes just move cleanup_card() definitions into #ifdef MODULE region.

/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/wd.c:131: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/3c503.c:152: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/ne.c:216: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/hp.c:106: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/hp-plus.c:142: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/smc-ultra.c:172: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/e2100.c:144: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/es3210.c:159: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/lne390.c:149: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/lance.c:313: warning: 'cleanup_card' defined but not used
/.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/ac3200.c:127: warning: 'cleanup_card' defined but not used
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This contains a bug fix for large buffers.  Originally, if a tx buffer to
be sent was larger then the maximum size of the tx descriptor, it would
overwrite other control bits.  In this patch, the buffer is split over
multiple descriptors.  Also, the fragments are now setup in forward order.
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Remove bouncing mail address of mv643xx maintainer.
Signed-off-by: NOlaf Hering <olh@suse.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Fix an invalid memory reference in the e1000 driver which would cause
kernel panic.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: Jeb Cramer <cramerj@intel.com>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

"extern inline" doesn't make much sense.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

"extern inline" doesn't make much sense.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch fixes a wrong indentation.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Add MIPS dependency for dm9000 ethernet controller.  Indeed this controller
is used by some embedded platforms based on MIPS CPUs.
Signed-off-by: NFranck Bui-Huu <franck.bui@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

ifenslave, as of abi version 2, does not set the ip address on the slave
interfaces.  The documentation example however still shows that the
ensalved interfaces should have the same IP as the master.  The patch
simply removes the lines from the example which should no longer appear.
Signed-off-by: NEric Paris <eparis@redhat.com>

 bonding.txt |    2 --
 1 files changed, 2 deletions(-)
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

A BIOS bug affecting some multiport tulip NICs requires an irq fixup
in tulip_core.c.  This has only been enabled for i686, but it is
needed for x86_64 as well.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch works around a problem with spurious interrupts seen at boot time when
a MAXTOR 6H500F0 drive is present.  An ATA interrupt condition is mysteriously
present at start of day.  If we took too long in issuing the first command,
the kernel would basically get tired of the spurious interrupts and turn the interrupt
off.  Issuing the first command essentially causes the interrupt condition to
get acknowledged.

I haven't seen this happen with any other drives.

What I basically do is ack ATA status by reading it regardless of whether we're
expecting to have to handle an interrupt.  This clears the start-of-day anomalous
interrupt condition, and keeps the kernel from disabling that interrupt due to
too many spurious interrupts.

Also, I fixed a bug where hotplug interrupts weren't getting acknowledged as handled
in the ISR.  This was not the cause of the spurious interrupts, but it's the right
thing to do anyway.

Signed-Off-By: Andrew Chew
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Disable TX status deferral (EMACx_MR[MWSW=001]) in half-duplex mode.
I have two reports when EMAC stops transmitting when connected to a
hub. TX ring debug printouts show complete mess when this happens,
probably hardware collision handling doesn't work quite well in this
mode.

This is relevant only for SoCs with EMAC4 core (440GX, 440SP, 440SPe).
Tested on 440GX.
Signed-off-by: NEugene Surovegin <ebs@ebshome.net>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch fixes some of the ieee80211 crypto related code so that
instead of having the host fully do crypto operations, the host_build_iv
flag works properly (for WEP in this patch) which, if turned on,
requires the hardware to do all crypto operations, but the ieee80211
layer builds the IV. The hardware also has to build the ICV.

Previously, the host_build_iv flag couldn't be used at all for WEP, and
not alone (with both host_decrypt and host_encrypt disabled) because the
crypto algorithm wasn't assigned. This is also fixed.

I have tested this patch both in host crypto mode and in hw crypto mode
(with the Broadcom chipset).

[resent, signing digitally caused it to be MIME-junked, sorry]
Signed-Off-By: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Don't enable the pci device twice (already done in the probe
routine).  Propogate the error codes from pci_request_region
back to initial probing.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The sk98lin driver doesn't do proper error number handling
during initialization. Note: -EAGAIN is a bogus return value for
hardware errors.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Trivial use of kzalloc.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Sk98lin driver error recovery on two port boards is bad.
If it fails the second allocation, it will not release resources
properly. Also it registers the second port in the pci driver data

If second port fails, might as well go with one port.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Sk98lin 64bit memory handling is wrong. It doesn't set the
highdma flag; i.e. the kernel always does bounce buffers.
It doesn't fallback to 32 bit mask if it can't get 64 bit mask.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Sk98lin driver has a routine marked __init that is called from
the probe code. If using pci hotplug, this could be called after
the initialization so it needs to be marked __devinit.
So if you hot added a sk98lin board, the kernel would crash.
I don't have hot plug hardware to actually try this feat.

Also, there are two routines, only called from SkGeBoardInit that can
be marked __devinit.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NJens Axboe <axboe@suse.de>

This patch makes IDE use the new blk_complete_request() interface.
There's still room for improvement, as __ide_end_request() really
could drop the lock after getting HWGROUP->rq (why does it need to
hold it in the first place? If ->rq access isn't serialized, we are
screwed anyways).
Signed-off-by: NJens Axboe <axboe@suse.de>

This patch moves the SCSI softirq handling to the block layer version.
There should be no functional changes.
Signed-off-by: NJens Axboe <axboe@suse.de>

Request completion can be a quite heavy process, since it needs to
iterate through the entire request and complete the bio's it holds.
This patch adds blk_complete_request() which moves this processing
into a dedicated block softirq.
Signed-off-by: NJens Axboe <axboe@suse.de>

It's a broken interface, it's done way too late. And apparently it triggers
slab problems in recent kernels as well (most likely after the generic dispatch
code was merged). So kill it, ide-cd is the only user of it.
Signed-off-by: NJens Axboe <axboe@suse.de>

Signed-off-by: NJens Axboe <axboe@suse.de>

For SG_IO requests, bio->bi_bdev may not be explicitly initialized. So make
bio_init() clear the field to make sure it's always NULL or valid.
Signed-off-by: NJens Axboe <axboe@suse.de>

elv_try_last_merge().
Signed-off-by: NCoywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: NJens Axboe <axboe@suse.de>

linux/blkdev.h included twice
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NJens Axboe <axboe@suse.de>

We don't set CONFIG_PPC_MULTIPLATFORM on iSeries (yet).  Avoid
compiling in the prom_init stuff on iSeries.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In add_memory() we should be using __va() to get a virtual address.
Spotted by Mike Kravetz.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The CONFIG_PPC_OF symbol is used to mean that the firmware device tree
access functions are available.  Since we always have a device tree
with ARCH=powerpc, make CONFIG_PPC_OF always Y for ARCH=powerpc.

This fixes some compile errors reported by Kumar Gala, but in a
different way to his patch.  This also makes prom_parse.o be compiled
only if CONFIG_PPC_OF so that non-OF ARCH=ppc platforms will compile.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When taking a DABR exception we were reporting the PC. It makes more
sense to report the address that caused the exception, and the gdb guys
would like it that way.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>