提交 · 614b05900ec3516b835cd06f848ef6bc915beeea · openeuler / Kernel

21 1月, 2010 1 次提交

tg3: Enable PLL PD when CLKREQ disabled for 5717A0 · 614b0590

由 Matt Carlson 提交于 1月 20, 2010

PCIe PLL power down cannot be used if CLKREQ is enabled because data
corruption will occur.  If CLKREQ is disabled though, enabling PCIE P1
PLL power-down saves some power.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Reviewed-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

614b0590

19 1月, 2010 1 次提交

ppp_generic.c severly whitespace damanged by · fa44a73c

由 Lennart Sorensen 提交于 1月 18, 2010

I was just looking at ppp_generic, and noticed that it fairly recently
(as in the last year) got rather mangled with many spaces turned into tabs
in places they very much shouldn't have been.  I tracked it down to commit
9c705260 (ppp: ppp_mp_explode() redesign).

I am amazed if that patch passed the patch checking script.  I have no
idea what kind of weird editor setting did this, but it has to have been a
weird editor setting or a very unfortunate search and replace gone wrong.
I only found it trying to apply a patch I was playing with and wondering
why it wouldn't apply.  Then I found there were tabs in the middle of
comments that used to be spaces.

Well here is a patch that should fix it up as far as I can tell.

Purely whitespace repair.  No actual code changes.
Signed-off-by: NLen Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fa44a73c

18 1月, 2010 4 次提交

drivers/net: Eliminate useless code · 2ae3111e

由 Julia Lawall 提交于 1月 18, 2010

The variable qdev is initialized twice to the same (side effect-free)
expression.  Drop one initialization.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@forall@
idexpression *x;
identifier f!=ERR_PTR;
@@

x = f(...)
... when != x
(
x = f(...,<+...x...+>,...)
|
* x = f(...)
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

2ae3111e

bnx2: Save statistics during reset. · 354fcd77

由 Michael Chan 提交于 1月 17, 2010

MTU changes, ring size changes, etc cause the chip to be reset and the
statisctics flushed.  To keep track of the accumulated statistics, we
add code to save the whole statistics block before reset.  We also
modify the macros and statistics functions to return the sum of the
saved and current counters.

Based on original patch by Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

354fcd77

bnx2: Refine statistics code. · a4743058

由 Michael Chan 提交于 1月 17, 2010

Refine the statistics macros by passing in just the name of the
counter field.  This makes it a lot easier and cleaner to add
counters saved before the last reset in the next patch.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

a4743058

net: spread __net_init, __net_exit · 2c8c1e72

由 Alexey Dobriyan 提交于 1月 17, 2010

__net_init/__net_exit are apparently not going away, so use them
to full extent.

In some cases __net_init was removed, because it was called from
__net_exit code.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

2c8c1e72

16 1月, 2010 34 次提交

NET: Add Qlogic ethernet driver for CNA devices · 0ec00f03

由 Amit Kumar Salecha 提交于 1月 13, 2010

o Separate Ethernet driver for Qlogic CNA devices
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

0ec00f03

qlcnic: Qlogic ethernet driver for CNA devices · af19b491

由 Amit Kumar Salecha 提交于 1月 13, 2010

o 1G/10G Ethernet Driver for Qlgic QLE8240 and QLE8242 CNA devices.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

af19b491

macvlan: add GRO bit to features mask · 6eb3a855

由 Patrick Mullaney 提交于 1月 16, 2010

Allow macvlan devices to support GRO.
Signed-off-by: NPatrick Mullaney <pmullaney@novell.com>
Acked-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

6eb3a855

qlge: Add module param to force firmware core dump. · d5c1da56

由 Ron Mercer 提交于 1月 15, 2010

Default setting is 'off', don't allow force firmware dump.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

d5c1da56

qlge: Add xgmac reg blocks to firwmare dump. · a2f98232

由 Ron Mercer 提交于 1月 15, 2010

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

a2f98232

qlge: Add serdes reg blocks dump to firmware dump. · a48c86fd

由 Ron Mercer 提交于 1月 15, 2010

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

a48c86fd

qlge: Add alternate function's reg dump to fw dump. · 24bb55b4

由 Ron Mercer 提交于 1月 15, 2010

Get the 2nd (other) nic function register values.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

24bb55b4

qlge: Add RAM dump to firmware dump. · 2c1f73c3

由 Ron Mercer 提交于 1月 15, 2010

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

2c1f73c3

qlge: Add probe regs to firmware dump. · c89ec8b9

由 Ron Mercer 提交于 1月 15, 2010

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

c89ec8b9

qlge: Add basic firmware dump. · 8aae2600

由 Ron Mercer 提交于 1月 15, 2010

Adding the infrstructure and basic data for the firmware
core dump.
The firmware coredump is turned OFF by default.  There will be no
memory allocations for data dumps to the log.
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

8aae2600

qlge: Add data for firmware dump. · b87babeb

由 Ron Mercer 提交于 1月 15, 2010

Signed-off-by: NRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

b87babeb

R
b43: N-PHY: drop unused definition, uncomment needed call · 730dd705
由 Rafał Miłecki 提交于 1月 15, 2010
```
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
```
730dd705

b43: N-PHY: implement TX power control coef setup · 6dcd9d91

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

6dcd9d91

b43: N-PHY: add RX IQ calibrationi for rev < 3 · 15931e31

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

15931e31

b43: N-PHY: add huge calculating TX IQ LO · fb43b8e2

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

fb43b8e2

b43: N-PHY: implement calculating IQ gain params · e9762492

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

e9762492

b43: N-PHY: update TX calibration ladder · de7ed0c6

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

de7ed0c6

b43: N-PHY: add RX radio cores calibration · c4a92003

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

c4a92003

b43: N-PHY: add TX LP FBW (TX filter 40 related) · fe3e46e8

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

fe3e46e8

b43: N-PHY: implement getting TX gains · b0022e15

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

b0022e15

b43: N-PHY: implement calculating RX IQ comp · 34a56f2c

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

34a56f2c

b43: N-PHY: implement RX IQ estimation · 2faa6b83

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

2faa6b83

R
b43: N-PHY: implement restoring general configuration · 2f258b74
由 Rafał Miłecki 提交于 1月 15, 2010
```
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>a
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
```
2f258b74

b43: N-PHY: implement workaround for TX IQ · 09146400

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

09146400

b43: N-PHY: implement RX IQ coeffs · a67162ab

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

a67162ab

R
b43: N-PHY: add function than forces (not) staying in carrier search · 5c1a140a
由 Rafał Miłecki 提交于 1月 15, 2010
```
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
```
5c1a140a

b43: N-PHY: add RSSI calibration restore · 42e1547e

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>`
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

42e1547e

R
b43: N-PHY: implement PA overriding (RF control related) · e50cbcf6
由 Rafał Miłecki 提交于 1月 15, 2010
```
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
```
e50cbcf6

b43: N-PHY: RSSI calibration for rev < 3 · 90b9738d

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

90b9738d

R
b43: N-PHY: add RSSI polling and setting 2055 (radio) VCM · dfb4aa5d
由 Rafał Miłecki 提交于 1月 15, 2010
```
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
```
dfb4aa5d
R
b43: N-PHY: implement RSSI selection and offset scaling · 3c95627d
由 Rafał Miłecki 提交于 1月 15, 2010
```
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
```
3c95627d
R
b43: N-PHY: add clip detection reading/writing and some classifier function · bbec398c
由 Rafał Miłecki 提交于 1月 15, 2010
```
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
```
bbec398c
R
b43: N-PHY: split RSSI calibration into 2 functions (rev2, rev3) · 4cb99775
由 Rafał Miłecki 提交于 1月 15, 2010
```
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
```
4cb99775

b43: N-PHY: update CCA reset · 4a933c85

由 Rafał Miłecki 提交于 1月 15, 2010

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

4a933c85

openeuler / Kernel 1 年多 前同步成功

openeuler / Kernel
1 年多前同步成功