- 14 8月, 2013 8 次提交
-
-
由 Jie Liu 提交于
Revert commit 40bd62eb ("fs/ocfs2/journal.h: add bits_wanted while calculating credits in ocfs2_calc_extend_credits"). Unfortunately this change broke fallocate even if there is insufficient disk space for the preallocation, which is a serious problem. # df -h /dev/sda8 22G 1.2G 21G 6% /ocfs2 # fallocate -o 0 -l 200M /ocfs2/testfile fallocate: /ocfs2/test: fallocate failed: No space left on device and a kernel warning: CPU: 3 PID: 3656 Comm: fallocate Tainted: G W O 3.11.0-rc3 #2 Call Trace: dump_stack+0x77/0x9e warn_slowpath_common+0xc4/0x110 warn_slowpath_null+0x2a/0x40 start_this_handle+0x6c/0x640 [jbd2] jbd2__journal_start+0x138/0x300 [jbd2] jbd2_journal_start+0x23/0x30 [jbd2] ocfs2_start_trans+0x166/0x300 [ocfs2] __ocfs2_extend_allocation+0x38f/0xdb0 [ocfs2] ocfs2_allocate_unwritten_extents+0x3c9/0x520 __ocfs2_change_file_space+0x5e0/0xa60 [ocfs2] ocfs2_fallocate+0xb1/0xe0 [ocfs2] do_fallocate+0x1cb/0x220 SyS_fallocate+0x6f/0xb0 system_call_fastpath+0x16/0x1b JBD2: fallocate wants too many credits (51216 > 4381) Signed-off-by: NJie Liu <jeff.liu@oracle.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lothar Waßmann 提交于
It's always a bad idea to poll on HW bits without a timeout. The i.MX28 RTC can be easily brought into a state in which the RTC is not running (until after a power-on-reset) and thus the status bits which are polled in the driver won't ever change. This patch prevents the kernel from getting stuck in this case. Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de> Acked-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Dave has reported the following lockdep splat: ================================= [ INFO: inconsistent lock state ] 3.11.0-rc1+ #9 Not tainted --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/49 [HC0[0]:SC0[0]:HE1:SE1] takes: (&mapping->i_mmap_mutex){+.+.?.}, at: [<c114971b>] page_referenced+0x87/0x5e3 {RECLAIM_FS-ON-W} state was registered at: mark_held_locks+0x81/0xe7 lockdep_trace_alloc+0x5e/0xbc __alloc_pages_nodemask+0x8b/0x9b6 __get_free_pages+0x20/0x31 get_zeroed_page+0x12/0x14 __pmd_alloc+0x1c/0x6b huge_pmd_share+0x265/0x283 huge_pte_alloc+0x5d/0x71 hugetlb_fault+0x7c/0x64a handle_mm_fault+0x255/0x299 __do_page_fault+0x142/0x55c do_page_fault+0xd/0x16 error_code+0x6c/0x74 irq event stamp: 3136917 hardirqs last enabled at (3136917): _raw_spin_unlock_irq+0x27/0x50 hardirqs last disabled at (3136916): _raw_spin_lock_irq+0x15/0x78 softirqs last enabled at (3136180): __do_softirq+0x137/0x30f softirqs last disabled at (3136175): irq_exit+0xa8/0xaa other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&mapping->i_mmap_mutex); <Interrupt> lock(&mapping->i_mmap_mutex); *** DEADLOCK *** no locks held by kswapd0/49. stack backtrace: CPU: 1 PID: 49 Comm: kswapd0 Not tainted 3.11.0-rc1+ #9 Hardware name: Dell Inc. Precision WorkStation 490 /0DT031, BIOS A08 04/25/2008 Call Trace: dump_stack+0x4b/0x79 print_usage_bug+0x1d9/0x1e3 mark_lock+0x1e0/0x261 __lock_acquire+0x623/0x17f2 lock_acquire+0x7d/0x195 mutex_lock_nested+0x6c/0x3a7 page_referenced+0x87/0x5e3 shrink_page_list+0x3d9/0x947 shrink_inactive_list+0x155/0x4cb shrink_lruvec+0x300/0x5ce shrink_zone+0x53/0x14e kswapd+0x517/0xa75 kthread+0xa8/0xaa ret_from_kernel_thread+0x1b/0x28 which is a false positive caused by hugetlb pmd sharing code which allocates a new pmd from withing mapping->i_mmap_mutex. If this allocation causes reclaim then the lockdep detector complains that we might self-deadlock. This is not correct though, because hugetlb pages are not reclaimable so their mapping will be never touched from the reclaim path. The patch tells lockup detector that hugetlb i_mmap_mutex is special by assigning it a separate lockdep class so it won't report possible deadlocks on unrelated mappings. [peterz@infradead.org: comment for annotation] Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: NMinchan Kim <minchan@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
Fix a BUG which can trigger when direct-IO is used with AOE. As discussed previously, the fact that some users of the block layer provide bios that point to pages with a zero _count means that it is not OK for the network layer to do a put_page on the skb frags during an skb_linearize, so the aoe driver gets a reference to pages in bios and puts the reference before ending the bio. And because it cannot use get_page on a page with a zero _count, it manipulates the value directly. It is not OK to increment the _count of a compound page tail, though, since the VM layer will VM_BUG_ON a non-zero _count. Block users that do direct I/O can result in the aoe driver seeing compound page tails in bios. In that case, the same logic works as long as the head of the compound page is used instead of the tails. This patch handles compound pages and does not BUG. It relies on the block layer user leaving the relationship between the page tail and its head alone for the duration between the submission of the bio and its completion, whether successful or not. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Simek 提交于
Fix inadvertent breakage in the clone syscall ABI for Microblaze that was introduced in commit f3268edb ("microblaze: switch to generic fork/vfork/clone"). The Microblaze syscall ABI for clone takes the parent tid address in the 4th argument; the third argument slot is used for the stack size. The incorrectly-used CLONE_BACKWARDS type assigned parent tid to the 3rd slot. This commit restores the original ABI so that existing userspace libc code will work correctly. All kernel versions from v3.8-rc1 were affected. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
Andy reported that if file page get reclaimed we lose the soft-dirty bit if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address get encoded into pte entry. Thus when #pf happens on such non-present pte we can restore it back. Reported-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
Andy Lutomirski reported that if a page with _PAGE_SOFT_DIRTY bit set get swapped out, the bit is getting lost and no longer available when pte read back. To resolve this we introduce _PTE_SWP_SOFT_DIRTY bit which is saved in pte entry for the page being swapped out. When such page is to be read back from a swap cache we check for bit presence and if it's there we clear it and restore the former _PAGE_SOFT_DIRTY bit back. One of the problem was to find a place in pte entry where we can save the _PTE_SWP_SOFT_DIRTY bit while page is in swap. The _PAGE_PSE was chosen for that, it doesn't intersect with swap entry format stored in pte. Reported-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: NMinchan Kim <minchan@kernel.org> Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Vagin 提交于
struct memcg_cache_params has a union. Different parts of this union are used for root and non-root caches. A part with destroying work is used only for non-root caches. I fixed the same problem in another place v3.9-rc1-16204-gf101a946, but didn't notice this one. This patch fixes the kernel panic: [ 46.848187] BUG: unable to handle kernel paging request at 000000fffffffeb8 [ 46.849026] IP: [<ffffffff811a484c>] kmem_cache_destroy_memcg_children+0x6c/0xc0 [ 46.849092] PGD 0 [ 46.849092] Oops: 0000 [#1] SMP ... Signed-off-by: NAndrey Vagin <avagin@openvz.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@vger.kernel.org> [3.9.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 8月, 2013 3 次提交
-
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French: "A set of small cifs fixes, including 3 relating to symlink handling" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: don't instantiate new dentries in readdir for inodes that need to be revalidated immediately cifs: set sb->s_d_op before calling d_make_root() cifs: fix bad error handling in crypto code cifs: file: initialize oparms.reconnect before using it Do not attempt to do cifs operations reading symlinks with SMB2 cifs: extend the buffer length enought for sprintf() using
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull more ext4 bugfixes from Ted Ts'o: "A number of miscellaneous ext4 bugs fixes for v3.11, including a fix so that if ext4 is built as a module, to allow it to be unloaded" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT ext4: fix mount/remount error messages for incompatible mount options ext4: allow the mount options nodelalloc and data=journal
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull w/w mutex deadlock injection fix from Ingo Molnar. This bug made the CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y option largely useless, but wouldn't affect normal users. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Fix w/w mutex deadlock injection
-
- 12 8月, 2013 6 次提交
-
-
由 Theodore Ts'o 提交于
Previously we weren't swapping only some of the extent_status LRU fields during the processing of the EXT4_IOC_SWAP_BOOT ioctl. The much safer thing to do is to just completely flush the extent status tree when doing the swap. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Zheng Liu <gnehzuil.liu@gmail.com> Cc: stable@vger.kernel.org
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is three bug fixes: An fnic warning caused by sleeping under a lock, a major regression with our updated WRITE SAME/UNMAP logic which caused tons of USB devices (and one RAID card) to cease to function and a megaraid_sas firmware initialisation problem which causes kdump failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] Don't attempt to send extended INQUIRY command if skip_vpd_pages is set [SCSI] fnic: BUG: sleeping function called from invalid context during probe [SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Ben Herrenschmidt: "This includes small series from Michael Neuling to fix a couple of nasty remaining problems with the new Power8 support, also targeted at stable 3.10, without which some new userspace accessible registers aren't properly context switched, and in some case, can be clobbered by the user of transactional memory. Along with that, a few slightly more minor things, such as a missing Kconfig option to enable handling of denorm exceptions when not running under a hypervisor (or userspace will randomly crash when hitting denorms with the vector unit), some nasty bugs in the new pstore oops code, and other simple bug fixes worth having in now. Note: I picked up the two powerpc KVM fixes as Alex Graf asked me to handle KVM bits while he is on vacation. However I'll let him decide whether they should go to -stable or not when he is back" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs powerpc: Save the TAR register earlier powerpc: Fix context switch DSCR on POWER8 powerpc: Rework setting up H/FSCR bit definitions powerpc: Fix hypervisor facility unavaliable vector number powerpc/kvm/book3s_pr: Return appropriate error when allocation fails powerpc/kvm: Add signed type cast for comparation powerpc/eeh: Add missing procfs entry for PowerNV powerpc/pseries: Add backward compatibilty to read old kernel oops-log powerpc/pseries: Fix buffer overflow when reading from pstore powerpc: On POWERNV enable PPC_DENORMALISATION by default
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull s390 kvm fixes from Paolo Bonzini: "Two fixes for s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix pfmf non-quiescing control handling KVM: s390: move kvm_guest_enter,exit closer to sie
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Some driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mv64xxx: Document the newly introduced allwinner compatible i2c: Fix Kontron PLD prescaler calculation i2c: i2c-mxs: Use DMA mode even for small transfers
-
- 11 8月, 2013 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "These are assorted fixes, mostly from Josef nailing down xfstests runs. Zach also has a long standing fix for problems with readdir wrapping f_pos (or ctx->pos) These patches were spread out over different bases, so I rebased things on top of rc4 and retested overnight" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: don't loop on large offsets in readdir Btrfs: check to see if root_list is empty before adding it to dead roots Btrfs: release both paths before logging dir/changed extents Btrfs: allow splitting of hole em's when dropping extent cache Btrfs: make sure the backref walker catches all refs to our extent Btrfs: fix backref walking when we hit a compressed extent Btrfs: do not offset physical if we're compressed Btrfs: fix extent buffer leak after backref walking Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: - Stable patch for lockd to fix Oopses due to inappropriate calls to utsname()->nodename - Stable patches for sunrpc to fix Oopses on shutdown when using AF_LOCAL sockets with rpcbind - Fix memory leak and error checking issues in nfs4_proc_lookup_mountpoint - Fix a regression with the sync mount option failing to work for nfs4 mounts - Fix a writeback performance issue when doing cache invalidation - Remove an incorrect call to nfs_setsecurity in nfs_fhget * tag 'nfs-for-3.11-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix up nfs4_proc_lookup_mountpoint NFS: Remove unnecessary call to nfs_setsecurity in nfs_fhget() NFSv4: Fix the sync mount option for nfs4 mounts NFS: Fix writeback performance issue on cache invalidation SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister SUNRPC: Don't auto-disconnect from the local rpcbind socket LOCKD: Don't call utsname()->nodename from nlmclnt_setlockargs
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd fixes from Bruce Fields: "Some fixes for a 4.1 feature that in retrospect probably should have waited for 3.12.... But it appears to be working now" * 'for-3.11' of git://linux-nfs.org/~bfields/linux: nfsd: Fix SP4_MACH_CRED negotiation in EXCHANGE_ID nfsd4: Fix MACH_CRED NULL dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A couple of USB-audio fixes that should also go to stable kernels" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: do not trust too-big wMaxPacketSize values ALSA: 6fire: fix DMA issues with URB transfer_buffer usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing huge, two IIO driver fixes, and a zcache fix. All of these have been in linux-next for a while" * tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: zcache: fix "zcache=" kernel parameter iio: ti_am335x_adc: Fix wrong samples received on 1st read iio:trigger: Fix use_count race condition
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are 3 small USB fixes for 3.11-rc5. One is a fix that the ChromeOS developers ran into on some Intel hardware, one is a build fix, and the last is a MAINTAINERS update to help people figure out where to send USB network driver patches. All of these have been in linux-next for a while" * tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: MAINTAINERS: Add separate section for USB NETWORKING DRIVERS usb: xhci: add missing dma-mapping.h includes usb: core: don't try to reset_device() a port that got just disconnected
-
- 10 8月, 2013 17 次提交
-
-
由 Zach Brown 提交于
When btrfs readdir() hits the last entry it sets the readdir offset to a huge value to stop buggy apps from breaking when the same name is returned by readdir() with concurrent rename()s. But unconditionally setting the offset to INT_MAX causes readdir() to loop returning any entries with offsets past INT_MAX. It only takes a few hours of constant file creation and removal to create entries past INT_MAX. So let's set the huge offset to LLONG_MAX if the last entry has already overflowed 32bit loff_t. Without large offsets behaviour is identical. With large offsets 64bit apps will work and 32bit apps will be no more broken than they currently are if they see large offsets. Signed-off-by: NZach Brown <zab@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
A user reported a panic when running with autodefrag and deleting snapshots. This is because we could end up trying to add the root to the dead roots list twice. To fix this check to see if we are empty before adding ourselves to the dead roots list. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
The ceph guys tripped over this bug where we were still holding onto the original path that we used to copy the inode with when logging. This is based on Chris's fix which was reported to fix the problem. We need to drop the paths in two cases anyway so just move the drop up so that we don't have duplicate code. Thanks, Cc: stable@vger.kernel.org Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
I noticed while running multi-threaded fsync tests that sometimes fsck would complain about an improper gap. This happens because we fail to add a hole extent to the file, which was happening when we'd split a hole EM because btrfs_drop_extent_cache was just discarding the whole em instead of splitting it. So this patch fixes this by allowing us to split a hole em properly, which means that added holes actually get logged properly and we no longer see this fsck error. Thankfully we're tolerant of these sort of problems so a user would not see any adverse effects of this bug, other than fsck complaining. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
Because we don't mess with the offset into the extent for compressed we will properly find both extents for this case [extent a][extent b][rest of extent a] but because we already added a ref for the front half we won't add the inode information for the second half. This causes us to leak that memory and not print out the other offset when we do logical-resolve. So fix this by calling ulist_add_merge and then add our eie to the existing entry if there is one. With this patch we get both offsets out of logical-resolve. With this and the other 2 patches I've sent we now pass btrfs/276 on my vm with compress-force=lzo set. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
If you do btrfs inspect-internal logical-resolve on a compressed extent that has been partly overwritten it won't find anything. This is because we try and match the extent offset we've searched for based on the extent offset in the data extent entry. However this doesn't work for compressed extents because the offsets are for the uncompressed size, not the compressed size. So instead only do this check if we are not compressed, that way we can get an actual entry for the physical offset rather than nothing for compressed. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Josef Bacik 提交于
xfstest btrfs/276 was freaking out on slower boxes partly because fiemap was offsetting the physical based on the extent offset. This is perfectly fine with uncompressed extents, however the extent offset is into the uncompressed area, not the compressed. So we can return a physical value that isn't at all within the area we have allocated on disk. Fix this by returning the start of the extent if it is compressed no matter what the offset. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
commit 47fb091f(Btrfs: fix unlock after free on rewinded tree blocks) takes an extra increment on the reference of allocated dummy extent buffer, so now we cannot free this dummy one, and end up with extent buffer leak. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Liu Bo 提交于
For partial extents, snapshot-aware defrag does not work as expected, since a) we use the wrong logical offset to search for parents, which should be disk_bytenr + extent_offset, not just disk_bytenr, b) 'offset' returned by the backref walking just refers to key.offset, not the 'offset' stored in btrfs_extent_data_ref which is (key.offset - extent_offset). The reproducer: $ mkfs.btrfs sda $ mount sda /mnt $ btrfs sub create /mnt/sub $ for i in `seq 5 -1 1`; do dd if=/dev/zero of=/mnt/sub/foo bs=5k count=1 seek=$i conv=notrunc oflag=sync; done $ btrfs sub snap /mnt/sub /mnt/snap1 $ btrfs sub snap /mnt/sub /mnt/snap2 $ sync; btrfs filesystem defrag /mnt/sub/foo; $ umount /mnt $ btrfs-debug-tree sda (Here we can check whether the defrag operation is snapshot-awared. This addresses the above two problems. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Jie Liu 提交于
Create a small file and fallocate it to a big size with FALLOC_FL_KEEP_SIZE option, then truncate it back to the small size again, the disk free space is not changed back in this case. i.e, total 4 -rw-r--r-- 1 root root 512 Jun 28 11:35 test Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 56K 7.2G 1% /mnt -rw-r--r-- 1 root root 512 Jun 28 11:35 /mnt/test Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 5.1G 2.2G 70% /mnt Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 5.1G 2.2G 70% /mnt With this fix, the truncated up space is back as: Filesystem Size Used Avail Use% Mounted on .... /dev/sdb1 8.0G 56K 7.2G 1% /mnt Signed-off-by: NJie Liu <jeff.liu@oracle.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: - ACPI-based memory hotplug stopped working after a recent change, because it's not possible to associate sufficiently many "physical" devices with one ACPI device object due to an artificial limit. Fix from Rafael J Wysocki removes that limit and makes memory hotplug work again. - A change made in 3.9 uncovered a bug in the ACPI processor driver preventing NUMA nodes from being put offline due to an ordering issue. Fix from Yasuaki Ishimatsu changes the ordering to make things work again. - One of the recent ACPI video commits (that hasn't been reverted so far) uncovered a bug in the code handling quirky BIOSes that caused some Asus machines to boot with backlight completely off which made it quite difficult to use them afterward. Fix from Felipe Contreras improves the quirk to cover this particular case correctly. - A cpufreq user space interface change made in 3.10 inadvertently renamed the ignore_nice_load sysfs attribute to ignore_nice which resulted in some confusion. Fix from Viresh Kumar changes the name back to ignore_nice_load. - An initialization ordering change made in 3.9 broke cpufreq on loongson2 boards. Fix from Aaro Koskinen restores the correct initialization ordering there. - Fix breakage resulting from a mistake made in 3.9 and causing the detection of some graphics adapters (that were detected correctly before) to fail. There are two objects representing the same PCIe port in the affected systems' ACPI tables and both appear as "enabled" and we are expected to guess which one to use. We used to choose the right one before by pure luck, but when we tried to address another similar corner case, the luck went away. This time we try to make our guessing a bit more educated which is reported to work on those systems. - The /proc/acpi/wakeup interface code is missing some locking which may lead to breakage if that file is written or read during hotplug of wakeup devices. That should be rare but still possible, so it's better to start using the appropriate locking there. * tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Try harder to resolve _ADR collisions for bridges cpufreq: rename ignore_nice as ignore_nice_load cpufreq: loongson2: fix regression related to clock management ACPI / processor: move try_offline_node() after acpi_unmap_lsapic() ACPI: Drop physical_node_id_bitmap from struct acpi_device ACPI / PM: Walk physical_node_list under physical_node_lock ACPI / video: improve quirk check in acpi_video_bqc_quirk()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fix from Guenter Roeck: "Fix bug in adt7470 driver which causes it to fail writing fan speed limits" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adt7470) Fix incorrect return code check
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "Some driver fixes (em28xx, coda, usbtv, s5p, hdpvr and ml86v7667) and a fix for media DocBook" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] em28xx: fix assignment of the eeprom data [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe() [media] usbtv: fix dependency [media] usbtv: Throw corrupted frames away [media] usbtv: Fix deinterlacing [media] v4l2: added missing mutex.h include to v4l2-ctrls.h [media] DocBook: upgrade media_api DocBook version to 4.2 [media] ml86v7667: fix compile warning: 'ret' set but not used [media] s5p-g2d: Fix registration failure [media] media: coda: Fix DT driver data pointer for i.MX27 [media] s5p-mfc: Fix input/output format reporting
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fix from Jiri Kosina: "Revert of a patch which breaks enumeration workaround in hid-logitech-dj" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: Revert "HID: hid-logitech-dj: querying_devices was never set"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux由 Linus Torvalds 提交于
Pull fbdev fixes from Tomi Valkeinen: - omapdss: compilation fix and DVI fix for PandaBoard - mxsfb: fix colors when using 18bit LCD bus * tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: ARM: OMAP: dss-common: fix Panda's DVI DDC channel video: mxsfb: fix color settings for 18bit data bus and 32bpp OMAPDSS: analog-tv-connector: compile fix
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Mostly radeon, more fixes for dynamic power management which is is off by default for this release anyways, but there are a large number of testers, so I'd like to keep merging the fixes. Otherwise, radeon UVD fixes affecting suspend/resume regressions, i915 regression fixes, one for your mac mini, ast, mgag200, cirrus ttm fix and one regression fix in the core" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm: Don't pass negative delta to ktime_sub_ns() drm/radeon: make missing smc ucode non-fatal drm/radeon/dpm: require rlc for dpm drm/radeon/cik: use a mutex to properly lock srbm instanced registers drm/radeon: remove unnecessary unpin drm/radeon: add more UVD CS checking drm/radeon: stop sending invalid UVD destroy msg drm/radeon: only save UVD bo when we have open handles drm/radeon: always program the MC on startup drm/radeon: fix audio dto calculation on DCE3+ (v3) drm/radeon/dpm: disable sclk ss on rv6xx drm/radeon: fix halting UVD drm/radeon/dpm: adjust power state properly for UVD on SI drm/radeon/dpm: fix spread spectrum setup (v2) drm/radeon/dpm: adjust thermal protection requirements drm/radeon: select audio dto based on encoder id for DCE3 drm/radeon: properly handle pm on gpu reset drm/i915: do not disable backlight on vgaswitcheroo switch off drm/i915: Don't call encoder's get_config unless encoder is active drm/i915: avoid brightness overflow when doing scale ...
-
由 Oleg Nesterov 提交于
device_close()->recalc_sigpending() is not needed, sigprocmask() takes care of TIF_SIGPENDING correctly. And without ->siglock it is racy and wrong, it can wrongly clear TIF_SIGPENDING and miss a signal. But even with this patch device_close() is still buggy: 1. sigprocmask() should not be used, we have set_task_blocked(), but this is minor. 2. We should never block SIGKILL or SIGSTOP, and this is what the code tries to do. 3. This can't protect against SIGKILL or SIGSTOP anyway. Another thread can do signal_wake_up(), say, do_signal_stop() or complete_signal() or debugger. 4. sigprocmask(SIG_BLOCK, allsigs) doesn't necessarily clears TIF_SIGPENDING, say, freezing() or ->jobctl. 5. device_write() looks equally wrong by the same reason. Looks like, this tries to protect some wait_event_interruptible() logic from signals, it should be turned into uninterruptible wait. Or we need to implement something like signals_stop/start for such a use-case. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-