Uninline fscache_object_init() so as not to expose some of the FS-Cache
internals to the cache backend.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-By: NMilosz Tanski <milosz@adfin.com>
Acked-by: NJeff Layton <jlayton@redhat.com>

Don't sleep in __fscache_maybe_release_page() if __GFP_FS is not set.  This
goes some way towards mitigating fscache deadlocking against ext4 by way of
the allocator, eg:

INFO: task flush-8:0:24427 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-8:0       D ffff88003e2b9fd8     0 24427      2 0x00000000
 ffff88003e2b9138 0000000000000046 ffff880012e3a040 ffff88003e2b9fd8
 0000000000011c80 ffff88003e2b9fd8 ffffffff81a10400 ffff880012e3a040
 0000000000000002 ffff880012e3a040 ffff88003e2b9098 ffffffff8106dcf5
Call Trace:
 [<ffffffff8106dcf5>] ? __lock_is_held+0x31/0x53
 [<ffffffff81219b61>] ? radix_tree_lookup_element+0xf4/0x12a
 [<ffffffff81454bed>] schedule+0x60/0x62
 [<ffffffffa01d349c>] __fscache_wait_on_page_write+0x8b/0xa5 [fscache]
 [<ffffffff810498a8>] ? __init_waitqueue_head+0x4d/0x4d
 [<ffffffffa01d393a>] __fscache_maybe_release_page+0x30c/0x324 [fscache]
 [<ffffffffa01d369a>] ? __fscache_maybe_release_page+0x6c/0x324 [fscache]
 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170
 [<ffffffffa01fd7b2>] nfs_fscache_release_page+0x68/0x94 [nfs]
 [<ffffffffa01ef73e>] nfs_release_page+0x7e/0x86 [nfs]
 [<ffffffff810aa553>] try_to_release_page+0x32/0x3b
 [<ffffffff810b6c70>] shrink_page_list+0x535/0x71a
 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170
 [<ffffffff810b7352>] shrink_inactive_list+0x20a/0x2dd
 [<ffffffff81071a13>] ? mark_held_locks+0xbe/0xea
 [<ffffffff810b7a65>] shrink_lruvec+0x34c/0x3eb
 [<ffffffff810b7bd3>] do_try_to_free_pages+0xcf/0x355
 [<ffffffff810b7fc8>] try_to_free_pages+0x9a/0xa1
 [<ffffffff810b08d2>] __alloc_pages_nodemask+0x494/0x6f7
 [<ffffffff810d9a07>] kmem_getpages+0x58/0x155
 [<ffffffff810dc002>] fallback_alloc+0x120/0x1f3
 [<ffffffff8106db23>] ? trace_hardirqs_off+0xd/0xf
 [<ffffffff810dbed3>] ____cache_alloc_node+0x177/0x186
 [<ffffffff81162a6c>] ? ext4_init_io_end+0x1c/0x37
 [<ffffffff810dc403>] kmem_cache_alloc+0xf1/0x176
 [<ffffffff810b17ac>] ? test_set_page_writeback+0x101/0x113
 [<ffffffff81162a6c>] ext4_init_io_end+0x1c/0x37
 [<ffffffff81162ce4>] ext4_bio_write_page+0x20f/0x3af
 [<ffffffff8115cc02>] mpage_da_submit_io+0x26e/0x2f6
 [<ffffffff811088e5>] ? __find_get_block_slow+0x38/0x133
 [<ffffffff81161348>] mpage_da_map_and_submit+0x3a7/0x3bd
 [<ffffffff81161a60>] ext4_da_writepages+0x30d/0x426
 [<ffffffff810b3359>] do_writepages+0x1c/0x2a
 [<ffffffff81102f4d>] __writeback_single_inode+0x3e/0xe5
 [<ffffffff81103995>] writeback_sb_inodes+0x1bd/0x2f4
 [<ffffffff81103b3b>] __writeback_inodes_wb+0x6f/0xb4
 [<ffffffff81103c81>] wb_writeback+0x101/0x195
 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170
 [<ffffffff811043aa>] ? wb_do_writeback+0xaa/0x173
 [<ffffffff8110434a>] wb_do_writeback+0x4a/0x173
 [<ffffffff81071bbc>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff81038554>] ? del_timer+0x4b/0x5b
 [<ffffffff811044e0>] bdi_writeback_thread+0x6d/0x147
 [<ffffffff81104473>] ? wb_do_writeback+0x173/0x173
 [<ffffffff81048fbc>] kthread+0xd0/0xd8
 [<ffffffff81455eb2>] ? _raw_spin_unlock_irq+0x29/0x3e
 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55
 [<ffffffff81456aac>] ret_from_fork+0x7c/0xb0
 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55
2 locks held by flush-8:0/24427:
 #0:  (&type->s_umount_key#41){.+.+..}, at: [<ffffffff810e3b73>] grab_super_passive+0x4c/0x76
 #1:  (jbd2_handle){+.+...}, at: [<ffffffff81190d81>] start_this_handle+0x475/0x4ea


The problem here is that another thread, which is attempting to write the
to-be-stored NFS page to the on-ext4 cache file is waiting for the journal
lock, eg:

INFO: task kworker/u:2:24437 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/u:2     D ffff880039589768     0 24437      2 0x00000000
 ffff8800395896d8 0000000000000046 ffff8800283bf040 ffff880039589fd8
 0000000000011c80 ffff880039589fd8 ffff880039f0b040 ffff8800283bf040
 0000000000000006 ffff8800283bf6b8 ffff880039589658 ffffffff81071a13
Call Trace:
 [<ffffffff81071a13>] ? mark_held_locks+0xbe/0xea
 [<ffffffff81455e73>] ? _raw_spin_unlock_irqrestore+0x3a/0x50
 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170
 [<ffffffff81071bbc>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff81454bed>] schedule+0x60/0x62
 [<ffffffff81190c23>] start_this_handle+0x317/0x4ea
 [<ffffffff810498a8>] ? __init_waitqueue_head+0x4d/0x4d
 [<ffffffff81190fcc>] jbd2__journal_start+0xb3/0x12e
 [<ffffffff81176606>] __ext4_journal_start_sb+0xb2/0xc6
 [<ffffffff8115f137>] ext4_da_write_begin+0x109/0x233
 [<ffffffff810a964d>] generic_file_buffered_write+0x11a/0x264
 [<ffffffff811032cf>] ? __mark_inode_dirty+0x2d/0x1ee
 [<ffffffff810ab1ab>] __generic_file_aio_write+0x2a5/0x2d5
 [<ffffffff810ab24a>] generic_file_aio_write+0x6f/0xd0
 [<ffffffff81159a2c>] ext4_file_write+0x38c/0x3c4
 [<ffffffff810e0915>] do_sync_write+0x91/0xd1
 [<ffffffffa00a17f0>] cachefiles_write_page+0x26f/0x310 [cachefiles]
 [<ffffffffa01d470b>] fscache_write_op+0x21e/0x37a [fscache]
 [<ffffffff81455eb2>] ? _raw_spin_unlock_irq+0x29/0x3e
 [<ffffffffa01d2479>] fscache_op_work_func+0x78/0xd7 [fscache]
 [<ffffffff8104455a>] process_one_work+0x232/0x3a8
 [<ffffffff810444ff>] ? process_one_work+0x1d7/0x3a8
 [<ffffffff81044ee0>] worker_thread+0x214/0x303
 [<ffffffff81044ccc>] ? manage_workers+0x245/0x245
 [<ffffffff81048fbc>] kthread+0xd0/0xd8
 [<ffffffff81455eb2>] ? _raw_spin_unlock_irq+0x29/0x3e
 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55
 [<ffffffff81456aac>] ret_from_fork+0x7c/0xb0
 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55
4 locks held by kworker/u:2/24437:
 #0:  (fscache_operation){.+.+.+}, at: [<ffffffff810444ff>] process_one_work+0x1d7/0x3a8
 #1:  ((&op->work)){+.+.+.}, at: [<ffffffff810444ff>] process_one_work+0x1d7/0x3a8
 #2:  (sb_writers#14){.+.+.+}, at: [<ffffffff810ab22c>] generic_file_aio_write+0x51/0xd0
 #3:  (&sb->s_type->i_mutex_key#19){+.+.+.}, at: [<ffffffff810ab236>] generic_file_aio_write+0x5b/0x

fscache already tries to cancel pending stores, but it can't cancel a write
for which I/O is already in progress.

An alternative would be to accept writing garbage to the cache under extreme
circumstances and to kill the afflicted cache object if we have to do this.
However, we really need to know how strapped the allocator is before deciding
to do that.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-By: NMilosz Tanski <milosz@adfin.com>
Acked-by: NJeff Layton <jlayton@redhat.com>

Just some cleanup.

(And note the caller of this function may, for example, call vfs_unlink
on a child, so the "1" (I_MUTEX_PARENT) really was what was intended
here.)
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-By: NMilosz Tanski <milosz@adfin.com>
Acked-by: NJeff Layton <jlayton@redhat.com>

The spinlock() within the condition in while() will cause a compile error
if it is not a function. This is not a problem on mainline but it does not
look pretty and there is no reason to do it that way.
That patch writes it a little differently and avoids the double condition.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-By: NMilosz Tanski <milosz@adfin.com>
Acked-by: NJeff Layton <jlayton@redhat.com>

Add wait_on_atomic_t() and wake_up_atomic_t() to indicate became-zero events on
atomic_t types.  This uses the bit-wake waitqueue table.  The key is set to a
value outside of the number of bits in a long so that wait_on_bit() won't be
woken up accidentally.

What I'm using this for is: in a following patch I add a counter to struct
fscache_cookie to count the number of outstanding operations that need access
to netfs data.  The way this works is:

 (1) When a cookie is allocated, the counter is initialised to 1.

 (2) When an operation wants to access netfs data, it calls atomic_inc_unless()
     to increment the counter before it does so.  If it was 0, then the counter
     isn't incremented, the operation isn't permitted to access the netfs data
     (which might by this point no longer exist) and the operation aborts in
     some appropriate manner.

 (3) When an operation finishes with the netfs data, it decrements the counter
     and if it reaches 0, calls wake_up_atomic_t() on it - the assumption being
     that it was the last blocker.

 (4) When a cookie is released, the counter is decremented and the releaser
     uses wait_on_atomic_t() to wait for the counter to become 0 - which should
     indicate no one is using the netfs data any longer.  The netfs data can
     then be destroyed.

There are some alternatives that I have thought of and that have been suggested
by Tejun Heo:

 (A) Using wait_on_bit() to wait on a bit in the counter.  This doesn't work
     because if that bit happens to be 0 then the wait won't happen - even if
     the counter is non-zero.

 (B) Using wait_on_bit() to wait on a flag elsewhere which is cleared when the
     counter reaches 0.  Such a flag would be redundant and would add
     complexity.

 (C) Adding a waitqueue to fscache_cookie - this would expand that struct by
     several words for an event that happens just once in each cookie's
     lifetime.  Further, cookies are generally per-file so there are likely to
     be a lot of them.

 (D) Similar to (C), but add a pointer to a waitqueue in the cookie instead of
     a waitqueue.  This would add single word per cookie and so would be less
     of an expansion - but still an expansion.

 (E) Adding a static waitqueue to the fscache module.  Generally this would be
     fine, but under certain circumstances many cookies will all get added at
     the same time (eg. NFS umount, cache withdrawal) thereby presenting
     scaling issues.  Note that the wait may be significant as disk I/O may be
     in progress.

So, I think reusing the wait_on_bit() waitqueue set is reasonable.  I don't
make much use of the waitqueue I need on a per-cookie basis, but sometimes I
have a huge flood of the cookies to deal with.

I also don't want to add a whole new set of global waitqueue tables
specifically for the dec-to-0 event if I can reuse the bit tables.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-By: NMilosz Tanski <milosz@adfin.com>
Acked-by: NJeff Layton <jlayton@redhat.com>

Pull ext4 update from Ted Ts'o:
 "Fixed regressions (two stability regressions and a performance
  regression) introduced during the 3.10-rc1 merge window.

  Also included is a bug fix relating to allocating blocks after
  resizing an ext3 file system when using the ext4 file system driver"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
  ext4: revert "ext4: use io_end for multiple bios"
  ext4: limit group search loop for non-extent files
  ext4: fix fio regression

Pull workqueue fix from Tejun Heo:
 "A fix for a workqueue_congested() regression that broke fscache"

* 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: workqueue_congested() shouldn't translate WORK_CPU_UNBOUND into node number

Pull powerpc fixes from Benjamin Herrenschmidt:
 "This is mostly bug fixes (some of them regressions, some of them I
  deemed worth merging now) along with some patches from Li Zhong
  hooking up the new context tracking stuff (for the new full NO_HZ)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
  powerpc: Set show_unhandled_signals to 1 by default
  powerpc/perf: Fix setting of "to" addresses for BHRB
  powerpc/pmu: Fix order of interpreting BHRB target entries
  powerpc/perf: Move BHRB code into CONFIG_PPC64 region
  powerpc: select HAVE_CONTEXT_TRACKING for pSeries
  powerpc: Use the new schedule_user API on userspace preemption
  powerpc: Exit user context on notify resume
  powerpc: Exception hooks for context tracking subsystem
  powerpc: Syscall hooks for context tracking subsystem
  powerpc/booke64: Fix kernel hangs at kernel_dbg_exc
  powerpc: Fix irq_set_affinity() return values
  powerpc: Provide __bswapdi2
  powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3
  powerpc/powernv: Detect OPAL v3 API version
  powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again
  powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS
  powerpc: Bring all threads online prior to migration/hibernation
  powerpc/rtas_flash: Fix validate_flash buffer overflow issue
  powerpc/kexec: Fix kexec when using VMX optimised memcpy
  powerpc: Fix build errors STRICT_MM_TYPECHECKS
  ...

Just like other architectures
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently we only set the "to" address in the branch stack when the CPU
explicitly gives us a value.  Unfortunately it only does this for XL form
branches (eg blr, bctr, bctar) and not I and B form branches (eg b, bc).

Fortunately if we read the instruction from memory we can extract the offset of
a branch and calculate the target address.

This adds a function power_pmu_bhrb_to() to calculate the target/to address of
the corresponding I and B form branches.  It handles branches in both user and
kernel spaces.  It also plumbs this into the perf brhb reading code.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The current Branch History Rolling Buffer (BHRB) code misinterprets the order
of entries in the hardware buffer.  It assumes that a branch target address
will be read _after_ its corresponding branch.  In reality the branch target
comes before (lower mfbhrb entry) it's corresponding branch.

This is a rewrite of the code to take this into account.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The new Branch History Rolling buffer (BHRB) code is only useful on 64bit
processors, so move it into the #ifdef CONFIG_PPC64 region.

This avoids code bloat on 32bit systems.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Start context tracking support from pSeries.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch corresponds to
[PATCH] x86: Use the new schedule_user API on userspace preemption
  commit 0430499cSigned-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch allows RCU usage in do_notify_resume, e.g. signal handling.
It corresponds to
[PATCH] x86: Exit RCU extended QS on notify resume
  commit edf55fdaSigned-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This is the exception hooks for context tracking subsystem, including
data access, program check, single step, instruction breakpoint, machine check,
alignment, fp unavailable, altivec assist, unknown exception, whose handlers
might use RCU.

This patch corresponds to
[PATCH] x86: Exception hooks for userspace RCU extended QS
  commit 6ba3c97a

But after the exception handling moved to generic code, and some changes in
following two commits:
56dd9470
  context_tracking: Move exception handling to generic code
6c1e0256
  context_tracking: Restore correct previous context state on exception exit

it is able for exception hooks to use the generic code above instead of a
redundant arch implementation.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This is the syscall slow path hooks for context tracking subsystem,
corresponding to
[PATCH] x86: Syscall hooks for userspace RCU extended QS
  commit bf5a3c13

TIF_MEMDIE is moved to the second 16-bits (with value 17), as it seems there
is no asm code using it. TIF_NOHZ is added to _TIF_SYCALL_T_OR_A, so it is
better for it to be in the same 16 bits with others in the group, so in the
asm code, andi. with this group could work.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

MSR_DE is not cleared on entry to the kernel, and we don't clear it
explicitly outside of debug code.  If we have MSR_DE set in
prime_debug_regs(), and the new thread has events enabled in DBCR0
(e.g.  ICMP is set in thread->dbsr0, even though it was cleared in the
real DBCR0 when the thread got scheduled out), we'll end up taking a
debug exception in the kernel when DBCR0 is loaded.  DSRR0 will not
point to an exception vector, and the kernel ends up hanging at
kernel_dbg_exc.  Fix this by always clearing MSR_DE when we load new
debug state.

Another observed source of kernel_dbg_exc hangs is with the branch
taken event.  If this event is active, but we take a non-debug trap
(e.g. a TLB miss or an asynchronous interrupt) before the next branch.
We end up taking a branch-taken debug exception on the initial branch
instruction of the exception vector, but because the debug exception is
DBSR_BT rather than DBSR_IC we branch to kernel_dbg_exc before even
checking the DSRR0 address.  Fix this by checking for DBSR_BT as well
as DBSR_IC, which is what 32-bit does and what the comments suggest was
intended in the 64-bit code as well.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some versions of GCC apparently expect this to be provided by libgcc.

Updates from Mikey to fix 32 bit version and adding "r" to registers.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The current code fails to handle kexec on OPALv2. This fixes it
and adds code to improve the situation on OPALv3 where we can
query the CPU status from the firmware and decide what to do
based on that.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Future firmwares will support that new version
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Saw this warning again, and this time from the ret_from_fork path.

It seems we could clear the back chain earlier in copy_thread(), which
could cover both path, and also fix potential lockdep usage in
schedule_tail(), or exception occurred before we clear the back chain.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We are getting build errors with CONFIG_PROC_FS=n:

arch/powerpc/kernel/rtas_flash.c
   In function 'rtas_flash_init':
  745:33: error: unused variable 'f' [-Werror=unused-variable]

But rtas_flash.c should not be built when CONFIG_PROC_FS=n, beacause all
it does is provide a /proc interface to the RTAS flash routines.

CONFIG_RTAS_FLASH already depends on CONFIG_RTAS_PROC, to indicate that
it depends on the RTAS proc support, but CONFIG_RTAS_PROC does not
depend on CONFIG_PROC_FS. So fix that.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch brings online all threads which are present but not online
prior to migration/hibernation.  After migration/hibernation those
threads are taken back offline.

During migration/hibernation all online CPUs must call H_JOIN, this is
required by the hypervisor.  Without this patch, threads that are offline
(H_CEDE'd) will not be woken to make the H_JOIN call and the OS will be
deadlocked (all threads either JOIN'd or CEDE'd).

Cc: <stable@kernel.org>
Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

ibm,validate-flash-image RTAS call output buffer contains 150 - 200
bytes of data on latest system. Presently we have output
buffer size as 64 bytes and we use sprintf to copy data from
RTAS buffer to local buffer. This causes kernel oops (see below
call trace).

This patch increases local buffer size to 256 and also uses
snprintf instead of sprintf to copy data from RTAS buffer.

Kernel call trace :
-------------------
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=1024 NUMA pSeries
Modules linked in: nfs fscache lockd auth_rpcgss nfs_acl sunrpc fuse loop dm_mod ipv6 ipv6_lib usb_storage ehea(X) sr_mod qlge ses cdrom enclosure st be2net sg ext3 jbd mbcache usbhid hid ohci_hcd ehci_hcd usbcore qla2xxx usb_common sd_mod crc_t10dif scsi_dh_hp_sw scsi_dh_rdac scsi_dh_alua scsi_dh_emc scsi_dh lpfc scsi_transport_fc scsi_tgt ipr(X) libata scsi_mod
Supported: Yes
NIP: 4520323031333130 LR: 4520323031333130 CTR: 0000000000000000
REGS: c0000001b91779b0 TRAP: 0400   Tainted: G            X  (3.0.13-0.27-ppc64)
MSR: 8000000040009032 <EE,ME,IR,DR>  CR: 44022488  XER: 20000018
TASK = c0000001bca1aba0[4736] 'cat' THREAD: c0000001b9174000 CPU: 36
GPR00: 4520323031333130 c0000001b9177c30 c000000000f87c98 000000000000009b
GPR04: c0000001b9177c4a 000000000000000b 3520323031333130 2032303133313031
GPR08: 3133313031350a4d 000000000000009b 0000000000000000 c0000000003664a4
GPR12: 0000000022022448 c000000003ee6c00 0000000000000002 00000000100e8a90
GPR16: 00000000100cb9d8 0000000010093370 000000001001d310 0000000000000000
GPR20: 0000000000008000 00000000100fae60 000000000000005e 0000000000000000
GPR24: 0000000010129350 46573738302e3030 2046573738302e30 300a4d4720323031
GPR28: 333130313520554e 4b4e4f574e0a4d47 2032303133313031 3520323031333130
NIP [4520323031333130] 0x4520323031333130
LR [4520323031333130] 0x4520323031333130
Call Trace:
[c0000001b9177c30] [4520323031333130] 0x4520323031333130 (unreliable)
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

commit b3f271e8 (powerpc: POWER7 optimised memcpy using VMX and
enhanced prefetch) uses VMX when it is safe to do so (ie not in
interrupt). It also looks at the task struct to decide if we have to
save the current tasks' VMX state.

kexec calls memcpy() at a point where the task struct may have been
overwritten by the new kexec segments. If it has been overwritten
then when memcpy -> enable_altivec looks up current->thread.regs->msr
we get a cryptic oops or lockup.

I also notice we aren't initialising thread_info->cpu, which means
smp_processor_id is broken. Fix that too.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: <stable@vger.kernel.org> # 3.6+
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Our pgtable are 2*sizeof(pte_t)*PTRS_PER_PTE which is PTE_FRAG_SIZE.
Instead of depending on frag size, mask with PMD_MASKED_BITS.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Pull Xen/arm fixes from Stefano Stabellini:
 "This contains a couple of Xen on ARM initialization fixes and a patch
  to improve error handling"

* tag 'fixes-for-3.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen:
  xen/arm: rename xen_secondary_init and run it on every online cpu
  xen/arm: do not handle VCPUOP_register_vcpu_info failures
  xen/arm: initialize pm functions later

Pull parisc update from Helge Deller:
 "The second round of parisc updates for 3.10 includes build fixes and
  enhancements to utilize irq stacks, fixes SMP races when updating PTE
  and TLB entries by proper locking and makes the search for the correct
  cross compiler more robust on Debian and Gentoo."

* 'parisc-for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: make default cross compiler search more robust (v3)
  parisc: fix SMP races when updating PTE and TLB entries in entry.S
  parisc: implement irq stacks - part 2 (v2)

Pull networking fixes from David Miller:
 "Several small bug fixes all over:

   1) be2net driver uses wrong payload length when submitting MAC list
      get requests to the chip.  From Sathya Perla.

   2) Fix mwifiex memory leak on driver unload, from Amitkumar Karwar.

   3) Prevent random memory access in batman-adv, from Marek Lindner.

   4) batman-adv doesn't check for pskb_trim_rcsum() errors, also from
      Marek Lindner.

   5) Fix fec crashes on rapid link up/down, from Frank Li.

   6) Fix inner protocol grovelling in GSO, from Pravin B Shelar.

   7) Link event validation fix in qlcnic from Rajesh Borundia.

   8) Not all FEC chips can support checksum offload, fix from Shawn
      Guo.

   9) EXPORT_SYMBOL + inline doesn't make any sense, from Denis Efremov.

  10) Fix race in passthru mode during device removal in macvlan, from
      Jiri Pirko.

  11) Fix RCU hash table lookup socket state race in ipv6, leading to
      NULL pointer derefs, from Eric Dumazet.

  12) Add several missing HAS_DMA kconfig dependencies, from Geert
      Uyttterhoeven.

  13) Fix bogus PCI resource management in 3c59x driver, from Sergei
      Shtylyov.

  14) Fix info leak in ipv6 GRE tunnel driver, from Amerigo Wang.

  15) Fix device leak in ipv6 IPSEC policy layer, from Cong Wang.

  16) DMA mapping leak fix in qlge from Thadeu Lima de Souza Cascardo.

  17) Missing iounmap on probe failure in bna driver, from Wei Yongjun."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
  bna: add missing iounmap() on error in bnad_init()
  qlge: fix dma map leak when the last chunk is not allocated
  xfrm6: release dev before returning error
  ipv6,gre: do not leak info to user-space
  virtio_net: use default napi weight by default
  emac: Fix EMAC soft reset on 460EX/GT
  3c59x: fix PCI resource management
  caif: CAIF_VIRTIO should depend on HAS_DMA
  net/ethernet: MACB should depend on HAS_DMA
  net/ethernet: ARM_AT91_ETHER should depend on HAS_DMA
  net/wireless: ATH9K should depend on HAS_DMA
  net/ethernet: STMMAC_ETH should depend on HAS_DMA
  net/ethernet: NET_CALXEDA_XGMAC should depend on HAS_DMA
  ipv6: do not clear pinet6 field
  macvlan: fix passthru mode race between dev removal and rx path
  ipv4: ip_output: remove inline marking of EXPORT_SYMBOL functions
  net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode
  net/mlx4_core: Add missing report on VST and spoof-checking dev caps
  net: fec: enable hardware checksum only on imx6q-fec
  qlcnic: Fix validation of link event command.
  ...

People/distros vary how they prefix the toolchain name for 64bit builds.
Rather than enforce one convention over another, add a for loop which
does a search for all the general prefixes.

For 64bit builds, we now search for (in order):
	hppa64-unknown-linux-gnu
	hppa64-linux-gnu
	hppa64-linux

For 32bit builds, we look for:
	hppa-unknown-linux-gnu
	hppa-linux-gnu
	hppa-linux
	hppa2.0-unknown-linux-gnu
	hppa2.0-linux-gnu
	hppa2.0-linux
	hppa1.1-unknown-linux-gnu
	hppa1.1-linux-gnu
	hppa1.1-linux

This patch was initiated by Mike Frysinger, with feedback from Jeroen
Roovers, John David Anglin and Helge Deller.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NJeroen Roovers <jer@gentoo.org>
Signed-off-by: NJohn David Anglin <dave.anglin@bell.net>
Signed-off-by: NHelge Deller <deller@gmx.de>

Add the missing iounmap() before return from bnad_init()
in the error handling case.
Introduced by commit 01b54b14
(bna: tx rx cleanup fix).
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qlge allocates chunks from a page that it maps and unmaps that page when
the last chunk is released. When the driver is unloaded or the card is
removed, all chunks are released and the page is unmapped for the last
chunk.

However, when the last chunk of a page is not allocated and the device
is removed, that page is not unmapped. In fact, its last reference is
not put and there's also a page leak. This bug prevents a device from
being properly hotplugged.

When the DMA API debug option is enabled, the following messages show
the pending DMA allocation after we remove the driver.

This patch fixes the bug by unmapping and putting the page from the ring
if its last chunk has not been allocated.

pci 0005:98:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=1]
One of leaked entries details: [device address=0x0000000060a80000] [size=65536 bytes] [mapped with DMA_FROM_DEVICE] [mapped as page]
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:746
Modules linked in: qlge(-) rpadlpar_io rpaphp pci_hotplug fuse [last unloaded: qlge]
NIP: c0000000003fc3ec LR: c0000000003fc3e8 CTR: c00000000054de60
REGS: c0000003ee9c74e0 TRAP: 0700   Tainted: G           O  (3.7.2)
MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 28002424  XER: 00000001
SOFTE: 1
CFAR: c0000000007a39c8
TASK = c0000003ee8d5c90[8406] 'rmmod' THREAD: c0000003ee9c4000 CPU: 31
GPR00: c0000000003fc3e8 c0000003ee9c7760 c000000000c789f8 00000000000000ee
GPR04: 0000000000000000 00000000000000ef 0000000000004000 0000000000010000
GPR08: 00000000000000be c000000000b22088 c000000000c4c218 00000000007c0000
GPR12: 0000000028002422 c00000000ff26c80 0000000000000000 000001001b0f1b40
GPR16: 00000000100cb9d8 0000000010093088 c000000000cdf910 0000000000000001
GPR20: 0000000000000000 c000000000dbfc00 0000000000000000 c000000000dbfb80
GPR24: c0000003fafc9d80 0000000000000001 000000000001ff80 c0000003f38f7888
GPR28: c000000000ddfc00 0000000000000400 c000000000bd7790 c000000000ddfb80
NIP [c0000000003fc3ec] .dma_debug_device_change+0x22c/0x2b0
LR [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0
Call Trace:
[c0000003ee9c7760] [c0000000003fc3e8] .dma_debug_device_change+0x228/0x2b0 (unreliable)
[c0000003ee9c7840] [c00000000079a098] .notifier_call_chain+0x78/0xf0
[c0000003ee9c78e0] [c0000000000acc20] .__blocking_notifier_call_chain+0x70/0xb0
[c0000003ee9c7990] [c0000000004a9580] .__device_release_driver+0x100/0x140
[c0000003ee9c7a20] [c0000000004a9708] .driver_detach+0x148/0x150
[c0000003ee9c7ac0] [c0000000004a8144] .bus_remove_driver+0xc4/0x150
[c0000003ee9c7b60] [c0000000004aa58c] .driver_unregister+0x8c/0xe0
[c0000003ee9c7bf0] [c0000000004090b4] .pci_unregister_driver+0x34/0xf0
[c0000003ee9c7ca0] [d000000002231194] .qlge_exit+0x1c/0x34 [qlge]
[c0000003ee9c7d20] [c0000000000e36d8] .SyS_delete_module+0x1e8/0x290
[c0000003ee9c7e30] [c0000000000098d4] syscall_exit+0x0/0x94
Instruction dump:
7f26cb78 e818003a e87e81a0 e8f80028 e9180030 796b1f24 78001f24 7d6a5a14
7d2a002a e94b0020 483a7595 60000000 <0fe00000> 2fb80000 40de0048 80120050
---[ end trace 4294f9abdb01031d ]---
Mapped at:
 [<d000000002222f54>] .ql_update_lbq+0x384/0x580 [qlge]
 [<d000000002227bd0>] .ql_clean_inbound_rx_ring+0x300/0xc60 [qlge]
 [<d0000000022288cc>] .ql_napi_poll_msix+0x39c/0x5a0 [qlge]
 [<c0000000006b3c50>] .net_rx_action+0x170/0x300
 [<c000000000081840>] .__do_softirq+0x170/0x300
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: NJitendra Kalsaria <Jitendra.kalsaria@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename xen_secondary_init to xen_percpu_init.
Run xen_percpu_init on the each online cpu, reuse the current on_each_cpu call.
Merge xen_percpu_enable_events into xen_percpu_init.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

We expect VCPUOP_register_vcpu_info to succeed, do not try to handle
failures.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>

If we are running in dom0, we have to wait for the arch specific code to
complete the initialization in order for us to successfully reset the
power_off and pm_restart functions.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Pull spi updates from Mark Brown:
 "A few driver specific fixes plus improved error handling in the
  generic DT GPIO chipselect handling - not exciting but useful."

* tag 'spi-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi/spi-atmel: BUG: fix doesn' support 16 bits transfers using PIO
  spi/davinci: fix module build error
  spi: Return error from of_spi_register_master on bad "cs-gpios" property
  spi: Initialize cs_gpio and cs_gpios with -ENOENT
  spi/atmel: fix speed_hz check in atmel_spi_transfer()

Pull drm fixes from Dave Airlie:
 "Just a few straggling fixes I hoovered up, and an intel fixes pull
  from Daniel which fixes some regressions, and some mgag200 fixes from
  Matrox."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
  drm/mgag200: Fix framebuffer base address programming
  drm/mgag200: Convert counter delays to jiffies
  drm/mgag200: Fix writes into MGA1064_PIX_CLK_CTL register
  drm/mgag200: Don't change unrelated registers during modeset
  drm: Only print a debug message when the polled connector has changed
  drm: Make the HPD status updates debug logs more readable
  drm: Use names of ioctls in debug traces
  drm: Remove pointless '-' characters from drm_fb_helper documentation
  drm: Add kernel-doc for drm_fb_helper_funcs->initial_config
  drm: refactor call to request_module
  drm: Don't prune modes loudly when a connector is disconnected
  drm: Add missing break in the command line mode parsing code
  drm/i915: clear the stolen fb before resuming
  Revert "drm/i915: Calculate correct stolen size for GEN7+"
  drm/i915: hsw: fix link training for eDP on port-A
  Revert "drm/i915: revert eDP bpp clamping code changes"
  drm: don't check modeset locks in panic handler
  drm/i915: Fix pipe enabled mask for pipe C in WM calculations
  drm/mm: fix dump table BUG
  drm/i915: Always normalize return timeout for wait_timeout_ioctl