This fixes the CU count reported to userspace for
OpenCL.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=82581Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Cc: stable@vger.kernel.org

Fixes lockups due to CP read GPUVM faults when running piglit on Cape
Verde.

v2 (chk): apply the fix to R600+ as well, on CIK only the GFX CP has
	  a PFP, add more comments to R600 code, enable flushing again
v3: (agd5f): only apply to 7xx+.  r6xx does not have the packet.
v4: (agd5f): split flush change into a separate patch, fix formatting
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>

It isn't necessary for command streams generated by the kernel (at least
not while we aren't storing ring or indirect buffers in VRAM).
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

May fix hangs in some cases.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Skip the "manual" pageflip completion checks via polling and
guessing in the vblank handler radeon_crtc_handle_vblank() on
asics which are known to reliably support hw pageflip completion
irqs. Those pflip irqs are a more reliable and race-free method
of handling pageflip completion detection, whereas the "classic"
polling method has some small races in combination with dpm on,
and with the reworked pageflip implementation since Linux 3.16.

On old asics without pflip irqs, the classic method is used.

On asics with known good pflip irqs, only pflip irqs are used
by default, but a new module parameter "use_pflipirqs" allows to
override this in case we encounter asics in the wild with
unreliable or faulty pflip irqs. A module parameter of 0 allows
to use the classic method only in such a case. A parameter of 1
allows to use both classic method and pflip irqs as additional
band-aid to avoid some small races which could happen with the
classic method alone. The setting 1 gives Linux 3.16 behaviour.

Hw pflip irqs are available since R600.

Tested on DCE-4, AMD Cedar - FirePro 2270.

v2:  agd5f: only enable pflip interrupts on DCE4+ as they are not
reliable on older asics.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Older firmware didn't support the new nop packet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAndreas Boll <andreas.boll.dev@gmail.com>

Older firmware didn't support the new nop packet.

v2 (Andreas Boll):
 - Drop usage of packet3 for new firmware
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: NAndreas Boll <andreas.boll.dev@gmail.com>
Cc: stable@vger.kernel.org

This ensures the GPU sees all previous CPU writes to VRAM, which makes it
safe:

* For userspace to stream data from CPU to GPU via VRAM instead of GTT
* For IBs to be stored in VRAM instead of GTT
* For ring buffers to be stored in VRAM instead of GTT, if the HPD flush
  is performed via MMIO
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Seems to make VM flushes more stable on SI and CIK.

v2: only use the PFP on the GFX ring on CIK
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: fix rebase onto drm-fixes
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Doesn't seem necessary, the GART table memory should be persistent.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds CIK support for the new ucode format.

v2: add size validation, integrate debug info
v3: add support for MEC2 on KV
v4: fix typos
v4: update to latest format
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a halfway fix for hawaii acceleration. More fixes to come
but hopefully isolated to userspace.
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

We must mask out the overflow bit as well, otherwise
the wptr will never match the rptr again and the interrupt
handler will loop forever.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Query to find out how many compute units on a GPU.
Useful for OpenCL usermode drivers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Replace occurrences of "v & 0xffffffff" with lower_32_bits(v)
when it's next to an upper_32_bits(v). Also remove unnecessary
"upper_32_bits(v) & 0xffffffff" code snippets.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch makes it possible to decide how many address
bits are spend on the page directory vs the page tables.

v2: remove unintended change
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch implements support for VRAM page table entry compression.
PTE construction is enhanced to identify physically contiguous page
ranges and mark them in the PTE fragment field. L1/L2 TLB support is
enabled for 64KB (SI/CIK) and 256KB (NI) PTE fragments, significantly
improving TLB utilization for VRAM allocations.

Linear store bandwidth is improved from 60GB/s to 125GB/s on Pitcairn.
Unigine Heaven 3.0 sees an average improvement from 24.7 to 27.7 FPS
on default settings at 1920x1200 resolution with vsync disabled.

See main comment in radeon_vm.c for a technical description.

v2 (chk): rebased and simplified.
v3 (chk): add missing hw setup
v4 (chk): rebased on current drm-fixes-3.15
v5 (chk): fix comments and commit text
Signed-off-by: NJay Cornwall <jay@jcornwall.me>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Also add golden registers, update firmware loading functions.
Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

It would appear this bug has been copy/pasted many times without being noticed.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Testing the update pending bit directly after issuing an
update is nonsense cause depending on the pixel clock the
CRTC needs a bit of time to execute the flip even when we
are in the VBLANK period.

This is just a non invasive patch to solve the problem at
hand, a more complete and cleaner solution should follow
in the next merge window.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76564

v2: fix source IDs for CRTC2-6
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

Avoid a possible segfault.
Noticed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Fixes mclk stability on certain asics.

v2: print out mc firmware version used and size

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=75992Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

Need to swap on BE.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

This fixes fast color clear with 1D-tiled single-sample surfaces
and Hyper-Z corruption with 1D-tiled depth surfaces.

Even though it seems it is not needed for 1D tiling, CMASK and HTILE are
always 2D-tiled, thus the hw needs to know the actual pipe configuration
for CMASK and HTILE addressing no matter what the tiling mode of the surface
is.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

When we disable the rings, set the status properly.  If
not other code pathes may try and use the rings which are
not functional at this point.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Copy-paste typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Moving the pm resume up in the init order to fix
dpm seems to have regressed somes cases with the old
pm code.  Move it back to late resume.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The reason for the false positives was fixed quite some time ago and since
most engines can still execute NOPs while being locked up it leads to false
negatives.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

In all cases where it really matters we are using the read functions anyway.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Some of the vce clocks are automatic, others need to
be manually enabled.  For ease, just disable cg when
vce is active.

v2: rebased
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only VCE 2.0 support so far.

v2: squashing multiple patches into this one
v3: add IRQ support for CIK, major cleanups,
    basic code documentation
v4: remove HAINAN from chipset list
Signed-off-by: NChristian König <christian.koenig@amd.com>

If we are not able to properly initialize one of the gpu
engines for buffer paging, we limit vram to the size of
the cpu visible aperture.  We generally either use the gfx
or dma engine to do this.  Clean up the size limiting code
to only adjust the size based on what ring is selected
for buffer paging rather than making assumptions about which
engine is selected for paging.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Use the hw power up values rather than 0.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is the preferred flushing method on CIK.

Note, this only works on the PFP so the engine bit must be
set.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>