arch_vtime_task_switch() is a small function which is called
only from vtime_common_task_switch(), so it is worth inlining
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When compiled with GCC 8.1, vmlinux is significantly bigger than
with GCC 4.8.

When looking at the generated code with objdump, we notice that
all functions and loops when a 16 bytes alignment. This significantly
increases the size of the kernel. It is pointless and even
counterproductive as on the 8xx 'nop' also consumes one clock cycle.

Size of vmlinux with GCC 4.8:
   text	   data	    bss	    dec	    hex	filename
5801948	1626076	 457796	7885820	 7853fc	vmlinux

Size of vmlinux with GCC 8.1:
   text	   data	    bss	    dec	    hex	filename
6764592	1630652	 456476	8851720	 871108	vmlinux

Size of vmlinux with GCC 8.1 and this patch:
   text	   data	    bss	    dec	    hex	filename
6331544	1631756	 456476	8419776	 8079c0	vmlinux
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The generic csum_ipv6_magic() generates a pretty bad result

00000000 <csum_ipv6_magic>: (PPC32)
   0:	81 23 00 00 	lwz     r9,0(r3)
   4:	81 03 00 04 	lwz     r8,4(r3)
   8:	7c e7 4a 14 	add     r7,r7,r9
   c:	7d 29 38 10 	subfc   r9,r9,r7
  10:	7d 4a 51 10 	subfe   r10,r10,r10
  14:	7d 27 42 14 	add     r9,r7,r8
  18:	7d 2a 48 50 	subf    r9,r10,r9
  1c:	80 e3 00 08 	lwz     r7,8(r3)
  20:	7d 08 48 10 	subfc   r8,r8,r9
  24:	7d 4a 51 10 	subfe   r10,r10,r10
  28:	7d 29 3a 14 	add     r9,r9,r7
  2c:	81 03 00 0c 	lwz     r8,12(r3)
  30:	7d 2a 48 50 	subf    r9,r10,r9
  34:	7c e7 48 10 	subfc   r7,r7,r9
  38:	7d 4a 51 10 	subfe   r10,r10,r10
  3c:	7d 29 42 14 	add     r9,r9,r8
  40:	7d 2a 48 50 	subf    r9,r10,r9
  44:	80 e4 00 00 	lwz     r7,0(r4)
  48:	7d 08 48 10 	subfc   r8,r8,r9
  4c:	7d 4a 51 10 	subfe   r10,r10,r10
  50:	7d 29 3a 14 	add     r9,r9,r7
  54:	7d 2a 48 50 	subf    r9,r10,r9
  58:	81 04 00 04 	lwz     r8,4(r4)
  5c:	7c e7 48 10 	subfc   r7,r7,r9
  60:	7d 4a 51 10 	subfe   r10,r10,r10
  64:	7d 29 42 14 	add     r9,r9,r8
  68:	7d 2a 48 50 	subf    r9,r10,r9
  6c:	80 e4 00 08 	lwz     r7,8(r4)
  70:	7d 08 48 10 	subfc   r8,r8,r9
  74:	7d 4a 51 10 	subfe   r10,r10,r10
  78:	7d 29 3a 14 	add     r9,r9,r7
  7c:	7d 2a 48 50 	subf    r9,r10,r9
  80:	81 04 00 0c 	lwz     r8,12(r4)
  84:	7c e7 48 10 	subfc   r7,r7,r9
  88:	7d 4a 51 10 	subfe   r10,r10,r10
  8c:	7d 29 42 14 	add     r9,r9,r8
  90:	7d 2a 48 50 	subf    r9,r10,r9
  94:	7d 08 48 10 	subfc   r8,r8,r9
  98:	7d 4a 51 10 	subfe   r10,r10,r10
  9c:	7d 29 2a 14 	add     r9,r9,r5
  a0:	7d 2a 48 50 	subf    r9,r10,r9
  a4:	7c a5 48 10 	subfc   r5,r5,r9
  a8:	7c 63 19 10 	subfe   r3,r3,r3
  ac:	7d 29 32 14 	add     r9,r9,r6
  b0:	7d 23 48 50 	subf    r9,r3,r9
  b4:	7c c6 48 10 	subfc   r6,r6,r9
  b8:	7c 63 19 10 	subfe   r3,r3,r3
  bc:	7c 63 48 50 	subf    r3,r3,r9
  c0:	54 6a 80 3e 	rotlwi  r10,r3,16
  c4:	7c 63 52 14 	add     r3,r3,r10
  c8:	7c 63 18 f8 	not     r3,r3
  cc:	54 63 84 3e 	rlwinm  r3,r3,16,16,31
  d0:	4e 80 00 20 	blr

0000000000000000 <.csum_ipv6_magic>: (PPC64)
   0:	81 23 00 00 	lwz     r9,0(r3)
   4:	80 03 00 04 	lwz     r0,4(r3)
   8:	81 63 00 08 	lwz     r11,8(r3)
   c:	7c e7 4a 14 	add     r7,r7,r9
  10:	7f 89 38 40 	cmplw   cr7,r9,r7
  14:	7d 47 02 14 	add     r10,r7,r0
  18:	7d 30 10 26 	mfocrf  r9,1
  1c:	55 29 f7 fe 	rlwinm  r9,r9,30,31,31
  20:	7d 4a 4a 14 	add     r10,r10,r9
  24:	7f 80 50 40 	cmplw   cr7,r0,r10
  28:	7d 2a 5a 14 	add     r9,r10,r11
  2c:	80 03 00 0c 	lwz     r0,12(r3)
  30:	81 44 00 00 	lwz     r10,0(r4)
  34:	7d 10 10 26 	mfocrf  r8,1
  38:	55 08 f7 fe 	rlwinm  r8,r8,30,31,31
  3c:	7d 29 42 14 	add     r9,r9,r8
  40:	81 04 00 04 	lwz     r8,4(r4)
  44:	7f 8b 48 40 	cmplw   cr7,r11,r9
  48:	7d 29 02 14 	add     r9,r9,r0
  4c:	7d 70 10 26 	mfocrf  r11,1
  50:	55 6b f7 fe 	rlwinm  r11,r11,30,31,31
  54:	7d 29 5a 14 	add     r9,r9,r11
  58:	7f 80 48 40 	cmplw   cr7,r0,r9
  5c:	7d 29 52 14 	add     r9,r9,r10
  60:	7c 10 10 26 	mfocrf  r0,1
  64:	54 00 f7 fe 	rlwinm  r0,r0,30,31,31
  68:	7d 69 02 14 	add     r11,r9,r0
  6c:	7f 8a 58 40 	cmplw   cr7,r10,r11
  70:	7c 0b 42 14 	add     r0,r11,r8
  74:	81 44 00 08 	lwz     r10,8(r4)
  78:	7c f0 10 26 	mfocrf  r7,1
  7c:	54 e7 f7 fe 	rlwinm  r7,r7,30,31,31
  80:	7c 00 3a 14 	add     r0,r0,r7
  84:	7f 88 00 40 	cmplw   cr7,r8,r0
  88:	7d 20 52 14 	add     r9,r0,r10
  8c:	80 04 00 0c 	lwz     r0,12(r4)
  90:	7d 70 10 26 	mfocrf  r11,1
  94:	55 6b f7 fe 	rlwinm  r11,r11,30,31,31
  98:	7d 29 5a 14 	add     r9,r9,r11
  9c:	7f 8a 48 40 	cmplw   cr7,r10,r9
  a0:	7d 29 02 14 	add     r9,r9,r0
  a4:	7d 70 10 26 	mfocrf  r11,1
  a8:	55 6b f7 fe 	rlwinm  r11,r11,30,31,31
  ac:	7d 29 5a 14 	add     r9,r9,r11
  b0:	7f 80 48 40 	cmplw   cr7,r0,r9
  b4:	7d 29 2a 14 	add     r9,r9,r5
  b8:	7c 10 10 26 	mfocrf  r0,1
  bc:	54 00 f7 fe 	rlwinm  r0,r0,30,31,31
  c0:	7d 29 02 14 	add     r9,r9,r0
  c4:	7f 85 48 40 	cmplw   cr7,r5,r9
  c8:	7c 09 32 14 	add     r0,r9,r6
  cc:	7d 50 10 26 	mfocrf  r10,1
  d0:	55 4a f7 fe 	rlwinm  r10,r10,30,31,31
  d4:	7c 00 52 14 	add     r0,r0,r10
  d8:	7f 80 30 40 	cmplw   cr7,r0,r6
  dc:	7d 30 10 26 	mfocrf  r9,1
  e0:	55 29 ef fe 	rlwinm  r9,r9,29,31,31
  e4:	7c 09 02 14 	add     r0,r9,r0
  e8:	54 03 80 3e 	rotlwi  r3,r0,16
  ec:	7c 03 02 14 	add     r0,r3,r0
  f0:	7c 03 00 f8 	not     r3,r0
  f4:	78 63 84 22 	rldicl  r3,r3,48,48
  f8:	4e 80 00 20 	blr

This patch implements it in assembly for both PPC32 and PPC64

Link: https://github.com/linuxppc/linux/issues/9Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Improve __csum_partial by interleaving loads and adds.

On a 8xx, it brings neither improvement nor degradation.
On a 83xx, it brings a 25% improvement.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

commit 87a156fb ("Align hot loops of some string functions")
degraded the performance of string functions by adding useless
nops

A simple benchmark on an 8xx calling 100000x a memchr() that
matches the first byte runs in 41668 TB ticks before this patch
and in 35986 TB ticks after this patch. So this gives an
improvement of approx 10%

Another benchmark doing the same with a memchr() matching the 128th
byte runs in 1011365 TB ticks before this patch and 1005682 TB ticks
after this patch, so regardless on the number of loops, removing
those useless nops improves the test by 5683 TB ticks.

Fixes: 87a156fb ("Align hot loops of some string functions")
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Use fault_in_pages_readable() to prefault user context
instead of open coding
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The 885 familly processors don't have the Real Time Clock
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Variable div is set but never used. Remove it.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

reloc_offset() is the same as add_reloc_offset(0)
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The current implementation of from64to32() gives a poor result:

0000000000000270 <.from64to32>:
 270:	38 00 ff ff 	li      r0,-1
 274:	78 69 00 22 	rldicl  r9,r3,32,32
 278:	78 00 00 20 	clrldi  r0,r0,32
 27c:	7c 60 00 38 	and     r0,r3,r0
 280:	7c 09 02 14 	add     r0,r9,r0
 284:	78 09 00 22 	rldicl  r9,r0,32,32
 288:	7c 00 4a 14 	add     r0,r0,r9
 28c:	78 03 00 20 	clrldi  r3,r0,32
 290:	4e 80 00 20 	blr

This patch modifies from64to32() to operate in the same
spirit as csum_fold()

It swaps the two 32-bit halves of sum then it adds it with the
unswapped sum. If there is a carry from adding the two 32-bit halves,
it will carry from the lower half into the upper half, giving us the
correct sum in the upper half.

The resulting code is:

0000000000000260 <.from64to32>:
 260:	78 60 00 02 	rotldi  r0,r3,32
 264:	7c 60 1a 14 	add     r3,r0,r3
 268:	78 63 00 22 	rldicl  r3,r3,32,32
 26c:	4e 80 00 20 	blr
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

stale_map[] bits are only set in steal_context_smp() so
on UP processors this map is useless. Only manage it for SMP
processors.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

last_context is 16 on the 8xx, 65535 on the 47x and 255 on other ones.

The kernel is exclusively built for the 8xx, for the 47x or for
another processor so the last context can be defined as a constant
depending on the processor.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
[mpe: Reformat old comment]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

no_selective_tlbil hence the use of either steal_all_contexts()
or steal_context_up() depends on the subarch, it won't change
during run. Only the 8xx uses steal_all_contexts and CONFIG_PPC_8xx
is exclusive of other processors.

This patch replaces the test of no_selective_tlbil global var by
a test of CONFIG_PPC_8xx selection. It avoids the test and
removes unnecessary code.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

First context is now 1 for all supported platforms, so it
can be made a constant.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Direction is already checked in all calling functions in
include/linux/dma-mapping.h and also in called function __dma_sync()

So really no need to check it once more here.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

emulate_step() tests are failing if VSX is not supported or disabled.

  emulate_step_test: lxvd2x         : FAIL
  emulate_step_test: stxvd2x        : FAIL

If !CPU_FTR_VSX, emulate_step() failure is expected and testcase should
PASS with a valid justification. After patch:

  emulate_step_test: lxvd2x         : PASS (!CPU_FTR_VSX)
  emulate_step_test: stxvd2x        : PASS (!CPU_FTR_VSX)
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

emulate_step() is not checking runtime VSX feature flag before
emulating an instruction. This is causing kernel crash when kernel
is compiled with CONFIG_VSX=y but running on a machine where VSX
is not supported or disabled. Ex, while running emulate_step tests
on P6 machine:

  Oops: Exception in kernel mode, sig: 4 [#1]
  NIP [c000000000095c24] .load_vsrn+0x28/0x54
  LR [c000000000094bdc] .emulate_loadstore+0x167c/0x17b0
  Call Trace:
    0x40fe240c7ae147ae (unreliable)
    .emulate_loadstore+0x167c/0x17b0
    .emulate_step+0x25c/0x5bc
    .test_lxvd2x_stxvd2x+0x64/0x154
    .test_emulate_step+0x38/0x4c
    .do_one_initcall+0x5c/0x2c0
    .kernel_init_freeable+0x314/0x4cc
    .kernel_init+0x24/0x160
    .ret_from_kernel_thread+0x58/0xb4

With fix:
  emulate_step_test: lxvd2x         : FAIL
  emulate_step_test: stxvd2x        : FAIL
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Replace 'op->type & INSTR_TYPE_MASK' expression with GETTYPE(op->type)
macro.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This tests perf hardware breakpoints (ie PERF_TYPE_BREAKPOINT) on
powerpc.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We now have barrier_nospec as mitigation so print it in
cpu_show_spectre_v1() when enabled.
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Our syscall entry is done in assembly so patch in an explicit
barrier_nospec.

Based on a patch by Michal Suchanek.
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Based on the x86 commit doing the same.

See commit 304ec1b0 ("x86/uaccess: Use __uaccess_begin_nospec()
and uaccess_try_nospec") and b3bbfb3f ("x86: Introduce
__uaccess_begin_nospec() and uaccess_try_nospec") for more detail.

In all cases we are ordering the load from the potentially
user-controlled pointer vs a previous branch based on an access_ok()
check or similar.

Base on a patch from Michal Suchanek.
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Check what firmware told us and enable/disable the barrier_nospec as
appropriate.

We err on the side of enabling the barrier, as it's no-op on older
systems, see the comment for more detail.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Note that unlike RFI which is patched only in kernel the nospec state
reflects settings at the time the module was loaded.

Iterating all modules and re-patching every time the settings change
is not implemented.

Based on lwsync patching.
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Based on the RFI patching. This is required to be able to disable the
speculation barrier.

Only one barrier type is supported and it does nothing when the
firmware does not enable it. Also re-patching modules is not supported
So the only meaningful thing that can be done is patching out the
speculation barrier at boot when the user says it is not wanted.
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

A no-op form of ori (or immediate of 0 into r31 and the result stored
in r31) has been re-tasked as a speculation barrier. The instruction
only acts as a barrier on newer machines with appropriate firmware
support. On older CPUs it remains a harmless no-op.

Implement barrier_nospec using this instruction.

mpe: The semantics of the instruction are believed to be that it
prevents execution of subsequent instructions until preceding branches
have been fully resolved and are no longer executing speculatively.
There is no further documentation available at this time.
Signed-off-by: NMichal Suchanek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This now has new code in it written by Nick and I, and switch to a
SPDX tag.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>

This allows eg. the RCU stall detector, or the soft/hardlockup
detectors to trigger a backtrace on all CPUs.

We implement this by sending a "safe" NMI, which will actually only
send an IPI. Unfortunately the generic code prints "NMI", so that's a
little confusing but we can probably live with it.

If one of the CPUs doesn't respond to the IPI, we then print some info
from it's paca and do a backtrace based on its saved_r1.

Example output:

  INFO: rcu_sched detected stalls on CPUs/tasks:
  	2-...0: (0 ticks this GP) idle=1be/1/4611686018427387904 softirq=1055/1055 fqs=25735
  	(detected by 4, t=58847 jiffies, g=58, c=57, q=1258)
  Sending NMI from CPU 4 to CPUs 2:
  CPU 2 didn't respond to backtrace IPI, inspecting paca.
  irq_soft_mask: 0x01 in_mce: 0 in_nmi: 0 current: 3623 (bash)
  Back trace of paca->saved_r1 (0xc0000000e1c83ba0) (possibly stale):
  Call Trace:
  [c0000000e1c83ba0] [0000000000000014] 0x14 (unreliable)
  [c0000000e1c83bc0] [c000000000765798] lkdtm_do_action+0x48/0x80
  [c0000000e1c83bf0] [c000000000765a40] direct_entry+0x110/0x1b0
  [c0000000e1c83c90] [c00000000058e650] full_proxy_write+0x90/0xe0
  [c0000000e1c83ce0] [c0000000003aae3c] __vfs_write+0x6c/0x1f0
  [c0000000e1c83d80] [c0000000003ab214] vfs_write+0xd4/0x240
  [c0000000e1c83dd0] [c0000000003ab5cc] ksys_write+0x6c/0x110
  [c0000000e1c83e30] [c00000000000b860] system_call+0x58/0x6c
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>

Currently the options we have for sending NMIs are not necessarily
safe, that is they can potentially interrupt a CPU in a
non-recoverable region of code, meaning the kernel must then panic().

But we'd like to use smp_send_nmi_ipi() to do cross-CPU calls in
situations where we don't want to risk a panic(), because it doesn't
have the requirement that interrupts must be enabled like
smp_call_function().

So add an API for the caller to indicate that it wants to use the NMI
infrastructure, but doesn't want to do anything "unsafe".

Currently that is implemented by not actually calling cause_nmi_ipi(),
instead falling back to an IPI. In future we can pass the safe
parameter down to cause_nmi_ipi() and the individual backends can
potentially take it into account before deciding what to do.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>

A CPU that gets stuck with interrupts hard disable can be difficult to
debug, as on some platforms we have no way to interrupt the CPU to
find out what it's doing.

A stop-gap is to have the CPU save it's stack pointer (r1) in its paca
when it hard disables interrupts. That way if we can't interrupt it,
we can at least trace the stack based on where it last disabled
interrupts.

In some cases that will be total junk, but the stack trace code should
handle that. In the simple case of a CPU that disable interrupts and
then gets stuck in a loop, the stack trace should be informative.

We could clear the saved stack pointer when we enable interrupts, but
that loses information which could be useful if we have nothing else
to go on.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>

set_fs() sets the addr_limit, which is used in access_ok() to
determine if an address is a user or kernel address.

Some code paths use set_fs() to temporarily elevate the addr_limit so
that kernel code can read/write kernel memory as if it were user
memory. That is fine as long as the code can't ever return to
userspace with the addr_limit still elevated.

If that did happen, then userspace can read/write kernel memory as if
it were user memory, eg. just with write(2). In case it's not clear,
that is very bad. It has also happened in the past due to bugs.

Commit 5ea0727b ("x86/syscalls: Check address limit on user-mode
return") added a mechanism to check the addr_limit value before
returning to userspace. Any call to set_fs() sets a thread flag,
TIF_FSCHECK, and if we see that on the return to userspace we go out
of line to check that the addr_limit value is not elevated.

For further info see the above commit, as well as:
  https://lwn.net/Articles/722267/
  https://bugs.chromium.org/p/project-zero/issues/detail?id=990

Verified to work on 64-bit Book3S using a POC that objdumps the system
call handler, and a modified lkdtm_CORRUPT_USER_DS() that doesn't kill
the caller.

Before:
  $ sudo ./test-tif-fscheck
  ...
  0000000000000000 <.data>:
         0:       e1 f7 8a 79     rldicl. r10,r12,30,63
         4:       80 03 82 40     bne     0x384
         8:       00 40 8a 71     andi.   r10,r12,16384
         c:       78 0b 2a 7c     mr      r10,r1
        10:       10 fd 21 38     addi    r1,r1,-752
        14:       08 00 c2 41     beq-    0x1c
        18:       58 09 2d e8     ld      r1,2392(r13)
        1c:       00 00 41 f9     std     r10,0(r1)
        20:       70 01 61 f9     std     r11,368(r1)
        24:       78 01 81 f9     std     r12,376(r1)
        28:       70 00 01 f8     std     r0,112(r1)
        2c:       78 00 41 f9     std     r10,120(r1)
        30:       20 00 82 41     beq     0x50
        34:       a6 42 4c 7d     mftb    r10

After:

  $ sudo ./test-tif-fscheck
  Killed

And in dmesg:
  Invalid address limit on user-mode return
  WARNING: CPU: 1 PID: 3689 at ../include/linux/syscalls.h:260 do_notify_resume+0x140/0x170
  ...
  NIP [c00000000001ee50] do_notify_resume+0x140/0x170
  LR [c00000000001ee4c] do_notify_resume+0x13c/0x170
  Call Trace:
    do_notify_resume+0x13c/0x170 (unreliable)
    ret_from_except_lite+0x70/0x74

Performance overhead is essentially zero in the usual case, because
the bit is checked as part of the existing _TIF_USER_WORK_MASK check.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

It's called 'fs' for historical reasons, it's named after the x86 'FS'
register. But we don't have to use that name for the member of
thread_struct, and in fact arch/x86 doesn't even call it 'fs' anymore.

So rename it to 'addr_limit', which better reflects what it's used
for, and is also the name used on other arches.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In PPC_PTRACE_GETHWDBGINFO and PPC_PTRACE_SETHWDEBUG we do an
access_ok() check and then __copy_{from,to}_user().

Instead we should just use copy_{from,to}_user() which does all that
for us and is less error prone.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The EEH report functions now share a fair bit of code around the start
and end of each function.

So factor out as much as possible, and move the traversal into a
custom function. This also allows accurate debug to be generated more
easily.
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
[mpe: Format with clang-format]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

If a device without a driver is recovered via EEH, the flag
EEH_DEV_NO_HANDLER is incorrectly left set on the device after
recovery, because the test in eeh_report_resume() for the existence of
a bound driver is done before the flag is cleared. If a driver is
later bound, and EEH experienced again, some of the drivers EEH
handers are not called.

To correct this, clear the flag unconditionally after EEH processing
is complete.
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

To ease future refactoring, extract calls to eeh_enable_irq() and
eeh_disable_irq() from the various report functions. This makes
the report functions initial sequences more similar, as well as making
the IRQ changes visible when reading eeh_handle_normal_event().
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

To ease future refactoring, extract setting of the channel state
from the report functions out into their own functions. This increases
the amount of code that is identical across all of the report
functions.
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The same test is done in every EEH report function, so factor it out.

Since eeh_dev_removed() needs to be moved higher up in the file,
simplify it a little while we're at it.
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add a for_each-style macro for iterating through PEs without the
boilerplate required by a traversal function. eeh_pe_next() is now
exported, as it is now used directly in place.
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

As EEH event handling progresses, a cumulative result of type
pci_ers_result is built up by (some of) the eeh_report_*() functions
using either:
	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
or:
	if ((*res == PCI_ERS_RESULT_NONE) ||
	    (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
	if (*res == PCI_ERS_RESULT_DISCONNECT &&
	    rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
(Where *res is the accumulator.)

However, the intent is not immediately clear and the result in some
situations is order dependent.

Address this by assigning a priority to each result value, and always
merging to the highest priority. This renders the intent clear, and
provides a stable value for all orderings.
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
[mpe: Minor formatting (clang-format)]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>