提交 · 60d3894807b7b5c977c72a3fca16c181e149eb31 · openeuler / Kernel

15 6月, 2021 40 次提交

btrfs: tree-checker: do not error out if extent ref hash doesn't match · 60d38948

由 Josef Bacik 提交于 6月 15, 2021

stable inclusion
from stable-5.10.43
commit 1d62b7ac83e0791200563b9c2deb658c2d196dcf
bugzilla: 109284
CVE: NA

--------------------------------

commit 1119a72e upstream.

The tree checker checks the extent ref hash at read and write time to
make sure we do not corrupt the file system.  Generally extent
references go inline, but if we have enough of them we need to make an
item, which looks like

key.objectid	= <bytenr>
key.type	= <BTRFS_EXTENT_DATA_REF_KEY|BTRFS_TREE_BLOCK_REF_KEY>
key.offset	= hash(tree, owner, offset)

However if key.offset collide with an unrelated extent reference we'll
simply key.offset++ until we get something that doesn't collide.
Obviously this doesn't match at tree checker time, and thus we error
while writing out the transaction.  This is relatively easy to
reproduce, simply do something like the following

  xfs_io -f -c "pwrite 0 1M" file
  offset=2

  for i in {0..10000}
  do
	  xfs_io -c "reflink file 0 ${offset}M 1M" file
	  offset=$(( offset + 2 ))
  done

  xfs_io -c "reflink file 0 17999258914816 1M" file
  xfs_io -c "reflink file 0 35998517829632 1M" file
  xfs_io -c "reflink file 0 53752752058368 1M" file

  btrfs filesystem sync

And the sync will error out because we'll abort the transaction.  The
magic values above are used because they generate hash collisions with
the first file in the main subvol.

The fix for this is to remove the hash value check from tree checker, as
we have no idea which offset ours should belong to.
Reported-by: NTuomas Lähdekorpi <tuomas.lahdekorpi@gmail.com>
Fixes: 0785a9aa ("btrfs: tree-checker: Add EXTENT_DATA_REF check")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ add comment]
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

60d38948

ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed · 833c0018

由 Ye Bin 提交于 6月 07, 2021

mainline inclusion
from mainline-v5.13-rc5
commit 082cd4ec
category: bugfix
bugzilla: 55102
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=082cd4ec240b8734a82a89ffb890216ac98fec68

-----------------------------------------------

We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553]  ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975]  ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368]  ext4_find_extent+0x300/0x330 [ext4]
[130747.335759]  ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179]  ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567]  ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995]  ext4_readpage+0x54/0x100 [ext4]
[130747.337359]  generic_file_buffered_read+0x410/0xae8
[130747.337767]  generic_file_read_iter+0x114/0x190
[130747.338152]  ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556]  __vfs_read+0x11c/0x188
[130747.338851]  vfs_read+0x94/0x150
[130747.339110]  ksys_read+0x74/0xf0

This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable).  Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."

Cc: stable@kernel.org
Signed-off-by: NYe Bin <yebin10@huawei.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.comSigned-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NYe Bin <yebin10@huawei.com>
Reviewed-by: NZhang Yi <yi.zhang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

833c0018

usb: core: reduce power-on-good delay time of root hub · f148afec

由 Chunfeng Yun 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 972b4c19f55da91a42682c74634d36bf5ef3061c
bugzilla: 55093
CVE: NA

--------------------------------

commit 90d28fb5 upstream.

Return the exactly delay time given by root hub descriptor,
this helps to reduce resume time etc.

Due to the root hub descriptor is usually provided by the host
controller driver, if there is compatibility for a root hub,
we can fix it easily without affect other root hub
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

f148afec

neighbour: Prevent Race condition in neighbour subsytem · e857e4be

由 Chinmay Agarwal 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 5c7b23b7962865766147c5d7dc3f6e15b96dbe18
bugzilla: 55093
CVE: NA

--------------------------------

commit eefb45ee upstream.

Following Race Condition was detected:

<CPU A, t0>: Executing: __netif_receive_skb() ->__netif_receive_skb_core()
-> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which
takes a reference on neighbour entry 'n'.
Moves further along, arp_process() and calls neigh_update()->
__neigh_update(). Neighbour entry is unlocked just before a call to
neigh_update_gc_list.

This unlocking paves way for another thread that may take a reference on
the same and mark it dead and remove it from gc_list.

<CPU B, t1> - neigh_flush_dev() is under execution and calls
neigh_mark_dead(n) marking the neighbour entry 'n' as dead. Also n will be
removed from gc_list.
Moves further along neigh_flush_dev() and calls
neigh_cleanup_and_release(n), but since reference count increased in t1,
'n' couldn't be destroyed.

<CPU A, t3>- Code hits neigh_update_gc_list, with neighbour entry
set as dead.

<CPU A, t4> - arp_process() finally calls neigh_release(n), destroying
the neighbour entry and we have a destroyed ntry still part of gc_list.

Fixes: eb4e8fac("neighbour: Prevent a dead entry from updating gc_list")
Signed-off-by: NChinmay Agarwal <chinagar@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

e857e4be

scripts/clang-tools: switch explicitly to Python 3 · 5a3ac631

由 Masahiro Yamada 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 9427906999778401518c592662c8801d00eb46bb
bugzilla: 55093
CVE: NA

--------------------------------

commit 074075ae upstream.

For the same reason as commit 51839e29 ("scripts: switch explicitly
to Python 3"), switch some more scripts, which I tested and confirmed
working on Python 3.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Acked-by: NNathan Chancellor <nathan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

5a3ac631

net: hso: bail out on interrupt URB allocation failure · 91d79aaf

由 Johan Hovold 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit c1febac44856c9346bef939b9b0987ee8f0609e2
bugzilla: 55093
CVE: NA

--------------------------------

commit 4d52ebc7 upstream.

Commit 31db0dbd ("net: hso: check for allocation failure in
hso_create_bulk_serial_device()") recently started returning an error
when the driver fails to allocate resources for the interrupt endpoint
and tiocmget functionality.

For consistency let's bail out from probe also if the URB allocation
fails.
Signed-off-by: NJohan Hovold <johan@kernel.org>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

91d79aaf

Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference"" · 05e29e34

由 Greg Kroah-Hartman 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 0e3045c15ff9d44e7ac56c0f70d671ac03694bb2
bugzilla: 55093
CVE: NA

--------------------------------

commit 27b57bb7 upstream.

This reverts commit 4667a6fc.

Takashi writes:
	I have already started working on the bigger cleanup of this driver
	code based on 5.13-rc1, so could you drop this revert?

I missed our previous discussion about this, my fault for applying it.
Reported-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

05e29e34

SUNRPC: More fixes for backlog congestion · b73c5591

由 Trond Myklebust 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 899b5131e74cd09ddd204addf763deaf6870ab57
bugzilla: 55093
CVE: NA

--------------------------------

commit e86be3a0 upstream.

Ensure that we fix the XPRT_CONGESTED starvation issue for RDMA as well
as socket based transports.
Ensure we always initialise the request after waking up from the backlog
list.

Fixes: e877a88d ("SUNRPC in case of backlog, hand free slots directly to waiting task")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

b73c5591

bpftool: Add sock_release help info for cgroup attach/prog load command · fb567b74

由 Liu Jian 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit c2779f8ddc9ac9206b2ee7fe397cd17921fabc67
bugzilla: 55093
CVE: NA

--------------------------------

commit a8deba85 upstream.

The help information was not added at the time when the function got added.
Fix this and add the missing information to its cli, documentation and bash
completion.

Fixes: db94cc0b ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE")
Signed-off-by: NLiu Jian <liujian56@huawei.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

fb567b74

net: hns3: check the return of skb_checksum_help() · 71902e83

由 Yunsheng Lin 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 534b6229196efe56c4db3ba05321556f39ed51de
bugzilla: 55093
CVE: NA

--------------------------------

commit 9bb5a495 upstream.

Currently skb_checksum_help()'s return is ignored, but it may
return error when it fails to allocate memory when linearizing.

So adds checking for the return of skb_checksum_help().

Fixes: 76ad4f0e("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Fixes: 3db084d2("net: hns3: Fix for vxlan tx checksum bug")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

71902e83

samples/bpf: Consider frame size in tx_only of xdpsock sample · 1924f665

由 Magnus Karlsson 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit bc924bbccc50f28d9b9dc43dd747a43044e0130f
bugzilla: 55093
CVE: NA

--------------------------------

commit 3b80d106 upstream.

Fix the tx_only micro-benchmark in xdpsock to take frame size into
consideration. It was hardcoded to the default value of frame_size
which is 4K. Changing this on the command line to 2K made half of the
packets illegal as they were outside the umem and were therefore
discarded by the kernel.

Fixes: 46738f73 ("samples/bpf: add use of need_wakeup flag in xdpsock")
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210506124349.6666-1-magnus.karlsson@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

1924f665

i915: fix build warning in intel_dp_get_link_status() · 18937af2

由 Greg Kroah-Hartman 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 02ce4c943e2ed7660786d3618afadf27b61b0758
bugzilla: 55093
CVE: NA

--------------------------------

There is a build warning using gcc-11 showing a mis-match in the .h and .c
definitions of intel_dp_get_link_status():
  CC [M]  drivers/gpu/drm/i915/display/intel_dp.o
drivers/gpu/drm/i915/display/intel_dp.c:4139:56: warning: argument 2 of type ‘u8[6]’ {aka ‘unsigned char[6]’} with mismatched bound [-Warray-parameter=]
 4139 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 link_status[DP_LINK_STATUS_SIZE])
      |                                                     ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/gpu/drm/i915/display/intel_dp.c:51:
drivers/gpu/drm/i915/display/intel_dp.h:105:57: note: previously declared as ‘u8 *’ {aka ‘unsigned char *’}
  105 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 *link_status);
      |                                                     ~~~~^~~~~~~~~~~

This was fixed accidentally commit b30edfd8 ("drm/i915: Switch to LTTPR
non-transparent mode link training") by getting rid of the function entirely,
but that is not a viable backport for a stable kernel, so just fix up the
function definition to remove the build warning entirely.  There is no
functional change for this, and it fixes up one of the last 'make allmodconfig'
build warnings when using gcc-11 on this kernel tree.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

18937af2

net: mvpp2: add buffer header handling in RX · e992000e

由 Stefan Chulski 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 8d2ab018a07a05b67c8b2435aa8b5e880a494f01
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 17f9c1b6 ]

If Link Partner sends frames larger than RX buffer size, MAC mark it
as oversize but still would pass it to the Packet Processor.
In this scenario, Packet Processor scatter frame between multiple buffers,
but only a single buffer would be returned to the Buffer Manager pool and
it would not refill the poll.

Patch add handling of oversize error with buffer header handling, so all
buffers would be returned to the Buffer Manager pool.

Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

e992000e

net: zero-initialize tc skb extension on allocation · 97bc331b

由 Vlad Buslov 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit ac493452e937b8939eaf2d24cac51a4804b6c20e
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 9453d45e ]

Function skb_ext_add() doesn't initialize created skb extension with any
value and leaves it up to the user. However, since extension of type
TC_SKB_EXT originally contained only single value tc_skb_ext->chain its
users used to just assign the chain value without setting whole extension
memory to zero first. This assumption changed when TC_SKB_EXT extension was
extended with additional fields but not all users were updated to
initialize the new fields which leads to use of uninitialized memory
afterwards. UBSAN log:

[  778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28
[  778.301495] load of value 107 is not a valid value for type '_Bool'
[  778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2
[  778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  778.307901] Call Trace:
[  778.308680]  <IRQ>
[  778.309358]  dump_stack+0xbb/0x107
[  778.310307]  ubsan_epilogue+0x5/0x40
[  778.311167]  __ubsan_handle_load_invalid_value.cold+0x43/0x48
[  778.312454]  ? memset+0x20/0x40
[  778.313230]  ovs_flow_key_extract.cold+0xf/0x14 [openvswitch]
[  778.314532]  ovs_vport_receive+0x19e/0x2e0 [openvswitch]
[  778.315749]  ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch]
[  778.317188]  ? create_prof_cpu_mask+0x20/0x20
[  778.318220]  ? arch_stack_walk+0x82/0xf0
[  778.319153]  ? secondary_startup_64_no_verify+0xb0/0xbb
[  778.320399]  ? stack_trace_save+0x91/0xc0
[  778.321362]  ? stack_trace_consume_entry+0x160/0x160
[  778.322517]  ? lock_release+0x52e/0x760
[  778.323444]  netdev_frame_hook+0x323/0x610 [openvswitch]
[  778.324668]  ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch]
[  778.325950]  __netif_receive_skb_core+0x771/0x2db0
[  778.327067]  ? lock_downgrade+0x6e0/0x6f0
[  778.328021]  ? lock_acquire+0x565/0x720
[  778.328940]  ? generic_xdp_tx+0x4f0/0x4f0
[  778.329902]  ? inet_gro_receive+0x2a7/0x10a0
[  778.330914]  ? lock_downgrade+0x6f0/0x6f0
[  778.331867]  ? udp4_gro_receive+0x4c4/0x13e0
[  778.332876]  ? lock_release+0x52e/0x760
[  778.333808]  ? dev_gro_receive+0xcc8/0x2380
[  778.334810]  ? lock_downgrade+0x6f0/0x6f0
[  778.335769]  __netif_receive_skb_list_core+0x295/0x820
[  778.336955]  ? process_backlog+0x780/0x780
[  778.337941]  ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core]
[  778.339613]  ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0
[  778.341033]  ? kvm_clock_get_cycles+0x14/0x20
[  778.342072]  netif_receive_skb_list_internal+0x5f5/0xcb0
[  778.343288]  ? __kasan_kmalloc+0x7a/0x90
[  778.344234]  ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core]
[  778.345676]  ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core]
[  778.347140]  ? __netif_receive_skb_list_core+0x820/0x820
[  778.348351]  ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core]
[  778.349688]  ? napi_gro_flush+0x26c/0x3c0
[  778.350641]  napi_complete_done+0x188/0x6b0
[  778.351627]  mlx5e_napi_poll+0x373/0x1b80 [mlx5_core]
[  778.352853]  __napi_poll+0x9f/0x510
[  778.353704]  ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core]
[  778.355158]  net_rx_action+0x34c/0xa40
[  778.356060]  ? napi_threaded_poll+0x3d0/0x3d0
[  778.357083]  ? sched_clock_cpu+0x18/0x190
[  778.358041]  ? __common_interrupt+0x8e/0x1a0
[  778.359045]  __do_softirq+0x1ce/0x984
[  778.359938]  __irq_exit_rcu+0x137/0x1d0
[  778.360865]  irq_exit_rcu+0xa/0x20
[  778.361708]  common_interrupt+0x80/0xa0
[  778.362640]  </IRQ>
[  778.363212]  asm_common_interrupt+0x1e/0x40
[  778.364204] RIP: 0010:native_safe_halt+0xe/0x10
[  778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00
[  778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246
[  778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468
[  778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e
[  778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb
[  778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000
[  778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000
[  778.378491]  ? rcu_eqs_enter.constprop.0+0xb8/0xe0
[  778.379606]  ? default_idle_call+0x5e/0xe0
[  778.380578]  default_idle+0xa/0x10
[  778.381406]  default_idle_call+0x96/0xe0
[  778.382350]  do_idle+0x3d4/0x550
[  778.383153]  ? arch_cpu_idle_exit+0x40/0x40
[  778.384143]  cpu_startup_entry+0x19/0x20
[  778.385078]  start_kernel+0x3c7/0x3e5
[  778.385978]  secondary_startup_64_no_verify+0xb0/0xbb

Fix the issue by providing new function tc_skb_ext_alloc() that allocates
tc skb extension and initializes its memory to 0 before returning it to the
caller. Change all existing users to use new API instead of calling
skb_ext_add() directly.

Fixes: 038ebb1a ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Fixes: d29334c1 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Acked-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

97bc331b

MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c · 49710a4c

由 Randy Dunlap 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 8cad65950b180fc855c7d28daf856a908b4974ba
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit fef532ea ]

rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However,
when this watchdog driver is built as a loadable module, there is a
build error since the rt_sysc_membase symbol is not exported.
Export it to quell the build error.

ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined!

Fixes: 473cf939 ("watchdog: add ralink watchdog driver")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

49710a4c

MIPS: alchemy: xxs1500: add gpio-au1000.h header file · 710e3aa2

由 Randy Dunlap 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 70a922f590686a5aecbae30a21923289b6eada0a
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit ff4cff96 ]

board-xxs1500.c references 2 functions without declaring them, so add
the header file to placate the build.

../arch/mips/alchemy/board-xxs1500.c: In function 'board_setup':
../arch/mips/alchemy/board-xxs1500.c:56:2: error: implicit declaration of function 'alchemy_gpio1_input_enable' [-Werror=implicit-function-declaration]
   56 |  alchemy_gpio1_input_enable();
../arch/mips/alchemy/board-xxs1500.c:57:2: error: implicit declaration of function 'alchemy_gpio2_enable'; did you mean 'alchemy_uart_enable'? [-Werror=implicit-function-declaration]
   57 |  alchemy_gpio2_enable();

Fixes: 8e026910 ("MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: NManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

710e3aa2

net: hsr: fix mac_len checks · 1f003521

由 George McCollister 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit f6442ee08fe66c8e45c4f246531a2aaf4f17a7a7
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 48b491a5 ]

Commit 2e9f6093 ("net: hsr: check skb can contain struct hsr_ethhdr
in fill_frame_info") added the following which resulted in -EINVAL
always being returned:
	if (skb->mac_len < sizeof(struct hsr_ethhdr))
		return -EINVAL;

mac_len was not being set correctly so this check completely broke
HSR/PRP since it was always 14, not 20.

Set mac_len correctly and modify the mac_len checks to test in the
correct places since sometimes it is legitimately 14.

Fixes: 2e9f6093 ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info")
Signed-off-by: NGeorge McCollister <george.mccollister@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

1f003521

sch_dsmark: fix a NULL deref in qdisc_reset() · a89a6255

由 Taehee Yoo 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit a6a0af3c902c6c9b126755b9c2df92bb46275b3e
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 9b76eade ]

If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called.
When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't
initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset())
uses dsmark_qdisc_data->q pointer wihtout any null checking.
So, panic would occur.

Test commands:
    sysctl net.core.default_qdisc=dsmark -w
    ip link add dummy0 type dummy
    ip link add vw0 link dummy0 type virt_wifi
    ip link set vw0 up

Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 3 PID: 684 Comm: ip Not tainted 5.12.0+ #910
RIP: 0010:qdisc_reset+0x2b/0x680
Code: 1f 44 00 00 48 b8 00 00 00 00 00 fc ff df 41 57 41 56 41 55 41 54
55 48 89 fd 48 83 c7 18 53 48 89 fa 48 c1 ea 03 48 83 ec 20 <80> 3c 02
00 0f 85 09 06 00 00 4c 8b 65 18 0f 1f 44 00 00 65 8b 1d
RSP: 0018:ffff88800fda6bf8 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffff8880050ed800 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff99e34100 RDI: 0000000000000018
RBP: 0000000000000000 R08: fffffbfff346b553 R09: fffffbfff346b553
R10: 0000000000000001 R11: fffffbfff346b552 R12: ffffffffc0824940
R13: ffff888109e83800 R14: 00000000ffffffff R15: ffffffffc08249e0
FS:  00007f5042287680(0000) GS:ffff888119800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ae1f4dbd90 CR3: 0000000006760002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ? rcu_read_lock_bh_held+0xa0/0xa0
 dsmark_reset+0x3d/0xf0 [sch_dsmark]
 qdisc_reset+0xa9/0x680
 qdisc_destroy+0x84/0x370
 qdisc_create_dflt+0x1fe/0x380
 attach_one_default_qdisc.constprop.41+0xa4/0x180
 dev_activate+0x4d5/0x8c0
 ? __dev_open+0x268/0x390
 __dev_open+0x270/0x390

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

a89a6255

net: ethernet: mtk_eth_soc: Fix packet statistics support for MT7628/88 · ee550814

由 Stefan Roese 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit cd751bde9e0dd23d9c512528722f4d8bf0782759
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit ad79fd2c ]

The MT7628/88 SoC(s) have other (limited) packet counter registers than
currently supported in the mtk_eth_soc driver. This patch adds support
for reading these registers, so that the packet statistics are correctly
updated.

Additionally the defines for the non-MT7628 variant packet counter
registers are added and used in this patch instead of using hard coded
values.
Signed-off-by: NStefan Roese <sr@denx.de>
Fixes: 296c9120 ("net: ethernet: mediatek: Add MT7628/88 SoC support")
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Reto Schneider <code@reto-schneider.ch>
Cc: Reto Schneider <reto.schneider@husqvarnagroup.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

ee550814

ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static · 69085133

由 kernel test robot 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit f103ae7c9c8bca7a6f1d237e95445c1e52443081
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 2b899f31 ]

sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static?

Fixes: 265d1a90 ("ALSA: usb-audio: scarlett2: Improve driver startup messages")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

69085133

ipv6: record frag_max_size in atomic fragments in input path · 1accb063

由 Francesco Ruggeri 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 5a2e1ce7abc2895fac02234efe1be37a362dbae9
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit e29f011e ]

Commit dbd1759e ("ipv6: on reassembly, record frag_max_size")
filled the frag_max_size field in IP6CB in the input path.
The field should also be filled in case of atomic fragments.

Fixes: dbd1759e ('ipv6: on reassembly, record frag_max_size')
Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

1accb063

net: lantiq: fix memory corruption in RX ring · 584f3dc7

由 Aleksander Jan Bajkowski 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 5ac72351655f8b033a2935646f53b7465c903418
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit c7718ee9 ]

In a situation where memory allocation or dma mapping fails, an
invalid address is programmed into the descriptor. This can lead
to memory corruption. If the memory allocation fails, DMA should
reuse the previous skb and mapping and drop the packet. This patch
also increments rx drop counter.

Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ")
Signed-off-by: NAleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

584f3dc7

scsi: libsas: Use _safe() loop in sas_resume_port() · 59edb346

由 Dan Carpenter 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 988439906f6fa243846cd0526bc7175979c89014
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 8c7e7b84 ]

If sas_notify_lldd_dev_found() fails then this code calls:

	sas_unregister_dev(port, dev);

which removes "dev", our list iterator, from the list.  This could lead to
an endless loop.  We need to use list_for_each_entry_safe().

Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda
Fixes: 303694ee ("[SCSI] libsas: suspend / resume support")
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

59edb346

ASoC: qcom: lpass-cpu: Use optional clk APIs · a9bd8539

由 Stephen Boyd 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 3a17d8adfa02ea5b1d7719d7dbc5a1727684ee03
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit af270254 ]

This driver spits out a warning for me at boot:

 sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2

but it looks like it is all an optional clk. Use the optional clk APIs
here so that we don't see this message and everything else is the same.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Fixes: 3e53ac82 ("ASoC: qcom: make osr clock optional")
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Reviewed-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.orgSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

a9bd8539

ixgbe: fix large MTU request from VF · e2f4ff1a

由 Jesse Brandeburg 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 3cfd11506ed032446358eedf7e31b4defd819d91
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 63e39d29 ]

Check that the MTU value requested by the VF is in the supported
range of MTUs before attempting to set the VF large packet enable,
otherwise reject the request. This also avoids unnecessary
register updates in the case of the 82599 controller.

Fixes: 872844dd ("ixgbe: Enable jumbo frames support w/ SR-IOV")
Co-developed-by: NPiotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: NPiotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

e2f4ff1a

bpf: Set mac_len in bpf_skb_change_head · 1859cfd7

由 Jussi Maki 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 9948170c8eb41f767a3125e9cfa22e9f6fcd400a
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 84316ca4 ]

The skb_change_head() helper did not set "skb->mac_len", which is
problematic when it's used in combination with skb_redirect_peer().
Without it, redirecting a packet from a L3 device such as wireguard to
the veth peer device will cause skb->data to point to the middle of the
IP header on entry to tcp_v4_rcv() since the L2 header is not pulled
correctly due to mac_len=0.

Fixes: 3a0af8fd ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: NJussi Maki <joamaki@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210519154743.2554771-2-joamaki@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

1859cfd7

bpf, offload: Reorder offload callback 'prepare' in verifier · cbb9d06a

由 Yinjun Zhang 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 24cb8bb7f62367e81242fbec2a8813c4c660098e
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit ceb11679 ]

Commit 4976b718 ("bpf: Introduce pseudo_btf_id") switched the
order of resolve_pseudo_ldimm(), in which some pseudo instructions
are rewritten. Thus those rewritten instructions cannot be passed
to driver via 'prepare' offload callback.

Reorder the 'prepare' offload callback to fix it.

Fixes: 4976b718 ("bpf: Introduce pseudo_btf_id")
Signed-off-by: NYinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NSong Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210520085834.15023-1-simon.horman@netronome.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

cbb9d06a

ASoC: cs35l33: fix an error code in probe() · 7020433d

由 Dan Carpenter 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 78d5f411615a7d59974c5aa33d572e5ea918ea8f
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 833bc4cf ]

This error path returns zero (success) but it should return -EINVAL.

Fixes: 3333cb71 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwandaSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

7020433d

staging: emxx_udc: fix loop in _nbu2ss_nuke() · 47cdba33

由 Dan Carpenter 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit d29df5fc69ee6e9d109c59159d82fffacb381c93
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit e0112a7c ]

The _nbu2ss_ep_done() function calls:

	list_del_init(&req->queue);

which means that the loop will never exit.

Fixes: ca3d253e ("Staging: emxx_udc: Iterate list using list_for_each_entry")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YKUd0sDyjm/lkJfJ@mwandaSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

47cdba33

cxgb4: avoid accessing registers when clearing filters · 2e585ca2

由 Raju Rangoju 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 02f03883fdb10ad7e66717c70ea163a8d27ae6e7
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 88c380df ]

Hardware register having the server TID base can contain
invalid values when adapter is in bad state (for example,
due to AER fatal error). Reading these invalid values in the
register can lead to out-of-bound memory access. So, fix
by using the saved server TID base when clearing filters.

Fixes: b1a79360 ("cxgb4: Delete all hash and TCAM filters before resource cleanup")
Signed-off-by: NRaju Rangoju <rajur@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

2e585ca2

iommu/vt-d: Use user privilege for RID2PASID translation · 23aba7e9

由 Lu Baolu 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit a5212518b78c05150d675abb280cae194c564122
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 54c80d90 ]

When first-level page tables are used for IOVA translation, we use user
privilege by setting U/S bit in the page table entry. This is to make it
consistent with the second level translation, where the U/S enforcement
is not available. Clear the SRE (Supervisor Request Enable) field in the
pasid table entry of RID2PASID so that requests requesting the supervisor
privilege are blocked and treated as DMA remapping faults.

Fixes: b802d070 ("iommu/vt-d: Use iova over first level")
Suggested-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210512064426.3440915-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210519015027.108468-3-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

23aba7e9

net: hns3: put off calling register_netdev() until client initialize complete · 79bacdcd

由 Jian Shen 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit a663c1e418a3b5b8e8edfad4bc8e7278c312d6fc
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit a289a7e5 ]

Currently, the netdevice is registered before client initializing
complete. So there is a timewindow between netdevice available
and usable. In this case, if user try to change the channel number
or ring param, it may cause the hns3_set_rx_cpu_rmap() being called
twice, and report bug.

[47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0
[47199.430340] hns3 0000:35:00.0 eth1: already uninitialized
[47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1
[47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1
[47200.163524] ------------[ cut here ]------------
[47200.171674] kernel BUG at lib/cpu_rmap.c:142!
[47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge]
[47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G           O      5.11.0-rc3+ #1
[47200.215601] Hardware name:  , xxxxxx 02/04/2021
[47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[47200.230188] pc : cpu_rmap_add+0x38/0x40
[47200.237472] lr : irq_cpu_rmap_add+0x84/0x140
[47200.243291] sp : ffff800010e93a30
[47200.247295] x29: ffff800010e93a30 x28: ffff082100584880
[47200.254155] x27: 0000000000000000 x26: 0000000000000000
[47200.260712] x25: 0000000000000000 x24: 0000000000000004
[47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0
[47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680
[47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0
[47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0
[47200.293456] x15: fffffc2082990600 x14: dead000000000122
[47200.300059] x13: ffffffffffffffff x12: 000000000000003e
[47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000
[47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700
[47200.319682] x7 : 0000000000000000 x6 : 000000000000003f
[47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20
[47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80
[47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004
[47200.346058] Call trace:
[47200.349324]  cpu_rmap_add+0x38/0x40
[47200.354300]  hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3]
[47200.362294]  hns3_reset_notify_init_enet+0x1cc/0x340 [hns3]
[47200.370049]  hns3_change_channels+0x40/0xb0 [hns3]
[47200.376770]  hns3_set_channels+0x12c/0x2a0 [hns3]
[47200.383353]  ethtool_set_channels+0x140/0x250
[47200.389772]  dev_ethtool+0x714/0x23d0
[47200.394440]  dev_ioctl+0x4cc/0x640
[47200.399277]  sock_do_ioctl+0x100/0x2a0
[47200.404574]  sock_ioctl+0x28c/0x470
[47200.409079]  __arm64_sys_ioctl+0xb4/0x100
[47200.415217]  el0_svc_common.constprop.0+0x84/0x210
[47200.422088]  do_el0_svc+0x28/0x34
[47200.426387]  el0_svc+0x28/0x70
[47200.431308]  el0_sync_handler+0x1a4/0x1b0
[47200.436477]  el0_sync+0x174/0x180
[47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000)
[47200.448869] ---[ end trace a01efe4ce42e5f34 ]---

The process is like below:
excuting hns3_client_init
|
register_netdev()
|                           hns3_set_channels()
|                           |
hns3_set_rx_cpu_rmap()      hns3_reset_notify_uninit_enet()
|                               |
|                            quit without calling function
|                            hns3_free_rx_cpu_rmap for flag
|                            HNS3_NIC_STATE_INITED is unset.
|                           |
|                           hns3_reset_notify_init_enet()
|                               |
set HNS3_NIC_STATE_INITED    call hns3_set_rx_cpu_rmap()-- crash

Fix it by calling register_netdev() at the end of function
hns3_client_init().

Fixes: 08a10068 ("net: hns3: re-organize vector handle")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

79bacdcd

net: hns3: fix incorrect resp_msg issue · 49346431

由 Jiaran Zhang 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 09867c500ec41e9b5a942d111554023a8c57cb72
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit a710b9ff ]

In hclge_mbx_handler(), if there are two consecutive mailbox
messages that requires resp_msg, the resp_msg is not cleared
after processing the first message, which will cause the resp_msg
data of second message incorrect.

Fix it by clearing the resp_msg before processing every mailbox
message.

Fixes: bb5790b7 ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

49346431

iommu/virtio: Add missing MODULE_DEVICE_TABLE · a64c503f

由 Bixuan Cui 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 815eb57e048b3cbb7c0b9c51105086c4c75fcb27
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 382d91fc ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NBixuan Cui <cuibixuan@huawei.com>
Fixes: fa4afd78 ("iommu/virtio: Build virtio-iommu as module")
Reviewed-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210508031451.53493-1-cuibixuan@huawei.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

a64c503f

gve: Correct SKB queue index validation. · b0981919

由 David Awogbemila 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 8e534c981d7c45ecb6702178e9ea79d10313f63e
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit fbd4a28b ]

SKBs with skb_get_queue_mapping(skb) == tx_cfg.num_queues should also be
considered invalid.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Acked-by: NWillem de Brujin <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

b0981919

gve: Upgrade memory barrier in poll routine · ce263990

由 Catherine Sullivan 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 48f4ddec0ab9895fde6f2b0d8a091747043e64cd
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit f8178183 ]

As currently written, if the driver checks for more work (via
gve_tx_poll or gve_rx_poll) before the device posts work and the
irq doorbell is not unmasked
(via iowrite32be(GVE_IRQ_ACK | GVE_IRQ_EVENT, ...)) before the device
attempts to raise an interrupt, an interrupt is lost and this could
potentially lead to the traffic being completely halted. For
example, if a tx queue has already been stopped, the driver won't get
the chance to complete work and egress will be halted.

We need a full memory barrier in the poll
routine to ensure that the irq doorbell is unmasked before the driver
checks for more work.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: NCatherine Sullivan <csully@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Acked-by: NWillem de Brujin <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

ce263990

gve: Add NULL pointer checks when freeing irqs. · 2076a690

由 David Awogbemila 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit da21a35c00ff1a1794d4f166d3b3fa8db4d0f6fb
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 5218e919 ]

When freeing notification blocks, we index priv->msix_vectors.
If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors)
this could lead to a NULL pointer dereference if the driver is unloaded.

Fixes: 893ce44d ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Acked-by: NWillem de Brujin <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

2076a690

gve: Update mgmt_msix_idx if num_ntfy changes · 33f36420

由 David Awogbemila 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 7114438671d6ad4be746ad13d74f278db273db0c
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit e96b491a ]

If we do not get the expected number of vectors from
pci_enable_msix_range, we update priv->num_ntfy_blks but not
priv->mgmt_msix_idx. This patch fixes this so that priv->mgmt_msix_idx
is updated accordingly.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

33f36420

gve: Check TX QPL was actually assigned · aab60b8b

由 Catherine Sullivan 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit b6ef5bfcd9d758ad0071c5623f33844808d7e81f
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 5aec55b4 ]

Correctly check the TX QPL was assigned and unassigned if
other steps in the allocation fail.

Fixes: f5cedc84 (gve: Add transmit and receive support)
Signed-off-by: NCatherine Sullivan <csully@google.com>
Signed-off-by: NDavid Awogbemila <awogbemila@google.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

aab60b8b

net/smc: remove device from smcd_dev_list after failed device_add() · 51541197

由 Julian Wiedmann 提交于 6月 07, 2021

stable inclusion
from stable-5.10.42
commit 8b2cdc004d21a7255f219706dca64411108f7897
bugzilla: 55093
CVE: NA

--------------------------------

[ Upstream commit 444d7be9 ]

If the device_add() for a smcd_dev fails, there's no cleanup step that
rolls back the earlier list_add(). The device subsequently gets freed,
and we end up with a corrupted list.

Add some error handling that removes the device from the list.

Fixes: c6ba7c9b ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: NKarsten Graul <kgraul@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

51541197

openeuler / Kernel 1 年多 前同步成功

openeuler / Kernel
1 年多前同步成功