We don't actually need this and it causes problems for internal use of
this functionality. Currently there is a single use of the FILE * pointer.
That is the serial core which uses it to check tty_hung_up_p. However if
that is true then IO_ERROR is also already set so the check may be removed.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use the regshift member of struct uart_port to store the address stride
from platform data. This way we can save one dereference per call of
altera_uart_readl and altera_uart_writel.

This also allows us to use the driver without platform data, which is
needed for device tree support in the Nios2 port.
Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit 6b5756f1 introduced the
possibility for pdev->id being -1 but the change was not done equally in
altera_uart_remove. This patch fixes this.
Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

using VT_SETACTIVATE ioctl for console switch did not work,
since it put wrong param to the set_console function.

Also ioctl returned misleading error, because of the missing
break statement. I wonder anyone has ever used this one :).
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Enables PPS support in atmel serial driver to make PPS API working.
Signed-off-by: NViktar Palstsiuk <viktar.palstsiuk@promwad.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

msm_smd_tty driver provides tty device interface
to 'DS' and 'GPSNMEA' streaming SMD ports.

Cc: Brian Swetland <swetland@google.com>
Signed-off-by: NNiranjana Vishwanathapura <nvishwan@codeaurora.org>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In 8250.c original ns16550 autoconfig code, we change the divisor latch when
we goto to high speed mode, we're assuming the previous speed is legacy. This
some times is not true.

For example in a system with both CONFIG_SERIAL_8250 and
CONFIG_SERIAL_8250_PNP set, in this case, the code (autoconfig) will be called
twice, one in serial8250_init/probe() and the other is from
serial_pnp_probe. When serial_pnp_probe calls the autoconfig for NS16550A,
it's already in high speed mode, change the divisor latch (quot << 3) in this
case will make the UART console garbled.

CC: Greg Kroah-Hartman <greg@kroah.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: linux-kernel@vger.kernel.org
CC: stable@kernel.org
Signed-off-by: NYin Kangkai <kangkai.yin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

For any reason if the NS16550A was not work in high speed mode (e.g. we hold
NS16550A from going to high speed mode in autoconfig_16550a()), now we are
resume from suspend, we should also set the uartclk to the correct
value. Otherwise it is still the old 1843200 and that will bring issues.

CC: Greg Kroah-Hartman <greg@kroah.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: linux-kernel@vger.kernel.org
CC: stable@kernel.org
Signed-off-by: NYin Kangkai <kangkai.yin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

renamed spi_driver variable to not be h/w specific
set driver name to use DRVNAME define
removed commented-out define
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The probe routine should call spi_setup() to configure
the SPI bus so it can properly communicate with the device.
E.g. the device operates in SPI mode 1.

Called spi_setup to configure SPI mode, max_speed_hz, and bpw
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Platforms containing the 6260 can run up to 25Mhz.

For these platforms set max_speed_hz to 25Mhz.
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

driver should support 32bit SPI transfers. The boolean variable
only allowed 8/16.

Changed to support 8/16/32 for future enabling
of 32 bpw.
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver is a SPI protocol driver and has no DMA ops
associated with the device so the call will fail. Furthermore,
the DMA allocation made here will be used by the SPI
controller driver (parent dev) so it makes sense to
pass that device instead.
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The port ops must be set AFTER calling port init as that function
zeroes the structure
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

seems there's no longer need for using con_buf/conf_buf_mtx
as vcs_read/vcs_write buffer for user's data.

The do_con_write function, that was the other user of this,
is currently using its own kmalloc-ed buffer.

Not sure when this got changed, as I was able to find this code
in 2.6.9, but it's already gone as far as current git history
goes - 2.6.12-rc2.

AFAICS there's a behaviour change with the current change.
The lseek is not completely mutually exclusive with the
vcs_read/vcs_write - the file->f_pos might get updated
via lseek callback during the vcs_read/vcs_write processing.

I tried to find out if the prefered behaviour is to keep
this in sync within read/write/lseek functions, but I did
not find any pattern on different places.

I guess if user end up calling write/lseek from different
threads she should know what she's doing. If needed we
could use dedicated fd mutex/buffer.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

there's a race between vcs's lseek handler and VC release.

The lseek handler does not hold console_lock and touches
VC's size info. If during this the VC got released, there's
an access violation.

Following program triggers the issue for me:

[SNIP]
#define _BSD_SOURCE
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/vt.h>
#include <unistd.h>
#include <errno.h>

static int run_seek(void)
{
        while(1) {
                int fd;
                fd = open("./vcs30", O_RDWR);
                while(lseek(fd, 0, 0) != -1);
                close(fd);
        }
}

static int open_ioctl_tty(void)
{
        return open("/dev/tty1", O_RDWR);
}

static int do_ioctl(int fd, int req, int i)
{
        return ioctl(fd, req, i);
}

#define INIT(i) do_ioctl(ioctl_fd, VT_ACTIVATE, i)
#define SHUT(i) do_ioctl(ioctl_fd, VT_DISALLOCATE, i)

int main(int argc, char **argv)
{
        int ioctl_fd = open_ioctl_tty();

        if (ioctl < 0) {
                perror("open tty1 failed\n");
                return -1;
        }

        if ((-1 == mknod("vcs30", S_IFCHR|0666, makedev(7, 30))) &&
            (errno != EEXIST)) {
                printf("errno %d\n", errno);
                perror("failed to create vcs30");
                return -1;
        }

        do_ioctl(ioctl_fd, VT_LOCKSWITCH, 0);

        if (!fork())
                run_seek();

        while(1) {
                INIT(30);
                SHUT(30);
        }

        return 0;
}
[SNIP]
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

printk()s without a priority level default to KERN_WARNING. To reduce
noise at KERN_WARNING, this patch set the priority level appriopriately
for unleveled printks()s. This should be useful to folks that look at
dmesg warnings closely.
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This converts the existing bfin_jtag_comm TTY driver to the HVC layer so
that the common HVC code can worry about all of the TTY/polling crap and
leave the Blackfin code to worry about the Blackfin bits.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

virtual console: add keyboard mode OFF

Add a new mode for the virtual console keyboard OFF in which all input
other than shift keys is ignored. Prevents vt input buffers from
overflowing when a program opens but doesn't read from a tty, like X11
using evdev for input.
Signed-off-by: NArthur Taylor <art@ified.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The inline assembly differences for v6 vs. v7 in the hvc_dcc
driver are purely optimizations. On a v7 processor, an mrc with
the pc sets the condition codes to the 28-31 bits of the register
being read. It just so happens that the TX/RX full bits the DCC
driver is testing for are high enough in the register to be put
into the condition codes. On a v6 processor, this "feature" isn't
implemented and thus we have to do the usual read, mask, test
operations to check for TX/RX full.

Since we already test the RX/TX full bits before calling
__dcc_getchar() and __dcc_putchar() we don't actually need to do
anything special for v7 over v6. The only difference is in
hvc_dcc_get_chars(). We would test RX full, poll RX full, and
then read a character from the buffer, whereas now we will test
RX full, read a character from the buffer, and then test RX full
again for the second iteration of the loop. It doesn't seem
possible for the buffer to go from full to empty between testing
the RX full and reading a character. Therefore, replace the v7
versions with the v6 versions and everything works the same.
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Casting and anding with 0xff is unnecessary in
hvc_dcc_put_chars() since buf is already a char[].
__dcc_get_char() can't return an int less than 0 since it only
returns a char. Simplify the if statement in hvc_dcc_get_chars()
to take this into account.

Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Without marking the asm __dcc_getstatus() volatile my compiler
decides it can cache the value of __ret in a register and then
check the value of it continually in hvc_dcc_put_chars() (I had
to replace get_wait/put_wait with 1 and fixup the branch
otherwise my disassembler barfed on __dcc_(get|put)char).

00000000 <hvc_dcc_put_chars>:
   0:   ee103e11        mrc     14, 0, r3, cr0, cr1, {0}
   4:   e3a0c000        mov     ip, #0  ; 0x0
   8:   e2033202        and     r3, r3, #536870912      ; 0x20000000
   c:   ea000006        b       2c <hvc_dcc_put_chars+0x2c>
  10:   e3530000        cmp     r3, #0  ; 0x0
  14:   1afffffd        bne     10 <hvc_dcc_put_chars+0x10>
  18:   e7d1000c        ldrb    r0, [r1, ip]
  1c:   ee10fe11        mrc     14, 0, pc, cr0, cr1, {0}
  20:   2afffffd        bcs     1c <hvc_dcc_put_chars+0x1c>
  24:   ee000e15        mcr     14, 0, r0, cr0, cr5, {0}
  28:   e28cc001        add     ip, ip, #1      ; 0x1
  2c:   e15c0002        cmp     ip, r2
  30:   bafffff6        blt     10 <hvc_dcc_put_chars+0x10>
  34:   e1a00002        mov     r0, r2
  38:   e12fff1e        bx      lr

As you can see, the value of the mrc is checked against
DCC_STATUS_TX (bit 29) and then stored in r3 for later use.
Marking the asm volatile produces the following:

00000000 <hvc_dcc_put_chars>:
   0:   e3a03000        mov     r3, #0  ; 0x0
   4:   ea000007        b       28 <hvc_dcc_put_chars+0x28>
   8:   ee100e11        mrc     14, 0, r0, cr0, cr1, {0}
   c:   e3100202        tst     r0, #536870912  ; 0x20000000
  10:   1afffffc        bne     8 <hvc_dcc_put_chars+0x8>
  14:   e7d10003        ldrb    r0, [r1, r3]
  18:   ee10fe11        mrc     14, 0, pc, cr0, cr1, {0}
  1c:   2afffffd        bcs     18 <hvc_dcc_put_chars+0x18>
  20:   ee000e15        mcr     14, 0, r0, cr0, cr5, {0}
  24:   e2833001        add     r3, r3, #1      ; 0x1
  28:   e1530002        cmp     r3, r2
  2c:   bafffff5        blt     8 <hvc_dcc_put_chars+0x8>
  30:   e1a00002        mov     r0, r2
  34:   e12fff1e        bx      lr

which looks better and actually works. Mark all the inline
assembly in this file as volatile since we don't want the
compiler to optimize away these statements or move them around
in any way.
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

PCH_DMA is not always enabled when a user uses PCH_UART.
Since overhead of DMA is not small, in case of low frequent
communication, without DMA is better.
Thus, "select PCH_DMA" and DMADEVICES are unnecessary
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Support ML7213 device of OKI SEMICONDUCTOR.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is completely compatible for Intel EG20T PCH.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

m68k_serial->tqueue_hangup is unused.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On some platforms, we need to restore the console speed on resume even
it was not suspended (no_console_suspend), and on others we don't have
to do that.

So don't care about the "console_suspend_enabled" and unconditionally
reset the console speed if it is a console.

This is actually a redo of ba15ab0e (Set proper console speed on resume
if console suspend is disabled) from Deepak Saxena.  I also tried to
investigate more to find out if this change will break others, here is
what I've found out:

commit 891b9dd1
Author: Jason Wang <jason77.wang@gmail.com>
    serial-core: restore termios settings when resume console ports

commit ca2e71aa
Author: Jason Wang <jason77.wang@gmail.com>
    serial-core: skip call set_termios/console_start when no_console_suspend

commit 4547be78
Author: Stanislav Brabec <sbrabec@suse.cz>
    serial-core: resume serial hardware with no_console_suspend

commit ba15ab0e
Author: Deepak Saxena <dsaxena@laptop.org>
    Set proper console speed on resume if console suspend is disabled

from ba15ab0e, we learned that, even if the console suspend is disabled
(when no_console_suspend is set), we may still need to "reset the port
to the state it was in before we suspended."

Then with 4547be78, this piece of code is removed.

And then Jason Wang added that back in ca2e71aa and 891b9dd1, to fix
some breakage on OMAP3EVM platform. From ca2e71aa we learned that the
"set_termios" things is actually needed by both console is suspended
and not suspended.

That's why I removed the console_suspended_enabled condition, and only
call console_start() when we actually suspeneded it.

I also noticed in this thread:
http://marc.info/?t=129079257100004&r=1&w=2, which talked about on
some platforms, UART HW will be cut power whether or not we set
no_console_suspend, and then on resume it does not work quite well. I
have a similar HW, and this patch fixed this issue, don't know if this
patch also works on their platforms.

[Update: Stanislav tested this patch on Zaurus and reported it improves the
situation. Thanks.]

CC: Greg KH <greg@kroah.com>
CC: Deepak Saxena <dsaxena@laptop.org>
CC: Jason Wang <jason77.wang@gmail.com>
CC: Stanislav Brabec <sbrabec@suse.cz>
CC: Daniel Drake <dsd@laptop.org>
Signed-off-by: NYin Kangkai <kangkai.yin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is used to store the spi_device ->modalias so they have to be the same
size.  SPI_NAME_SIZE is 32.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

flush_scheduled_work() is scheduled to be deprecated.  Explicitly sync
flush the used work items instead.  Note that before this change,
flush_scheduled_work() wouldn't have properly flushed tty->buf.work if
it were on timer.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

OMAP can do also dynamic idling so wake-up enable register should be set
also while system is running. If UART_OMAP_WER is not set, then for instance
the RX activity cannot wake up the UART port that is sleeping.

This RX wake-up feature was working when the 8250 driver was used instead
of omap-serial. Reason for this is that the 8250 doesn't set the
UART_OMAP_WER and then arch/arm/mach-omap2/pm34xx.c ends up saving and
restoring the reset default which is the same than value
OMAP_UART_WER_MOD_WKUP here.

Fix this by moving the conditional UART_OMAP_WER write from serial_omap_pm
into serial_omap_startup where wake-up bits are set unconditionally.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Cc: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Magic SysRq key is not working for OMAP on new serial
console ttyOx because SUPPORT_SYSRQ is not defined
for omap-serial.

This patch defines SUPPORT_SYSRQ in omap-serial and
enables handling of Magic SysRq character.

Further there is an issue of losing first break character.
Removing the reset of the lsr_break_flag fixes this issue.
Signed-off-by: NThomas Weber <weber@corscience.de>
Acked-by: NGovindraj.R <govindraj.raja@ti.com>
Tested-by: NManjunath G Kondaiah <manjugk@ti.com>
Acked-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some platform attributes (e.g. max_hz, use_dma) were being intuited
from the modem type. These things should be specified by the platform
data.

Added max_hz, use_dma to ifx_modem_platform_data definition,
replaced is_6160 w/ modem_type, and changed clients accordingly
Signed-off-by: NRuss Gorby <russ.gorby@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is kind of a revert for commit 669b7a09 "hsu: add a periodic
timer to check dma rx channel", which is a workaround for a bug in A0
stepping silicon, where a dma rx data timeout is missing for some case.
Since new silicon has fixed it and the old version is phasing out, no
need to carry on it any more.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

sport->port.irq is unsigned, check for <0 doesn't make sense.
Explicitly cast it to int to check for error.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: NFSv4 readdir loses entries
  NFS: Micro-optimize nfs4_decode_dirent()
  NFS: Fix an NFS client lockdep issue
  NFS construct consistent co_ownerid for v4.1
  NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount
  NFS improve pnfs_put_deviceid_cache debug print
  NFS fix cb_sequence error processing
  NFS do not find client in NFSv4 pg_authenticate
  NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!"
  NFS: Prevent memory allocation failure in nfsacl_encode()
  NFS: nfsacl_{encode,decode} should return signed integer
  NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"
  NFS: Fix "kernel BUG at fs/aio.c:554!"
  NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds().
  NFS: fix handling of malloc failure during nfs_flush_multi()

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: smp_on_up: allow non-ARM SMP processors
  ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
  ARM: initrd: disable initrd if passed address overlaps reserved region
  ARM: footbridge: fix debug macros
  ARM: mmci: round down the bytes transferred on error
  ARM: mmci: complete the transaction on error
  ARM: 6642/1: mmci: calculate remaining bytes at error correctly

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
  arm: omap2: mux: fix compile warning
  omap1: Simplify use of omap_irq_flags
  omap2+: Fix unused variable warning for omap_irq_base

Fix kernel-doc warning in kernel.h from commit 7ef88ad5
("BUILD_BUG_ON: make it handle more cases"):

  Warning(include/linux/kernel.h:605): No description found for parameter 'condition'
  Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: xfs_bmap_add_extent_delay_real should init br_startblock
  xfs: fix dquot shaker deadlock
  xfs: handle CIl transaction commit failures correctly
  xfs: limit extsize to size of AGs and/or MAXEXTLEN
  xfs: prevent extsize alignment from exceeding maximum extent size
  xfs: limit extent length for allocation to AG size
  xfs: speculative delayed allocation uses rounddown_power_of_2 badly
  xfs: fix efi item leak on forced shutdown
  xfs: fix log ticket leak on forced shutdown.