- 18 7月, 2017 25 次提交
-
-
由 David S. Miller 提交于
John Fastabend says: ==================== Implement XDP bpf_redirect This series adds two new XDP helper routines bpf_redirect() and bpf_redirect_map(). The first variant bpf_redirect() is meant to be used the same way it is currently being used by the cls_bpf classifier. An xdp packet will be redirected immediately when this is called. The other variant bpf_redirect_map(map, key, flags) uses a new map type called devmap. A devmap uses integers as keys and net_devices as values. The user provies key/ifindex pairs to update the map with new net_devices. This provides two benefits over the normal variant 'bpf_redirect()'. First the datapath bpf program is abstracted away from using hard-coded ifindex values. Allowing a single bpf program to be run any many different environments. Second, and perhaps more important, the map enables batching packet transmits. The map plus small driver changes allows for batching all send requests across a NAPI poll loop. This allows driver writers to optimize the driver xmit path and only call expensive operations once for a batch of xdp_buffs. The devmap was designed to support possible future work for multicast and broadcast as follow-up patches. To see, in more detail, how to leverage the new helpers and map from the userspace side please review these two patches, xdp: sample program for new bpf_redirect helper xdp: bpf redirect with map sample program Performance numbers provided by Jesper are the following, tested using the ixgbe driver with CPU E5-1650 v4 @ 3.60GHz: 13,939,674 pkt/s = XDP_DROP without touching memory 14,290,650 pkt/s = xdp1: XDP_DROP with reading packet data 13,221,812 pkt/s = xdp2: XDP_TX with swap mac (writes into pkt) 7,596,576 pkt/s = xdp_redirect: XDP_REDIRECT with swap mac (like XDP_TX) 13,058,435 pkt/s = xdp_redirect_map:XDP_REDIRECT with swap mac + devmap A big thanks to everyone who helped with this series. Jesper provided fixes, debugging, code review, performance benchmarks! Daniel provided lots of useful feedback and code review. And last but not least Andy provided useful feedback related to supporting additional drivers, generic xdp implementation, testing, etc. Any other feedback is welcome but I believe at this point these are ready to be merged! Whats left... get the rest of the drivers developers to implement this in all the drivers. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Tested-by: NAndy Gospodarek <andy@greyhouse.net> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
The BPF map devmap holds a refcnt on the net_device structure when it is in the map. We need to do this to ensure on driver unload we don't lose a dev reference. However, its not very convenient to have to manually unload the map when destroying a net device so add notifier handlers to do the cleanup automatically. But this creates a race between update/destroy BPF syscall and programs and the unregister netdev hook. Unfortunately, the best I could come up with is either to live with requiring manual removal of net devices from the map before removing the net device OR to add a mutex in devmap to ensure the map is not modified while we are removing a device. The fallout also requires that BPF programs no longer update/delete the map from the BPF program side because the mutex may sleep and this can not be done from inside an rcu critical section. This is not a real problem though because I have not come up with any use cases where this is actually useful in practice. If/when we come up with a compelling user for this we may need to revisit this. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
For performance reasons we want to avoid updating the tail pointer in the driver tx ring as much as possible. To accomplish this we add batching support to the redirect path in XDP. This adds another ndo op "xdp_flush" that is used to inform the driver that it should bump the tail pointer on the TX ring. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
BPF programs can use the devmap with a bpf_redirect_map() helper routine to forward packets to netdevice in map. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
Device map (devmap) is a BPF map, primarily useful for networking applications, that uses a key to lookup a reference to a netdevice. The map provides a clean way for BPF programs to build virtual port to physical port maps. Additionally, it provides a scoping function for the redirect action itself allowing multiple optimizations. Future patches will leverage the map to provide batching at the XDP layer. Another optimization/feature, that is not yet implemented, would be to support multiple netdevices per key to support efficient multicast and broadcast support. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
This adds a trace event for xdp redirect which may help when debugging XDP programs that use redirect bpf commands. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
There are optimizations we can add after the basic feature is enabled. But, for now keep the patch simple. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
Add support for redirect to xdp generic creating a fall back for devices that do not yet have support and allowing test infrastructure using veth pairs to be built. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Tested-by: NAndy Gospodarek <andy@greyhouse.net> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
This implements a sample program for testing bpf_redirect. It reports the number of packets redirected per second and as input takes the ifindex of the device to run the xdp program on and the ifindex of the interface to redirect packets to. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Tested-by: NAndy Gospodarek <andy@greyhouse.net> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
This adds support for a bpf_redirect helper function to the XDP infrastructure. For now this only supports redirecting to the egress path of a port. In order to support drivers handling a xdp_buff natively this patches uses a new ndo operation ndo_xdp_xmit() that takes pushes a xdp_buff to the specified device. If the program specifies either (a) an unknown device or (b) a device that does not support the operation a BPF warning is thrown and the XDP_ABORTED error code is returned. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
XDP generic allows users to test XDP programs and/or run them with degraded performance on devices that do not yet support XDP. For testing I typically test eBPF programs using a set of veth devices. This allows testing topologies that would otherwise be difficult to setup especially in the early stages of development. This patch adds a xdp generic hook to the netif_rx_internal() function which is called from dev_forward_skb(). With this addition attaching XDP programs to veth devices works as expected! Also I noticed multiple drivers using netif_rx(). These devices will also benefit and generic XDP will work for them as well. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Tested-by: NAndy Gospodarek <andy@greyhouse.net> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
tx_rings and rx_rings are cleaned up on close paths in ixgbe driver however, xdp_rings are not. Set the xdp_rings to NULL here so that we can use the pointer to indicate if the XDP rings are initialized. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== mlxsw: Traps enhancements Ido says: The first patch makes sure the driver marks packets that were trapped in the router and might have already been flooded by the bridge, so that the bridge driver won't flood them again. This isn't critical at this time point, but will be when Neighbour Discovery traps are introduced as these are multicast packets that are trapped in the router. The second and third patches add new traps - for MLD and Router Alert packets. The last patch takes advantage of that and floods IPv6 unregistered multicast packets only to mrouter ports instead of all ports. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arkadi Sharshevsky 提交于
Up until now IPv6 unregistered multicast traffic would be flooded like broadcast, even when MLD snooping was enabled on the bridge. This was intentional as MLD packet traps were missing, preventing the bridge driver from programming MDB entries to the device. Previous patch added these traps, so we can now finally flood IPv6 unregistered multicast packets to specific ports via the multicast table instead of flooding them to all ports via the broadcast table. Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arkadi Sharshevsky 提交于
Add support for IPv6 MLDv1/2 packet trapping. Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
In case local sockets have the IP_ROUTER_ALERT socket option set, then they expect to get packets with the Router Alert option. Trap such packets, so that the kernel could inspect them and potentially send them to interested sockets. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
In commit 1c6c6d22 ("mlxsw: spectrum: Mirror certain packets to CPU") we marked packets that were mirrored to the CPU, so that they won't be flooded again by the bridge driver. However, certain packets are trapped in the device's router block, after passing through the bridge block where they were potentially flooded. Mark all packets coming from L3 traps, so that they won't be potentially flooded again by the bridge driver. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== mlxsw: offloading matches on ip ttl and tos Or says: Support offloading matches on ip ttl and tos ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Support offloading rules that match on ip tos. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Add ecn and dscp fields to the ipv4 acl block. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Define new element for ip tos (ecn, dscp) and place it into scratch area. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Support offloading rules that match on ip ttl. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Add ttl field to the ipv4 acl block. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Define new element for ip ttl and place it into scratch area. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2017 15 次提交
-
-
由 Eric Dumazet 提交于
As discussed in Faro during Netfilter Workshop 2017, RB trees can be used with RCU, using a seqlock. Note that net/rxrpc/conn_service.c is already using this. This patch converts inetpeer from AVL tree to RB tree, since it allows to remove private AVL implementation in favor of shared RB code. $ size net/ipv4/inetpeer.before net/ipv4/inetpeer.after text data bss dec hex filename 3195 40 128 3363 d23 net/ipv4/inetpeer.before 1562 24 0 1586 632 net/ipv4/inetpeer.after The same technique can be used to speed up net/netfilter/nft_set_rbtree.c (removing rwlock contention in fast path) Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Herrmann 提交于
All unix sockets now account inflight FDs to the respective sender. This was introduced in: commit 712f4aad Author: willy tarreau <w@1wt.eu> Date: Sun Jan 10 07:54:56 2016 +0100 unix: properly account for FDs passed over unix sockets and further refined in: commit 415e3d3e Author: Hannes Frederic Sowa <hannes@stressinduktion.org> Date: Wed Feb 3 02:11:03 2016 +0100 unix: correctly track in-flight fds in sending process user_struct Hence, regardless of the stacking depth of FDs, the total number of inflight FDs is limited, and accounted. There is no known way for a local user to exceed those limits or exploit the accounting. Furthermore, the GC logic is independent of the recursion/stacking depth as well. It solely depends on the total number of inflight FDs, regardless of their layout. Lastly, the current `recursion_level' suffers a TOCTOU race, since it checks and inherits depths only at queue time. If we consider `A<-B' to mean `queue-B-on-A', the following sequence circumvents the recursion level easily: A<-B B<-C C<-D ... Y<-Z resulting in: A<-B<-C<-...<-Z With all of this in mind, lets drop the recursion limit. It has no additional security value, anymore. On the contrary, it randomly confuses message brokers that try to forward file-descriptors, since any sendmsg(2) call can fail spuriously with ETOOMANYREFS if a client maliciously modifies the FD while inflight. Cc: Alban Crequy <alban.crequy@collabora.co.uk> Cc: Simon McVittie <simon.mcvittie@collabora.co.uk> Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NTom Gundersen <teg@jklm.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 linzhang 提交于
In the pull_pages code block, if the first frag size > eat, we can end the loop in advance to avoid extra copy. Signed-off-by: NLin Zhang <xiaolou4617@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Biju Das 提交于
Add a new compatible string for the RZ/G1M (R8A7743) SoC. Signed-off-by: NBiju Das <biju.das@bp.renesas.com> Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alvaro G. M 提交于
Keep supporting proprietary "xlnx,phy-type" attribute and add support for MII connectivity to the PHY. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NAlvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Xin Long says: ==================== sctp: remove typedefs from structures part 2 As we know, typedef is suggested not to use in kernel, even checkpatch.pl also gives warnings about it. Now sctp is using it for many structures. All this kind of typedef's using should be removed. This patchset is the part 2 to remove it for another 11 basic structures. Just as the part 1, No any code's logic would be changed in these patches, only cleaning up. Note that v1->v2, nothing changed, just because net-next were closed when posting v1. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_hmac_algo_param_t, and replace with struct sctp_hmac_algo_param in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_chunks_param_t, and replace with struct sctp_chunks_param in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_random_param_t, and replace with struct sctp_random_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_supported_ext_param_t, and replace with struct sctp_supported_ext_param in the places where it's using this typedef. It is also to use sizeof(variable) instead of sizeof(type). Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_adaptation_ind_param_t, and replace with struct sctp_adaptation_ind_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Remove it, there is even no places using it. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_supported_addrs_param_t, and replace with struct sctp_supported_addrs_param in the places where it's using this typedef. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Remove this typedef, there is even no places using it. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to remove the typedef sctp_cookie_preserve_param_t, and replace with struct sctp_cookie_preserve_param in the places where it's using this typedef. It is also to fix some indents in sctp_sf_do_5_2_6_stale(). Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-