clang does not support variable length array for structure member.
It has the following error during compilation:

kernel/trace/trace_syscalls.c:568:17: error: fields must have a constant size:
'variable length array in structure' extension will never be supported
                unsigned long args[sys_data->nb_args];
                              ^

The fix is to use a fixed array length instead.
Reported-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit cbf5ecb3 ("net: bonding: Fix transmit load balancing in
balance-alb mode") tried to fix transmit dynamic load balancing in
balance-alb mode, which wasn't working after commit 8b426dc5
("bonding: remove hardcoded value").

It turned out that my previous patch only fixed the case when
balance-alb was specified as bonding module parameter, and not when
balance-alb mode was set using /sys/class/net/*/bonding/mode (the most
common usage).  In the latter case, tlb_dynamic_lb was set up according
to the default mode of the bonding interface, which happens to be
balance-rr.

This additional patch addresses this issue by setting up tlb_dynamic_lb
to 1 if "mode" is set to balance-alb through the sysfs interface.

I didn't add code to change tlb_balance_lb back to the default value for
other modes, because "mode" is usually set up only once during
initialization, and it's not worthwhile to change the static variable
bonding_defaults in bond_main.c to a global variable just for this
purpose.

Commit 8b426dc5 also changes the value of tlb_dynamic_lb for
balance-tlb mode if it is set up using the sysfs interface.  I didn't
change that behavior, because the value of tlb_balance_lb can be changed
using the sysfs interface for balance-tlb, and I didn't like changing
the default value back and forth for balance-tlb.

As for balance-alb, /sys/class/net/*/bonding/tlb_balance_lb cannot be
written to.  However, I think balance-alb with tlb_dynamic_lb set to 0
is not an intended usage, so there is little use making it writable at
this moment.

Fixes: 8b426dc5 ("bonding: remove hardcoded value")
Reported-by: NReinis Rozitis <r@roze.lv>
Signed-off-by: NKosuke Tatsukawa <tatsu@ab.jp.nec.com>
Cc: stable@vger.kernel.org  # v4.12+
Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: NMahesh Bandewar <maheshb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only need to wakeup the initiator after all sub-channels
are opened.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a virtual device is added dynamically (via host console), then
the vmbus sends an offer message for the primary channel. The processing
of this message for networking causes the network device to then
initialize the sub channels.

The problem is that setting up the sub channels needs to wait until
the subsequent subchannel offers have been processed. These offers
come in on the same ring buffer and work queue as where the primary
offer is being processed; leading to a deadlock.

This did not happen in older kernels, because the sub channel waiting
logic was broken (it wasn't really waiting).

The solution is to do the sub channel setup in its own work queue
context that is scheduled by the primary channel setup; and then
happens later.

Fixes: 732e4985 ("netvsc: fix race on sub channel creation")
Reported-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code does not handle correctly the access to the upper page
in case of SFP/SFP+ EEPROM. In that case the offset should be local
and the I2C address should be changed.

Fixes: 2ea10903 ("mlxsw: spectrum: Add support for access cable info via ethtool")
Reported-by: NFlorian Klink <flokli@flokli.de>
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a typo here so we accidentally free "skb" instead of "skbn".
It leads to a double free and a leak.  After discussing with Subash,
it's better to just move the check before the allocation and avoid the
need to free.

Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull nfsd updates from Bruce Fields:
 "More RDMA work and some op-structure constification from Chuck Lever,
  and a small cleanup to our xdr encoding"

* tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux:
  svcrdma: Estimate Send Queue depth properly
  rdma core: Add rdma_rw_mr_payload()
  svcrdma: Limit RQ depth
  svcrdma: Populate tail iovec when receiving
  nfsd: Incoming xdr_bufs may have content in tail buffer
  svcrdma: Clean up svc_rdma_build_read_chunk()
  sunrpc: Const-ify struct sv_serv_ops
  nfsd: Const-ify NFSv4 encoding and decoding ops arrays
  sunrpc: Const-ify instances of struct svc_xprt_ops
  nfsd4: individual encoders no longer see error cases
  nfsd4: skip encoder in trivial error cases
  nfsd4: define ->op_release for compound ops
  nfsd4: opdesc will be useful outside nfs4proc.c
  nfsd4: move some nfsd4 op definitions to xdr4.h

Pull btrfs updates from David Sterba:
 "The changes range through all types: cleanups, core chagnes, sanity
  checks, fixes, other user visible changes, detailed list below:

   - deprecated: user transaction ioctl

   - mount option ssd does not change allocation alignments

   - degraded read-write mount is allowed if all the raid profile
     constraints are met, now based on more accurate check

   - defrag: do not reset compression afterwards; the NOCOMPRESS flag
     can be now overriden by defrag

   - prep work for better extent reference tracking (related to the
     qgroup slowness with balance)

   - prep work for compression heuristics

   - memory allocation reductions (may help latencies on a loaded
     system)

   - better accounting for io waiting states

   - error handling improvements (removed BUGs)

   - added more sanity checks for shared refs

   - fix readdir vs pagefault deadlock under some circumstances

   - fix for 'no-hole' mode, certain combination of compressed and
     inline extents

   - send: fix emission of invalid clone operations

   - fixup file mode if setting acls fail

   - more fixes from fuzzing

   - oher cleanups"

* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (104 commits)
  btrfs: submit superblock io with REQ_META and REQ_PRIO
  btrfs: remove unnecessary memory barrier in btrfs_direct_IO
  btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extent
  btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extent
  btrfs: pass fs_info to btrfs_del_root instead of tree_root
  Btrfs: add one more sanity check for shared ref type
  Btrfs: remove BUG_ON in __add_tree_block
  Btrfs: remove BUG() in add_data_reference
  Btrfs: remove BUG() in print_extent_item
  Btrfs: remove BUG() in btrfs_extent_inline_ref_size
  Btrfs: convert to use btrfs_get_extent_inline_ref_type
  Btrfs: add a helper to retrive extent inline ref type
  btrfs: scrub: simplify scrub worker initialization
  btrfs: scrub: clean up division in scrub_find_csum
  btrfs: scrub: clean up division in __scrub_mark_bitmap
  btrfs: scrub: use bool for flush_all_writes
  btrfs: preserve i_mode if __btrfs_set_acl() fails
  btrfs: Remove extraneous chunk_objectid variable
  btrfs: Remove chunk_objectid argument from btrfs_make_block_group
  btrfs: Remove extra parentheses from condition in copy_items()
  ...

Pull followup block layer updates from Jens Axboe:
 "I ended up splitting the main pull request for this series into two,
  mainly because of clashes between NVMe fixes that went into 4.13 after
  the for-4.14 branches were split off. This pull request is mostly
  NVMe, but not exclusively. In detail, it contains:

   - Two pull request for NVMe changes from Christoph. Nothing new on
     the feature front, basically just fixes all over the map for the
     core bits, transport, rdma, etc.

   - Series from Bart, cleaning up various bits in the BFQ scheduler.

   - Series of bcache fixes, which has been lingering for a release or
     two. Coly sent this in, but patches from various people in this
     area.

   - Set of patches for BFQ from Paolo himself, updating both
     documentation and fixing some corner cases in performance.

   - Series from Omar, attempting to now get the 4k loop support
     correct. Our confidence level is higher this time.

   - Series from Shaohua for loop as well, improving O_DIRECT
     performance and fixing a use-after-free"

* 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block: (74 commits)
  bcache: initialize dirty stripes in flash_dev_run()
  loop: set physical block size to logical block size
  bcache: fix bch_hprint crash and improve output
  bcache: Update continue_at() documentation
  bcache: silence static checker warning
  bcache: fix for gc and write-back race
  bcache: increase the number of open buckets
  bcache: Correct return value for sysfs attach errors
  bcache: correct cache_dirty_target in __update_writeback_rate()
  bcache: gc does not work when triggering by manual command
  bcache: Don't reinvent the wheel but use existing llist API
  bcache: do not subtract sectors_to_gc for bypassed IO
  bcache: fix sequential large write IO bypass
  bcache: Fix leak of bdev reference
  block/loop: remove unused field
  block/loop: fix use after free
  bfq: Use icq_to_bic() consistently
  bfq: Suppress compiler warnings about comparisons
  bfq: Check kstrtoul() return value
  bfq: Declare local functions static
  ...

Pull networking fixes from David Miller:
 "The iwlwifi firmware compat fix is in here as well as some other
  stuff:

  1) Fix request socket leak introduced by BPF deadlock fix, from Eric
     Dumazet.

  2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg.

  3) Missing __qdisc_drop conversions in prio and qfq schedulers, from
     Gao Feng.

  4) Use after free in netlink nlk groups handling, from Xin Long.

  5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long.

  6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca
     with follow-on fix from Eric Dumazet.

  7) Need RCU and preemption disabled during generic XDP data patch,
     from John Fastabend"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
  bpf: make error reporting in bpf_warn_invalid_xdp_action more clear
  Revert "mdio_bus: Remove unneeded gpiod NULL check"
  bpf: devmap, use cond_resched instead of cpu_relax
  bpf: add support for sockmap detach programs
  net: rcu lock and preempt disable missing around generic xdp
  bpf: don't select potentially stale ri->map from buggy xdp progs
  net: tulip: Constify tulip_tbl
  net: ethernet: ti: netcp_core: no need in netif_napi_del
  davicom: Display proper debug level up to 6
  net: phy: sfp: rename dt properties to match the binding
  dt-binding: net: sfp binding documentation
  dt-bindings: add SFF vendor prefix
  dt-bindings: net: don't confuse with generic PHY property
  ip6_tunnel: fix setting hop_limit value for ipv6 tunnel
  ip_tunnel: fix setting ttl and tos value in collect_md mode
  ipv6: fix typo in fib6_net_exit()
  tcp: fix a request socket leak
  sctp: fix missing wake ups in some situations
  netfilter: xt_hashlimit: fix build error caused by 64bit division
  netfilter: xt_hashlimit: alloc hashtable with right size
  ...

Merge more updates from Andrew Morton:

 - most of the rest of MM

 - a small number of misc things

 - lib/ updates

 - checkpatch

 - autofs updates

 - ipc/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
  ipc: optimize semget/shmget/msgget for lots of keys
  ipc/sem: play nicer with large nsops allocations
  ipc/sem: drop sem_checkid helper
  ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
  ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
  ipc: convert ipc_namespace.count from atomic_t to refcount_t
  kcov: support compat processes
  sh: defconfig: cleanup from old Kconfig options
  mn10300: defconfig: cleanup from old Kconfig options
  m32r: defconfig: cleanup from old Kconfig options
  drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
  drivers/pps: aesthetic tweaks to PPS-related content
  cpumask: make cpumask_next() out-of-line
  kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
  kmod: split off umh headers into its own file
  MAINTAINERS: clarify kmod is just a kernel module loader
  kmod: split out umh code into its own file
  test_kmod: flip INT checks to be consistent
  test_kmod: remove paranoid UINT_MAX check on uint range processing
  vfat: deduplicate hex2bin()
  ...

I removed all the gperf use, but not the Makefile rules.  Sam Ravnborg
says I get bonus points for cleaning this up.  I'll hold him to it.
Requested-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Differ between illegal XDP action code and just driver
unsupported one to provide better feedback when we throw
a one-time warning here. Reason is that with 814abfab
("xdp: add bpf_redirect helper function") not all drivers
support the new XDP return code yet and thus they will
fall into their 'default' case when checking for return
codes after program return, which then triggers a
bpf_warn_invalid_xdp_action() stating that the return
code is illegal, but from XDP perspective it's not.

I decided not to place something like a XDP_ACT_MAX define
into uapi i) given we don't have this either for all other
program types, ii) future action codes could have further
encoding there, which would render such define unsuitable
and we wouldn't be able to rip it out again, and iii) we
rarely add new action codes.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 95b80bf3 ("mdio_bus:
Remove unneeded gpiod NULL check"), this commit assumed that GPIOLIB
checks for NULL descriptors, so it's safe to drop them, but it is not
when CONFIG_GPIOLIB is disabled in the kernel. If we do call
gpiod_set_value_cansleep() on a GPIO descriptor we will issue warnings
coming from the inline stubs declared in include/linux/gpio/consumer.h.

Fixes: 95b80bf3 ("mdio_bus: Remove unneeded gpiod NULL check")
Reported-by: NWoojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John Fastabend says:

====================
net: Fixes for XDP/BPF

The following fixes, UAPI updates, and small improvement,

i. XDP needs to be called inside RCU with preempt disabled.

ii. Not strictly a bug fix but we have an attach command in the
sockmap UAPI already to avoid having a single kernel released with
only the attach and not the detach I'm pushing this into net branch.
Its early in the RC cycle so I think this is OK (not ideal but better
than supporting a UAPI with a missing detach forever).

iii. Final patch replace cpu_relax with cond_resched in devmap.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Be a bit more friendly about waiting for flush bits to complete.
Replace the cpu_relax() with a cond_resched().
Suggested-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bpf map sockmap supports adding programs via attach commands. This
patch adds the detach command to keep the API symmetric and allow
users to remove previously added programs. Otherwise the user would
have to delete the map and re-add it to get in this state.

This also adds a series of additional tests to capture detach operation
and also attaching/detaching invalid prog types.

API note: socks will run (or not run) programs depending on the state
of the map at the time the sock is added. We do not for example walk
the map and remove programs from previously attached socks.
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

do_xdp_generic must be called inside rcu critical section with preempt
disabled to ensure BPF programs are valid and per-cpu variables used
for redirect operations are consistent. This patch ensures this is true
and fixes the splat below.

The netif_receive_skb_internal() code path is now broken into two rcu
critical sections. I decided it was better to limit the preempt_enable/disable
block to just the xdp static key portion and the fallout is more
rcu_read_lock/unlock calls. Seems like the best option to me.

[  607.596901] =============================
[  607.596906] WARNING: suspicious RCU usage
[  607.596912] 4.13.0-rc4+ #570 Not tainted
[  607.596917] -----------------------------
[  607.596923] net/core/dev.c:3948 suspicious rcu_dereference_check() usage!
[  607.596927]
[  607.596927] other info that might help us debug this:
[  607.596927]
[  607.596933]
[  607.596933] rcu_scheduler_active = 2, debug_locks = 1
[  607.596938] 2 locks held by pool/14624:
[  607.596943]  #0:  (rcu_read_lock_bh){......}, at: [<ffffffff95445ffd>] ip_finish_output2+0x14d/0x890
[  607.596973]  #1:  (rcu_read_lock_bh){......}, at: [<ffffffff953c8e3a>] __dev_queue_xmit+0x14a/0xfd0
[  607.597000]
[  607.597000] stack backtrace:
[  607.597006] CPU: 5 PID: 14624 Comm: pool Not tainted 4.13.0-rc4+ #570
[  607.597011] Hardware name: Dell Inc. Precision Tower 5810/0HHV7N, BIOS A17 03/01/2017
[  607.597016] Call Trace:
[  607.597027]  dump_stack+0x67/0x92
[  607.597040]  lockdep_rcu_suspicious+0xdd/0x110
[  607.597054]  do_xdp_generic+0x313/0xa50
[  607.597068]  ? time_hardirqs_on+0x5b/0x150
[  607.597076]  ? mark_held_locks+0x6b/0xc0
[  607.597088]  ? netdev_pick_tx+0x150/0x150
[  607.597117]  netif_rx_internal+0x205/0x3f0
[  607.597127]  ? do_xdp_generic+0xa50/0xa50
[  607.597144]  ? lock_downgrade+0x2b0/0x2b0
[  607.597158]  ? __lock_is_held+0x93/0x100
[  607.597187]  netif_rx+0x119/0x190
[  607.597202]  loopback_xmit+0xfd/0x1b0
[  607.597214]  dev_hard_start_xmit+0x127/0x4e0

Fixes: d4455169 ("net: xdp: support xdp generic on virtual devices")
Fixes: b5cdae32 ("net: Generic XDP")
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can potentially run into a couple of issues with the XDP
bpf_redirect_map() helper. The ri->map in the per CPU storage
can become stale in several ways, mostly due to misuse, where
we can then trigger a use after free on the map:

i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT
and running on a driver not supporting XDP_REDIRECT yet. The
ri->map on that CPU becomes stale when the XDP program is unloaded
on the driver, and a prog B loaded on a different driver which
supports XDP_REDIRECT return code. prog B would have to omit
calling to bpf_redirect_map() and just return XDP_REDIRECT, which
would then access the freed map in xdp_do_redirect() since not
cleared for that CPU.

ii) prog A is calling bpf_redirect_map(), returning a code other
than XDP_REDIRECT. prog A is then detached, which triggers release
of the map. prog B is attached which, similarly as in i), would
just return XDP_REDIRECT without having called bpf_redirect_map()
and thus be accessing the freed map in xdp_do_redirect() since
not cleared for that CPU.

iii) prog A is attached to generic XDP, calling the bpf_redirect_map()
helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is
currently not handling ri->map (will be fixed by Jesper), so it's
not being reset. Later loading a e.g. native prog B which would,
say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would
find in xdp_do_redirect() that a map was set and uses that causing
use after free on map access.

Fix thus needs to avoid accessing stale ri->map pointers, naive
way would be to call a BPF function from drivers that just resets
it to NULL for all XDP return codes but XDP_REDIRECT and including
XDP_REDIRECT for drivers not supporting it yet (and let ri->map
being handled in xdp_do_generic_redirect()). There is a less
intrusive way w/o letting drivers call a reset for each BPF run.

The verifier knows we're calling into bpf_xdp_redirect_map()
helper, so it can do a small insn rewrite transparent to the prog
itself in the sense that it fills R4 with a pointer to the own
bpf_prog. We have that pointer at verification time anyway and
R4 is allowed to be used as per calling convention we scratch
R0 to R5 anyway, so they become inaccessible and program cannot
read them prior to a write. Then, the helper would store the prog
pointer in the current CPUs struct redirect_info. Later in
xdp_do_*_redirect() we check whether the redirect_info's prog
pointer is the same as passed xdp_prog pointer, and if that's
the case then all good, since the prog holds a ref on the map
anyway, so it is always valid at that point in time and must
have a reference count of at least 1. If in the unlikely case
they are not equal, it means we got a stale pointer, so we clear
and bail out right there. Also do reset map and the owning prog
in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and
bpf_xdp_redirect() won't get mixed up, only the last call should
take precedence. A tc bpf_redirect() doesn't use map anywhere
yet, so no need to clear it there since never accessed in that
layer.

Note that in case the prog is released, and thus the map as
well we're still under RCU read critical section at that time
and have preemption disabled as well. Once we commit with the
__dev_map_insert_ctx() from xdp_do_redirect_map() and set the
map to ri->map_to_flush, we still wait for a xdp_do_flush_map()
to finish in devmap dismantle time once flush_needed bit is set,
so that is fine.

Fixes: 97f91a7c ("bpf: add bpf_redirect_map helper routine")
Reported-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It looks like all users of tulip_tbl are reads, so mark this table
as read-only.

$ git grep tulip_tbl  # edited to avoid line-wraps...
interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ...
interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ...
interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ...
interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt,
pnic.c:      iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
tulip.h:     extern struct tulip_chip_table tulip_tbl[];
tulip_core.c:struct tulip_chip_table tulip_tbl[] = {
tulip_core.c:iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5);
tulip_core.c:iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
tulip_core.c:setup_timer(&tp->timer, tulip_tbl[tp->chip_id].media_timer,
tulip_core.c:const char *chip_name = tulip_tbl[chip_idx].chip_name;
tulip_core.c:if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size)
tulip_core.c:ioaddr =  pci_iomap(..., tulip_tbl[chip_idx].io_size);
tulip_core.c:tp->flags = tulip_tbl[chip_idx].flags;
tulip_core.c:setup_timer(&tp->timer, tulip_tbl[tp->chip_id].media_timer,
tulip_core.c:INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task);

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: netdev@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't remove rx_napi specifically just before free_netdev(),
it's supposed to be done in it and is confusing w/o tx_napi deletion.
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This will make it explicit some messages are of the form:
dm9000_dbg(db, 5, ...
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the Rx rate select control gpio property name match the documented
binding. This would make the addition of 'rate-select1-gpios' for SFP+
support more natural.

Also, make the MOD-DEF0 gpio property name match the documentation.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add device-tree binding documentation SFP transceivers. Support for SFP
transceivers has been recently introduced (drivers/net/phy/sfp.c).
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This complements commit 9a94b3a4 (dt-binding: phy: don't confuse with
Ethernet phy properties).

The generic PHY 'phys' property sometime appears in the same node with
the Ethernet PHY 'phy' or 'phy-handle' properties. Add a warning in
ethernet.txt to reduce confusion.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to vxlan/geneve tunnel, if hop_limit is zero, it should fall
back to ip6_dst_hoplimt().
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ttl and tos variables are declared and assigned, but are not used in
iptunnel_xmit() function.

Fixes: cfc7381b ("ip_tunnel: add collect_md mode to IPIP tunnel")
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipc_findkey() used to scan all objects to look for the wanted key.  This
is slow when using a high number of keys.  This change adds an rhashtable
of kern_ipc_perm objects in ipc_ids, so that one lookup cease to be O(n).

This change gives a 865% improvement of benchmark reaim.jobs_per_min on a
56 threads Intel(R) Xeon(R) CPU E5-2695 v3 @ 2.30GHz with 256G memory [1]

Other (more micro) benchmark results, by the author: On an i5 laptop, the
following loop executed right after a reboot took, without and with this
change:

    for (int i = 0, k=0x424242; i < KEYS; ++i)
        semget(k++, 1, IPC_CREAT | 0600);

                 total       total          max single  max single
   KEYS        without        with        call without   call with

      1            3.5         4.9   µs            3.5         4.9
     10            7.6         8.6   µs            3.7         4.7
     32           16.2        15.9   µs            4.3         5.3
    100           72.9        41.8   µs            3.7         4.7
   1000        5,630.0       502.0   µs             *           *
  10000    1,340,000.0     7,240.0   µs             *           *
  31900   17,600,000.0    22,200.0   µs             *           *

 *: unreliable measure: high variance

The duration for a lookup-only usage was obtained by the same loop once
the keys are present:

                 total       total          max single  max single
   KEYS        without        with        call without   call with

      1            2.1         2.5   µs            2.1         2.5
     10            4.5         4.8   µs            2.2         2.3
     32           13.0        10.8   µs            2.3         2.8
    100           82.9        25.1   µs             *          2.3
   1000        5,780.0       217.0   µs             *           *
  10000    1,470,000.0     2,520.0   µs             *           *
  31900   17,400,000.0     7,810.0   µs             *           *

Finally, executing each semget() in a new process gave, when still
summing only the durations of these syscalls:

creation:
                 total       total
   KEYS        without        with

      1            3.7         5.0   µs
     10           32.9        36.7   µs
     32          125.0       109.0   µs
    100          523.0       353.0   µs
   1000       20,300.0     3,280.0   µs
  10000    2,470,000.0    46,700.0   µs
  31900   27,800,000.0   219,000.0   µs

lookup-only:
                 total       total
   KEYS        without        with

      1            2.5         2.7   µs
     10           25.4        24.4   µs
     32          106.0        72.6   µs
    100          591.0       352.0   µs
   1000       22,400.0     2,250.0   µs
  10000    2,510,000.0    25,700.0   µs
  31900   28,200,000.0   115,000.0   µs

[1] http://lkml.kernel.org/r/20170814060507.GE23258@yexl-desktop

Link: http://lkml.kernel.org/r/20170815194954.ck32ta2z35yuzpwp@debixSigned-off-by: NGuillaume Knispel <guillaume.knispel@supersonicimagine.com>
Reviewed-by: NMarc Pardo <marc.pardo@supersonicimagine.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Guillaume Knispel <guillaume.knispel@supersonicimagine.com>
Cc: Marc Pardo <marc.pardo@supersonicimagine.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replacing semop()'s kmalloc for kvmalloc was originally proposed by
Manfred on the premise that it can be called for large (than order-1)
sizes.  For example, while Oracle recommends setting SEMOPM to a _minimum_
of 100, some distros[1] encourage the setting to be a factor of the amount
of db tasks (PROCESSES), which can get fishy for large systems (easily
going beyond 1000).

[1] An Example of Semaphore Settings
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/5/html/Tuning_and_Optimizing_Red_Hat_Enterprise_Linux_for_Oracle_9i_and_10g_Databases/sect-Oracle_9i_and_10g_Tuning_Guide-Setting_Semaphores-An_Example_of_Semaphore_Settings.html

So let's just convert this to kvmalloc, just like the rest of the
allocations we do in ipc.  While the fallback vmalloc obviously involves
more overhead, this by far the uncommon path, and it's better for the user
than just erroring out with kmalloc.

Link: http://lkml.kernel.org/r/20170803184136.13855-2-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

... 'tis not used.

Link: http://lkml.kernel.org/r/20170803184136.13855-1-dave@stgolabs.netSigned-off-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.  This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.

Link: http://lkml.kernel.org/r/1499417992-3238-4-git-send-email-elena.reshetova@intel.comSigned-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <arozansk@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.  This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.

Link: http://lkml.kernel.org/r/1499417992-3238-3-git-send-email-elena.reshetova@intel.comSigned-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <arozansk@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.  This allows to avoid
accidental refcounter overflows that might lead to use-after-free
situations.

Link: http://lkml.kernel.org/r/1499417992-3238-2-git-send-email-elena.reshetova@intel.comSigned-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <arozansk@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Support compat processes in KCOV by providing compat_ioctl callback.
Compat mode uses the same ioctl callback: we have 2 commands that do not
use the argument and 1 that already checks that the arg does not overflow
INT_MAX.  This allows to use KCOV-guided fuzzing in compat processes.

Link: http://lkml.kernel.org/r/20170823100553.55812-1-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: <syzkaller@googlegroups.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove old, dead Kconfig options (in order appearing in this commit):
 - EXPERIMENTAL is gone since v3.9;
 - INET_LRO: commit 7bbf3cae ("ipv4: Remove inet_lro library");
 - MTD_CONCAT: commit f53fdebc ("mtd: drop MTD_CONCAT from Kconfig
   entirely");
 - MTD_PARTITIONS: commit 6a8a98b2 ("mtd: kill
   CONFIG_MTD_PARTITIONS");
 - MTD_CHAR: commit 660685d9 ("mtd: merge mtdchar module with
   mtdcore");
 - NETDEV_1000 and NETDEV_10000: commit f860b052 ("drivers/net:
   Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with
   just ETHERNET but that is separate change;
 - HID_SUPPORT: commit 1f41a6a9 ("HID: Fix the generic Kconfig
   options");
 - RCU_CPU_STALL_DETECTOR: commit a00e0d71 ("rcu: Remove conditional
   compilation for RCU CPU stall warnings");
 - SYSCTL_SYSCALL_CHECK: commit 7c60c48f ("sysctl: Improve the
   sysctl sanity checks");
 - VIDEO_OUTPUT_CONTROL: commit f167a64e ("video / output: Drop
   display output class support");
 - MISC_DEVICES: commit 7c5763b8 ("drivers: misc: Remove
   MISC_DEVICES config option");
 - AUTOFS_FS: commit 561c5cf9 ("staging: Remove autofs3");
 - IP_NF_QUEUE: commit 3dd6664f ("netfilter: remove unused "config
   IP_NF_QUEUE"");
 - USB_DEVICE_CLASS: commit 007bab91 ("USB: remove
   CONFIG_USB_DEVICE_CLASS");
 - USB_LIBUSUAL: commit f61870ee ("usb: remove libusual");
 - DISPLAY_SUPPORT: commit 5a6b5e02 ("fbdev: remove display
   subsystem");
 - IP_NF_TARGET_ULOG: commit d4da843e ("netfilter: kill remnants of
   ulog targets");
 - IP6_NF_QUEUE: commit d16cf20e ("netfilter: remove ip_queue
   support");
 - IP6_NF_TARGET_LOG: commit 6939c33a ("netfilter: merge ipt_LOG and
   ip6_LOG into xt_LOG");

Link: http://lkml.kernel.org/r/1500526846-4072-1-git-send-email-krzk@kernel.orgSigned-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove old, dead Kconfig options (in order appearing in this commit):
 - EXPERIMENTAL is gone since v3.9;
 - INET_LRO: commit 7bbf3cae ("ipv4: Remove inet_lro library");
 - MTD_PARTITIONS: commit 6a8a98b2 ("mtd: kill
   CONFIG_MTD_PARTITIONS");
 - MTD_CHAR: commit 660685d9 ("mtd: merge mtdchar module with
   mtdcore");
 - NETDEV_1000 and NETDEV_10000: commit f860b052 ("drivers/net:
   Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with
   just ETHERNET but that is separate change;
 - HID_SUPPORT: commit 1f41a6a9 ("HID: Fix the generic Kconfig
   options");
 - RCU_CPU_STALL_DETECTOR: commit a00e0d71 ("rcu: Remove conditional
   compilation for RCU CPU stall warnings");

Link: http://lkml.kernel.org/r/1500526786-3789-1-git-send-email-krzk@kernel.orgSigned-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove old, dead Kconfig options (in order appearing in this commit):
 - EXPERIMENTAL is gone since v3.9;
 - IP_NF_QUEUE: commit 3dd6664f ("netfilter: remove unused "config
   IP_NF_QUEUE"");
 - IP_NF_TARGET_ULOG: commit d4da843e ("netfilter: kill remnants of
   ulog targets");
 - VIDEO_OUTPUT_CONTROL: commit f167a64e ("video / output: Drop
   display output class support");
 - MTD_PARTITIONS: commit 6a8a98b2 ("mtd: kill
   CONFIG_MTD_PARTITIONS");
 - MTD_CHAR: commit 660685d9 ("mtd: merge mtdchar module with
   mtdcore");
 - MTD_CONCAT: commit f53fdebc ("mtd: drop MTD_CONCAT from Kconfig
   entirely");

Link: http://lkml.kernel.org/r/1500527065-4575-1-git-send-email-krzk@kernel.orgSigned-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adding high-level "if PPS" makes lower-level dependency tests superfluous.

Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708261050500.8156@localhost.localdomainSigned-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Acked-by: NRodolfo Giometti <giometti@enneenne.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Collection of aesthetic adjustments to various PPS-related files,
directories and Documentation, some quite minor just for the sake of
consistency, including:

 * Updated example of pps device tree node (courtesy Rodolfo G.)
 * "PPS-API" -> "PPS API"
 * "pps_source_info_s" -> "pps_source_info"
 * "ktimer driver" -> "pps-ktimer driver"
 * "ppstest /dev/pps0" -> "ppstest /dev/pps1" to match example
 * Add missing PPS-related entries to MAINTAINERS file
 * Other trivialities

Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708261048220.8106@localhost.localdomainSigned-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Acked-by: NRodolfo Giometti <giometti@enneenne.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>