- 02 9月, 2017 2 次提交
-
-
由 Christoph Hellwig 提交于
Reject attempts to set XFLAGS that correspond to di_flags2 inode flags if the inode isn't a v3 inode, because di_flags2 only exists on v3. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Currently flag switching can be used to easily crash the kernel. Disable the per-inode DAX flag until that is sorted out. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 28 6月, 2017 1 次提交
-
-
由 Darrick J. Wong 提交于
Remove the xfs_etest structure in favor of a per-mountpoint structure. This will give us the flexibility to set as many error injection points as we want, and later enable us to set up sysfs knobs to set the trigger frequency as we wish. This comes at a cost of higher memory use, but unti we hit 1024 injection points (we're at 29) or a lot of mounts this shouldn't be a huge issue. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>
-
- 20 6月, 2017 1 次提交
-
-
由 Darrick J. Wong 提交于
This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 19 6月, 2017 1 次提交
-
-
由 Christoph Hellwig 提交于
XFS_HSIZE is an extremly confusing way to calculate the size of handle_t. Given that handle_t always only had two sizes, and one of them isn't even covered by XFS_HSIZE to start with just remove the macro and use a constant sizeof expression. Note that XFS_HSIZE isn't used in xfsprogs, xfsdump or xfstests either. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 26 4月, 2017 3 次提交
-
-
由 Darrick J. Wong 提交于
At the end of a getfsmap call, we will set FMR_OF_LAST in the last struct fsmap that was handed in by userspace if we've truly run out of space mapping record (as opposed to simply running out of space in the user array). Unfortunately, fmh_entries is the wrong check for whether or not we've filled out anything in the user array because the ioctl provides that fmh_count==0 sets fmh_entries without filling out the user array. Therefore we end up writing things into user memory areas that we weren't given, and kaboom. Since Christoph amended the getfsmap structure to track the number of fsmap entries we've actually filled out, use that as part of deciding if we have to set the OF_LAST flag. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
By passing the whole fsmap_head structure and an index we can get the user point annotations right for the embedded variable sized array in struct fsmap_head. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> [darrick: change idx to unsigned int] Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Found by sparse. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 04 4月, 2017 2 次提交
-
-
由 Darrick J. Wong 提交于
Introduce a new ioctl that uses the reverse mapping btree to return information about the physical layout of the filesystem. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com>
-
由 Darrick J. Wong 提交于
In xfs_ioc_getbmap, we should only copy the fields of struct getbmap from userspace, or else we end up copying random stack contents into the kernel. struct getbmap is a strict subset of getbmapx, so a partial structure copy should work fine. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 02 3月, 2017 1 次提交
-
-
由 Ingo Molnar 提交于
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 31 1月, 2017 1 次提交
-
-
由 Eric Sandeen 提交于
The "full" argument was used only by the fiemap formatter, which is now gone with the iomap updates. Remove the unused arg. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 09 12月, 2016 1 次提交
-
-
由 Miklos Szeredi 提交于
Also check d_is_symlink() in callers instead of inode->i_op->readlink because following patches will allow NULL ->readlink for symlinks. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
- 30 11月, 2016 1 次提交
-
-
由 Christoph Hellwig 提交于
This patch drops the XFS-own i_iolock and uses the VFS i_rwsem which recently replaced i_mutex instead. This means we only have to take one lock instead of two in many fast path operations, and we can also shrink the xfs_inode structure. Thanks to the xfs_ilock family there is very little churn, the only thing of note is that we need to switch to use the lock_two_directory helper for taking the i_rwsem on two inodes in a few places to make sure our lock order matches the one used in the VFS. Signed-off-by: NChristoph Hellwig <hch@lst.de> Tested-by: NJens Axboe <axboe@fb.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 08 11月, 2016 1 次提交
-
-
由 Eric Sandeen 提交于
The open-coded pattern: ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t) is all over the xfs code; provide a new helper xfs_iext_count(ifp) to count the number of inline extents in an inode fork. [dchinner: pick up several missed conversions] Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 10 10月, 2016 1 次提交
-
-
由 Darrick J. Wong 提交于
Since we can only turn on the rt flag if there are no data extents, we can safely turn off the reflink flag if the rt flag is being turned on. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reported-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 06 10月, 2016 3 次提交
-
-
由 Darrick J. Wong 提交于
Since we don't have a strategy for handling both DAX and reflink, for now we'll just prohibit both being set at the same time. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
We don't support sharing blocks on the realtime device. Flag inodes with the reflink or cowextsize flags set when the reflink feature is disabled. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Create a per-inode extent size allocator hint for copy-on-write. This hint is separate from the existing extent size hint so that CoW can take advantage of the fragmentation-reducing properties of extent size hints without disabling delalloc for regular writes. The extent size hint that's fed to the allocator during a copy on write operation is the greater of the cowextsize and regular extsize hint. During reflink, if we're sharing the entire source file to the entire destination file and the destination file doesn't already have a cowextsize hint, propagate the source file's cowextsize hint to the destination file. Furthermore, zero the bulkstat buffer prior to setting the fields so that we don't copy kernel memory contents into userspace. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 22 9月, 2016 1 次提交
-
-
由 Jan Kara 提交于
To avoid clearing of capabilities or security related extended attributes too early, inode_change_ok() will need to take dentry instead of inode. Propagate dentry down to functions calling inode_change_ok(). This is rather straightforward except for xfs_set_mode() function which does not have dentry easily available. Luckily that function does not call inode_change_ok() anyway so we just have to do a little dance with function prototypes. Acked-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 07 8月, 2016 1 次提交
-
-
由 Eryu Guan 提交于
In most cases, EPERM is returned on immutable inode, and there're only a few places returning EACCES. I noticed this when running LTP on overlayfs, setxattr03 failed due to unexpected EACCES on immutable inode. So converting all EACCES to EPERM on immutable inode. Acked-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NEryu Guan <guaneryu@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 8月, 2016 1 次提交
-
-
由 Darrick J. Wong 提交于
When we're iterating inode xattrs by handle, we have to copy the cursor back to userspace so that a subsequent invocation actually retrieves subsequent contents. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 20 7月, 2016 2 次提交
-
-
由 Christoph Hellwig 提交于
Instead check the file pointer for the invisble I/O flag directly, and use the chance to drop redundant arguments from the xfs_ioc_space prototype. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Jann Horn 提交于
When calling fdget() in xfs_ioc_swapext(), we need to verify that the file descriptors passed into the ioctl point to XFS inodes before we start operations on them. If we don't do this, we could be referencing arbitrary kernel memory as an XFS inode. THis could lead to memory corruption and/or performing locking operations on attacker-chosen structures in kernel memory. [dchinner: rewrite commit message ] [dchinner: add comment explaining new check ] Signed-off-by: NJann Horn <jann@thejh.net> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 16 7月, 2016 1 次提交
-
-
由 Jann Horn 提交于
Without this check, the following XFS_I invocations would return bad pointers when used on non-XFS inodes (perhaps pointers into preceding allocator chunks). This could be used by an attacker to trick xfs_swap_extents into performing locking operations on attacker-chosen structures in kernel memory, potentially leading to code execution in the kernel. (I have not investigated how likely this is to be usable for an attack in practice.) Signed-off-by: NJann Horn <jann@thejh.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 4月, 2016 2 次提交
-
-
由 Christoph Hellwig 提交于
Merge xfs_trans_reserve and xfs_trans_alloc into a single function call that returns a transaction with all the required log and block reservations, and which allows passing transaction flags directly to avoid the cumbersome _xfs_trans_alloc interface. While we're at it we also get rid of the transaction type argument that has been superflous since we stopped supporting the non-CIL logging mode. The guts of it will be removed in another patch. [dchinner: fixed transaction leak in error path in xfs_setattr_nonsize] Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Also drop the now unused readlink_copy export. [dchinner: use d_inode(dentry) rather than dentry->d_inode] Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 01 3月, 2016 3 次提交
-
-
由 Dave Chinner 提交于
If the block size of a filesystem is not at least PAGE_SIZEd, then at this point in time DAX cannot be used due to the fact we can't guarantee extents are page sized or aligned without further work. Hence disallow setting the DAX flag on an inode if the block size is too small. Also, be defensive and check the block size when reading an inode in off disk. In future, we want to allow DAX to work on any filesystem, so this is temporary while we sort of the correct conbination of extent size hints and allocation alignment configurations needed to guarantee page sized and aligned extent allocation for DAX enabled files. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
When we set or clear the XFS_DIFLAG2_DAX flag, we should also set/clear the S_DAX flag in the VFS inode. To do this, we need to ensure that we first flush and remove any cached entries in the radix tree to ensure the correct data access method is used when we next try to read or write data. We ahve to be especially careful here to lock out page faults so they don't race with the flush and invalidation before we change the access mode. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
Only file data can use DAX, so we should onyl be able to set this flag on regular files. However, the flag also serves as an "inherit" flag at file create time when set on directories, so limit the FS_IOC_FSSETXATTR ioctl to only set this flag on regular files and directories. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 09 2月, 2016 2 次提交
-
-
由 Dave Chinner 提交于
Move the di_mode value from the xfs_icdinode to the VFS inode, reducing the xfs_icdinode byte another 2 bytes and collapsing another 2 byte hole in the structure. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
Pull another 4 bytes out of the xfs_icdinode. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 04 1月, 2016 2 次提交
-
-
由 Dave Chinner 提交于
Rather than just being able to turn DAX on and off via a mount option, some applications may only want to enable DAX for certain performance critical files in a filesystem. This patch introduces a new inode flag to enable DAX in the v3 inode di_flags2 field. It adds support for setting and clearing flags in the di_flags2 field via the XFS_IOC_FSSETXATTR ioctl, and sets the S_DAX inode flag appropriately when it is seen. When this flag is set on a directory, it acts as an "inherit flag". That is, inodes created in the directory will automatically inherit the on-disk inode DAX flag, enabling administrators to set up directory heirarchies that automatically use DAX. Setting this flag on an empty root directory will make the entire filesystem use DAX by default. Signed-off-by: NDave Chinner <dchinner@redhat.com>
-
由 Dave Chinner 提交于
Now that the ioctls have been hoisted up to the VFS level, use the VFs definitions directly and remove the XFS specific definitions completely. Userspace is going to have to handle the change of this interface separately, so removing the definitions from xfs_fs.h is not an issue here at all. Signed-off-by: NDave Chinner <dchinner@redhat.com>
-
- 03 11月, 2015 2 次提交
-
-
由 Andreas Gruenbacher 提交于
Setting or removing the "SGI_ACL_[FILE|DEFAULT]" attributes via the XFS_IOC_ATTRMULTI_BY_HANDLE ioctl completely bypasses the POSIX ACL infrastructure, like setting the "trusted.SGI_ACL_[FILE|DEFAULT]" xattrs did until commit 6caa1056. Similar to that commit, invalidate cached acls when setting/removing them via the ioctl as well. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Andreas Gruenbacher 提交于
When setting attributes via XFS_IOC_ATTRMULTI_BY_HANDLE, the user-space buffer is copied into a new kernel-space buffer via memdup_user; that buffer then isn't freed. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 12 10月, 2015 3 次提交
-
-
由 Bill O'Donnell 提交于
This patch modifies the stats counting macros and the callers to those macros to properly increment, decrement, and add-to the xfs stats counts. The counts for global and per-fs stats are correctly advanced, and cleared by writing a "1" to the corresponding clear file. global counts: /sys/fs/xfs/stats/stats per-fs counts: /sys/fs/xfs/sda*/stats/stats global clear: /sys/fs/xfs/stats/stats_clear per-fs clear: /sys/fs/xfs/sda*/stats/stats_clear [dchinner: cleaned up macro variables, removed CONFIG_FS_PROC around stats structures and macros. ] Signed-off-by: NBill O'Donnell <billodo@redhat.com> Reviewed-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Jan Tulak 提交于
Currently, we depends on Linux XATTR value for on disk definition. Which causes trouble on other platforms and maybe also if this value was to change. Fix it by creating a custom definition independent from those in Linux (although with the same values), so it is OK with the be16 fields used for holding these attributes. This patch reflects a change in xfsprogs. Signed-off-by: NJan Tulak <jtulak@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Jan Tulak 提交于
Remove a hard dependency of Linux XATTR_LIST_MAX value by using a prefixed version. This patch reflects the same change in xfsprogs. Signed-off-by: NJan Tulak <jtulak@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
- 04 6月, 2015 1 次提交
-
-
由 Christoph Hellwig 提交于
The flags argument to xfs_trans_commit is not useful for most callers, as a commit of a transaction without a permanent log reservation must pass 0 here, and all callers for a transaction with a permanent log reservation except for xfs_trans_roll must pass XFS_TRANS_RELEASE_LOG_RES. So remove the flags argument from the public xfs_trans_commit interfaces, and introduce low-level __xfs_trans_commit variant just for xfs_trans_roll that regrants a log reservation instead of releasing it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-