- 07 4月, 2011 2 次提交
-
-
由 Kuninori Morimoto 提交于
If several boards are enabled in the kernel configuration, fsi_init_pm_clock() functions from board-ap4evb.c will run on any of them. Prevent this by calling these functions from the .init_machine() callback instead of using device_initcall(). Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
If several boards are enabled in the kernel configuration, hdmi_init_pm_clock() functions from board-ap4evb.c and board-mackerel.c will run on any of them. Prevent this by calling these functions from the .init_machine() callback instead of using device_initcall(). Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <damm@opensource.se> Tested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 29 3月, 2011 1 次提交
-
-
由 Thomas Gleixner 提交于
Convert to the new function names. Automated with coccinelle. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 25 3月, 2011 2 次提交
-
-
由 Guennadi Liakhovetski 提交于
SDHI registers occupy only a 0x100 byte large window, not 0x200 byte. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Guennadi Liakhovetski 提交于
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 23 3月, 2011 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
Cameras are currently broken on ARM sh-mobile platforms. They need a suitable coherent DMA mask. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 04 3月, 2011 1 次提交
-
-
由 Kuninori Morimoto 提交于
ap4evb WVGA LCDC panel expect 33.3MHz for dot-clock, but current dot-clock was 50.0MHz. This patch modify clock divider value. Signed-off-by: NMakoto Ueda <makoto.ueda.ub@renesas.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 26 1月, 2011 1 次提交
-
-
由 Kuninori Morimoto 提交于
Current format selection of FSI-codecs depended on platform information for FSI, and chip default settings for codecs. It is not understandable/formal method. This patch modify FSI and FSI-codecs to use snd_soc_dai_set_fmt. But FSI can use I2S/PCM and SPDIF format today. It can be selected to I2S/PCM by snd_soc_dai_set_fmt, but can not select SPDIF. So, this patch change FSI platform information to have DAI/SPDIF mode. If platform selects DAI mode (default), FSI-codecs can select I2S/PCM by snd_soc_dai_set_fmt, and if it is SPDIF mode, FSI become SPDIF format. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 1月, 2011 1 次提交
-
-
由 Kuninori Morimoto 提交于
This patch add platform_device_id which can control PortA/PortB for FSI2-HDMI from platform data. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 1月, 2011 1 次提交
-
-
由 Kuninori Morimoto 提交于
This patch add snd_soc_dai_ops :: set_fmt to FSI driver and select master/slave clock mode by snd_soc_dai_set_fmt on fsi-xxx.c instead of platform infomation code. This patch remove fsi_is_master function which is no longer needed. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 13 1月, 2011 1 次提交
-
-
由 Magnus Damm 提交于
The Card Detect GPIOs used on AP4EVB and Mackerel are alwayws valid, so kill off the unused !gpio_is_valid() case. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 12 1月, 2011 1 次提交
-
-
由 Arnd Hannemann 提交于
This patch enables the interrupt generation for SDIO IRQs of the sdhi controllers of the SoC. To make sure interrupts are handled announce the MMC_CAP_SDIO_IRQ capability on AP4EVB. Tested with a b43-based SDIO wireless card. Signed-off-by: NArnd Hannemann <arnd@arndnet.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 07 1月, 2011 1 次提交
-
-
由 Magnus Damm 提交于
Break-out INTC specific IRQ demux code from the file entry-macro-intc.S and register during run-time. Covers sh7367, sh7377 and sh7372. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 06 1月, 2011 1 次提交
-
-
由 Kuninori Morimoto 提交于
fsib_clk will be used when fdiv_clk failed on fsi_hdmi_set_rate. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 05 1月, 2011 3 次提交
-
-
由 Guennadi Liakhovetski 提交于
Prepare the ap4evb board for the MIPI DSI driver transition to support different register layouts. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Now, that the MIPI DSI driver implements runtime PM, we don't need anymore to configure clocks statically in the platform code. This patch also adds a DSITX1 clock definition for sh7372 and attaches PHY clocks to respective devices. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 05 12月, 2010 1 次提交
-
-
由 Kuninori Morimoto 提交于
When CONFIG_ZBOOT_ROM is selected, the resulting zImage file will be small boot loader and may be burned to rom or flash. This is the board-specific portion of this patch-set. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 11月, 2010 1 次提交
-
-
由 Kuninori Morimoto 提交于
Current FSI-Ak4642 device had niche settings which were FSI2-A-AK4643 and FSI-A-AK4642. This patch add platform_device_id which can control FSI/FSI2, PortA/PortB, AK4642/AK4643 from platform data. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 11月, 2010 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
Have to add DMA slave configuration to enable DMA for the sh7372 MMCIF controller. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 24 11月, 2010 3 次提交
-
-
由 Kuninori Morimoto 提交于
The PLLC2 clock was utilizing the same sort of enable/disable without regard to usecount approach that the FSIDIV clock was when being used as a PLL pass-through. This forces the enable/disable through the clock framework, which now prevents the clock from being ripped out or modified underneath users that have an existing handle on it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Current AP4 FSI didn't use set_rate for ak4642, and used dummy rate when init. And FSI driver was modified to always call set_rate. The user which are using FSI set_rate is only AP4 now. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Current AP4 FSI set_rate function used bogus clock process which didn't care enable/disable and clk->usecound. To solve this issue, this patch also modify FSI driver to call set_rate with enough options. This patch modify it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 19 11月, 2010 1 次提交
-
-
由 Magnus Damm 提交于
Update the AP4EVB board code to go from a single I/O resource to two I/O resources for the MIPI-DSI driver. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 15 11月, 2010 1 次提交
-
-
由 Kuninori Morimoto 提交于
Tested-by: NTony SIM <chinyeow.sim.xt@renesas.com> Tested-by: NTAKEI Mitsuharu <takei.andr@gmail.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 10 11月, 2010 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
On ap4evb PLLC2 is only used as a parent of the HDMI clock, therefore it can be reconfigured freely to improve HDMI clock precision. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 08 11月, 2010 1 次提交
-
-
由 Yusuke Goda 提交于
This makes the loader and bootenv partitions read-only under MTD for the on-board NOR flash. Signed-off-by: NYusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 31 10月, 2010 1 次提交
-
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 29 10月, 2010 1 次提交
-
-
由 Arnd Hannemann 提交于
On AP4EVB the card detect pin of the top SD/MMC slot is not directly connected to the tmio/mmcif controller but to a GPIO pin, so polling needs to be done for SDHI1 and MMCIF in order to support hotplug for that slot. SHDI1 and MMCIF share that slot, and the used controller is selected by a DIP switch. This patch adds a helper function to check if a card is present in that particular slot, registers this function with SDHI1 and MMCIF and enables polling for SDHI1. Signed-off-by: NArnd Hannemann <arnd@arndnet.de> Tested-by: NYusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 25 10月, 2010 2 次提交
-
-
由 Guennadi Liakhovetski 提交于
Add platform data, necessary to use Sony IMX074 camera sensor with AP4EVB. Note: this does not work reliably without an API to reserve contiguous and coherent memory for V4L DMA buffers. Such memory reservation has to be added as soon as a suitable API becomes available. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 TAKEI Mitsuharu 提交于
Signed-off-by: NTAKEI Mitsuharu <takei.andr@gmail.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 20 10月, 2010 1 次提交
-
-
由 Nicolas Pitre 提交于
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
-
- 15 10月, 2010 3 次提交
-
-
由 Guennadi Liakhovetski 提交于
Now that HDMI videomodes have become optional, they can be safely removed from ap4evb platform data, since anyway 720p seems to be the best supported mode. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
This patch also registered global extal clocks to sh7372.h Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 13 10月, 2010 1 次提交
-
-
由 Magnus Damm 提交于
Just use MMCIF as name to match the sh7372 data sheet. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 06 10月, 2010 1 次提交
-
-
由 Nicolas Kaiser 提交于
Remove duplicated include. Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 14 9月, 2010 3 次提交
-
-
由 Kuninori Morimoto 提交于
Current touchpanel had below 2 issues - LCDD2 pin which is needed for WVGA was changed to IRQ28_123 pin on ts_get_pendown_state - GPIO pull up on ts_init was disabled by gpio_request on ts_get_pendown_state. This mean the return value from gpio_get_value is untrusted. This patch solve these issues Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Add video modes for 480p and SXGA (1280x1024). Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
This is a preparation for HDMI hotplug support. This patch just moves all platform defined video modes for the sh_mobile_lcdcfb driver to separate arrays and switches all users to use element 0 of that array, so, this patch doesn't introduce any functional changes and as such should not cause any regressions. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-