- 19 5月, 2010 13 次提交
-
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s5pv210-clock' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s5p6440-clock' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s3c6410-clock' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/gpio2' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/rx1950' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/acer-n35' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/samsung-clock' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/samsung-hwmon' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/samsung-dma' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s5p-general' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s3c24xx-general' into for-linus/samsung2
-
由 Pannaga Bhushan 提交于
This patch adds GPIOlib support for S5PV210. Signed-off-by: NPannaga Bhushan <p.bhushan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Timer interrupts range was defined as 43-47, what overlaps with VIC0 range (32-64). This was caused probably by a typo while the common interrupts definition was refactored. This patch moves timer interrupt range to safe area of 11-15 (just before uart range). This fixes the commit 87aef30e ("ARM: S5P: Change S5P_TIMER_IRQ based to 11 for SAMSUNG S5P series.") which meant to move these into the old (and previously reserved) ISA space. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [ben-linux@fluff.org: update description] Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 18 5月, 2010 8 次提交
-
-
由 Ben Dooks 提交于
The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios field and the bank-bank offset inside the loop, and also in the for() loop with a ++. Remove the ++, as the number is already at the next GPIO, thus ensuring that we don't skip a gpio bank by accident. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add a table for the GPIO bank sizes for each SoC Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
As part of the cleanup, remove the old macros mapping GPIO numbers to the base of the register now we have gpiolib to manage the GPIO mappings for us. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Update a couple of S3C24XX and S3C2412 files that are still using the GPIO number to register mapping calls to get the s3c_gpio_chip and use the base field from that. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Start cleaning up the numbering of GPIO banks by removing the old bank start definitions currently being used by some of the header files. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Vasily Khoruzhick 提交于
Increase GPIOs number for S3C244X, and make S3C_GPIO_END point to BANKJ end, otherwise gpiolib refuses to register BANKJ Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> [ben-linux@fluff.org: Move pm fix to new patch] Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Maurus Cuelenaere 提交于
This adds the xusbxti clock to S3C64XX platform. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mike Solovyev 提交于
Seems like a typo, wrong setup leads to broken image on ipaq screen. Signed-off-by: NMike Solovyev <ms@sk.2-ch.org> Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 17 5月, 2010 17 次提交
-
-
由 Jassi Brar 提交于
All other functions have the channel argument of type 'unsigned int' the s3c2410_dma_devconfig also accept the same value as argument but treat it as type 'int'. Remove this anomaly by make it 'unsigned int'. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
Add sclk clocks of type 'struct clksrc_clk' clock. The 'group2' of clock clock sources is also added. This patch also changes the the 'id' member value of the uclk1 clock for instance instance 0 since there are 4 instances of the uclk1 clock. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
Add the sclk_audio(0/1/2) clocks and sclk_spdif clock of type 'struct clksrc_clk' clock. Also, add clk_pcmcdclk(0/1/2) clocks of type 'struct clk' clock. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
Add sclk_dac, sclk_mixer and sclk_hdmi clocks. These clocks are of type 'struct clksrc_clk' and so have a corresponding clock list. These clocks are also added to the list of clocks to be registered at boot time. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
This patch adds the following system clocks. 1. clk_sclk_hdmiphy 2. clk_sclk_usbphy0 3. clk_sclk_usbphy1 4. sclk_dmc (dram memory controller clock) 5. sclk_onenand Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
This patch adds the following. 1. Adds 'clk_sclk_hdmi27m' clock to represent the HDMI 27MHz clock. 2. Adds 'clk_vpllsrc; clock of type clksrc_clk to represent the input clock for VPLL. 3. Adds 'clk_sclk_vpll' clock of type clksrc_clk to represent the output of the MUX_VPLL mux. 4. Add clk_sclk_hdmi27m, clk_vpllsrc and clk_sclk_vpll to the list of clocks to be registered. 5. Adds boot time print of 'clk_sclk_vpll' clock rate. 6. Adds 'clk_fout_vpll' clock to plat-s5p such that it is reusable on other s5p platforms. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
The clk_p83 clock, which is the PCLK clock for PSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a clock divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the PCLK PSYS clock. This patch modifies the following. 1. Removes definitions and usage of 'clk_p66' clock. 2. Adds 'clk_pclk_psys' clock which is of type 'struct clksrc_clk'. 3. Replaces all usage of clk_p66 with clk_pclk_psys clock. 4. Adds clk_pclk_psys into list of clocks to be registered. 5. Removes the sys_clks array since it is no longer required. Also the registration of clocks in sys_clks is also removed. 6. Remove the 'GET_DIV' as it is no longer required. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
The clk_p83 clock, which is the PCLK clock for DSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a clock divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the PCLK DSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_p83' clock. 2. Adds 'clk_pclk_dsys' clock which is of type 'struct clksrc_clk'. 3. Replace all usage of clk_p83 with clk_pclk_dsys clock. 4. Adds clk_pclk_dsys into list of clocks to be registered. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
The clk_h100 clock represents the IMEM clock for the MSYS domain. This clock rate of this clock is always half of the hclk_msys clock. There is an issue when getting the clock rate of the clk_h100 clock (clock get_rate hclk_h100 always returns clock rate that is equal to the hclk_msys clock rate). This patch modifies the following. 1. Moves the definition of the clk_h100 clock into the 'init_clocks' list with the appropriate parent, ctrlbit, enable and ops fields. 2. The name of the clock is changed from 'clk_h100' to 'hclk_imem' to represent more clearly that is represents the IMEM clock in the MSYS domain. 3. The function to get the clock rate of the hclk_imem clock is added. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
The clk_p100 clock, which is the PCLK clock for MSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a choice of clock source and a pre-divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the PCLK MSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_p100' clock. 2. Adds 'clk_pclk_msys' clock which is of type 'struct clksrc_clk'. 3. Replace all usage of clk_p100 with clk_pclk_msys clock. 4. Adds clk_pclk_msys into list of clocks to be registered. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
The clk_h133 clock, which is the HCLK clock for PSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a choice of clock source and a pre-divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the HCLK PSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_h133' clock. 2. Adds 'clk_hclk_psys' clock which is of type 'struct clksrc_clk'. 3. Replace all usage of clk_h133 with clk_hclk_psys clock. 4. Adds clk_hclk_psys into list of clocks to be registered. 5. Removes the clock rate calculation of hclk133 and replaces it with code that derives the HCLK PSYS clock rate from the clk_hclk_psys clock. 6. Modify printing of the system clock rates. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
The clk_h166 clock, which is the HCLK clock for DSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a choice of clock source and a pre-divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the HCLK DSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_h166' clock. 2. Adds 'clk_sclk_a2m' clock which is one of possible parent clock sources for the DSYS HCLK clock. 3. Adds 'clk_hclk_dsys' clock which is of type 'struct clksrc_clk'. 4. Replace all usage of clk_h166 with clk_hclk_dsys clock. 5. Adds clk_sclk_a2m and clk_hclk_dsys into list of clocks to be registered. 6. Removes the clock rate calculation of hclk166 and replaces it with code that derives the HCLK DSYS clock rate from the clk_hclk_dsys clock. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
The clk_h200 represents the HCLK for the MSYS domain. This clock is of type 'struct clk' but on V210, it is more suitable to be of type 'struct clksrc_clk' (since it is a divided version of the armclk). The replacement clock is renamed as clk_hclk_msys to indicate that it represents the HCLK for MSYS domain. This patch modifies the following. 1. Removes the usage of the clk_h200 clock. 2. Adds the new clock 'clk_hclk_msys'. 3. Adds clk_hclk_msys to the list of sysclks to be registered. 4. Modifies the hclk_msys clock rate calculation procedure to be based on the new clk_hclk_msys clock. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
This patch modifies the following. 1. Adds arm clock 'clk_armclk' of type clksrc_clk clock type. 2. Adds arm clock to the list of system clocks 'sysclks' for registering it along with other system clocks. 3. Modifies the armclk clock rate calculation procedure to be based on the new clk_armclk clock. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
The assignment of clock rates for fout apll/mpll/epll is moved further up in the s5pv210_setup_clocks function because the subsequent patches require the clock rate of fout clocks to be setup. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
This patch modifies the following. 1. Registers the mout_apll clksrc_clk clock. 2. The mout_mpll and mout_epll clocks were registered as 'struct clk' types and then their parents were setup using the s3c_set_clksrc function. This patch reduces the two steps into one by registering the mout_mpll and mout_epll clocks using the s3c_register_clksrc function. 3. As per point 2 above, the init_parents array is no longer required. So the mout clocks are now put together in a new array named 'sysclks'. The sysclks array will list the system level clocks and more clocks will be added to it in the subsequent patches. 4. The clks array is left empty because of the movement of mpll and epll clocks into the sysclks array. It is not deleted since subsequent patches will add clocks into this array. Signed-off-by: Thomas Abraham <thomas.ab <at> samsung.com> Signed-off-by: Kukjin Kim <kgene.kim <at> samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
The system clock definitions are currently defined below the peripheral clock definitions in the V210 clock code. For the V210 clock updates that follow this patch, it is required that the system clock definitions such as the mout_apll and mout_mpll be defined prior to the device clock definitions. This patch re-arranges the system clock defintions for the clock updates that follow this patch. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 14 5月, 2010 2 次提交
-
-
由 Jassi Brar 提交于
Declare 'audio-bus' clock for IISv4 controller of S3C6410. Even though the name is same as that for IISv3, the id is set to -1(just one instance of the controller is available) which helps always fetch the correct clock. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jassi Brar 提交于
Declare possible sources of CLKAUDIO[2]/audio-bus for IISv4 controller. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-