- 30 11月, 2005 40 次提交
-
-
由 Steve French 提交于
-
由 Steve French 提交于
the request queue. Also periodically wakeup response_q so threads can check if stuck requests have timed out. Workaround Windows server illegal smb length on transact2 findfirst response. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
disabled. Also set mode, uid, gid better on mkdir and create for the case when Unix Extensions is not enabled and setuids is enabled. This is necessary to fix the hole in which chown could be allowed for non-root users in some cases if root mounted, and also to display the mode and uid properly in some cases. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Linus Torvalds 提交于
-
由 Mark Fortescue 提交于
A cut and past error regarding the CG3 frame buffer needs to be fixed. It also affects Creator/Creator3D/Elite3D. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
- pseudo_palette is only 16 entries long - the pseudo_palette, if using the generic drawing functions, must always be u32 regardless of bpp - the fillrect accelerator is using region->color regardless of the visual. region->color is the index to the pseudo_palette if visual is truecolor Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shaohua Li 提交于
Setting irq affinity stops working when MSI is enabled. With MSI, move_irq is empty, so we can't change irq affinity. It appears a typo in Ashok's original commit for this issue. X86_64 actually is using move_native_irq. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
Access to a journaled HFS+ volume is not officially supported under Linux, so mount such a volume read-only, but users can override this behaviour using the "force" mount option. The minimum requirement to relax this check is to at least check that the journal is empty and so nothing needs to be replayed to make sure the volume is consistent. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Mahoney 提交于
If an external device is used for a journal, by default it will use the entire device. The reiserfs journal code allocates structures per journal block when it mounts the file system. If the journal device is too large, and memory cannot be allocated for the structures, it will continue and ultimately panic when it can't pull one off the free list. This patch handles the allocation failure gracefully and prints an error message at mount time. Changes: Updated error message to be more descriptive to the user. Discussed and approved on ReiserFS Mailing List, Nov 28. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paolo Galtieri 提交于
I recently discovered a bug on PPC which causes the floating point registers to get corrupted when CONFIG_PREEMPT=y. The problem occurred while running a multi threaded Java application that does floating point. The problem could be reproduced in anywhere from 2 to 6 hours. With the patch I have included below it ran for over a week without failure. Signed-off-by: NPaolo Galtieri <pgaltieri@mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Tom Rini <trini@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
Fix swsusp on machines not supporting S4. With recent changes, it is not possible to trigger it using /sys filesystem. Swsusp does not really need any support from low-level code, it is possible to reboot or halt at the end of suspend. Signed-off-by: NPavel Machek <pavel@suse.cz> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thierry Vignaud 提交于
Anne NICOLAS <anne.nicolas@mandriva.com> and Andres Kaaber <andres.kaaber@rescue.ee> reported their HP laptop didn't reboot smoothly. Signed-off-by: NThierry Vignaud <tvignaud@mandriva.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
set_page_dirty() will not cope with being handed a page * which is part of a compound page, but not the master page in that compound page. This case can occur via access_process_vm() if you attemp to write to another process's hugepage memory area using ptrace() (causing an oops or hang). This patch fixes the bug by only calling set_page_dirty() from access_process_vm() if the page is not a compound page. We already use a similar fix in bio_set_pages_dirty() for the case of direct io to hugepages. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Acked-by: NWilliam Irwin <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matt Helsley 提交于
The uid_t and gid_t fields appear to present a 32/64-bit userspace/kernel problem for some archs. This patch addresses the problem by fixing the size to the largest size for uid_t/gid_t used in the kernel. This preserves the total size of the event structure while ensuring that the layouts of the ID change event match in 32 and 64-bit kernels and applications. Signed-off-by: NMatt Helsley <matthltc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
Use the correct pointer to clear the memory of the return values, to prevent stack corruption in the callers stackframe. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This fixes a bug noticed by Paolo Galtieri and fixed for ARCH=ppc in the previous commit (ppc: fix floating point register corruption). This fixes the arch/powerpc code by adding preempt_disable/enable, and also cleans it up a bit by pulling out the code that discards any lazily-switched CPU register state into a new function, rather than having that code repeated in three places. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paolo Galtieri 提交于
I recently discovered a bug on PPC which causes the floating point registers to get corrupted when CONFIG_PREEMPT=y. The problem occurred while running a multi threaded Java application that does floating point. The problem could be reproduced in anywhere from 2 to 6 hours. With the patch I have included below it ran for over a week without failure. Signed-off-by: NPaolo Galtieri <pgaltieri@mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Tom Rini <trini@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linus Torvalds 提交于
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
This patch makes two needlessly global functions static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch contains the following cleanups: - make needlessly global code static - ip_conntrack_core.c: ip_conntrack_flush() -> ip_conntrack_flush(void) Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch makes two needlessly global functions static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arjan van de Ven 提交于
the patch below marks various variables const in net/; the goal is to move them to the .rodata section so that they can't false-share cachelines with things that get written to, as well as potentially helping gcc a bit with optimisations. (these were found using a gcc patch to warn about such variables) Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Use semaphore to protect atm_devs list, as no one need access to it from interrupt context. Avoid race conditions between atm_dev_register(), atm_dev_lookup() and atm_dev_deregister(). Fix double spin_unlock() bug. Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitchell Blank Jr 提交于
Signed-off-by: NMitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitchell Blank Jr 提交于
From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Pieter 提交于
From: Jan Pieter <pptp@jp.dhs.org> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitchell Blank Jr 提交于
Signed-off-by: NMitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitchell Blank Jr 提交于
Signed-off-by: NMitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitchell Blank Jr 提交于
From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Stroyan 提交于
The tcp_ehash hash table gets too big on systems with really big memory. It is worse on systems with pages larger than 4KB. It wastes memory that could be better used. It also makes the netstat command slow because reading /proc/net/tcp and /proc/net/tcp6 needs to go through the full hash table. The default value should not be larger for larger page sizes. It seems that the effect of page size is an unintended error dating back a long time. I also wonder if the default value really should be a larger fraction of memory for systems with more memory. While systems with really big ram can afford more space for hash tables, it is not clear to me that they benefit from increasing the allocation ratio for this table. The amount of memory allocated is determined by net/ipv4/tcp.c:tcp_init and mm/page_alloc.c:alloc_large_system_hash. tcp_init calls alloc_large_system_hash passing parameters- bucketsize=sizeof(struct tcp_ehash_bucket) numentries=thash_entries scale=(num_physpages >= 128 * 1024) ? (25-PAGE_SHIFT) : (27-PAGE_SHIFT) limit=0 On i386, PAGE_SHIFT is 12 for a page size of 4K On ia64, PAGE_SHIFT defaults to 14 for a page size of 16K The num_physpages test above makes the allocation take a larger fraction of the total memory on systems with larger memory. The threshold size for a i386 system is 512MB. For an ia64 system with 16KB pages the threshold is 2GB. For smaller memory systems- On i386, scale = (27 - 12) = 15 On ia64, scale = (27 - 14) = 13 For larger memory systems- On i386, scale = (25 - 12) = 13 On ia64, scale = (25 - 14) = 11 For the rest of this discussion, I'll just track the larger memory case. The default behavior has numentries=thash_entries=0, so the allocated size is determined by either scale or by the default limit of 1/16 of total memory. In alloc_large_system_hash- | numentries = (flags & HASH_HIGHMEM) ? nr_all_pages : nr_kernel_pages; | numentries += (1UL << (20 - PAGE_SHIFT)) - 1; | numentries >>= 20 - PAGE_SHIFT; | numentries <<= 20 - PAGE_SHIFT; At this point, numentries is pages for all of memory, rounded up to the nearest megabyte boundary. | /* limit to 1 bucket per 2^scale bytes of low memory */ | if (scale > PAGE_SHIFT) | numentries >>= (scale - PAGE_SHIFT); | else | numentries <<= (PAGE_SHIFT - scale); On i386, numentries >>= (13 - 12), so numentries is 1/8196 of bytes of total memory. On ia64, numentries <<= (14 - 11), so numentries is 1/2048 of bytes of total memory. | log2qty = long_log2(numentries); | | do { | size = bucketsize << log2qty; bucketsize is 16, so size is 16 times numentries, rounded down to a power of two. On i386, size is 1/512 of bytes of total memory. On ia64, size is 1/128 of bytes of total memory. For smaller systems the results are On i386, size is 1/2048 of bytes of total memory. On ia64, size is 1/512 of bytes of total memory. The large page effect can be removed by just replacing the use of PAGE_SHIFT with a constant of 12 in the calls to alloc_large_system_hash. That makes them more like the other uses of that function from fs/inode.c and fs/dcache.c Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This reverts commit 252ac865. It impacts the LSI customers using the mptstm target mode drivers (source tar-ball at ftp://ftp.lsil.com/HostAdapterDrivers/linux/Fusion-MPT/mptstm-1.00.13-src.tar.gz for those who care). Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
Use copy_user_highpage directly instead of cow_user_page in do_no_page: in the immediately following page_cache_release, and elsewhere, it is assuming that new_page is normal. If any VM_PFNMAP driver can get to do_no_page, it's just a BUG (but not in the case of do_anonymous_page). Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
Clean away do_wp_page's "src_page": cow_user_page makes it unnecessary. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-