- 24 5月, 2013 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
We use two flags, one to indicate an invalidation is needed after creating a new entry and one to indicate an invalidation is needed after removing an entry. However we were testing the wrong flag in the remove case. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The message is only meant to be displayed if resource 0 is empty, but was displayed if any is. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The TLB has 512 congruence classes (2048 entries 4 way set associative) while P7 had 128 Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kent Yoder 提交于
Fixes a race on driver init with registering algorithms where the driver status flag wasn't being set before self testing started. Added the cra_alignmask field for CBC and ECB modes. Fixed a bug in GCM where AES block size was being used instead of authsize. Removed use of blkcipher_walk routines for scatterlist processing. Corner cases in the code prevent us from processing an entire scatterlist at a time and walking the buffers in block sized chunks turns out to be unecessary anyway. Fixed off-by-one error in saving off extra data in the sha code. Fixed accounting error for number of bytes processed in the sha code. Signed-off-by: NKent Yoder <key@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 22 5月, 2013 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds由 Linus Torvalds 提交于
Pull LED subsystem fix from Bryan Wu. * 'leds-fixes-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: leds-gpio: reserve gpio before using it
-
由 Timo Teräs 提交于
This reverts commit a99d76f9 (leds: leds-gpio: use gpio_request_one) and commit 2d7c22f6 (leds: leds-gpio: set devm_gpio_request_one() flags param correctly) which was a fix of the first one. The conversion to devm_gpio_request in commit e3b1d44c (leds: leds-gpio: use devm_gpio_request_one) is not reverted. The problem is that gpio_cansleep() and gpio_get_value_cansleep() calls can crash if the gpio is not first reserved. Incidentally this same bug existed earlier and was fixed similarly in commit d95cbe61 (leds: Fix potential leds-gpio oops). But the OOPS is real. It happens when GPIOs are provided by module which is not yet loaded. So this fixes the following BUG during my ALIX boot (3.9.2-vanilla): BUG: unable to handle kernel NULL pointer dereference at 0000004c IP: [<c11287d6>] __gpio_cansleep+0xe/0x1a *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: leds_gpio(+) via_rhine mii cs5535_mfd mfd_core geode_rng rng_core geode_aes isofs nls_utf8 nls_cp437 vfat fat ata_generic pata_amd pata_cs5536 pata_acpi libata ehci_pci ehci_hcd ohci_hcd usb_storage usbcore usb_common sd_mod scsi_mod squashfs loop Pid: 881, comm: modprobe Not tainted 3.9.2 #1-Alpine EIP: 0060:[<c11287d6>] EFLAGS: 00010282 CPU: 0 EIP is at __gpio_cansleep+0xe/0x1a EAX: 00000000 EBX: cf364018 ECX: c132b8b9 EDX: 00000000 ESI: c13993a4 EDI: c1399370 EBP: cded9dbc ESP: cded9dbc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 0000004c CR3: 0f0c4000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 881, ti=cded8000 task=cf094aa0 task.ti=cded8000) Stack: cded9de0 d09471cb 00000000 c1399260 cf364014 00000000 c1399260 c1399254 d0949014 cded9df4 c118cd59 c1399260 d0949014 d0949014 cded9e08 c118ba47 c1399260 d0949014 c1399294 cded9e1c c118bb75 cded9e24 d0949014 00000000 Call Trace: [<d09471cb>] gpio_led_probe+0xba/0x203 [leds_gpio] [<c118cd59>] platform_drv_probe+0x26/0x48 [<c118ba47>] driver_probe_device+0x75/0x15c [<c118bb75>] __driver_attach+0x47/0x63 [<c118a727>] bus_for_each_dev+0x3c/0x66 [<c118b6f9>] driver_attach+0x14/0x16 [<c118bb2e>] ? driver_probe_device+0x15c/0x15c [<c118b3d5>] bus_add_driver+0xbd/0x1bc [<d08b4000>] ? 0xd08b3fff [<d08b4000>] ? 0xd08b3fff [<c118bffc>] driver_register+0x74/0xec [<d08b4000>] ? 0xd08b3fff [<c118c8e8>] platform_driver_register+0x38/0x3a [<d08b400d>] gpio_led_driver_init+0xd/0x1000 [leds_gpio] [<c100116c>] do_one_initcall+0x6b/0x10f [<d08b4000>] ? 0xd08b3fff [<c105e918>] load_module+0x1631/0x1907 [<c10975d6>] ? insert_vmalloc_vmlist+0x14/0x43 [<c1098d5b>] ? __vmalloc_node_range+0x13e/0x15f [<c105ec50>] sys_init_module+0x62/0x77 [<c1257888>] syscall_call+0x7/0xb EIP: [<c11287d6>] __gpio_cansleep+0xe/0x1a SS:ESP 0068:cded9dbc CR2: 000000000000004c ---[ end trace 5308fb20d2514822 ]--- Signed-off-by: NTimo Teräs <timo.teras@iki.f> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Raphael Assenat <raph@8d.com> Cc: Trent Piepho <tpiepho@freescale.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NBryan Wu <cooloney@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c bugfixes from Wolfram Sang: "These should have been in rc2 but I missed it due to working on devm longer than expected. There is one ID addition, since we are touching the driver anyhow. And the feature bit documentation is one outcome of a debug session and will make it easier for users to work around problems. The rest is typical driver bugfixes." * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: suppress lockdep warning on delete_device i2c: mv64xxx: work around signals causing I2C transactions to be aborted i2c: i801: Document feature bits in modinfo i2c: designware: add Intel BayTrail ACPI ID i2c: designware: always clear interrupts before enabling them i2c: designware: fix RX FIFO overrun
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 update from Martin Schwidefsky: "An additional sysfs attribute for channel paths and a couple of bux fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pgtable: fix ipte notify bit s390/xpram: mark xpram as non-rotational s390/smp: fix cpu re-scan vs. cpu state s390/cio: add channel ID sysfs attribute s390/ftrace: fix mcount adjustment s390: fix gmap_ipte_notifier vs. software dirty pages s390: disable pfmf for clear page instruction s390/disassembler: prevent endless loop in print_fn_code() s390: remove non existent reference to GENERIC_KERNEL_THREAD
-
- 21 5月, 2013 19 次提交
-
-
由 Stephen Boyd 提交于
Before f7b861b7 ("arm: Use generic idle loop") ARM would kill the CPU within the rcu idle section. Now that the rcu_idle_enter()/exit() pair have been pushed lower down in the idle loop this is no longer true and so using RCU_NONIDLE here is no longer necessary and also harmful because RCU is not actually idle at this point. Cc: Russell King <linux@arm.linux.org.uk> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull radeon sun/hainan support from Dave Airlie: "Since I know its outside the merge window, but since this is new hw I thought I'd try and provoke the new hw exception, it just fills in the blanks in the driver for the new AMD sun and hainan chipsets." * 'drm-radeon-sun-hainan' of git://people.freedesktop.org/~airlied/linux: drm/radeon: add Hainan pci ids drm/radeon: add golden register settings for Hainan (v2) drm/radeon: sun/hainan chips do not have UVD (v2) drm/radeon: track which asics have UVD drm/radeon: radeon-asic updates for Hainan drm/radeon: fill in ucode loading support for Hainan drm/radeon: don't touch DCE or VGA regs on Hainan (v3) drm/radeon: fill in GPU init for Hainan (v2) drm/radeon: add chip family for Hainan
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull DRM fixes from Dave Airlie: "This is just a set of nouveau and radeon fixes, the nouveau ones fix some suspend/resume regressions since use of copy engines and some fixes for Z compression on some newer chipsets." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/dce2: use 10khz units for audio dto calculation drm/radeon: Fix VRAM size calculation for VRAM >= 4GB drm/radeon: Remove superfluous variable drm/nouveau: ensure channels are stopped before saving fences for suspend drm/nv50/fifo: prevent races between clients updating playlists drm/nvc0/fifo: prevent CHAN_TABLE_ERROR:CHANNEL_PENDING on fifo fini drm/nvc0/fifo: prevent races between clients updating playlists drm/nve0/fifo: prevent races between clients updating playlists drm/nve0/ltcg: poke the partition count into yet another register drm/nvc0/ltcg: fix handling of disabled partitions drm/nvc0/ce: disable ce1 on a number of chipsets drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcode drm/nouveau: fix build with nv50->nvc0
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
This is the pull request for AMD Sun/Hainan support. I've split it out separately from my regular fixes stream. Hainan is a new SI asic with no UVD or DCE hardware. The patches are minimally invasive; basically just pci ids and skipping UVD and DCE init for this family. Most of the changes to si.c are just the golden register tables for the family. * 'drm-fixes-3.10-sun' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add Hainan pci ids drm/radeon: add golden register settings for Hainan (v2) drm/radeon: sun/hainan chips do not have UVD (v2) drm/radeon: track which asics have UVD drm/radeon: radeon-asic updates for Hainan drm/radeon: fill in ucode loading support for Hainan drm/radeon: don't touch DCE or VGA regs on Hainan (v3) drm/radeon: fill in GPU init for Hainan (v2) drm/radeon: add chip family for Hainan
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Minor bug fixes. * 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dce2: use 10khz units for audio dto calculation drm/radeon: Fix VRAM size calculation for VRAM >= 4GB drm/radeon: Remove superfluous variable
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-3.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - Regression fix in xen privcmd fixing a memory leak. - Add Documentation for tmem driver. - Simplify and remove code in the tmem driver. - Cleanups. * tag 'stable/for-linus-3.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Fixed assignment error in if statement xen/xenbus: Fixed over 80 character limit issue xen/xenbus: Fixed indentation error in switch case xen/tmem: Don't use self[ballooning|shrinking] if frontswap is off. xen/tmem: Remove the usage of '[no|]selfballoon' and use 'tmem.selfballooning' bool instead. xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead. xen/tmem: Remove the boot options and fold them in the tmem.X parameters. xen/tmem: s/disable_// and change the logic. xen/tmem: Fix compile warning. xen/tmem: Split out the different module/boot options. xen/tmem: Move all of the boot and module parameters to the top of the file. xen/tmem: Cleanup. Remove the parts that say temporary. xen/privcmd: fix condition in privcmd_close()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fixes from Guenter Roeck: - Error path fixes for abituguru and iio_hwmon drivers. - Drop erroneously created attributes from nct6775 driver. - Drop redundant safety on cache lifetime for tmp401 driver. - Add explicit maintainer for LM95234 and TMP401 drivers. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: MAINTAINERS: Add myself as maintainer for LM95234 and TMP401 drivers hwmon: (tmp401) Drop redundant safety on cache lifetime hwmon: fix error return code in abituguru_probe() hwmon: (iio_hwmon) Fix null pointer dereference hwmon: (nct6775) Do not create non-existing attributes hwmon: (iio_hwmon) Fix missing iio_channel_release_all call if devm_kzalloc fail
-
由 Linus Torvalds 提交于
In commit 78d77df7 ("x86-64, init: Do not set NX bits on non-NX capable hardware") we added the early_pmd_flags that gets the NX bit set when a CPU supports NX. However, the new variable was marked __initdata, because the main _use_ of this is in an __init routine. However, the bit setting happens from secondary_startup_64(), which is called not only at bootup, but on every secondary CPU start. Including resuming from STR and at CPU hotplug time. So the value cannot be __initdata. Reported-bisected-and-tested-by: NMichal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org # v3.9 Acked-by: NPeter Anvin <hpa@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lisa Nguyen 提交于
Fixed assignment error in if statement in balloon.c Signed-off-by: NLisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Lisa Nguyen 提交于
Fixed the format length of the xenbus_backend_ioctl() function to meet the 80 character limit in xenbus_dev_backend.c Signed-off-by: NLisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Lisa Nguyen 提交于
Fixed the indentation error in the switch case in xenbus_dev_backend.c Signed-off-by: NLisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
v2: fix typo Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Skip UVD handling on them. v2: split has_uvd tracking into separate patch Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Hainan has no display hardware: - no DCE (crtc, uniphy, dac, etc.) - no VGA v2: fix bios fetch v3: fix interrupts Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
- 20 5月, 2013 13 次提交
-
-
由 Alex Deucher 提交于
v2: fix gb_addr_config value Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Linus Torvalds 提交于
Merge tag 'pinctrl-fixes-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: - Three fixes to make the boot path for device tree work properly on the Nomadik pin controller. - Compile warning fix for the vt8500 driver. - Fix error path in pinctrl-single. - Free mappings in error path of the Lantiq controller. - Documentation fixes. * tag 'pinctrl-fixes-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/lantiq: Free mapping configs for both pin and groups pinctrl: single: fix error return code in pcs_parse_one_pinctrl_entry() pinctrl: generic: Fix typos and clarify comments pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl table pinctrl: abx500: Rejiggle platform data and DT initialisation pinctrl: abx500: Specify failed sub-driver by ID instead of driver_data
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild fix from Michal Marek: "In an attempt to improve make rpm-pkg, I broke make binrpm-pkg" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: package: Makefile: unbreak binrpm-pkg target
-
由 Alex Deucher 提交于
Avoids overflows on DCE2.x devices. Also clarify the calculation on other asics. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Niels Ole Salscheider 提交于
Add ULL prefix to avoid overflow. Signed-off-by: NNiels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Niels Ole Salscheider 提交于
bool in_mode_set from struct radeon_crtc is not used anymore. Signed-off-by: NNiels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Guenter Roeck 提交于
I wrote the LM95234 driver and extended the TMP401 driver substantially, and I have hardware to test both, so it makes sense to explicitly maintain them. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NJean Delvare <khali@linux-fr.org>
-
由 Dave Airlie 提交于
Merge branch 'drm-nouveau-fixes-3.10' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Fixes some s/r problem with copy engines and ZCULL issues and playlist issues * 'drm-nouveau-fixes-3.10' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: ensure channels are stopped before saving fences for suspend drm/nv50/fifo: prevent races between clients updating playlists drm/nvc0/fifo: prevent CHAN_TABLE_ERROR:CHANNEL_PENDING on fifo fini drm/nvc0/fifo: prevent races between clients updating playlists drm/nve0/fifo: prevent races between clients updating playlists drm/nve0/ltcg: poke the partition count into yet another register drm/nvc0/ltcg: fix handling of disabled partitions drm/nvc0/ce: disable ce1 on a number of chipsets drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcode drm/nouveau: fix build with nv50->nvc0
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-