Coverity pointed out that at return point error is always 0 so the
conditional is not needed.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

When I was adjusting patch in 848d4793 to
use devm_ioremap_resource() I messed it up.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Sharp SL-6000 (tosa) touchscreen needs wider limits to properly map all
points on the screen. Expand ranges in abs_x and abs_y arrays according
to the touchscreen area.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

These models need i8042.notimeout, otherwise the touchpad will not work.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138
Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The bitmask comment says it will enable GPIO 8-14 and 16-20 for keypad use,
but it actually enables GPIO 8-11 and 13-20 due to a bit error.

Instead of masking of the "hole" at GPIO 12 (which is used for keypad
output 4) mask of the proper "hole" at GPIO 15.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add the new flags argument to calls of (devm_)gpiod_get*().

Currently both forms (with or without the flags argument) are valid thanks
to transitional macros in <linux/gpio/consumer.h>. These macros will be
removed once all consumers are updated and the flags argument will become
compulsory.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add Thrustmaster as Xbox 360 controller vendor. This is required for
example to make the GP XID (044f:b326) gamepad work.
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add the USB ID for the Xbox 360 Thrustmaster Ferrari 458 Racing Wheel.
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The check to see whether the device is already disabled in
max77693_haptic_disable() was inversed, this change corrects it.
Signed-off-by: NJaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

xenkbd_disconnect_backend doesn't free grant table entry.  This bug affects
live migration.

xenkbd_disconnect_backend uses gnttab_end_foreign_access_ref to handle
grant table entry which doesn't really free an entry.

Thus every time we do xenkbd_resume, grant table entry increses by one. As
an grant table entry occupies 8 bytes, an grant table page has at most 512
entries. Every 512 times we do xenkdb_resume, grant table pages increses by
one.

After around 3500 times of live migration, grant table pages will increase
by 7, causing too many pages to populate and hitting max_pages limit when
assigning pages.Thus assign_pages will fail, so will live migration.
Signed-off-by: NChang Huaixin <huaixin.chx@alibaba-inc.com>
Acked-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Since the change to struct input_mt_pos some variables are now bitfields
instead of integers. Automatic conversion from integer to bitfield entry
destroys information, therefore enforce boolean interpretation instead.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1114768
Fixes: 02d04254 ("Input: alps - use struct input_mt_pos to track coordinates")
Signed-off-by: NAndreas Bosch <linux@progandy.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare second round of input updates for 3.18.

Active multiplexing is a nice feature as it allows several pointing devices
(such as touchpad and external mouse) use their native protocols at the
same time. Unfortunately many manufacturers do not implement the feature
properly even though they advertise it. The problematic implementations are
never fixed, since Windows by default does not use this mode, and move from
one BIOS/model of laptop to another. When active multiplexing is broken
turning it on usually results in touchpad, keyboard, or both unresponsive.

With PS/2 usage on decline (most of PS/2 devices in use nowadays are
internal laptop touchpads), I expect number of users who have laptops with
working MUX implementation, docking stations with external PS/2 ports, and
who are still using external PS/2 mice, to be rather small. Let's flip the
default to be OFF and allow activating it through i8042.nomux=0 kernel
option.  We'll also keep DMI table where we can record known good models.
Acked-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Without this the aux port does not get detected, and consequently the
touchpad will not work.

https://bugzilla.redhat.com/show_bug.cgi?id=1110011

Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Unfortunately, ForcePad capability is not actually exported over PS/2, so
we have to resort to DMI checks.

Cc: stable@vger.kernel.org
Reported-by: NNicole Faerber <nicole.faerber@kernelconcepts.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Synchronize with mainline to bring in changes to Synaptics and i8042
drivers.

This patch adds support for the ar1021 i2c based touchscreen.
The driver is quite simple and only supports the Touch
Reporting Protocol.

This is the final version for an RFC patch send a while ago.
http://www.spinics.net/lists/linux-input/msg29419.htmlSigned-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

To enable the cros_ec_keyb driver to be auto-loaded when build as
module add an of match table (and export it) to match the modalias
information passed on to userspace as the Cros EC MFD driver registers
the MFD subdevices with an of_compatibility string.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fix the format string for serio device name generation to avoid negative
device numbers when the id exceeds the maximum signed integer value.
Signed-off-by: NRichard Leitner <richard.leitner@skidata.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Fix the format string for input device name generation to avoid negative
device numbers when the id exceeds the maximum signed integer value.
Signed-off-by: NRichard Leitner <richard.leitner@skidata.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Let's automatically set EV_ABS bit in device's event type list when calling
input_set_abs_params() so that drivers do not have to do it explicitly.

These calls are never in a hot paths so we won't lose much time by setting
the same bit several times.
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

In case we start with the device not fully quiesced we should make sure we
cancel the workqueue after freeing interrupt.
Signed-off-by: NPramod Gurav <pramod.gurav@smartplayin.com>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This change switch to managed resources to simplifies error handling
and module unloading and does away with platform_driver remove function.
Signed-off-by: NPramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The 'max' size passed into the function is measured in number of bits
(KEY_MAX, LED_MAX, etc) so we need to convert it accordingly before trying
to copy the data out, otherwise we will try copying too much and end up
with up with a page fault.
Reported-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Pull SCSI fixes from James Bottomley:
 "This is a set of two small fixes, both to code which went in during
  the merge window: cxgb4i has a scheduling in atomic bug in its new
  ipv6 code and uas fails to work properly with the new scsi-mq code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] uas: disable use of blk-mq I/O path
  [SCSI] cxgb4i: avoid holding mutex in interrupt context

Pull kconfig fixes for tiny setups from Josh Triplett:
 "Two Kconfig bugfixes for 3.17 related to tinification.  These fixes
  make the Kconfig "General Setup" menu much more usable"

* tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux:
  init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu
  init/Kconfig: Hide printk log config if CONFIG_PRINTK=n

commit 03b8c7b6 ("futex: Allow
architectures to skip futex_atomic_cmpxchg_inatomic() test") added the
HAVE_FUTEX_CMPXCHG symbol right below FUTEX.  This placed it right in
the middle of the options for the EXPERT menu.  However,
HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops
placing items in the EXPERT menu, and displays the remaining several
EXPERT items (starting with EPOLL) directly in the General Setup menu.

Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make
HAVE_FUTEX_CMPXCHG itself depend on FUTEX.  With this change, the
subsequent items display as part of the EXPERT menu again; the EMBEDDED
menu now appears as the next top-level item in the General Setup menu,
which makes General Setup much shorter and more usable.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>

The buffers sized by CONFIG_LOG_BUF_SHIFT and
CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't
ask about their size at all.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>

Pull i2c fixes from Wolfram Sang:
 "Two i2c driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: qup: Fix order of runtime pm initialization
  i2c: rk3x: fix 0 length write transfers

Merge tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull trace ring buffer iterator fix from Steven Rostedt:
 "While testing some new changes for 3.18, I kept hitting a bug every so
  often in the ring buffer.  At first I thought it had to do with some
  of the changes I was working on, but then testing something else I
  realized that the bug was in 3.17 itself.  I ran several bisects as
  the bug was not very reproducible, and finally came up with the commit
  that I could reproduce easily within a few minutes, and without the
  change I could run the tests over an hour without issue.  The change
  fit the bug and I figured out a fix.  That bad commit was:

    Commit 651e22f2 "ring-buffer: Always reset iterator to reader page"

  This commit fixed a bug, but in the process created another one.  It
  used the wrong value as the cached value that is used to see if things
  changed while an iterator was in use.  This made it look like a change
  always happened, and could cause the iterator to go into an infinite
  loop"

* tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Fix infinite spin in reading buffer

Pull cifs/smb3 fixes from Steve French:
 "Fix for CIFS/SMB3 oops on reconnect during readpages (3.17 regression)
  and for incorrectly closing file handle in symlink error cases"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix readpages retrying on reconnects
  Fix problem recognizing symlinks

Prepare first round of input updates for 3.18.

Pull raid5 discard fix from Neil Brown:
 "One fix for raid5 discard issue"

* tag 'md/3.17-final-fix' of git://neil.brown.name/md:
  md/raid5: disable 'DISCARD' by default due to safety concerns.

Pull drm fixes from Dave Airlie:
 "Nothing too major or scary.

  One i915 regression fix, nouveau has a tmds regression fix, along with
  a regression fix for the runtime pm code for optimus laptops not
  restoring the display hw correctly"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: make sure display hardware is reinitialised on runtime resume
  drm/nouveau: punt fbcon resume out to a workqueue
  drm/nouveau: fix regression on original nv50 board
  drm/nv50/disp: fix dpms regression on certain boards
  drm/i915: Flush the PTEs after updating them before suspend

The uas driver uses the block layer tag for USB3 stream IDs.  With
blk-mq we can get larger tag numbers that the queue depth, which breaks
this assumption.  A fix is under way for 3.18, but sits on top of
large changes so can't easily be backported.   Set the disable_blk_mq
path so that a uas device can't easily crash the system when using
blk-mq for SCSI.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are three regression fixes (cpufreq core, pcc-cpufreq, i915 /
  ACPI) and one trivial fix for a callback return value mismatch in the
  cpufreq integrator driver.

  Specifics:

   - A recent cpufreq core fix went too far and introduced a regression
     in the system suspend code path.  Fix from Viresh Kumar.

   - An ACPI-related commit in the i915 driver that fixed backlight
     problems for some Thinkpads inadvertently broke a Dell machine (in
     3.16).  Fix from Aaron Lu.

   - The pcc-cpufreq driver was broken during the 3.15 cycle by a commit
     that put wait_event() under a spinlock by mistake.  Fix that
     (Rafael J Wysocki).

   - The return value type of integrator_cpufreq_remove() is void, but
     should be int.  Fix from Arnd Bergmann"

* tag 'pm+acpi-3.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: update 'cpufreq_suspended' after stopping governors
  ACPI / i915: Update the condition to ignore firmware backlight change request
  cpufreq: integrator: fix integrator_cpufreq_remove return type
  cpufreq: pcc-cpufreq: Fix wait_event() under spinlock

final regression fix for 3.17.

* tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Flush the PTEs after updating them before suspend

The runtime pm calls need to be done before populating the children via the
i2c_add_adapter call.  If this is not done, a child can run into issues trying
to do i2c read/writes due to the pm_runtime_sync failing.
Signed-off-by: NAndy Gross <agross@codeaurora.org>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

i2cdetect -q was broken (everything was a false positive, and no transfers were
actually being sent over i2c). The way it works is by sending a 0 length write
request and checking for NACK. This patch fixes the 0 length writes and actually
sends them.
Reported-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NAlexandru M Stan <amstan@chromium.org>
Tested-by: NDoug Anderson <dianders@chromium.org>
Tested-by: NMax Schwarz <max.schwarz@online.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org