Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 19 8月, 2010 1 次提交
  3. 21 7月, 2010 2 次提交
    • L
      tracing: Reduce latency and remove percpu trace_seq · bc289ae9
      由 Lai Jiangshan 提交于 
      __print_flags() and __print_symbolic() use percpu trace_seq:

1) Its memory is allocated at compile time, it wastes memory if we don't use tracing.
2) It is percpu data and it wastes more memory for multi-cpus system.
3) It disables preemption when it executes its core routine
   "trace_seq_printf(s, "%s: ", #call);" and introduces latency.

So we move this trace_seq to struct trace_iterator.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4C078350.7090106@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      bc289ae9
    • L
      tracing: Allow to disable cmdline recording · e870e9a1
      由 Li Zefan 提交于 
      We found that even enabling a single trace event that will rarely be
triggered can add big overhead to context switch.

(lmbench context switch test)
 -------------------------------------------------
 2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K
 ctxsw  ctxsw  ctxsw ctxsw  ctxsw   ctxsw   ctxsw
------ ------ ------ ------ ------ ------- -------
  2.19   2.3   2.21   2.56   2.13     2.54    2.07
  2.39   2.51  2.35   2.75   2.27     2.81    2.24

The overhead is 6% ~ 11%.

It's because when a trace event is enabled 3 tracepoints (sched_switch,
sched_wakeup, sched_wakeup_new) will be activated to map pid to cmdname.

We'd like to avoid this overhead, so add a trace option '(no)record-cmd'
to allow to disable cmdline recording.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4C2D57F4.2050204@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      e870e9a1
  5. 29 6月, 2010 1 次提交
  7. 09 6月, 2010 1 次提交
  9. 21 5月, 2010 2 次提交
  11. 19 5月, 2010 1 次提交
  13. 15 5月, 2010 8 次提交
    • S
      tracing: Comment the use of event_mutex with trace event flags · 1eaa4787
      由 Steven Rostedt 提交于 
      The flags variable is protected by the event_mutex when modifying,
but the event_mutex is not held when reading the variable.

This is due to the fact that the reads occur in critical sections where
taking a mutex (or even a spinlock) is not wanted.

But the two flags that exist (enable and filter_active) have the code
written as such to handle the reads to not need a lock.

The enable flag is used just to know if the event is enabled or not
and its use is always under the event_mutex. Whether or not the event
is actually enabled is really determined by the tracepoint being
registered. The flag is just a way to let the code know if the tracepoint
is registered.

The filter_active is different. It is read without the lock. If it
is set, then the event probes jump to the filter code. There can be a
slight mismatch between filters available and filter_active. If the flag is
set but no filters are available, the code safely jumps to a filter nop.
If the flag is not set and the filters are available, then the filters
are skipped. This is acceptable since filters are usually set before
tracing or they are set by humans, which would not notice the slight
delay that this causes.

v2: Fixed typo: "cacheing" -> "caching"
Reported-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      1eaa4787
    • S
      tracing: Combine event filter_active and enable into single flags field · 553552ce
      由 Steven Rostedt 提交于 
      The filter_active and enable both use an int (4 bytes each) to
set a single flag. We can save 4 bytes per event by combining the
two into a single integer.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4894944	1018052	 861512	6774508	 675eec	vmlinux.id
4894871	1012292	 861512	6768675	 674823	vmlinux.flags

This gives us another 5K in savings.

The modification of both the enable and filter fields are done
under the event_mutex, so it is still safe to combine the two.

Note: Although Mathieu gave his Acked-by, he would like it documented
 that the reads of flags are not protected by the mutex. The way the
 code works, these reads will not break anything, but will have a
 residual effect. Since this behavior is the same even before this
 patch, describing this situation is left to another patch, as this
 patch does not change the behavior, but just brought it to Mathieu's
 attention.

v2: Updated the event trace self test to for this change.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      553552ce
    • S
      tracing: Remove duplicate id information in event structure · 32c0edae
      由 Steven Rostedt 提交于 
      Now that the trace_event structure is embedded in the ftrace_event_call
structure, there is no need for the ftrace_event_call id field.
The id field is the same as the trace_event type field.

Removing the id and re-arranging the structure brings down the tracepoint
footprint by another 5K.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4895024	1023812	 861512	6780348	 6775bc	vmlinux.print
4894944	1018052	 861512	6774508	 675eec	vmlinux.id
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      32c0edae
    • S
      tracing: Move print functions into event class · 80decc70
      由 Steven Rostedt 提交于 
      Currently, every event has its own trace_event structure. This is
fine since the structure is needed anyway. But the print function
structure (trace_event_functions) is now separate. Since the output
of the trace event is done by the class (with the exception of events
defined by DEFINE_EVENT_PRINT), it makes sense to have the class
define the print functions that all events in the class can use.

This makes a bigger deal with the syscall events since all syscall events
use the same class. The savings here is another 30K.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init
4900446	1049028	 861512	6810986	 67ed6a	vmlinux.preprint
4895024	1023812	 861512	6780348	 6775bc	vmlinux.print

To accomplish this, and to let the class know what event is being
printed, the event structure is embedded in the ftrace_event_call
structure. This should not be an issues since the event structure
was created for each event anyway.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      80decc70
    • S
      tracing: Allow events to share their print functions · a9a57763
      由 Steven Rostedt 提交于 
      Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.

The event itself is now passed to the print function to let the print
function know what kind of event it should print.

This opens the door to consolidating the way several events print
their output.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init
4900446	1049028	 861512	6810986	 67ed6a	vmlinux.preprint

This change slightly increases the size but is needed for the next change.

v3: Fix the branch tracer events to handle this change.

v2: Fix the new function graph tracer event calls to handle this change.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      a9a57763
    • S
      tracing: Move raw_init from events to class · 0405ab80
      由 Steven Rostedt 提交于 
      The raw_init function pointer in the event is used to initialize
various kinds of events. The type of initialization needed is usually
classed to the kind of event it is.

Two events with the same class will always have the same initialization
function, so it makes sense to move this to the class structure.

Perhaps even making a special system structure would work since
the initialization is the same for all events within a system.
But since there's no system structure (yet), this will just move it
to the class.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900375	1053380	 861512	6815267	 67fe23	vmlinux.fields
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init

The text grew very slightly, but this is a constant growth that happened
with the changing of the C files that call the init code.
The bigger savings is the data which will be saved the more events share
a class.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      0405ab80
    • S
      tracing: Move fields from event to class structure · 2e33af02
      由 Steven Rostedt 提交于 
      Move the defined fields from the event to the class structure.
Since the fields of the event are defined by the class they belong
to, it makes sense to have the class hold the information instead
of the individual events. The events of the same class would just
hold duplicate information.

After this change the size of the kernel dropped another 3K:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900252	1057412	 861512	6819176	 680d68	vmlinux.regs
4900375	1053380	 861512	6815267	 67fe23	vmlinux.fields

Although the text increased, this was mainly due to the C files
having to adapt to the change. This is a constant increase, where
new tracepoints will not increase the Text. But the big drop is
in the data size (as well as needed allocations to hold the fields).
This will give even more savings as more tracepoints are created.

Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS()
with several DEFINE_EVENT()s, then the savings will be lost. But
we are pushing developers to consolidate events with DEFINE_EVENT()
so this should not be an issue.

The kprobes define a unique class to every new event, but are dynamic
so it should not be a issue.

The syscalls however have a single class but the fields for the individual
events are different. The syscalls use a metadata to define the
fields. I moved the fields list from the event to the metadata and
added a "get_fields()" function to the class. This function is used
to find the fields. For normal events and kprobes, get_fields() just
returns a pointer to the fields list_head in the class. For syscall
events, it returns the fields list_head in the metadata for the event.

v2:  Fixed the syscall fields. The syscall metadata needs a list
     of fields for both enter and exit.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      2e33af02
    • S
      tracing: Remove per event trace registering · 2239291a
      由 Steven Rostedt 提交于 
      This patch removes the register functions of TRACE_EVENT() to enable
and disable tracepoints. The registering of a event is now down
directly in the trace_events.c file. The tracepoint_probe_register()
is now called directly.

The prototypes are no longer type checked, but this should not be
an issue since the tracepoints are created automatically by the
macros. If a prototype is incorrect in the TRACE_EVENT() macro, then
other macros will catch it.

The trace_event_class structure now holds the probes to be called
by the callbacks. This removes needing to have each event have
a separate pointer for the probe.

To handle kprobes and syscalls, since they register probes in a
different manner, a "reg" field is added to the ftrace_event_class
structure. If the "reg" field is assigned, then it will be called for
enabling and disabling of the probe for either ftrace or perf. To let
the reg function know what is happening, a new enum (trace_reg) is
created that has the type of control that is needed.

With this new rework, the 82 kernel events and 618 syscall events
has their footprint dramatically lowered:

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4914025	1088868	 861512	6864405	 68be15	vmlinux.class
4918492	1084612	 861512	6864616	 68bee8	vmlinux.tracepoint
4900252	1057412	 861512	6819176	 680d68	vmlinux.regs

The size went from 6863829 to 6819176, that's a total of 44K
in savings. With tracepoints being continuously added, this is
critical that the footprint becomes minimal.

v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf
    specific structure in trace_events.c.

v4: Fixed trace self tests to check probe because regfunc no longer
    exists.

v3: Updated to handle void *data in beginning of probe parameters.
    Also added the tracepoint: check_trace_callback_type_##call().

v2: Changed the callback probes to pass void * and typecast the
    value within the function.
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      2239291a
  15. 14 5月, 2010 1 次提交
  17. 01 5月, 2010 1 次提交
  19. 01 4月, 2010 1 次提交
    • S
      tracing: Show the lost events in the trace_pipe output · bc21b478
      由 Steven Rostedt 提交于 
      Now that the ring buffer can keep track of where events are lost.
Use this information to the output of trace_pipe:

       hackbench-3588  [001]  1326.701660: lock_acquire: ffffffff816591e0 read rcu_read_lock
       hackbench-3588  [001]  1326.701661: lock_acquire: ffff88003f4091f0 &(&dentry->d_lock)->rlock
       hackbench-3588  [001]  1326.701664: lock_release: ffff88003f4091f0 &(&dentry->d_lock)->rlock
CPU:1 [LOST 673 EVENTS]
       hackbench-3588  [001]  1326.702711: kmem_cache_free: call_site=ffffffff81102b85 ptr=ffff880026d96738
       hackbench-3588  [001]  1326.702712: lock_release: ffff88003e1480a8 &mm->mmap_sem
       hackbench-3588  [001]  1326.702713: lock_acquire: ffff88003e1480a8 &mm->mmap_sem

Even works with the function graph tracer:

 2) ! 170.098 us  |                                            }
 2)   4.036 us    |                                            rcu_irq_exit();
 2)   3.657 us    |                                            idle_cpu();
 2) ! 190.301 us  |                                          }
CPU:2 [LOST 2196 EVENTS]
 2)   0.853 us    |                            } /* cancel_dirty_page */
 2)               |                            remove_from_page_cache() {
 2)   1.578 us    |                              _raw_spin_lock_irq();
 2)               |                              __remove_from_page_cache() {

Note, it does not work with the iterator "trace" file, since it requires
the use of consuming the page from the ring buffer to determine how many
events were lost, which the iterator does not do.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      bc21b478
  21. 10 3月, 2010 2 次提交
    • F
      perf: Drop the obsolete profile naming for trace events · 97d5a220
      由 Frederic Weisbecker 提交于 
      Drop the obsolete "profile" naming used by perf for trace events.
Perf can now do more than simple events counting, so generalize
the API naming.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
      97d5a220
    • F
      perf: Take a hot regs snapshot for trace events · c530665c
      由 Frederic Weisbecker 提交于 
      We are taking a wrong regs snapshot when a trace event triggers.
Either we use get_irq_regs(), which gives us the interrupted
registers if we are in an interrupt, or we use task_pt_regs()
which gives us the state before we entered the kernel, assuming
we are lucky enough to be no kernel thread, in which case
task_pt_regs() returns the initial set of regs when the kernel
thread was started.

What we want is different. We need a hot snapshot of the regs,
so that we can get the instruction pointer to record in the
sample, the frame pointer for the callchain, and some other
things.

Let's use the new perf_fetch_caller_regs() for that.

Comparison with perf record -e lock: -R -a -f -g
Before:

        perf  [kernel]                   [k] __do_softirq
               |
               --- __do_softirq
                  |
                  |--55.16%-- __open
                  |
                   --44.84%-- __write_nocancel

After:

            perf  [kernel]           [k] perf_tp_event
               |
               --- perf_tp_event
                  |
                  |--41.07%-- lock_acquire
                  |          |
                  |          |--39.36%-- _raw_spin_lock
                  |          |          |
                  |          |          |--7.81%-- hrtimer_interrupt
                  |          |          |          smp_apic_timer_interrupt
                  |          |          |          apic_timer_interrupt

The old case was producing unreliable callchains. Now having
right frame and instruction pointers, we have the trace we
want.

Also syscalls and kprobe events already have the right regs,
let's use them instead of wasting a retrieval.

v2: Follow the rename perf_save_regs() -> perf_fetch_caller_regs()
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Archs <linux-arch@vger.kernel.org>
      c530665c
  23. 29 1月, 2010 1 次提交
    • X
      perf: Factorize trace events raw sample buffer operations · 430ad5a6
      由 Xiao Guangrong 提交于 
      Introduce ftrace_perf_buf_prepare() and ftrace_perf_buf_submit() to
gather the common code that operates on raw events sampling buffer.
This cleans up redundant code between regular trace events, syscall
events and kprobe events.

Changelog v1->v2:
- Rename function name as per Masami and Frederic's suggestion
- Add __kprobes for ftrace_perf_buf_prepare() and make
  ftrace_perf_buf_submit() inline as per Masami's suggestion
- Export ftrace_perf_buf_prepare since modules will use it
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B60E92D.9000808@cn.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      430ad5a6
  25. 07 1月, 2010 2 次提交
    • L
      tracing: Remove show_format and related macros from TRACE_EVENT · 0fa0edaf
      由 Lai Jiangshan 提交于 
      The previous patches added the use of print_fmt string and changes
the trace_define_field() function to also create the fields and
format output for the event format files.

   text	   data	    bss	    dec	    hex	filename
5857201	1355780	9336808	16549789	 fc879d	vmlinux
5884589	1351684	9337896	16574169	 fce6d9	vmlinux-orig

The above shows the size of the vmlinux after this patch set
compared to the vmlinux-orig which is before the patch set.

This saves us 27k on text, 1k on bss and adds just 4k of data.

The total savings of 24k in size.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D4D.40604@cn.fujitsu.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      0fa0edaf
    • L
      tracing: Add print_fmt field · 509e760c
      由 Lai Jiangshan 提交于 
      This is part of a patch set that removes the show_format method
in the ftrace event macros.

The print_fmt field is added to hold the string that shows
the print_fmt in the event format files. This patch only adds
the field but it is currently not used. Later patches will use
this field to enable us to remove the show_format field
and function.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D3E.2000704@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      509e760c
  27. 28 12月, 2009 1 次提交
    • L
      perf events: Remove CONFIG_EVENT_PROFILE · 07b139c8
      由 Li Zefan 提交于 
      Quoted from Ingo:

| This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE -
| it's an unnecessary Kconfig complication. If both PERF_EVENTS and
| EVENT_TRACING is enabled we should expose generic tracepoints.
|
| Nor is it limited to event 'profiling', so it has become a misnomer as
| well.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      07b139c8
  29. 14 12月, 2009 3 次提交
  31. 10 12月, 2009 1 次提交
    • S
      tracing: Buffer the output of seq_file in case of filled buffer · a63ce5b3
      由 Steven Rostedt 提交于 
      If the seq_read fills the buffer it will call s_start again on the next
itertation with the same position. This causes a problem with the
function_graph tracer because it consumes the iteration in order to
determine leaf functions.

What happens is that the iterator stores the entry, and the function
graph plugin will look at the next entry. If that next entry is a return
of the same function and task, then the function is a leaf and the
function_graph plugin calls ring_buffer_read which moves the ring buffer
iterator forward (the trace iterator still points to the function start
entry).

The copying of the trace_seq to the seq_file buffer will fail if the
seq_file buffer is full. The seq_read will not show this entry.
The next read by userspace will cause seq_read to again call s_start
which will reuse the trace iterator entry (the function start entry).
But the function return entry was already consumed. The function graph
plugin will think that this entry is a nested function and not a leaf.

To solve this, the trace code now checks the return status of the
seq_printf (trace_print_seq). If the writing to the seq_file buffer
fails, we set a flag in the iterator (leftover) and we do not reset
the trace_seq buffer. On the next call to s_start, we check the leftover
flag, and if it is set, we just reuse the trace_seq buffer and do not
call into the plugin print functions.

Before this patch:

 2)               |      fput() {
 2)               |        __fput() {
 2)   0.550 us    |          inotify_inode_queue_event();
 2)               |          __fsnotify_parent() {
 2)   0.540 us    |          inotify_dentry_parent_queue_event();

After the patch:

 2)               |      fput() {
 2)               |        __fput() {
 2)   0.550 us    |          inotify_inode_queue_event();
 2)   0.548 us    |          __fsnotify_parent();
 2)   0.540 us    |          inotify_dentry_parent_queue_event();

[
  Updated the patch to fix a missing return 0 from the trace_print_seq()
  stub when CONFIG_TRACING is disabled.
Reported-by: NIngo Molnar <mingo@elte.hu>
]
Reported-by: NJiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      a63ce5b3
  33. 22 11月, 2009 1 次提交
    • F
      tracing: Use the perf recursion protection from trace event · ce71b9df
      由 Frederic Weisbecker 提交于 
      When we commit a trace to perf, we first check if we are
recursing in the same buffer so that we don't mess-up the buffer
with a recursing trace. But later on, we do the same check from
perf to avoid commit recursion. The recursion check is desired
early before we touch the buffer but we want to do this check
only once.

Then export the recursion protection from perf and use it from
the trace events before submitting a trace.

v2: Put appropriate Reported-by tag
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ce71b9df
  35. 08 11月, 2009 1 次提交
    • F
      tracing, perf_events: Protect the buffer from recursion in perf · 444a2a3b
      由 Frederic Weisbecker 提交于 
      While tracing using events with perf, if one enables the
lockdep:lock_acquire event, it will infect every other perf
trace events.

Basically, you can enable whatever set of trace events through
perf but if this event is part of the set, the only result we
can get is a long list of lock_acquire events of rcu read lock,
and only that.

This is because of a recursion inside perf.

1) When a trace event is triggered, it will fill a per cpu
   buffer and submit it to perf.

2) Perf will commit this event but will also protect some data
   using rcu_read_lock

3) A recursion appears: rcu_read_lock triggers a lock_acquire
   event that will fill the per cpu event and then submit the
   buffer to perf.

4) Perf detects a recursion and ignores it

5) Perf continues its work on the previous event, but its buffer
   has been overwritten by the lock_acquire event, it has then
   been turned into a lock_acquire event of rcu read lock

Such scenario also happens with lock_release with
rcu_read_unlock().

We could turn the rcu_read_lock() into __rcu_read_lock() to drop
the lock debugging from perf fast path, but that would make us
lose the rcu debugging and that doesn't prevent from other
possible kind of recursion from perf in the future.

This patch adds a recursion protection based on a counter on the
perf trace per cpu buffers to solve the problem.

-v2: Fixed lost whitespace, added reviewed-by tag
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1257477185-7838-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      444a2a3b
  37. 15 10月, 2009 1 次提交
  39. 18 9月, 2009 2 次提交
    • F
      tracing: Allocate the ftrace event profile buffer dynamically · 20ab4425
      由 Frederic Weisbecker 提交于 
      Currently the trace event profile buffer is allocated in the stack. But
this may be too much for the stack, as the events can have large
statically defined field size and can also grow with dynamic arrays.

Allocate two per cpu buffer for all profiled events. The first cpu
buffer is used to host every non-nmi context traces. It is protected
by disabling the interrupts while writing and committing the trace.

The second buffer is reserved for nmi. So that there is no race between
them and the first buffer.

The whole write/commit section is rcu protected because we release
these buffers while deactivating the last profiling trace event.

v2: Move the buffers from trace_event to be global, as pointed by
    Steven Rostedt.

v3: Fix the syscall events to handle the profiling buffer races
    by disabling interrupts, now that the buffers are globals.
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
      20ab4425
    • F
      tracing: Factorize the events profile accounting · e5e25cf4
      由 Frederic Weisbecker 提交于 
      Factorize the events enabling accounting in a common tracing core
helper. This reduces the size of the profile_enable() and
profile_disable() callbacks for each trace events.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
      e5e25cf4
  41. 13 9月, 2009 1 次提交
  43. 12 9月, 2009 1 次提交
    • S
      tracing: add lock depth to entries · 637e7e86
      由 Steven Rostedt 提交于 
      This patch adds the lock depth of the big kernel lock to the generic
entry header. This way we can see the depth of the lock and help
in removing the BKL.

Example:

 #                  _------=> CPU#
 #                 / _-----=> irqs-off
 #                | / _----=> need-resched
 #                || / _---=> hardirq/softirq
 #                ||| / _--=> preempt-depth
 #                |||| /_--=> lock-depth
 #                |||||/     delay
 #  cmd     pid   |||||| time  |   caller
 #     \   /      ||||||   \   |   /
   <idle>-0       2.N..3 5902255250us+: lock_acquire: read rcu_read_lock
   <idle>-0       2.N..3 5902255253us+: lock_release: rcu_read_lock
   <idle>-0       2dN..3 5902255257us+: lock_acquire: xtime_lock
   <idle>-0       2dN..4 5902255259us : lock_acquire: clocksource_lock
   <idle>-0       2dN..4 5902255261us+: lock_release: clocksource_lock
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      637e7e86
  45. 11 9月, 2009 1 次提交
  47. 05 9月, 2009 1 次提交
    • S
      tracing: pass around ring buffer instead of tracer · e77405ad
      由 Steven Rostedt 提交于 
      The latency tracers (irqsoff and wakeup) can swap trace buffers
on the fly. If an event is happening and has reserved data on one of
the buffers, and the latency tracer swaps the global buffer with the
max buffer, the result is that the event may commit the data to the
wrong buffer.

This patch changes the API to the trace recording to be recieve the
buffer that was used to reserve a commit. Then this buffer can be passed
in to the commit.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      e77405ad
  49. 31 8月, 2009 1 次提交
    • L
      tracing/filters: Defer pred allocation · 8e254c1d
      由 Li Zefan 提交于 
      init_preds() allocates about 5392 bytes of memory (on x86_32) for
a TRACE_EVENT. With my config, at system boot total memory occupied
is:

	5392 * (642 + 15) == 3459KB

642 == cat available_events | wc -l
15 == number of dirs in events/ftrace

That's quite a lot, so we'd better defer memory allocation util
it's needed, that's when filter is used.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <4A9B8EA5.6020700@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8e254c1d
  51. 27 8月, 2009 1 次提交