- 02 3月, 2009 2 次提交
-
-
由 Pekka Paalanen 提交于
Apparently pages far into an ioremapped region might not actually be mapped during ioremap(). Add an optional read test to try to trigger a multiply faulting MMIO access. Also add more messages to the kernel log to help debugging. This patch is based on a patch suggested by Stuart Bennett <stuart@freedesktop.org> who discovered bugs in mmiotrace related to normal kernel space faults. Signed-off-by: NPekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Pekka Paalanen 提交于
Check the read values against the written values in the MMIO read/write test. This test shows if the given MMIO test area really works as memory, which is a prerequisite for a successful mmiotrace test. Signed-off-by: NPekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 2月, 2009 5 次提交
-
-
由 David Brownell 提交于
Now that the musb build fixes for DaVinci got merged (RC3?), kick in the other bits needed to get it finally *working* in mainline: - Use clk_enable()/clk_disable() ... the "always enable USB clocks" code this originally relied on has since been removed. - Initialize the USB device only after the relevant I2C GPIOs are available, so the host side can properly enable VBUS. - Tweak init sequencing to cope with mainline's relatively late init of the I2C system bus for power switches, transceivers, and so on. Sanity tested on DM6664 EVM for host and peripheral modes; that system won't boot with CONFIG_PM enabled, so OTG can't yet be tested. Also verified on OMAP3. (Unrelated: correct the MODULE_PARM_DESC spelling of musb_debug.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <me@felipebalbi.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ralf Baechle 提交于
This reverts commit 558d1de8.
-
由 Ralf Baechle 提交于
Thanks to David Daney helping with debugging and testing. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
-
由 Roel Kluin 提交于
With a postfix decrement t reaches -1 rather than 0, so the fall-back will not occur. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: mano@roarinelk.homelinux.net Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 27 2月, 2009 3 次提交
-
-
由 Paul Mundt 提交于
This change depends on some v4l changes that have been pushed back to 2.6.30, so drop this and fall back on the old soc_camera code until then. Reported-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Acked-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Benjamin Herrenschmidt 提交于
The PCI 2.x cells used on some 44x SoCs only let us configure the decode for the low 32-bit of the incoming PLB addresses. The top 4 bits (this is a 36-bit bus) are hard wired to different values depending on the specific SoC in use. Our code used to work "by accident" until I added support for the ISA memory holes and while at it added more validity checking of the addresses. This patch should bring it back to working condition. It still relies on the device-tree being correct but that's somewhat a pre-requisite for anything to work anyway. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Kyle McMartin 提交于
Now that the obvious bugs have been worked out, specifically the iwlagn issue, and the write buffer errata, DMAR should be safe to turn back on by default. (We've had it on since those patches were first written a few weeks ago, without any noticeable bug reports (most have been due to the dma-api debug patchset.)) Signed-off-by: NKyle McMartin <kyle@redhat.com> Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 2月, 2009 7 次提交
-
-
由 Mark Nelson 提交于
This fixes a regression introduced by commit a4e22f02 ("powerpc: Update 64bit __copy_tofrom_user() using CPU_FTR_UNALIGNED_LD_STD"). The same bug that existed in the 64bit memcpy() also exists here so fix it here too. The fix is the same as that applied to memcpy() with the addition of fixes for the exception handling code required for __copy_tofrom_user(). This stops us reading beyond the end of the source region we were told to copy. Signed-off-by: NMark Nelson <markn@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mark Nelson 提交于
This fixes a regression introduced by commit 25d6e2d7 ("powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD"). This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU feature bit present to do the memcpy() with unaligned load doubles. But, along with this came a bug where our final load double would read bytes beyond a page boundary and into the next (unmapped) page. This was caught by enabling CONFIG_DEBUG_PAGEALLOC, The fix was to read only the number of bytes that we need to store rather than reading a full 8-byte doubleword and storing only a portion of that. In order to minimise the amount of existing code touched we use the original do_tail for the src_unaligned case. Below is an example of the regression, as reported by Sachin Sant: Unable to handle kernel paging request for data at address 0xc00000003f380000 Faulting instruction address: 0xc000000000039574 cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020] pc: c000000000039574: .memcpy+0x74/0x244 lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3] sp: c00000003baf32a0 msr: 8000000000009032 dar: c00000003f380000 dsisr: 40000000 current = 0xc00000003e54b010 paca = 0xc000000000a53680 pid = 1840, comm = readahead enter ? for help [link register ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3] [c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3] (unreliab le) [c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3] [c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c [c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678 [c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68 [c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c [c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120 [c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3] [c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260 [c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010 [c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4 [c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4 [c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8 [c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874 [c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140 [c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38 [c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40 Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
When we introduced VSX, we changed the way FPRs are stored in the thread_struct. Unfortunately we missed the load/store float double alignment handler code when updating how we access FPRs in the thread_struct. Below fixes this and merges the little/big endian case. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Roel Kluin 提交于
vi arch/ia64/kernel/iosapic.c +142 static struct iosapic_intr_info { ... } iosapic_intr_info[NR_IRQS]; But at line 510 we have: for (i = 0; i <= NR_IRQS; i++) { s/<=/</ Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Roel Kluin 提交于
static struct { ... :114 unsigned short hash[UNW_HASH_SIZE]; ... :2152 for (index = 0; index <= UNW_HASH_SIZE; ++index) { This is a bug, isn't it? s/<=/</ Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Kyle McMartin 提交于
The previous commit which introduced the DMAR_DEFAULT_ON setting in drivers/pci/dmar.c neglected to add the ability for ia64 to enable the IOMMU by default. Rectify that mistake, doh! Signed-off-by: NKyle McMartin <kyle@redhat.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jeremy Fitzhardinge 提交于
This avoids a lockdep warning from: if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled))) return; in trace_hardirqs_on_caller(); Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 2月, 2009 3 次提交
-
-
由 Venkatesh Pallipadi 提交于
io_mapping_create_wc should take a resource_size_t parameter in place of unsigned long. With unsigned long, there will be no way to map greater than 4GB address in i386/32 bit. On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return error for such a case. Patch also adds a structure for io_mapping, that saves the base, size and type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on io_mapping_map calls. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 James Bottomley 提交于
This was changed to a physmap_t giving a clashing symbol redefinition, but actually using a physmap_t consumes rather a lot of space on x86, so stick with a private copy renamed with a voyager_ prefix and made static. Nothing outside of the Voyager code uses it, anyway. Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Russell King 提交于
Add the necessary i2c_board_info structure to fix the lack of PCF8583 RTC on RiscPC. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it>
-
- 23 2月, 2009 3 次提交
-
-
由 Rafael J. Wysocki 提交于
Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Right now nobody cares, but the suspend/resume code will eventually want to suspend device interrupts without suspending the timer, and will depend on this flag to know. The modern x86 timer infrastructure uses the local APIC timers and never shows up as a device interrupt at all, so it isn't affected and doesn't need any of this. Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 2月, 2009 2 次提交
-
-
由 Jiri Slaby 提交于
As acpi_enter_sleep_state can fail, take this into account in do_suspend_lowlevel and don't return to the do_suspend_lowlevel's caller. This would break (currently) fpu status and preempt count. Technically, this means use `call' instead of `jmp' and `jmp' to the `resume_point' after the `call' (i.e. if acpi_enter_sleep_state returns=fails). `resume_point' will handle the restore of fpu and preempt count gracefully. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Jiri Slaby 提交于
- remove %ds re-set, it's already set in wakeup_long64 - remove double labels and alignment (ENTRY already adds both) - use meaningful resume point labelname - skip alignment while jumping from wakeup_long64 to the resume point - remove .size, .type and unused labels [v2] - added ENDPROCs Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Acked-by: NCyrill Gorcunov <gorcunov@openvz.org> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 21 2月, 2009 4 次提交
-
-
由 H. Peter Anvin 提交于
Impact: Bug fix on UP Checkin 6ec68bff: x86, mce: reinitialize per cpu features on resume introduced a call to mce_cpu_features() in the resume path, in order for the MCE machinery to get properly reinitialized after a resume. However, this function (and its successors) was flagged __cpuinit, which becomes __init on UP configurations (on SMP suspend/resume requires CPU hotplug and so this would not be seen.) Remove the offending __cpuinit annotations for mce_cpu_features() and its successor functions. Cc: Andi Kleen <ak@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Wei Yongjun 提交于
Fix the typo && -> ||. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
oprofile for MN10300 seems to have been broken by the advent of the new tracing framework. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Luca Bigliardi 提交于
* Replace kmalloc() with uml_kmalloc() (fix build failure) * Remove unnecessary UM_KERN_INFO in printk() (don't display '<6>' while printing info) Signed-off-by: NLuca Bigliardi <shammash@artha.org> Cc: Jiri Kosina <jkosina@suse.cz> Reviewed-by: NWANG Cong <wangcong@zeuux.org> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 2月, 2009 9 次提交
-
-
由 Ingo Molnar 提交于
Steven Rostedt found a bug in where in his modified kernel ftrace was unable to modify the kernel text, due to the PMD itself having been marked read-only as well in split_large_page(). The fix, suggested by Linus, is to not try to 'clone' the reference protection of a huge-page, but to use the standard (and permissive) page protection bits of KERNPG_TABLE. The 'cloning' makes sense for the ptes but it's a confused and incorrect concept at the page table level - because the pagetable entry is a set of all ptes and hence cannot 'clone' any single protection attribute - the ptes can be any mixture of protections. With the permissive KERNPG_TABLE, even if the pte protections get changed after this point (due to ftrace doing code-patching or other similar activities like kprobes), the resulting combined protections will still be correct and the pte's restrictive (or permissive) protections will control it. Also update the comment. This bug was there for a long time but has not caused visible problems before as it needs a rather large read-only area to trigger. Steve possibly hacked his kernel with some really large arrays or so. Anyway, the bug is definitely worth fixing. [ Huang Ying also experienced problems in this area when writing the EFI code, but the real bug in split_large_page() was not realized back then. ] Reported-by: NSteven Rostedt <rostedt@goodmis.org> Reported-by: NHuang Ying <ying.huang@intel.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alok N Kataria 提交于
Impact: fix time warps under vmware Similar to the check for TSC going backwards in the TSC clocksource, we also need this check for VMI clocksource. Signed-off-by: NAlok N Kataria <akataria@vmware.com> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: stable@kernel.org
-
由 Tony Luck 提交于
arch/ia64/xen/xen_pv_ops.c:156: error: xen_init_ops causes a section type conflict arch/ia64/xen/xen_pv_ops.c:340: error: xen_iosapic_ops causes a section type conflict Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Isaku Yamahata 提交于
This patch fixes xen related Kconfigs and add default config file for ia64 xen domU. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NTony Luck <aegl@agluck-desktop.(none)>
-
由 Alex Chiang 提交于
The second call to cpu_clear() is redundant, as we've already removed the CPU from cpu_online_map before calling migrate_platform_irqs(). Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NTony Luck <aegl@agluck-desktop.(none)>
-
由 Alex Chiang 提交于
This reverts commit e7b14036. Commit e7b14036 removes the targetted disabled CPU from the cpu_online_map after calls to migrate_platform_irqs and fixup_irqs. Paul McKenney states that the reasoning behind the patch was to prevent irq handlers from running on CPUs marked offline because: RCU happily ignores CPUs that don't have their bits set in cpu_online_map, so if there are RCU read-side critical sections in the irq handlers being run, RCU will ignore them. If the other CPUs were running, they might sequence through the RCU state machine, which could result in data structures being yanked out from under those irq handlers, which in turn could result in oopses or worse. Unfortunately, both ia64 functions above look at cpu_online_map to find a new CPU to migrate interrupts onto. This means we can potentially migrate an interrupt off ourself back to... ourself. Uh oh. This causes an oops when we finally try to process pending interrupts on the CPU we want to disable. The oops results from calling __do_IRQ with a NULL pt_regs: Unable to handle kernel NULL pointer dereference (address 0000000000000040) Call Trace: [<a000000100016930>] show_stack+0x50/0xa0 sp=e0000009c922fa00 bsp=e0000009c92214d0 [<a0000001000171a0>] show_regs+0x820/0x860 sp=e0000009c922fbd0 bsp=e0000009c9221478 [<a00000010003c700>] die+0x1a0/0x2e0 sp=e0000009c922fbd0 bsp=e0000009c9221438 [<a0000001006e92f0>] ia64_do_page_fault+0x950/0xa80 sp=e0000009c922fbd0 bsp=e0000009c92213d8 [<a00000010000c7a0>] ia64_native_leave_kernel+0x0/0x270 sp=e0000009c922fc60 bsp=e0000009c92213d8 [<a0000001000ecdb0>] profile_tick+0xd0/0x1c0 sp=e0000009c922fe30 bsp=e0000009c9221398 [<a00000010003bb90>] timer_interrupt+0x170/0x3e0 sp=e0000009c922fe30 bsp=e0000009c9221330 [<a00000010013a800>] handle_IRQ_event+0x80/0x120 sp=e0000009c922fe30 bsp=e0000009c92212f8 [<a00000010013aa00>] __do_IRQ+0x160/0x4a0 sp=e0000009c922fe30 bsp=e0000009c9221290 [<a000000100012290>] ia64_process_pending_intr+0x2b0/0x360 sp=e0000009c922fe30 bsp=e0000009c9221208 [<a0000001000112d0>] fixup_irqs+0xf0/0x2a0 sp=e0000009c922fe30 bsp=e0000009c92211a8 [<a00000010005bd80>] __cpu_disable+0x140/0x240 sp=e0000009c922fe30 bsp=e0000009c9221168 [<a0000001006c5870>] take_cpu_down+0x50/0xa0 sp=e0000009c922fe30 bsp=e0000009c9221148 [<a000000100122610>] stop_cpu+0xd0/0x200 sp=e0000009c922fe30 bsp=e0000009c92210f0 [<a0000001000e0440>] kthread+0xc0/0x140 sp=e0000009c922fe30 bsp=e0000009c92210c8 [<a000000100014ab0>] kernel_thread_helper+0xd0/0x100 sp=e0000009c922fe30 bsp=e0000009c92210a0 [<a00000010000a4c0>] start_kernel_thread+0x20/0x40 sp=e0000009c922fe30 bsp=e0000009c92210a0 I don't like this revert because it is fragile. ia64 is getting lucky because we seem to only ever process timer interrupts in this path, but if we ever race with an IPI here, we definitely use RCU and have the potential of hitting an oops that Paul describes above. Patching ia64's timer_interrupt() to check for NULL pt_regs is insufficient though, as we still hit the above oops. As a short term solution, I do think that this revert is the right answer. The revert hold up under repeated testing (24+ hour test runs) with this setup: - 8-way rx6600 - randomly toggling CPU online/offline state every 2 seconds - running CPU exercisers, memory hog, disk exercisers, and network stressors - average system load around ~160 In the long term, we really need to figure out why we set pt_regs = NULL in ia64_process_pending_intr(). If it turns out that it is unnecessary to do so, then we could safely re-introduce e7b14036 (along with some other logic to be smarter about migrating interrupts). One final note: x86 also removes the disabled CPU from cpu_online_map and then re-enables interrupts for 1ms, presumably to handle any pending interrupts: arch/x86/kernel/irq_32.c (and irq_64.c): cpu_disable_common: [remove cpu from cpu_online_map] fixup_irqs(): for_each_irq: [break CPU affinities] local_irq_enable(); mdelay(1); local_irq_disable(); So they are doing implicitly what ia64 is doing explicitly. Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NTony Luck <aegl@agluck-desktop.(none)>
-
由 Robin Holt 提交于
BTE_MAX_XFER is wrong. It is one greater than the number of cache lines the BTE is actually able to transfer. If you request a transfer of exactly BTE_MAX_XFER size, you trip a very cryptic BUG_ON() which should certainly be made more clear. This patch fixes that constant and also cleans up the BUG_ON()s in arch/ia64/sn/kernel/bte.c to test one condition per line. Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NTony Luck <aegl@agluck-desktop.(none)>
-
由 Tony Luck 提交于
ia64 only defines __early_pfn_to_nid() for SPARSEMEM && NUMA configurations, so the recent: commit: f2dbcfa7 mm: clean up for early_pfn_to_nid() ends up with some link problems for certain configuration files. Fix arch/ia64/Kconfig to only define HAVE_ARCH_EARLY_PFN_TO_NID in the cases where we do provide this function. Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Hartley Sweeten 提交于
Remove the gesbc9312.h header since it is unused. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 2月, 2009 2 次提交
-
-
由 Makito SHIOKAWA 提交于
READ_IMPLIES_EXEC must be set when: o binary _is_ an executable stack (i.e. not EXSTACK_DISABLE_X) o processor architecture is _under_ ARMv6 (XN bit is supported from ARMv6) Signed-off-by: NMakito SHIOKAWA <lkhmkt@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Heiko Carstens 提交于
Standby memory detected with the sclp interface gets always registered with add_memory calls without considering the limitationt that the "mem=" kernel paramater implies. So fix this and only register standby memory that is below the specified limit. This fixes zfcpdump since it uses "mem=32M". In case there is appr. 2GB standby memory present all of usable memory would be used for the struct pages needed for standby memory. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-