1. 25 7月, 2008 3 次提交
    • U
      flag parameters: NONBLOCK in signalfd · 5fb5e049
      Ulrich Drepper 提交于
      This patch adds support for the SFD_NONBLOCK flag to signalfd4.  The
      additional changes needed are minimal.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <signal.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_signalfd4
      # ifdef __x86_64__
      #  define __NR_signalfd4 289
      # elif defined __i386__
      #  define __NR_signalfd4 327
      # else
      #  error "need __NR_signalfd4"
      # endif
      #endif
      
      #define SFD_NONBLOCK O_NONBLOCK
      
      int
      main (void)
      {
        sigset_t ss;
        sigemptyset (&ss);
        sigaddset (&ss, SIGUSR1);
        int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
        if (fd == -1)
          {
            puts ("signalfd4(0) failed");
            return 1;
          }
        int fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (fl & O_NONBLOCK)
          {
            puts ("signalfd4(0) set non-blocking mode");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_NONBLOCK);
        if (fd == -1)
          {
            puts ("signalfd4(SFD_NONBLOCK) failed");
            return 1;
          }
        fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((fl & O_NONBLOCK) == 0)
          {
            puts ("signalfd4(SFD_NONBLOCK) does not set non-blocking mode");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: NUlrich Drepper <drepper@redhat.com>
      Acked-by: NDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5fb5e049
    • U
      flag parameters: signalfd · 9deb27ba
      Ulrich Drepper 提交于
      This patch adds the new signalfd4 syscall.  It extends the old signalfd
      syscall by one parameter which is meant to hold a flag value.  In this
      patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
      flag for the returned file descriptor to be set.
      
      A new name SFD_CLOEXEC is introduced which in this implementation must
      have the same value as O_CLOEXEC.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <signal.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_signalfd4
      # ifdef __x86_64__
      #  define __NR_signalfd4 289
      # elif defined __i386__
      #  define __NR_signalfd4 327
      # else
      #  error "need __NR_signalfd4"
      # endif
      #endif
      
      #define SFD_CLOEXEC O_CLOEXEC
      
      int
      main (void)
      {
        sigset_t ss;
        sigemptyset (&ss);
        sigaddset (&ss, SIGUSR1);
        int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
        if (fd == -1)
          {
            puts ("signalfd4(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("signalfd4(0) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
        if (fd == -1)
          {
            puts ("signalfd4(SFD_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      
      [akpm@linux-foundation.org: add sys_ni stub]
      Signed-off-by: NUlrich Drepper <drepper@redhat.com>
      Acked-by: NDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9deb27ba
    • U
      flag parameters: anon_inode_getfd extension · 7d9dbca3
      Ulrich Drepper 提交于
      This patch just extends the anon_inode_getfd interface to take an additional
      parameter with a flag value.  The flag value is passed on to
      get_unused_fd_flags in anticipation for a use with the O_CLOEXEC flag.
      
      No actual semantic changes here, the changed callers all pass 0 for now.
      
      [akpm@linux-foundation.org: KVM fix]
      Signed-off-by: NUlrich Drepper <drepper@redhat.com>
      Acked-by: NDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7d9dbca3
  2. 02 5月, 2008 1 次提交
    • A
      [PATCH] sanitize anon_inode_getfd() · 2030a42c
      Al Viro 提交于
      a) none of the callers even looks at inode or file returned by anon_inode_getfd()
      b) any caller that would try to look at those would be racy, since by the time
      it returns we might have raced with close() from another thread and that
      file would be pining for fjords.
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      2030a42c
  3. 11 4月, 2008 1 次提交
  4. 07 2月, 2008 1 次提交
  5. 03 2月, 2008 1 次提交
  6. 17 10月, 2007 1 次提交
  7. 21 9月, 2007 1 次提交
    • D
      signalfd simplification · b8fceee1
      Davide Libenzi 提交于
      This simplifies signalfd code, by avoiding it to remain attached to the
      sighand during its lifetime.
      
      In this way, the signalfd remain attached to the sighand only during
      poll(2) (and select and epoll) and read(2).  This also allows to remove
      all the custom "tsk == current" checks in kernel/signal.c, since
      dequeue_signal() will only be called by "current".
      
      I think this is also what Ben was suggesting time ago.
      
      The external effect of this, is that a thread can extract only its own
      private signals and the group ones.  I think this is an acceptable
      behaviour, in that those are the signals the thread would be able to
      fetch w/out signalfd.
      Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b8fceee1
  8. 23 8月, 2007 1 次提交
    • O
      signalfd: make it group-wide, fix posix-timers scheduling · f9ee228b
      Oleg Nesterov 提交于
      With this patch any thread can dequeue its own private signals via signalfd,
      even if it was created by another sub-thread.
      
      To do so, we pass "current" to dequeue_signal() if the caller is from the same
      thread group. This also fixes the scheduling of posix timers broken by the
      previous patch.
      
      If the caller doesn't belong to this thread group, we can't handle __SI_TIMER
      case properly anyway. Perhaps we should forbid the cross-process signalfd usage
      and convert ctx->tsk to ctx->sighand.
      Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Davide Libenzi <davidel@xmailserver.org>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Michael Kerrisk <mtk-manpages@gmx.net>
      Cc: Roland McGrath <roland@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: <stable@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f9ee228b
  9. 27 7月, 2007 1 次提交
  10. 29 6月, 2007 1 次提交
  11. 24 5月, 2007 1 次提交
  12. 11 5月, 2007 1 次提交
    • D
      signal/timer/event: signalfd core · fba2afaa
      Davide Libenzi 提交于
      This patch series implements the new signalfd() system call.
      
      I took part of the original Linus code (and you know how badly it can be
      broken :), and I added even more breakage ;) Signals are fetched from the same
      signal queue used by the process, so signalfd will compete with standard
      kernel delivery in dequeue_signal().  If you want to reliably fetch signals on
      the signalfd file, you need to block them with sigprocmask(SIG_BLOCK).  This
      seems to be working fine on my Dual Opteron machine.  I made a quick test
      program for it:
      
      http://www.xmailserver.org/signafd-test.c
      
      The signalfd() system call implements signal delivery into a file descriptor
      receiver.  The signalfd file descriptor if created with the following API:
      
      int signalfd(int ufd, const sigset_t *mask, size_t masksize);
      
      The "ufd" parameter allows to change an existing signalfd sigmask, w/out going
      to close/create cycle (Linus idea).  Use "ufd" == -1 if you want a brand new
      signalfd file.
      
      The "mask" allows to specify the signal mask of signals that we are interested
      in.  The "masksize" parameter is the size of "mask".
      
      The signalfd fd supports the poll(2) and read(2) system calls.  The poll(2)
      will return POLLIN when signals are available to be dequeued.  As a direct
      consequence of supporting the Linux poll subsystem, the signalfd fd can use
      used together with epoll(2) too.
      
      The read(2) system call will return a "struct signalfd_siginfo" structure in
      the userspace supplied buffer.  The return value is the number of bytes copied
      in the supplied buffer, or -1 in case of error.  The read(2) call can also
      return 0, in case the sighand structure to which the signalfd was attached,
      has been orphaned.  The O_NONBLOCK flag is also supported, and read(2) will
      return -EAGAIN in case no signal is available.
      
      If the size of the buffer passed to read(2) is lower than sizeof(struct
      signalfd_siginfo), -EINVAL is returned.  A read from the signalfd can also
      return -ERESTARTSYS in case a signal hits the process.  The format of the
      struct signalfd_siginfo is, and the valid fields depends of the (->code &
      __SI_MASK) value, in the same way a struct siginfo would:
      
      struct signalfd_siginfo {
      	__u32 signo;	/* si_signo */
      	__s32 err;	/* si_errno */
      	__s32 code;	/* si_code */
      	__u32 pid;	/* si_pid */
      	__u32 uid;	/* si_uid */
      	__s32 fd;	/* si_fd */
      	__u32 tid;	/* si_fd */
      	__u32 band;	/* si_band */
      	__u32 overrun;	/* si_overrun */
      	__u32 trapno;	/* si_trapno */
      	__s32 status;	/* si_status */
      	__s32 svint;	/* si_int */
      	__u64 svptr;	/* si_ptr */
      	__u64 utime;	/* si_utime */
      	__u64 stime;	/* si_stime */
      	__u64 addr;	/* si_addr */
      };
      
      [akpm@linux-foundation.org: fix signalfd_copyinfo() on i386]
      Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fba2afaa
新手
引导
客服 返回
顶部