Remove duplicated include.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Right now we remove MAY_WRITE/MAY_APPEND bits from mask if realfile is on
lower/. This is done as files on lower will never be written and will be
copied up. But to copy up a file, mounter should have MAY_READ permission
otherwise copy up will fail. So set MAY_READ in mask when MAY_WRITE is
reset.

Dan Walsh noticed this when he did access(lowerfile, W_OK) and it returned
True (context mounts) but when he tried to actually write to file, it
failed as mounter did not have permission on lower file.

[SzM] don't set MAY_READ if only MAY_APPEND is set without MAY_WRITE; this
won't trigger a copy-up.
Reported-by: NDan Walsh <dwalsh@redhat.com>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Right now if file is on lower/, we remove MAY_WRITE/MAY_APPEND bits from
mask as lower/ will never be written and file will be copied up. But this
is not true for special files. These files are not copied up and are opened
in place. So don't dilute the checks for these types of files.
Reported-by: NDan Walsh <dwalsh@redhat.com>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Setting POSIX ACL needs special handling:

1) Some permission checks are done by ->setxattr() which now uses mounter's
creds ("ovl: do operations on underlying file system in mounter's
context").  These permission checks need to be done with current cred as
well.

2) Setting ACL can fail for various reasons.  We do not need to copy up in
these cases.

In the mean time switch to using generic_setxattr.

[Arnd Bergmann] Fix link error without POSIX ACL. posix_acl_from_xattr()
doesn't have a 'static inline' implementation when CONFIG_FS_POSIX_ACL is
disabled, and I could not come up with an obvious way to do it.

This instead avoids the link error by defining two sets of ACL operations
and letting the compiler drop one of the two at compile time depending
on CONFIG_FS_POSIX_ACL. This avoids all references to the ACL code,
also leading to smaller code.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Inode attributes are copied up to overlay inode (uid, gid, mode, atime,
mtime, ctime) so generic code using these fields works correcty.  If a hard
link is created in overlayfs separate inodes are allocated for each link.
If chmod/chown/etc. is performed on one of the links then the inode
belonging to the other ones won't be updated.

This patch attempts to fix this by sharing inodes for hard links.

Use inode hash (with real inode pointer as a key) to make sure overlay
inodes are shared for hard links on upper.  Hard links on lower are still
split (which is not user observable until the copy-up happens, see
Documentation/filesystems/overlayfs.txt under "Non-standard behavior").

The inode is only inserted in the hash if it is non-directoy and upper.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

To get from overlay inode to real inode we currently use 'struct
ovl_entry', which has lifetime connected to overlay dentry.  This is okay,
since each overlay dentry had a new overlay inode allocated.

Following patch will break that assumption, so need to leave out ovl_entry.
This patch stores the real inode directly in i_private, with the lowest bit
used to indicate whether the inode is upper or lower.

Lifetime rules remain, using ovl_inode_real() must only be done while
caller holds ref on overlay dentry (and hence on real dentry), or within
RCU protected regions.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The error is due to RCU and is temporary.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Fix atime update logic in overlayfs.

This patch adds an i_op->update_time() handler to overlayfs inodes.  This
forwards atime updates to the upper layer only.  No atime updates are done
on lower layers.

Remove implicit atime updates to underlying files and directories with
O_NOATIME.  Remove explicit atime update in ovl_readlink().

Clear atime related mnt flags from cloned upper mount.  This means atime
updates are controlled purely by overlayfs mount options.

Reported-by: Konstantin Khlebnikov <koct9i@gmail.com> 
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

When creating directory in workdir, the group/sgid inheritance from the
parent dir was omitted completely.  Fix this by calling inode_init_owner()
on overlay inode and using the resulting uid/gid/mode to create the file.

Unfortunately the sgid bit can be stripped off due to umask, so need to
reset the mode in this case in workdir before moving the directory in
place.
Reported-by: NEryu Guan <eguan@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The fact that we always do permission checking on the overlay inode and
clear MAY_WRITE for checking access to the lower inode allows cruft to be
removed from ovl_permission().

1) "default_permissions" option effectively did generic_permission() on the
overlay inode with i_mode, i_uid and i_gid updated from underlying
filesystem.  This is what we do by default now.  It did the update using
vfs_getattr() but that's only needed if the underlying filesystem can
change (which is not allowed).  We may later introduce a "paranoia_mode"
that verifies that mode/uid/gid are not changed.

2) splitting out the IS_RDONLY() check from inode_permission() also becomes
unnecessary once we remove the MAY_WRITE from the lower inode check.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Now we have two levels of checks in ovl_permission(). overlay inode
is checked with the creds of task while underlying inode is checked
with the creds of mounter.

Looks like mounter does not have to have WRITE access to files on lower/.
So remove the MAY_WRITE from access mask for checks on underlying
lower inode.

This means task should still have the MAY_WRITE permission on lower
inode and mounter is not required to have MAY_WRITE.

It also solves the problem of read only NFS mounts being used as lower.
If __inode_permission(lower_inode, MAY_WRITE) is called on read only
NFS, it fails. By resetting MAY_WRITE, check succeeds and case of
read only NFS shold work with overlay without having to specify any
special mount options (default permission).
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Given we are now doing checks both on overlay inode as well underlying
inode, we should be able to do checks and operations on underlying file
system using mounter's context.

So modify all operations to do checks/operations on underlying dentry/inode
in the context of mounter.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Right now ovl_permission() calls __inode_permission(realinode), to do
permission checks on real inode and no checks are done on overlay inode.

Modify it to do checks both on overlay inode as well as underlying inode.
Checks on overlay inode will be done with the creds of calling task while
checks on underlying inode will be done with the creds of mounter.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Now we are planning to do DAC permission checks on overlay inode
itself. And to make it work, we will need to make sure we can get acls from
underlying inode. So define ->get_acl() for overlay inodes and this in turn
calls into underlying filesystem to get acls, if any.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

ovl_create_upper() and ovl_create_over_whiteout() seem to be sharing some
common code which can be moved into a separate function.  No functionality
change.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Previously this was only done for directory inodes.  Doing so for all
inodes makes for a nice cleanup in ovl_permission at zero cost.

Inodes are not shared for hard links on the overlay, so this works fine.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

No point in keeping overlay inodes around since they will never be reused.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The hash salting changes meant that we can no longer reuse the hash in the
overlay dentry to look up the underlying dentry.

Instead of lookup_hash(), use lookup_one_len_unlocked() and swith to
mounter's creds (like we do for all other operations later in the series).

Now the lookup_hash() export introduced in 4.6 by 3c9fe8cd ("vfs: add
lookup_hash() helper") is unused and can possibly be removed; its
usefulness negated by the hash salting and the idea that mounter's creds
should be used on operations on underlying filesystems.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: 8387ff25 ("vfs: make the string hashes salt the hash")

The upper dentry may become stale before we call ovl_lock_rename_workdir.
For example, someone could (mistakenly or maliciously) manually unlink(2)
it directly from upperdir.

To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir
and and check if it matches the upper dentry.

Essentially, it is the same problem and similar solution as in
commit 11f37104 ("ovl: verify upper dentry before unlink and rename").
Signed-off-by: NMaxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>

Right now when a new overlay inode is created, we initialize overlay
inode's ->i_mode from underlying inode ->i_mode but we retain only
file type bits (S_IFMT) and discard permission bits.

This patch changes it and retains permission bits too. This should allow
overlay to do permission checks on overlay inode itself in task context.

[SzM] It also fixes clearing suid/sgid bits on write.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Reported-by: NEryu Guan <eguan@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>

Before 4bacc9c9 ("overlayfs: Make f_path...") file->f_path pointed to
the underlying file, hence suid/sgid removal on write worked fine.

After that patch file->f_path pointed to the overlay file, and the file
mode bits weren't copied to overlay_inode->i_mode.  So the suid/sgid
removal simply stopped working.

The fix is to copy the mode bits, but then ovl_setattr() needs to clear
ATTR_MODE to avoid the BUG() in notify_change().  So do this first, then in
the next patch copy the mode.
Reported-by: NEryu Guan <eguan@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>

overlay needs underlying fs to support d_type. Recently I put in a
patch in to detect this condition and started failing mount if
underlying fs did not support d_type.

But this breaks existing configurations over kernel upgrade. Those who
are running docker (partially broken configuration) with xfs not
supporting d_type, are surprised that after kernel upgrade docker does
not run anymore.

https://github.com/docker/docker/issues/22937#issuecomment-229881315

So instead of erroring out, detect broken configuration and warn
about it. This should allow existing docker setups to continue
working after kernel upgrade.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: 45aebeaf ("ovl: Ensure upper filesystem supports d_type")
Cc: <stable@vger.kernel.org> 4.6

The two methods essentially do the same: find the real dentry/inode
belonging to an overlay dentry.  The difference is in the usage:

vfs_open() uses ->d_select_inode() and expects the function to perform
copy-up if necessary based on the open flags argument.

file_dentry() uses ->d_real() passing in the overlay dentry as well as the
underlying inode.

vfs_rename() uses ->d_select_inode() but passes zero flags.  ->d_real()
with a zero inode would have worked just as well here.

This patch merges the functionality of ->d_select_inode() into ->d_real()
by adding an 'open_flags' argument to the latter.

[Al Viro] Make the signature of d_real() match that of ->d_real() again.
And constify the inode argument, while we are at it.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

When truncating a file we should check write access on the underlying
inode.  And we should do so on the lower file as well (before copy-up) for
consistency.

Original patch and test case by Aihua Zhang.

 - - >o >o - - test.c - - >o >o - -
#include <stdio.h>
#include <errno.h>
#include <unistd.h>

int main(int argc, char *argv[])
{
	int ret;

	ret = truncate(argv[0], 4096);
	if (ret != -1) {
		fprintf(stderr, "truncate(argv[0]) should have failed\n");
		return 1;
	}
	if (errno != ETXTBSY) {
		perror("truncate(argv[0])");
		return 1;
	}

	return 0;
}
 - - >o >o - - >o >o - - >o >o - -
Reported-by: NAihua Zhang <zhangaihua1@huawei.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>

When using the 'default_permissions' mount option, ovl_permission() on
non-directories was missing a dput(alias), resulting in "BUG Dentry still
in use".
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: 8d3095f4 ("ovl: default permissions")
Cc: <stable@vger.kernel.org> # v4.5+

Fix a regression when creating a file over a whiteout.  The new
file/directory needs to use the current fsuid/fsgid, not the ones from the
mounter's credentials.

The refcounting is a bit tricky: prepare_creds() sets an original refcount,
override_creds() gets one more, which revert_cred() drops.  So

  1) we need to expicitly put the mounter's credentials when overriding
     with the updated one

  2) we need to put the original ref to the updated creds (and this can
     safely be done before revert_creds(), since we'll still have the ref
     from override_creds()).
Reported-by: NStephen Smalley <sds@tycho.nsa.gov>
Fixes: 3fe6e52f ("ovl: override creds with the ones from the superblock mounter")
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

a) ovl_need_xattr_filter() is wrong, we can have multiple lower layers
overlaid, all of which (except the lowest one) honouring the
"trusted.overlay.opaque" xattr.  So need to filter everything except the
bottom and the pure-upper layer.

b) we no longer can assume that inode is attached to dentry in
get/setxattr.

This patch unconditionally filters private xattrs to fix both of the above.
Performance impact for get/removexattrs is likely in the noise.

For listxattrs it might be measurable in pathological cases, but I very
much hope nobody cares.  If they do, we'll fix it then.
Reported-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: b9680917 ("security_d_instantiate(): move to the point prior to attaching dentry to inode")

smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.

Similar change for ->getxattr() had been done in commit ce23e640.  Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

d_type check requires successful creation of workdir as iterates
through work dir and expects work dir to be present in it. If that's
not the case, this check will always return d_type not supported even
if underlying filesystem might be supporting it.

So don't do this check if work dir creation failed in previous step.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

In user namespace the whiteout creation fails with -EPERM because the
current process isn't capable(CAP_SYS_ADMIN) when setting xattr.

A simple reproducer:

$ mkdir upper lower work merged lower/dir
$ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
$ unshare -m -p -f -U -r bash

Now as root in the user namespace:

\# touch merged/dir/{1,2,3} # this will force a copy up of lower/dir
\# rm -fR merged/*

This ends up failing with -EPERM after the files in dir has been
correctly deleted:

unlinkat(4, "2", 0)                     = 0
unlinkat(4, "1", 0)                     = 0
unlinkat(4, "3", 0)                     = 0
close(4)                                = 0
unlinkat(AT_FDCWD, "merged/dir", AT_REMOVEDIR) = -1 EPERM (Operation not
permitted)

Interestingly, if you don't place files in merged/dir you can remove it,
meaning if upper/dir does not exist, creating the char device file works
properly in that same location.

This patch uses ovl_sb_creator_cred() to get the cred struct from the
superblock mounter and override the old cred with these new ones so that
the whiteout creation is possible because overlay is wrong in assuming that
the creds it will get with prepare_creds will be in the initial user
namespace.  The old cap_raise game is removed in favor of just overriding
the old cred struct.

This patch also drops from ovl_copy_up_one() the following two lines:

override_cred->fsuid = stat->uid;
override_cred->fsgid = stat->gid;

This is because the correct uid and gid are taken directly with the stat
struct and correctly set with ovl_set_attr().
Signed-off-by: NAntonio Murdaca <runcom@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The ones that are taking it exclusive, that is...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Generally permission checking is not necessary when overlayfs looks up a
dentry on one of the underlying layers, since search permission on base
directory was already checked in ovl_permission().

More specifically using lookup_one_len() causes a problem when the lower
directory lacks search permission for a specific user while the upper
directory does have search permission.  Since lookups are cached, this
causes inconsistency in behavior: success depends on who did the first
lookup.

So instead use lookup_hash() which doesn't do the permission check.
Reported-by: NIgnacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

ta-da!

The main issue is the lack of down_write_killable(), so the places
like readdir.c switched to plain inode_lock(); once killable
variants of rwsem primitives appear, that'll be dealt with.

lockdep side also might need more work
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This series fixes bugs in nfs and ext4 due to 4bacc9c9 ("overlayfs:
Make f_path always point to the overlay and f_inode to the underlay").

Regular files opened on overlayfs will result in the file being opened on
the underlying filesystem, while f_path points to the overlayfs
mount/dentry.

This confuses filesystems which get the dentry from struct file and assume
it's theirs.

Add a new helper, file_dentry() [*], to get the filesystem's own dentry
from the file.  This checks file->f_path.dentry->d_flags against
DCACHE_OP_REAL, and returns file->f_path.dentry if DCACHE_OP_REAL is not
set (this is the common, non-overlayfs case).

In the uncommon case it will call into overlayfs's ->d_real() to get the
underlying dentry, matching file_inode(file).

The reason we need to check against the inode is that if the file is copied
up while being open, d_real() would return the upper dentry, while the open
file comes from the lower dentry.

[*] If possible, it's better simply to use file_inode() instead.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Tested-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Cc: <stable@vger.kernel.org> # v4.2
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Daniel Axtens <dja@axtens.net>

Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The 'is_merge' is an historical naming from when only a single lower layer
could exist.  With the introduction of multiple lower layers the meaning of
this flag was changed to mean only the "lowest layer" (while all lower
layers were being merged).

So now 'is_merge' is inaccurate and hence renaming to 'is_lowest'
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This patch fixes a newline warning found by the checkpatch.pl tool
Signed-off-by: NSohom-Bhattacharjee <soham.bhattacharjee15@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

In some instances xfs has been created with ftype=0 and there if a file
on lower fs is removed, overlay leaves a whiteout in upper fs but that
whiteout does not get filtered out and is visible to overlayfs users.

And reason it does not get filtered out because upper filesystem does
not report file type of whiteout as DT_CHR during iterate_dir().

So it seems to be a requirement that upper filesystem support d_type for
overlayfs to work properly. Do this check during mount and fail if d_type
is not supported.
Suggested-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>