Availablity of the doorbell_exception function is guarded by
CONFIG_PPC_DOORBELL. Use the same define to guard our caller
of it.
Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com>
[agraf: improve patch description]
Signed-off-by: NAlexander Graf <agraf@suse.de>

KVM/ARM pull request for 3.11 merge window

* tag 'kvm-arm-3.11' of git://git.linaro.org/people/cdall/linux-kvm-arm.git:
  ARM: kvm: don't include drivers/virtio/Kconfig
  Update MAINTAINERS: KVM/ARM work now funded by Linaro
  arm/kvm: Cleanup KVM_ARM_MAX_VCPUS logic
  ARM: KVM: clear exclusive monitor on all exception returns
  ARM: KVM: add missing dsb before invalidating Stage-2 TLBs
  ARM: KVM: perform save/restore of PAR
  ARM: KVM: get rid of S2_PGD_SIZE
  ARM: KVM: don't special case PC when doing an MMIO
  ARM: KVM: use phys_addr_t instead of unsigned long long for HYP PGDs
  ARM: KVM: remove dead prototype for __kvm_tlb_flush_vmid
  ARM: KVM: Don't handle PSCI calls via SMC
  ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq

This reverts most of the f1ed0450. After
the commit kvm_apic_set_irq() no longer returns accurate information
about interrupt injection status if injection is done into disabled
APIC. RTC interrupt coalescing tracking relies on the information to be
accurate and cannot recover if it is not.
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Add a tracepoint write_tsc_offset for tracing TSC offset change.
We want to merge ftrace's trace data of guest OSs and the host OS using
TSC for timestamp in chronological order. We need "TSC offset" values for
each guest when merge those because the TSC value on a guest is always the
host TSC plus guest's TSC offset. If we get the TSC offset values, we can
calculate the host TSC value for each guest events from the TSC offset and
the event TSC value. The host TSC values of the guest events are used when we
want to merge trace data of guests and the host in chronological order.
(Note: the trace_clock of both the host and the guest must be set x86-tsc in
this case)

This tracepoint also records vcpu_id which can be used to merge trace data for
SMP guests. A merge tool will read TSC offset for each vcpu, then the tool
converts guest TSC values to host TSC values for each vcpu.

TSC offset is stored in the VMCS by vmx_write_tsc_offset() or
vmx_adjust_tsc_offset(). KVM executes the former function when a guest boots.
The latter function is executed when kvm clock is updated. Only host can read
TSC offset value from VMCS, so a host needs to output TSC offset value
when TSC offset is changed.

Since the TSC offset is not often changed, it could be overwritten by other
frequent events while tracing. To avoid that, I recommend to use a special
instance for getting this event:

1. set a instance before booting a guest
 # cd /sys/kernel/debug/tracing/instances
 # mkdir tsc_offset
 # cd tsc_offset
 # echo x86-tsc > trace_clock
 # echo 1 > events/kvm/kvm_write_tsc_offset/enable

2. boot a guest
Signed-off-by: NYoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Without this information, users will just see unexpected performance
problems and there is little chance we will get good reports from them:
note that mmio generation is increased even when we just start, or stop,
dirty logging for some memory slot, in which case users cannot expect
all shadow pages to be zapped.

printk_ratelimited() is used for this taking into account the problems
that we can see the information many times when we start multiple VMs
and guests can trigger this by reading ROM in a loop for example.
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Document it to Documentation/virtual/kvm/mmu.txt
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Document it to Documentation/virtual/kvm/mmu.txt
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Document fast page fault to Documentation/virtual/kvm/mmu.txt
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Document it to Documentation/virtual/kvm/mmu.txt
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Document write_flooding_count to Documentation/virtual/kvm/mmu.txt
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Document it to Documentation/virtual/kvm/mmu.txt
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop kvm_mmu_zap_mmio_sptes and use kvm_mmu_invalidate_zap_all_pages
instead to handle mmio generation number overflow
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Then it has the chance to trigger mmio generation number wrap-around
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
[Change from MMIO_MAX_GEN - 13 to MMIO_MAX_GEN - 150, because 13 is
 very close to the number of calls to KVM_SET_USER_MEMORY_REGION
 before the guest is started and there is any chance to create any
 spte. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It is useful for debug mmio spte invalidation
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch tries to introduce a very simple and scale way to invalidate
all mmio sptes - it need not walk any shadow pages and hold mmu-lock

KVM maintains a global mmio valid generation-number which is stored in
kvm->memslots.generation and every mmio spte stores the current global
generation-number into his available bits when it is created

When KVM need zap all mmio sptes, it just simply increase the global
generation-number. When guests do mmio access, KVM intercepts a MMIO #PF
then it walks the shadow page table and get the mmio spte. If the
generation-number on the spte does not equal the global generation-number,
it will go to the normal #PF handler to update the mmio spte

Since 19 bits are used to store generation-number on mmio spte, we zap all
mmio sptes when the number is round
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Define some meaningful names instead of raw code
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Store the generation-number into bit3 ~ bit11 and bit52 ~ bit61, totally
19 bits can be used, it should be enough for nearly all most common cases

In this patch, the generation-number is always 0, it will be changed in
the later patch

[Gleb: masking generation bits from spte in get_mmio_spte_gfn() and
       get_mmio_spte_access()]
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The virtio configuration has recently moved and is now visible everywhere.
Including the file again from KVM as we used to need earlier now causes
dependency problems:

warning: (CAIF_VIRTIO && VIRTIO_PCI && VIRTIO_MMIO && REMOTEPROC && RPMSG)
selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION)

Cc: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Change my e-mail address to the Linaro one and change status from
Maintained to Supported.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Commit d21a1c83 (ARM: KVM: define KVM_ARM_MAX_VCPUS
unconditionally) changed the Kconfig logic for KVM_ARM_MAX_VCPUS to work around a
build error arising from the use of KVM_ARM_MAX_VCPUS when CONFIG_KVM=n.  The
resulting Kconfig logic is a bit awkward and leaves a KVM_ARM_MAX_VCPUS always
defined in the kernel config file.

This change reverts the Kconfig logic back and adds a simple preprocessor
conditional in kvm_host.h to handle when CONFIG_KVM_ARM_MAX_VCPUS is undefined.
Signed-off-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Make sure we clear the exclusive monitor on all exception returns,
which otherwise could lead to lock corruptions.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

When performing a Stage-2 TLB invalidation, it is necessary to
make sure the write to the page tables is observable by all CPUs.

For this purpose, add a dsb instruction to __kvm_tlb_flush_vmid_ipa
before doing the TLB invalidation itself.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Not saving PAR is an unfortunate oversight. If the guest performs
an AT* operation and gets scheduled out before reading the result
of the translation from PAR, it could become corrupted by another
guest or the host.

Saving this register is made slightly more complicated as KVM also
uses it on the permission fault handling path, leading to an ugly
"stash and restore" sequence. Fortunately, this is already a slow
path so we don't really care. Also, Linux doesn't do any AT*
operation, so Linux guests are not impacted by this bug.

  [ Slightly tweaked to use an even register as first operand to ldrd
    and strd operations in interrupts_head.S - Christoffer ]
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

S2_PGD_SIZE defines the number of pages used by a stage-2 PGD
and is unused, except for a VM_BUG_ON check that missuses the
define.

As the check is very unlikely to ever triggered except in
circumstances where KVM is the least of our worries, just kill
both the define and the VM_BUG_ON check.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu>

Admitedly, reading a MMIO register to load PC is very weird.
Writing PC to a MMIO register is probably even worse. But
the architecture doesn't forbid any of these, and injecting
a Prefetch Abort is the wrong thing to do anyway.

Remove this check altogether, and let the adventurous guest
wander into LaLaLand if they feel compelled to do so.
Reported-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu>

HYP PGDs are passed around as phys_addr_t, except just before calling
into the hypervisor init code, where they are cast to a rather weird
unsigned long long.

Just keep them around as phys_addr_t, which is what makes the most
sense.
Reported-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu>

__kvm_tlb_flush_vmid has been renamed to __kvm_tlb_flush_vmid_ipa,
and the old prototype should have been removed when the code was
modified.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu>

Currently, kvmtool unconditionally declares that HVC should be used
to call PSCI, so the function numbers in the DT tell the guest
nothing about the function ID namespace or calling convention for
SMC.

We already assume that the guest will examine and honour the DT,
since there is no way it could possibly guess the KVM-specific PSCI
function IDs otherwise.  So let's not encourage guests to violate
what's specified in the DT by using SMC to make the call.

[ Modified to apply to top of kvm/arm tree - Christoffer ]
Signed-off-by: NDave P Martin <Dave.Martin@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu>

The arch_timer irq numbers (or PPI numbers) are implementation dependent,
so the host virtual timer irq number can be different from guest virtual
timer irq number.

This patch ensures that host virtual timer irq number is read from DTB and
guest virtual timer irq is determined based on vcpu target type.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu>

Let mmio spte only use bit62 and bit63 on upper 32 bits, then bit 52 ~ bit 61
can be used for other purposes
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Added some missing validity checks for the operands and fixed the
priority of exceptions for some function codes according to the
"Principles of Operation" document.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

LCTL and LCTLG are also privileged instructions, thus there is no need for
treating them separately from the other instructions in priv.c. So this
patch moves these two instructions to priv.c, adds a check for supervisor
state and simplifies the "handle_eb" instruction decoding by merging the
two eb_handlers jump tables from intercept.c and priv.c into one table only.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When a guest calls the TPI instruction, the second operand address could
point to an invalid location. In this case the problem should be signaled
to the guest by throwing an access exception.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

DIAGNOSE is a privileged instruction and thus we must make sure that we are
in supervisor mode before taking any other actions.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We need more fine-grained control about the point in time when we check
for privileged instructions, since the exceptions that can happen during
an instruction have a well-defined priority. For example, for the PFMF
instruction, the check for PGM_PRIVILEGED_OP must happen after the check
for PGM_OPERATION since the latter has a higher precedence - thus the
check for privileged operation must not be done in kvm_s390_handle_b9()
already.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

TPROT is a privileged instruction and thus should generate a privileged
operation exception when the problem state bit is not cleared in the PSW.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Renamed the PGM_PRIVILEGED_OPERATION define to PGM_PRIVILEGED_OP since this
define was way longer than the other PGM_* defines and caused the code often
to exceed the 80 columns limit when not split to multiple lines.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Update the document to match the current reverse mapping of
parent_pte
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The handle_epsw() function calculated the first register in the wrong way,
so that it always used r0 by mistake. Now the code uses the common helper
function for decoding the registers of rre functions instead to avoid such
mistakes.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>