Convert the driver to use GPIO descriptor API.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Intel ALC 700 needs this patch for jack detection function.
Because ALC700's jack detect function defaults is disable.
So alc700 needs pathc to enable jack detection function.
Signed-off-by: NPeiSen Hou <pshou@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit fb087eaa ("ALSA: hda - hdmi eld control created based on pcm")
forget to filter out invalid pcm numbers, if there is only one invalid pcm
number, then this issue causes we create eld control for invalid pcm silently,
but when there are more than one invalid pcm numbers, then this issue bring
probe error looks like below dmesg:
"
kernel: [    1.647283] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xc2967540)
kernel: [    1.651192] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [    1.651195] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [    1.651197] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [    1.651199] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [    1.651201] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [    1.651203] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [    1.651676] snd_hda_intel 0000:00:03.0: control 3:0:0:ELD:0 is already present
kernel: [    1.651787] snd_hda_codec_hdmi: probe of hdaudioC0D0 failed with error -16
"

This patch add invalid pcm number filter before calling hdmi_create_eld_ctl.

Fixes: fb087eaa ("ALSA: hda - hdmi eld control created based on pcm")
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

kfree on NULL pointer is a no-op and therefore checking is redundant.
Signed-off-by: NHimanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.13

A couple of fixes, one for a regression in simple-card introduced during
the merge window that was only reported this week and another for a
regression in registration of ACPI GPIOs.

sh audio driver prints its presence at probe function but a proper
KERN_ prefix is missing.  Put KERN_INFO there as it's merely an
advertisement.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The usx2y driver has a debug printk code without proper KERN_ prefix.
On recent kernels, KERN_CONT prefix is mandatory for continued output
lines.  Put it properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The usb-audio driver has a debug printk code without proper KERN_
prefix.  On recent kernels, KERN_CONT prefix is mandatory for
continued output lines.  Put it properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The asihpi driver has a debug printk code without proper KERN_
prefix.  On recent kernels, KERN_CONT prefix is mandatory for
continued output lines.  Put it properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The vx driver has a debug printk code without proper KERN_ prefix.
On recent kernels, KERN_CONT prefix is mandatory for continued output
lines.  Put it properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The opl3 driver has a debug printk code without proper KERN_ prefix.
On recent kernels, KERN_CONT prefix is mandatory for continued output
lines.  Put it properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some ioctl functions are implemented individually for both playback
and capture streams although most of the codes are identical with just
a few different stream-specific function calls.  This patch unifies
these places, removes the superfluous trivial check and flattens the
call paths as a cleanup.  Meanwhile, for better readability, some
codes (e.g. xfer ioctls or forward/rewind ioctls) are factored out as
functions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently we're taking power_lock at each card component for assuring
the power-up sequence, but it doesn't help anything in the
implementation at the moment: it just serializes unnecessarily the
callers, but it doesn't protect about the power state change itself.
It used to have some usefulness in the early days where we managed the
PM manually.  But now the suspend/resume core procedure is beyond our
hands, and power_lock lost its meaning.

This patch drops the power_lock from allover the places.
There shouldn't be any issues by this change, as it's no helper
regarding the power state change.  Rather we'll get better performance
by removing the serialization; which is the only slight concern of any
behavior change, but it can't be a showstopper, after all.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_soc_of_parse_card_name() doesn't return an error if the requested
property isn't present, but silently fails to fill the card name. This can
not be changed, as it is a backwards compatibility measure itself.

We can not rely on the return value of this function alone, but must check
if the card name has been filled sucessfully when deciding to skip the
fallback path, which is in place for existing users.

Fixes: dedfaa1e (ASoC: simple-card-utils: enable "label" on
                     asoc_simple_card_parse_card_name)
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

PCM OSS emulation issues the drain ioctl without power lock.  It used
to work in the earlier kernels as the power lock was taken inside
snd_pcm_drain() itself.  But since 68b4acd3 ("ALSA: pcm: Apply
power lock globally to common ioctls"), the power lock is taken
outside the function.  Due to that change, the call via OSS emulation
leads to the unbalanced power lock, thus it deadlocks.

As a quick fix, just take the power lock before snd_pcm_drain() call
for OSS emulation path.  A better cleanup will follow later.

Fixes: 68b4acd3 ("ALSA: pcm: Apply power lock globally to common ioctls")
Reported-and-tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit c8da9be4 ("ALSA: pcm: Adjust nine function calls
together with a variable assignment") contained a badly incorrect
conversion, a "status" PCM procfs creation was replaced with the next
one.  Luckily, this could be spotted easily by the kernel runtime
warning.

Fixes: c8da9be4 ("ALSA: pcm: Adjust nine function calls together...")
Reported-by: NFabio Estevam <fabio.estevam@nxp.com>
Tested-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Not all devices with ACPI and this combination of sound devices will
have the required information provided via ACPI.  Reintroduce the I2C
device ID to restore sound functionality on on the Chromebook 'Samus'
model.

[ More background note:
 the commit a36afb0a ("ASoC: rt5677: Introduce proper table...")
 moved the i2c ID probed via ACPI ("RT5677CE:00") to a proper
 acpi_device_id table.  Although the action itself is correct per se,
 the overseen issue is the reference id->driver_data at
 rt5677_i2c_probe() for retrieving the corresponding chip model for
 the given id.  Since id=NULL is passed for ACPI matching case, we get
 an Oops now.

 We already have queued more fixes for 4.14 and they already address
 the issue, but they are bigger changes that aren't preferable for the
 late 4.13-rc stage.  So, this patch just papers over the bug as a
 once-off quick fix for a particular ACPI matching.  -- tiwai ]

Fixes: a36afb0a ("ASoC: rt5677: Introduce proper table for ACPI enumeration")
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For user-defined element set, in its initial state, TLV data is not
registered. It's firstly available when any application register it by
an additional operation. However, in current implementation, it's available
in its initial state. As a result, applications get -ENXIO to read it.

This commit controls its readability to manage info flags properly. In an
initial state, elements don't have SND_CTL_ELEM_ACCESS_TLV_READ flag. Once
TLV write operation is executed, they get the flag.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In a design of user-defined element set, applications allow to change TLV
data on the set. This operation doesn't only affects to a target element,
but also to elements in the set.

This commit generates TLV event for all of elements in the set when the TLV
data is changed.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In a design of ALSA control core, a set of elements is represented by
'struct snd_kcontrol' to share common attributes. The set of elements
shares TLV (Type-Length-Value) data, too.

On the other hand, in ALSA control interface/protocol for applications,
a TLV operation is committed to an element. Totally, the operation can
have sub-effect to the other elements in the set. For example, TLV_WRITE
operation is expected to change TLV data, which returns to applications.
Applications attempt to change the TLV data per element, but in the above
design, they can effect to elements in the same set.

As a default, ALSA control core has no implementation except for TLV_READ
operation. Thus, the above design looks to have no issue. However, in
kernel APIs of ALSA control component, developers can program a handler
for any request of the TLV operation. Therefore, for elements in a set
which has the handler, applications can commit TLV_WRITE and TLV_COMMAND
requests.

For the above scenario, ALSA control core assist notification. When the
handler returns positive value, the core queueing an event for a requested
element. However, this includes design defects that the event is not
queued for the other element in a set. Actually, developers can program
the handlers to keep per-element TLV data, but it depends on each driver.

As of v4.13-rc6, there's no driver in tree to utilize the notification,
except for user-defined element set. This commit delegates the notification
into each driver to prevent developers from the design defects.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_ac97_res_table are not supposed to change at runtime. All functions
working with snd_ac97_res_table provided by <sound/ac97_codec.h> work with
const snd_ac97_res_table. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make these const as they are only used in a copy operation.
Done using Coccinelle:

@match disable optional_qualifier@
identifier s;
@@
static struct hw s = {...};

@ref@
position p;
identifier match.s;
@@
s@p

@good1@
position ref.p;
identifier match.s,f,c;
expression e;
@@
(
e = s@p
|
e = s@p.f
|
c(...,s@p.f,...)
|
c(...,s@p,...)
)

@bad depends on  !good1@
position ref.p;
identifier match.s;
@@
s@p

@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct hw s;
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ac97_pcm are not supposed to change at runtime. All functions
working with ac97_pcm provided by <sound/ac97_codec.h> work with
const ac97_pcm. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ac97_pcm are not supposed to change at runtime. All functions
working with ac97_pcm provided by <sound/ac97_codec.h> work with
const ac97_pcm. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ac97_pcm are not supposed to change at runtime. All functions
working with ac97_pcm provided by <sound/ac97_codec.h> work with
const ac97_pcm. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ac97_pcm are not supposed to change at runtime. All functions
working with ac97_pcm provided by <sound/ac97_codec.h> work with
const ac97_pcm. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add jump targets so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The script "checkpatch.pl" pointed information out like the following.

ERROR: do not use assignment in if condition

Thus fix the affected source code place.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The script "checkpatch.pl" pointed information out like the following.

ERROR: do not use assignment in if condition

Thus fix the affected source code places.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the
similar workaround for the inverted stereo dmic like other Lenovo
models.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell laptops have another LED for mic-mute in addition to the master
mute.  The former is tied with the capture switch (in a reverse way)
while the latter is tied with the master playback switch.  We already
have an enum control to change the behavior for the master mute LED in
different ways, e.g. keeping always off or turning off at mute.  But,
the mic-mute LED has no such management but its behavior is
hard-coded.

This patch implements an enum control to change the mic-mute LED
behavior like what we have for the master mute LED.  The ctl provides
four modes: keep-on, keep-off, follow-capture and follow-mute.  The
default mode is the last one, follow-mute, which follows the capture
mute, i.e. LED turning on when the capture is off, and turning off
when the capture is active.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add jump targets so that a bit of exception handling can be better reused
at the end of these functions.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>