[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.

[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.

v2:
  Don't drop is_blanked logic
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NMustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Nmeenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Cc: torvalds@linux-foundation.org
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The WA from commit 2a50edbf ("drm/amd/display: Apply w/a for hard hang
on HPD") and commit 1bd3bc74 ("drm/amd/display: Extend w/a for hard
hang on HPD to dcn20") causes a regression in s0ix where the system will
fail to resume properly on many laptops.  Pull the workarounds out to
avoid that s0ix regression in the common case.  This HPD hang happens with
an external device in special circumstances and a new W/A will need to be
developed for this in the future.

Cc: stable@vger.kernel.org
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: NScott Bruce <smbruce@gmail.com>
Reported-by: NChris Hixon <linux-kernel-bugs@hixontech.com>
Reported-by: spasswolf@web.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215436
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1821
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1852
Fixes: 2a50edbf ("drm/amd/display: Apply w/a for hard hang on HPD")
Fixes: 1bd3bc74 ("drm/amd/display: Extend w/a for hard hang on HPD to dcn20")
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise future commands may fail as well leading to downstream
problems that look like they stemmed from a timeout the first time
but really didn't.
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit a896f870.

It causes odd flickering on my Radeon RX580 (PCI ID 1002:67df rev e7,
subsystem ID 1da2:e353).

Bisected right to this commit, and reverting it fixes things.

Link: https://lore.kernel.org/all/CAHk-=wg9hDde_L3bK9tAfdJ4N=TJJ+SjO3ZDONqH5=bVoy_Mzg@mail.gmail.com/
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[Why]
To maintain compatibility with firmware older than 4.0.11.

Those firmware may have interrmittent hangs with RDCSPIPE or the PHY,
but we shouldn't regress their previous behavior.

[How]
Use the new path if firmware is development or 4.0.11 or newer. Use the
legacy path otherwise.

Fixes: 41f91315 ("drm/amd/display: Query DMCUB for dp alt status")
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHansen Dsouza <hansen.dsouza@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
driver missed the check.

[how]
add the check.
add min display clock = 100mhz check based on dccg doc.

[note]
add SetPhyclkVoltageByFreq as confirmed with smu, but not enabled in
this change.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
1. Current code hard codes link to PHY mapping in dc link level per asic
per revision.
This is not scalable. In long term the mapping will be obatined from
DMUB and store in dc resource.

2. Depending on DCN revision and endpoint type, the definition of
dio_output_idx dio_output_type and phy_idx are not  consistent. We need
to unify the meaning of these hardware indices across different system
configuration.

[how]
1. Temporarly move the hardcoded mapping to dc_resource level, which
should have full awareness of asic specific configuration and add a TODO
comment to move the mapping to DMUB.

2. populate dio_output_idx/phy_idx for all configuration, define
usb4_enabled bit instead of dio_output_type as an external enum.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Depend on res_pool->res_cap->num_timing_generator to query timing
gernerator information, it would case underflow at the fused display
pipes case.
Due to the res_pool->res_cap->num_timing_generator records default
timing generator resource built in driver, not the current chip.

[How]
Some ASICs would be fused display pipes less than the default setting.
In dcnxx_resource_construct function, driver would obatin real timing
generator count and store it into res_pool->timing_generator_count.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NYi-Ling Chen <Yi-Ling.Chen2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The "plane_state" pointer was access before checking if it was NULL.

Avoid a possible NULL pointer dereference by accessing the plane
address after the check.

Addresses-Coverity-ID: 1493892 ("Dereference before null check")
Fixes: 3f68c01b ("drm/amd/display: add cyan_skillfish display support")
Signed-off-by: NJosé Expósito <jose.exposito89@gmail.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In function enable_stream_features(), the variable "old_downspread.raw"
could be uninitialized if core_link_read_dpcd() fails, however, it is
used in the later if statement, and further, core_link_write_dpcd()
may write random value, which is potentially unsafe.

Fixes: 6016cd9d ("drm/amd/display: add helper for enabling mst stream features")
Cc: stable@vger.kernel.org
Signed-off-by: NYizhuo Zhai <yzhai003@ucr.edu>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
When reboot the link res map should be persisted.  So during boot up,
driver will look at the map to determine which link should take priority
to use certain link res.  This is to ensure that link res remains
unshuffled after a reboot.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
When there are more DP2.0 RXs connected than the number HPO DP link
encoders we have, we need to dynamically allocate HPO DP link encoder to
the port that needs it.

[how]
Only allocate HPO DP link encoder when it is needed.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Update all accesses to use hpo dp link encoder through link resource
only.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
This commit is to populate link res in preparation of the next commit.
The next commit will replace all existing code to use link res instead
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
There will be a series of re-arch changes in Link Resource Management.
They are more and more muxable link resource objects and the resource is
insufficient for a one to one allocation to all links created.
Therefore a link resource sharing logic is required to determine which
link should use certain link resource.

This commit is the first one in this series that starts by defining a
link resource struct, this struct will be available to all interfaces
that need to perform link programming sequence.

In later commits, we will granduately decouple link resource objects out
of dc link. So instead of access a link resource from dc link. Current
link's resource can be accessible through pipe_ctx->link_res during
commit, or by calling  dc_link_get_cur_link_res function with current
link passed in after commit.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along the following:

- Fixes and improvements in the LTTPR code
- Improve z-state
- Fix null pointer check
- Improve communication with s0i2
- Update multiple-display split policy
- Add missing registers
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Undo ODM Combine regression causing causing pipe allocation issues.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NMartin Leung <Martin.Leung@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
These registers are currently missing from the DCN303 header files
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Current implementation of pipe split policy prevents pipe split with
multiple displays connected, which caused the MCLK speed to be stuck at
max

[HOW]
Changed the pipe split policies so that pipe split is allowed for
multi-display configurations

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1522
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1709
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1655
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAngus Wang <angus.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We'll exit optimized power state to do link detection but we won't enter
back into the optimized power state.

This could potentially block s2idle entry depending on the sequencing,
but it also means we're losing some power during the transition period.

[How]
Hook up the handler like DCN21. It was also missed like the
exit_optimized_pwr_state callback.

Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ")
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DP spec specifies that DPRX shall use the read interval in the
TRAINING_AUX_RD_INTERVAL_PHY_REPEATER LTTPR DPCD register. This
register's bit definition is the same as the AUX read interval register
for DPRX.

[How}
Remove logic which forces AUX read interval to 100us for repeaters when
in LTTPR non-transparent mode.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NWesley Chalmers <wesley.chalmers@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Otherwise SMU won't mark Display as idle when trying to perform s2idle.

[How]
Mark the bit in the dcn31 codepath, doesn't apply to older ASIC.

It needed to be split from phy refclk off to prevent entering s2idle
when PSR was engaged but driver was not ready.

Fixes: 118a3315 ("drm/amd/display: Add DCN3.1 clock manager support")
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lacked power down for DCN10.

[How]
Added power down for DCN10.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NDerek Lai <Derek.Lai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Stutter period won't be less than 5000.0, but if PSR is enabled then we
can potentially enter Z9 when MPO is enabled.

SMU will try to enter Z9 too early in these cases (before PSR is
enabled) and we'll see underflow.

[How]
Block z-states (z9, z10) until we can add a new interface to SMU to
signal when we can support z10 but not z9.

We can revert this once the interface change is in.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Current implementation is not scalable and retrofits the existing
standard link training code for purposes outside of its original design.

[How]
Refactor vendor specific link training sequence into its own separate
function to be called instead of the standard link training function.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Max link rate should be limited to the maximum link rate support by any
LTTPR that are connected, including when operating in transparent mode.

[How]
Include transparent mode when factoring in LTTPR max supported link
rate.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NWesley Chalmers <wesley.chalmers@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
B0 PHY C map to F, D map to G driver use logic instance, dmub does the
remap. Driver still need use the right PHY instance to access right HW.

[how]
use phyical instance when program PHY register.

[note]
could move resync_control programming to dmub next.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Current implementation of pipe split policy prevents pipe split with
multiple displays connected, which caused the MCLK speed to be stuck at
max

[HOW]
Changed the pipe split policies so that pipe split is allowed for
multi-display configurations

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1522
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1709
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1655
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403

Note this is a backport of this commit from amdgpu drm-next for 5.16.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAngus Wang <angus.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
A porting error on a previous patch left the block of code that
causes the crash from a NULL pointer dereference.

More specifically, we try to access link_enc before it's assigned in
the USB4 case in the following assignment:

config.dio_output_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A;

[How]
That assignment occurs later depending on the ASIC version. It's only
needed on DCN31 and only after link_enc is already assigned.

Fixes: 98643044 ("drm/amd/display: fix a crash on USB4 over C20 PHY")
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We'll exit optimized power state to do link detection but we won't enter
back into the optimized power state.

This could potentially block s2idle entry depending on the sequencing,
but it also means we're losing some power during the transition period.

[How]
Hook up the handler like DCN21. It was also missed like the
exit_optimized_pwr_state callback.

Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ")
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Otherwise SMU won't mark Display as idle when trying to perform s2idle.

[How]
Mark the bit in the dcn31 codepath, doesn't apply to older ASIC.

It needed to be split from phy refclk off to prevent entering s2idle
when PSR was engaged but driver was not ready.

Fixes: 118a3315 ("drm/amd/display: Add DCN3.1 clock manager support")
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lacked power down for DCN10.

[How]
Added power down for DCN10.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NDerek Lai <Derek.Lai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
B0 PHY C map to F, D map to G driver use logic instance, dmub does the
remap. Driver still need use the right PHY instance to access right HW.

[how]
use phyical instance when program PHY register.

[note]
could move resync_control programming to dmub next.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
A porting error on a previous patch left the block of code that
causes the crash from a NULL pointer dereference.

More specifically, we try to access link_enc before it's assigned in
the USB4 case in the following assignment:

config.dio_output_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A;

[How]
That assignment occurs later depending on the ASIC version. It's only
needed on DCN31 and only after link_enc is already assigned.

Fixes: 98643044 ("drm/amd/display: fix a crash on USB4 over C20 PHY")
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the following coccicheck warning:

./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c:744:35-36:
WARNING comparing pointer to 0.
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NJiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
SMU now respects the PHY refclk disable request from driver.

This causes a hang during hotplug when PHY refclk was disabled
because it's not being re-enabled and the transmitter control
starts on dc_link_detect.

[How]
We normally would re-enable the clk with exit_optimized_pwr_state
but this is only set on DCN21 and DCN301. Set it for dcn31 as well.

This fixes DMCUB timeouts in the PHY.

Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ")
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

why:
Need interface to lower clocks when in dc (power save)
mode. Must be able to work with p_state unsupported cases
Can cause flicker when OS notifies us of dc state change

how:
added dal3 interface for KMD
added pathway to query smu for this softmax
added blank before clock change to override underflow
added logic to change clk based on pstatesupport and softmax
added logic in prepare/optimize_bw to conform while changing
clocks
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NMartin Leung <Martin.Leung@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For ODM + MPO window on one half of ODM, only 3 pipes should
be allocated and scaling parameters adjusted to handle this case

[How]
Fix pipe allocation when MPO viewport is only on one side of ODM
split, and modify scaling paramters.
Added diags test cases for ODM + windows MPO, where MPO window is
on right half, left half, and both halves or ODM.
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
This workaround resolves underflow caused by incorrect DST_Y_PREFETCH.
Overriding to 192KB DET buf size until the DST_Y_PREFETCH calc is fixed.
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>