Upcoming multi-tce support (H_PUT_TCE_INDIRECT/H_STUFF_TCE hypercalls)
will validate TCE (not to have unexpected bits) and IO address
(to be within the DMA window boundaries).

This introduces helpers to validate TCE and IO address. The helpers are
exported as they compile into vmlinux (to work in realmode) and will be
used later by KVM kernel module in virtual mode.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

SPAPR_TCE_SHIFT is used in few places only and since IOMMU_PAGE_SHIFT_4K
can be easily used instead, remove SPAPR_TCE_SHIFT.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

At the moment pages used for TCE tables (in addition to pages addressed
by TCEs) are not counted in locked_vm counter so a malicious userspace
tool can call ioctl(KVM_CREATE_SPAPR_TCE) as many times as
RLIMIT_NOFILE and lock a lot of memory.

This adds counting for pages used for TCE tables.

This counts the number of pages required for a table plus pages for
the kvmppc_spapr_tce_table struct (TCE table descriptor) itself.

This changes release_spapr_tce_table() to store @npages on stack to
avoid calling kvmppc_stt_npages() in the loop (tiny optimization,
probably).

This does not change the amount of used memory.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

At the moment only spapr_tce_tables updates are protected against races
but not lookups. This fixes missing protection by using RCU for the list.
As lookups also happen in real mode, this uses
list_for_each_entry_lockless() (which is expected not to access any
vmalloc'd memory).

This converts release_spapr_tce_table() to a RCU scheduled handler.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This reworks the existing H_PUT_TCE/H_GET_TCE handlers to have following
patches applied nicer.

This moves the ioba boundaries check to a helper and adds a check for
least bits which have to be zeros.

The patch is pretty mechanical (only check for least ioba bits is added)
so no change in behaviour is expected.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

ec53500f "kvm: Add VFIO device" added a special KVM pseudo-device which is
used to handle any necessary interactions between KVM and VFIO.

Currently that device is built on x86 and ARM, but not powerpc, although
powerpc does support both KVM and VFIO.  This makes things awkward in
userspace

Currently qemu prints an alarming error message if you attempt to use VFIO
and it can't initialize the KVM VFIO device.  We don't want to remove the
warning, because lack of the KVM VFIO device could mean coherency problems
on x86.  On powerpc, however, the error is harmless but looks disturbing,
and a test based on host architecture in qemu would be ugly, and break if
we do need the KVM VFIO device for something important in future.

There's nothing preventing the KVM VFIO device from being built for
powerpc, so this patch turns it on.  It won't actually do anything, since
we don't define any of the arch_*() hooks, but it will make qemu happy and
we can extend it in future if we need to.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NEric Auger <eric.auger@linaro.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace).  This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o.  It allows userspace to coordinate
DMA/RDMA from/to persistent memory.

The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver.  The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.

The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag.  Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.

Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array.  Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory.  The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.

This patch (of 18):

The core has developed a need for a "pfn_t" type [1].  Move the existing
pfn_t in KVM to kvm_pfn_t [2].

[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.htmlSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The get and set operations got exchanged by mistake when moving the
code from book3s.c to powerpc.c.

Fixes: 3840edc8
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently it is possible for userspace (e.g. QEMU) to set a value
for the MSR for a guest VCPU which has both of the TS bits set,
which is an illegal combination.  The result of this is that when
we execute a hrfid (hypervisor return from interrupt doubleword)
instruction to enter the guest, the CPU will take a TM Bad Thing
type of program interrupt (vector 0x700).

Now, if PR KVM is configured in the kernel along with HV KVM, we
actually handle this without crashing the host or giving hypervisor
privilege to the guest; instead what happens is that we deliver a
program interrupt to the guest, with SRR0 reflecting the address
of the hrfid instruction and SRR1 containing the MSR value at that
point.  If PR KVM is not configured in the kernel, then we try to
run the host's program interrupt handler with the MMU set to the
guest context, which almost certainly causes a host crash.

This closes the hole by making kvmppc_set_msr_hv() check for the
illegal combination and force the TS field to a safe value (00,
meaning non-transactional).

Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The vcpu_book3s variable is assigned but never used. So remove it.
Found using cppcheck.
Signed-off-by: NGeyslan G. Bem <geyslan@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In the old DABR register, the BT (Breakpoint Translation) bit
is bit number 61. In the new DAWRX register, the WT (Watchpoint
Translation) bit is bit number 59. So to move the DABR-BT bit
into the position of the DAWRX-WT bit, it has to be shifted by
two, not only by one. This fixes hardware watchpoints in gdb of
older guests that only use the H_SET_DABR/X interface instead
of the new H_SET_MODE interface.

Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

As we saw with the TM Bad Thing type of program interrupt occurring
on the hrfid that enters the guest, it is not completely impossible
to have a trap occurring in the guest entry/exit code, despite the
fact that the code has been written to avoid taking any traps.

This adds a check in the kvmppc_handle_exit_hv() function to detect
the case when a trap has occurred in the hypervisor-mode code, and
instead of treating it just like a trap in guest code, we now print
a message and return to userspace with a KVM_EXIT_INTERNAL_ERROR
exit reason.

Of the various interrupts that get handled in the assembly code in
the guest exit path and that can return directly to the guest, the
only one that can occur when MSR.HV=1 and MSR.EE=0 is machine check
(other than system call, which we can avoid just by not doing a sc
instruction).  Therefore this adds code to the machine check path to
ensure that if the MCE occurred in hypervisor mode, we exit to the
host rather than trying to continue the guest.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Create a single function that flushes everything (FP, VMX, VSX, SPE).
Doing this all at once means we only do one MSR write.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Create a single function that gives everything up (FP, VMX, VSX, SPE).
Doing this all at once means we only do one MSR write.

A context switch microbenchmark using yield():

http://ozlabs.org/~anton/junkcode/context_switch2.c

./context_switch2 --test=yield --fp --altivec --vector 0 0

shows an improvement of 3% on POWER8.
Signed-off-by: NAnton Blanchard <anton@samba.org>
[mpe: giveup_all() needs to be EXPORT_SYMBOL'ed]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The enable_kernel_*() functions leave the relevant MSR bits enabled
until we exit the kernel sometime later. Create disable versions
that wrap the kernel use of FP, Altivec VSX or SPE.

While we don't want to disable it normally for performance reasons
(MSR writes are slow), it will be used for a debug boot option that
does this and catches bad uses in other areas of the kernel.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Let's reuse the new common function for VPCU lookup by id.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[split out the new function into a separate patch]

In another patch kvm_is_visible_gfn is maken return bool due to this
function only returns zero or one as its return value, let's also make
kvmppc_visible_gpa return bool to keep consistent.

No functional change.
Signed-off-by: NYaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In static micro-threading modes, the dynamic micro-threading code
is supposed to be disabled, because subcores can't make independent
decisions about what micro-threading mode to put the core in - there is
only one micro-threading mode for the whole core.  The code that
implements dynamic micro-threading checks for this, except that the
check was missed in one case.  This means that it is possible for a
subcore in static 2-way micro-threading mode to try to put the core
into 4-way micro-threading mode, which usually leads to stuck CPUs,
spinlock lockups, and other stalls in the host.

The problem was in the can_split_piggybacked_subcores() function, which
should always return false if the system is in a static micro-threading
mode.  This fixes the problem by making can_split_piggybacked_subcores()
use subcore_config_ok() for its checks, as subcore_config_ok() includes
the necessary check for the static micro-threading modes.

Credit to Gautham Shenoy for working out that the reason for the hangs
and stalls we were seeing was that we were trying to do dynamic 4-way
micro-threading while we were in static 2-way mode.

Fixes: b4deba5c
Cc: vger@stable.kernel.org # v4.3
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When handling a hypervisor data or instruction storage interrupt (HDSI
or HISI), we look up the SLB entry for the address being accessed in
order to translate the effective address to a virtual address which can
be looked up in the guest HPT.  This lookup can occasionally fail due
to the guest replacing an SLB entry without invalidating the evicted
SLB entry.  In this situation an ERAT (effective to real address
translation cache) entry can persist and be used by the hardware even
though there is no longer a corresponding SLB entry.

Previously we would just deliver a data or instruction storage interrupt
(DSI or ISI) to the guest in this case.  However, this is not correct
and has been observed to cause guests to crash, typically with a
data storage protection interrupt on a store to the vmemmap area.

Instead, what we do now is to synthesize a data or instruction segment
interrupt.  That should cause the guest to reload an appropriate entry
into the SLB and retry the faulting instruction.  If it still faults,
we should find an appropriate SLB entry next time and be able to handle
the fault.
Tested-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This reverts commit 9678cdaa ("Use the POWER8 Micro Partition
Prefetch Engine in KVM HV on POWER8") because the original commit had
multiple, partly self-cancelling bugs, that could cause occasional
memory corruption.

In fact the logmpp instruction was incorrectly using register r0 as the
source of the buffer address and operation code, and depending on what
was in r0, it would either do nothing or corrupt the 64k page pointed to
by r0.

The logmpp instruction encoding and the operation code definitions could
be corrected, but then there is the problem that there is no clearly
defined way to know when the hardware has finished writing to the
buffer.

The original commit attempted to work around this by aborting the
write-out before starting the prefetch, but this is ineffective in the
case where the virtual core is now executing on a different physical
core from the one where the write-out was initiated.

These problems plus advice from the hardware designers not to use the
function (since the measured performance improvement from using the
feature was actually mostly negative), mean that reverting the code is
the best option.

Fixes: 9678cdaa ("Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8")
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently a CPU running a guest can receive a H_DOORBELL in the
following two cases:
1) When the CPU is napping due to CEDE or there not being a guest
vcpu.
2) The CPU is running the guest vcpu.

Case 1), the doorbell message is not cleared since we were waking up
from nap. Hence when the EE bit gets set on transition from guest to
host, the H_DOORBELL interrupt is delivered to the host and the
corresponding handler is invoked.

However in Case 2), the message gets cleared by the action of taking
the H_DOORBELL interrupt. Since the CPU was running a guest, instead
of invoking the doorbell handler, the code invokes the second-level
interrupt handler to switch the context from the guest to the host. At
this point the setting of the EE bit doesn't result in the CPU getting
the doorbell interrupt since it has already been delivered once. So,
the handler for this doorbell is never invoked!

This causes softlockups if the missed DOORBELL was an IPI sent from a
sibling subcore on the same CPU.

This patch fixes it by explitly invoking the doorbell handler on the
exit path if the exit reason is H_DOORBELL similar to the way an
EXTERNAL interrupt is handled. Since this will also handle Case 1), we
can unconditionally clear the doorbell message in
kvmppc_check_wake_reason.
Signed-off-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

QEMU assumes 32 memslots if this extension is not implemented. Although,
current value of KVM_USER_MEM_SLOTS is 32, once KVM_USER_MEM_SLOTS
changes QEMU would take a wrong value.
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes a bug where the old HPTE value returned by H_REMOVE has
the valid bit clear if the HPTE was an absent HPTE, as happens for
HPTEs for emulated MMIO pages and for RAM pages that have been paged
out by the host.  If the absent bit is set, we clear it and set the
valid bit, because from the guest's point of view, the HPTE is valid.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently the KVM_PPC_ALLOCATE_HTAB will try to allocate the requested
size of HPT, and if that is not possible, then try to allocate smaller
sizes (by factors of 2) until either a minimum is reached or the
allocation succeeds.  This is not ideal for userspace, particularly in
migration scenarios, where the destination VM really does require the
size requested.  Also, the minimum HPT size of 256kB may be
insufficient for the guest to run successfully.

This removes the fallback to smaller sizes on allocation failure for
the KVM_PPC_ALLOCATE_HTAB ioctl.  The fallback still exists for the
case where the HPT is allocated at the time the first VCPU is run, if
no HPT has been allocated by ioctl by that time.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

For the machine check interrupt that happens while we are in the guest,
kvm layer attempts the recovery, and then delivers the machine check interrupt
directly to the guest if recovery fails. On successful recovery we go back to
normal functioning of the guest. But there can be cases where a machine check
interrupt can happen with MSR(RI=0) while we are in the guest. This means
MC interrupt is unrecoverable and we have to deliver a machine check to the
guest since the machine check interrupt might have trashed valid values in
SRR0/1. The current implementation do not handle this case, causing guest
to crash with Bad kernel stack pointer instead of machine check oops message.

[26281.490060] Bad kernel stack pointer 3fff9ccce5b0 at c00000000000490c
[26281.490434] Oops: Bad kernel stack pointer, sig: 6 [#1]
[26281.490472] SMP NR_CPUS=2048 NUMA pSeries

This patch fixes this issue by checking MSR(RI=0) in KVM layer and forwarding
unrecoverable interrupt to guest which then panics with proper machine check
Oops message.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix couple of cases where we shift left a 32-bit
value thus might get truncated results on 64-bit
targets.
Signed-off-by: NLaurentiu Tudor <Laurentiu.Tudor@freescale.com>
Suggested-by: NScott Wood <scotttwood@freescale.com>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Emulate TMCFG0 TMRN register exposing one HW thread per vcpu.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
[Laurentiu.Tudor@freescale.com: rebased on latest kernel, use
 define instead of hardcoded value, moved code in own function]
Signed-off-by: NLaurentiu Tudor <Laurentiu.Tudor@freescale.com>
Acked-by: NScott Wood <scotttwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We need to properly identify whether a hugepage is an explicit or
a transparent hugepage in follow_huge_addr(). We used to depend
on hugepage shift argument to do that. But in some case that can
result in wrong results. For ex:

On finding a transparent hugepage we set hugepage shift to PMD_SHIFT.
But we can end up clearing the thp pte, via pmdp_huge_get_and_clear.
We do prevent reusing the pfn page via the usage of
kick_all_cpus_sync(). But that happens after we updated the pte to 0.
Hence in follow_huge_addr() we can find hugepage shift set, but transparent
huge page check fail for a thp pte.

NOTE: We fixed a variant of this race against thp split in commit
691e95fd
("powerpc/mm/thp: Make page table walk safe against thp split/collapse")

Without this patch, we may hit the BUG_ON(flags & FOLL_GET) in
follow_page_mask occasionally.

In the long term, we may want to switch ppc64 64k page size config to
enable CONFIG_ARCH_WANT_GENERAL_HUGETLB
Reported-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Access to the kvm->buses (like with the kvm_io_bus_read() and -write()
functions) has to be protected via the kvm->srcu lock.
The kvmppc_h_logical_ci_load() and -store() functions are missing
this lock so far, so let's add it there, too.
This fixes the problem that the kernel reports "suspicious RCU usage"
when lock debugging is enabled.

Cc: stable@vger.kernel.org # v4.1+
Fixes: 99342cf8Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In guest_exit_cont we call kvmhv_commence_exit which expects the trap
number as the argument. However r3 doesn't contain the trap number at
this point and as a result we would be calling the function with a
spurious trap number.

Fix this by copying r12 into r3 before calling kvmhv_commence_exit as
r12 contains the trap number.

Cc: stable@vger.kernel.org # v4.1+
Fixes: eddb60fbSigned-off-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes a bug which results in stale vcore pointers being left in
the per-cpu preempted vcore lists when a VM is destroyed.  The result
of the stale vcore pointers is usually either a crash or a lockup
inside collect_piggybacks() when another VM is run.  A typical
lockup message looks like:

[  472.161074] NMI watchdog: BUG: soft lockup - CPU#24 stuck for 22s! [qemu-system-ppc:7039]
[  472.161204] Modules linked in: kvm_hv kvm_pr kvm xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ses enclosure shpchp rtc_opal i2c_opal powernv_rng binfmt_misc dm_service_time scsi_dh_alua radeon i2c_algo_bit drm_kms_helper ttm drm tg3 ptp pps_core cxgb3 ipr i2c_core mdio dm_multipath [last unloaded: kvm_hv]
[  472.162111] CPU: 24 PID: 7039 Comm: qemu-system-ppc Not tainted 4.2.0-kvm+ #49
[  472.162187] task: c000001e38512750 ti: c000001e41bfc000 task.ti: c000001e41bfc000
[  472.162262] NIP: c00000000096b094 LR: c00000000096b08c CTR: c000000000111130
[  472.162337] REGS: c000001e41bff520 TRAP: 0901   Not tainted  (4.2.0-kvm+)
[  472.162399] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 24848844  XER: 00000000
[  472.162588] CFAR: c00000000096b0ac SOFTE: 1
GPR00: c000000000111170 c000001e41bff7a0 c00000000127df00 0000000000000001
GPR04: 0000000000000003 0000000000000001 0000000000000000 0000000000874821
GPR08: c000001e41bff8e0 0000000000000001 0000000000000000 d00000000efde740
GPR12: c000000000111130 c00000000fdae400
[  472.163053] NIP [c00000000096b094] _raw_spin_lock_irqsave+0xa4/0x130
[  472.163117] LR [c00000000096b08c] _raw_spin_lock_irqsave+0x9c/0x130
[  472.163179] Call Trace:
[  472.163206] [c000001e41bff7a0] [c000001e41bff7f0] 0xc000001e41bff7f0 (unreliable)
[  472.163295] [c000001e41bff7e0] [c000000000111170] __wake_up+0x40/0x90
[  472.163375] [c000001e41bff830] [d00000000efd6fc0] kvmppc_run_core+0x1240/0x1950 [kvm_hv]
[  472.163465] [c000001e41bffa30] [d00000000efd8510] kvmppc_vcpu_run_hv+0x5a0/0xd90 [kvm_hv]
[  472.163559] [c000001e41bffb70] [d00000000e9318a4] kvmppc_vcpu_run+0x44/0x60 [kvm]
[  472.163653] [c000001e41bffba0] [d00000000e92e674] kvm_arch_vcpu_ioctl_run+0x64/0x170 [kvm]
[  472.163745] [c000001e41bffbe0] [d00000000e9263a8] kvm_vcpu_ioctl+0x538/0x7b0 [kvm]
[  472.163834] [c000001e41bffd40] [c0000000002d0f50] do_vfs_ioctl+0x480/0x7c0
[  472.163910] [c000001e41bffde0] [c0000000002d1364] SyS_ioctl+0xd4/0xf0
[  472.163986] [c000001e41bffe30] [c000000000009260] system_call+0x38/0xd0
[  472.164060] Instruction dump:
[  472.164098] ebc1fff0 ebe1fff8 7c0803a6 4e800020 60000000 60000000 60420000 8bad02e2
[  472.164224] 7fc3f378 4b6a57c1 60000000 7c210b78 <e92d0000> 89290009 792affe3 40820070

The bug is that kvmppc_run_vcpu does not correctly handle the case
where a vcpu task receives a signal while its guest vcpu is executing
in the guest as a result of being piggy-backed onto the execution of
another vcore.  In that case we need to wait for the vcpu to finish
executing inside the guest, and then remove this vcore from the
preempted vcores list.  That way, we avoid leaving this vcpu's vcore
on the preempted vcores list when the vcpu gets interrupted.

Fixes: ec257165Reported-by: NThomas Huth <thuth@redhat.com>
Tested-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This new statistic can help diagnosing VCPUs that, for any reason,
trigger bad behavior of halt_poll_ns autotuning.

For example, say halt_poll_ns = 480000, and wakeups are spaced exactly
like 479us, 481us, 479us, 481us. Then KVM always fails polling and wastes
10+20+40+80+160+320+480 = 1110 microseconds out of every
479+481+479+481+479+481+479 = 3359 microseconds. The VCPU then
is consuming about 30% more CPU than it would use without
polling.  This would show as an abnormally high number of
attempted polling compared to the successful polls.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com<
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The code that handles the case when we receive a H_DOORBELL interrupt
has a comment which says "Hypervisor doorbell - exit only if host IPI
flag set".  However, the current code does not actually check if the
host IPI flag is set.  This is due to a comparison instruction that
got missed.

As a result, the current code performs the exit to host only
if some sibling thread or a sibling sub-core is exiting to the
host.  This implies that, an IPI sent to a sibling core in
(subcores-per-core != 1) mode will be missed by the host unless the
sibling core is on the exit path to the host.

This patch adds the missing comparison operation which will ensure
that when HOST_IPI flag is set, we unconditionally exit to the host.

Fixes: 66feed61
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The current dynamic micro-threading code has a race due to which a
secondary thread naps when it is supposed to be running a vcpu. As a
side effect of this, on a guest exit, the primary thread in
kvmppc_wait_for_nap() finds that this secondary thread hasn't cleared
its vcore pointer. This results in "CPU X seems to be stuck!"
warnings.

The race is possible since the primary thread on exiting the guests
only waits for all the secondaries to clear its vcore pointer. It
subsequently expects the secondary threads to enter nap while it
unsplits the core. A secondary thread which hasn't yet entered the nap
will loop in kvm_no_guest until its vcore pointer and the do_nap flag
are unset. Once the core has been unsplit, a new vcpu thread can grab
the core and set the do_nap flag *before* setting the vcore pointers
of the secondary. As a result, the secondary thread will now enter nap
via kvm_unsplit_nap instead of running the guest vcpu.

Fix this by setting the do_nap flag after setting the vcore pointer in
the PACA of the secondary in kvmppc_run_core. Also, ensure that a
secondary thread doesn't nap in kvm_unsplit_nap when the vcore pointer
in its PACA struct is set.

Fixes: b4deba5cSigned-off-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In 64 bit kernels, the Fixed Point Exception Register (XER) is a 64
bit field (e.g. in kvm_regs and kvm_vcpu_arch) and in most places it is
accessed as such.

This patch corrects places where it is accessed as a 32 bit field by a
64 bit kernel.  In some cases this is via a 32 bit load or store
instruction which, depending on endianness, will cause either the
lower or upper 32 bits to be missed.  In another case it is cast as a
u32, causing the upper 32 bits to be cleared.

This patch corrects those places by extending the access methods to
64 bits.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Tested-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Whenever a vcore state is VCORE_PREEMPT we need to be counting stolen
time for it.  This currently isn't the case when we have a vcore that
no longer has any runnable threads in it but still has a runner task,
so we do an explicit call to kvmppc_core_start_stolen() in that case.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When a vcore gets preempted, we put it on the preempted vcore list for
the current CPU.  The runner task then calls schedule() and comes back
some time later and takes itself off the list.  We need to be careful
to lock the list that it was put onto, which may not be the list for the
current CPU since the runner task may have moved to another CPU.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds implementations for the H_CLEAR_REF (test and clear reference
bit) and H_CLEAR_MOD (test and clear changed bit) hypercalls.

When clearing the reference or change bit in the guest view of the HPTE,
we also have to clear it in the real HPTE so that we can detect future
references or changes.  When we do so, we transfer the R or C bit value
to the rmap entry for the underlying host page so that kvm_age_hva_hv(),
kvm_test_age_hva_hv() and kvmppc_hv_get_dirty_log() know that the page
has been referenced and/or changed.

These hypercalls are not used by Linux guests.  These implementations
have been tested using a FreeBSD guest.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>