On MCE the current code will restart the machine with
ppc_md.restart(). This case was extremely unlikely since
prior to that a skiboot call is made and that resulted in
a checkstop for analysis.

With newer skiboots, on P9 we don't checkstop the box by
default, instead we return back to the kernel to extract
useful information at the time of the MCE. While we still
get this information, this patch converts the restart to
a panic(), so that if configured a dump can be taken and
we can track and probably debug the potential issue causing
the MCE.
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NStewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Configure the P9 XSL_DSNCTL register with PHB indications found
in the device tree, or else use legacy hard-coded values.
Signed-off-by: NPhilippe Bergheaud <felix@linux.vnet.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: NChristophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

P9 supports PCI tunneled operations (atomics and as_notify). This
patch adds support for tunneled operations on powernv, with a new
API, to be called by device drivers:

pnv_pci_enable_tunnel()
   Enable tunnel operations, tell driver the 16-bit ASN indication
   used by kernel.

pnv_pci_disable_tunnel()
   Disable tunnel operations.

pnv_pci_set_tunnel_bar()
   Tell kernel the Tunnel BAR Response address used by driver.
   This function uses two new OPAL calls, as the PBCQ Tunnel BAR
   register is configured by skiboot.

pnv_pci_get_as_notify_info()
   Return the ASN info of the thread to be woken up.
Signed-off-by: NPhilippe Bergheaud <felix@linux.vnet.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: NChristophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When sending TLB invalidates to the NPU we need to send extra flushes due
to a hardware issue. The original implementation would lock the all the
ATSD MMIO registers sequentially before unlocking and relocking each of
them sequentially to do the extra flush.

This introduced a deadlock as it is possible for one thread to hold one
ATSD register whilst waiting for another register to be freed while the
other thread is holding that register waiting for the one in the first
thread to be freed.

For example if there are two threads and two ATSD registers:

  Thread A	Thread B
  ----------------------
  Acquire 1
  Acquire 2
  Release 1	Acquire 1
  Wait 1	Wait 2

Both threads will be stuck waiting to acquire a register resulting in an
RCU stall warning or soft lockup.

This patch solves the deadlock by refactoring the code to ensure registers
are not released between flushes and to ensure all registers are either
acquired or released together and in order.

Fixes: bbd5ff50 ("powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD")
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

cpm_cascade() doesn't have to call eoi() as it is already called
by handle_fasteoi_irq()

And cpm_get_irq() will always return an unsigned int so the test
is useless
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This is left over from the segment table implementation and not getting
called from any where now. Hence just drop it.
Suggested-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PSL9D doesn't have a data-cache that needs to be flushed before
resetting the card. However when cxl tries to flush data-cache on such
a card, it times-out as PSL_Control register never indicates flush
operation complete due to missing data-cache. This is usually
indicated in the kernel logs with this message:

"WARNING: cache flush timed out"

To fix this the patch checks PSL_Debug register CDC-Field(BIT:27)
which indicates the absence of a data-cache and sets a flag
'no_data_cache' in 'struct cxl_native' to indicate this. When
cxl_data_cache_flush() is called it checks the flag and if set bails
out early without requesting a data-cache flush operation to the PSL.
Signed-off-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

For PSL9 the contents of PSL_TB_CTLSTAT register have changed in PSL9
and all of the register is now readonly. Hence we don't need an sl_ops
implementation for 'write_timebase_ctrl' for to populate this register
for PSL9.

Hence this patch removes function write_timebase_ctrl_psl9() and its
references from the code.
Signed-off-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We enable the NORST bit by default for debug afu images to prevent
reset of AFU trace-data on a PCI link drop. For production AFU images
this bit is always ignored and PSL gets reconfigured anyways thereby
resetting the trace data. So setting this bit for non-debug images
doesn't have any impact.
Signed-off-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: NChristophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Presently when xmon is disabled by debugfs any existing
instruction/data-access breakpoints set are not disabled. This may
lead to kernel oops when those breakpoints are hit as the necessary
debugger hooks aren't installed.

Hence this patch introduces a new function named clear_all_bpt() which
is called when xmon is disabled via debugfs. The function will
unpatch/clear all the trap and ciabr/dab based breakpoints.
Signed-off-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: NBalbir Singh <bsingharora@gmail.com>
[mpe: Fix build break when CONFIG_DEBUG_FS=n]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Presently sysrq key for xmon('x') is registered during kernel init
irrespective of the value of kernel param 'xmon'. Thus xmon is enabled
even if 'xmon=off' is passed on the kernel command line. However this
doesn't enable the kernel debugger hooks needed for instruction or
data breakpoints. Thus when a break-point is hit with xmon=off a
kernel oops of the form below is reported:

  Oops: Exception in kernel mode, sig: 5 [#1]
  < snip >
  Trace/breakpoint trap

To fix this the patch checks and enables debugger hooks when an
instruction or data break-point is set via xmon console.
Signed-off-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: NBalbir Singh <bsingharora@gmail.com>
[mpe: Just printf directly, no need for static const char[]]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Some processor revisions do not support transactional memory, and
additionally kernel support can be disabled. In either case the
tm-unavailable test should be skipped, otherwise it will fail with
a SIGILL.

That commit also sets this selftest to be called through the test
harness as it's done for other TM selftests.

Finally, it avoids using "ping" as a thread name since it's
ambiguous and can be confusing when shown, for instance,
in a kernel backtrace log.

Fixes: 77fad8bf ("selftests/powerpc: Check FP/VEC on exception in TM")
Signed-off-by: NGustavo Romero <gromero@linux.vnet.ibm.com>
Reviewed-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Make the struct via_pmu_driver const to avoid following warning:

WARNING: vmlinux.o(.data+0x4739c): Section mismatch in reference from the variable via_pmu_driver to the function .init.text:pmu_init()
The variable via_pmu_driver references
the function __init pmu_init()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Signed-off-by: NMathieu Malaterre <malat@debian.org>
Suggested-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Fix the order of cleanup to ensure we free the name buffer in case
of an error creating 'hvwc' or 'info' files.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Remove a bogus line from arch/powerpc/platforms/powernv/Makefile that
was added by commit ece4e512 ("powerpc/vas: Export HVWC to debugfs").
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Ensure that kernel is throwing away the suspended transaction when
sigreturn() is called otherwise it if fails to restore the signal
frame's TM SPRS.
Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: NCyril Bur <cyrilbur@gmail.com>
[mpe: Add have_htm() check, minor formatting, add SPDX tag]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In kernel 4.15, the modprobe step on my PowerBook G4 started complaining that
there was no module license for ans-lcd.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This merges two commits from the `kvm-ppc-fixes` branch into next, as
they fix build breaks we are seeing while testing next.

On the 8xx, the minimum slice size is the size of the area
covered by a single PMD entry, ie 4M in 4K pages mode and 64M in
16K pages mode.

This patch increases the number of slices from 16 to 64 on the 8xx.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

While the implementation of the "slices" address space allows
a significant amount of high slices, it limits the number of
low slices to 16 due to the use of a single u64 low_slices_psize
element in struct mm_context_t

On the 8xx, the minimum slice size is the size of the area
covered by a single PMD entry, ie 4M in 4K pages mode and 64M in
16K pages mode. This means we could have at least 64 slices.

In order to override this limitation, this patch switches the
handling of low_slices_psize to char array as done already for
high_slices_psize.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On the 8xx, the page size is set in the PMD entry and applies to
all pages of the page table pointed by the said PMD entry.

When an app has some regular pages allocated (e.g. see below) and tries
to mmap() a huge page at a hint address covered by the same PMD entry,
the kernel accepts the hint allthough the 8xx cannot handle different
page sizes in the same PMD entry.

10000000-10001000 r-xp 00000000 00:0f 2597 /root/malloc
10010000-10011000 rwxp 00000000 00:0f 2597 /root/malloc

mmap(0x10080000, 524288, PROT_READ|PROT_WRITE,
     MAP_PRIVATE|MAP_ANONYMOUS|0x40000, -1, 0) = 0x10080000

This results the app remaining forever in do_page_fault()/hugetlb_fault()
and when interrupting that app, we get the following warning:

[162980.035629] WARNING: CPU: 0 PID: 2777 at arch/powerpc/mm/hugetlbpage.c:354 hugetlb_free_pgd_range+0xc8/0x1e4
[162980.035699] CPU: 0 PID: 2777 Comm: malloc Tainted: G W       4.14.6 #85
[162980.035744] task: c67e2c00 task.stack: c668e000
[162980.035783] NIP:  c000fe18 LR: c00e1eec CTR: c00f90c0
[162980.035830] REGS: c668fc20 TRAP: 0700   Tainted: G W        (4.14.6)
[162980.035854] MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 24044224 XER: 20000000
[162980.036003]
[162980.036003] GPR00: c00e1eec c668fcd0 c67e2c00 00000010 c6869410 10080000 00000000 77fb4000
[162980.036003] GPR08: ffff0001 0683c001 00000000 ffffff80 44028228 10018a34 00004008 418004fc
[162980.036003] GPR16: c668e000 00040100 c668e000 c06c0000 c668fe78 c668e000 c6835ba0 c668fd48
[162980.036003] GPR24: 00000000 73ffffff 74000000 00000001 77fb4000 100fffff 10100000 10100000
[162980.036743] NIP [c000fe18] hugetlb_free_pgd_range+0xc8/0x1e4
[162980.036839] LR [c00e1eec] free_pgtables+0x12c/0x150
[162980.036861] Call Trace:
[162980.036939] [c668fcd0] [c00f0774] unlink_anon_vmas+0x1c4/0x214 (unreliable)
[162980.037040] [c668fd10] [c00e1eec] free_pgtables+0x12c/0x150
[162980.037118] [c668fd40] [c00eabac] exit_mmap+0xe8/0x1b4
[162980.037210] [c668fda0] [c0019710] mmput.part.9+0x20/0xd8
[162980.037301] [c668fdb0] [c001ecb0] do_exit+0x1f0/0x93c
[162980.037386] [c668fe00] [c001f478] do_group_exit+0x40/0xcc
[162980.037479] [c668fe10] [c002a76c] get_signal+0x47c/0x614
[162980.037570] [c668fe70] [c0007840] do_signal+0x54/0x244
[162980.037654] [c668ff30] [c0007ae8] do_notify_resume+0x34/0x88
[162980.037744] [c668ff40] [c000dae8] do_user_signal+0x74/0xc4
[162980.037781] Instruction dump:
[162980.037821] 7fdff378 81370000 54a3463a 80890020 7d24182e 7c841a14 712a0004 4082ff94
[162980.038014] 2f890000 419e0010 712a0ff0 408200e0 <0fe00000> 54a9000a 7f984840 419d0094
[162980.038216] ---[ end trace c0ceeca8e7a5800a ]---
[162980.038754] BUG: non-zero nr_ptes on freeing mm: 1
[162985.363322] BUG: non-zero nr_ptes on freeing mm: -1

In order to fix this, this patch uses the address space "slices"
implemented for BOOK3S/64 and enhanced to support PPC32 by the
preceding patch.

This patch modifies the context.id on the 8xx to be in the range
[1:16] instead of [0:15] in order to identify context.id == 0 as
not initialised contexts as done on BOOK3S

This patch activates CONFIG_PPC_MM_SLICES when CONFIG_HUGETLB_PAGE is
selected for the 8xx

Alltough we could in theory have as many slices as PMD entries, the
current slices implementation limits the number of low slices to 16.
This limitation is not preventing us to fix the initial issue allthough
it is suboptimal. It will be cured in a subsequent patch.

Fixes: 4b914286 ("powerpc/8xx: Implement support of hugepages")
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In preparation for the following patch which will fix an issue on
the 8xx by re-using the 'slices', this patch enhances the
'slices' implementation to support 32 bits CPUs.

On PPC32, the address space is limited to 4Gbytes, hence only the low
slices will be used.

The high slices use bitmaps. As bitmap functions are not prepared to
handle bitmaps of size 0, this patch ensures that bitmap functions
are called only when SLICE_NUM_HIGH is not nul.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In preparation for the following patch which will enhance 'slices'
for supporting PPC32 in order to fix an issue on hugepages on 8xx,
this patch takes out of page*.h all bits related to 'slices' and put
them into newly created slice.h header files.
While common parts go into asm/slice.h, subarch specific
parts go into respective books3s/64/slice.c and nohash/64/slice.c
'slices'
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

bitmap_or() and bitmap_andnot() can work properly with dst identical
to src1 or src2. There is no need of an intermediate result bitmap
that is copied back to dst in a second step.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Newer gcc will support "-mno-readonly-in-sdata"[1], which makes sure that
the optimization on PPC32 for variables getting moved into the .sdata
section will not apply to const variables (which must be in .rodata).

This was originally noticed in mm/rodata_test.c when rodata_test_data
was not static:

c0695034 g     O .data	00000004 rodata_test_data

After this patch with an updated compiler, this is correctly in .rodata.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82411Reported-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Pull x86 fixes from Thomas Gleixner:
 "A small set of fixes for x86:

   - Add missing instruction suffixes to assembly code so it can be
     compiled by newer GAS versions without warnings.

   - Switch refcount WARN exceptions to UD2 as we did in general

   - Make the reboot on Intel Edison platforms work

   - A small documentation update so text and sample command match"

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation, x86, resctrl: Make text and sample command match
  x86/platform/intel-mid: Handle Intel Edison reboot correctly
  x86/asm: Add instruction suffixes to bitops
  x86/entry/64: Add instruction suffix
  x86/refcounts: Switch to UD2 for exceptions

Pull x86/pti fixes from Thomas Gleixner:
 "Three fixes related to melted spectrum:

   - Sync the cpu_entry_area page table to initial_page_table on 32 bit.

     Otherwise suspend/resume fails because resume uses
     initial_page_table and triggers a triple fault when accessing the
     cpu entry area.

   - Zero the SPEC_CTL MRS on XEN before suspend to address a
     shortcoming in the hypervisor.

   - Fix another switch table detection issue in objtool"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
  objtool: Fix another switch table detection issue
  x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes from the timer departement:

   - Add a missing timer wheel clock forward when migrating timers off a
     unplugged CPU to prevent operating on a stale clock base and
     missing timer deadlines.

   - Use the proper shift count to extract data from a register value to
     prevent evaluating unrelated bits

   - Make the error return check in the FSL timer driver work correctly.
     Checking an unsigned variable for less than zero does not really
     work well.

   - Clarify the confusing comments in the ARC timer code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Forward timer base before migrating timers
  clocksource/drivers/arc_timer: Update some comments
  clocksource/drivers/mips-gic-timer: Use correct shift count to extract data
  clocksource/drivers/fsl_ftm_timer: Fix error return checking

Pull irq fixlet from Thomas Gleixner:
 "Just a documentation update for the missing device tree property of
  the R-Car M3N interrupt controller"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support

Pull btrfs fixes from David Sterba:

 - when NR_CPUS is large, a SRCU structure can significantly inflate
   size of the main filesystem structure that would not be possible to
   allocate by kmalloc, so the kvalloc fallback is used

 - improved error handling

 - fix endiannes when printing some filesystem attributes via sysfs,
   this is could happen when a filesystem is moved between different
   endianity hosts

 - send fixes: the NO_HOLE mode should not send a write operation for a
   file hole

 - fix log replay for for special files followed by file hardlinks

 - fix log replay failure after unlink and link combination

 - fix max chunk size calculation for DUP allocation

* tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix log replay failure after unlink and link combination
  Btrfs: fix log replay failure after linking special file and fsync
  Btrfs: send, fix issuing write op when processing hole in no data mode
  btrfs: use proper endianness accessors for super_copy
  btrfs: alloc_chunk: fix DUP stripe size handling
  btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster
  btrfs: handle failure of add_pending_csums
  btrfs: use kvzalloc to allocate btrfs_fs_info

Pull i2c fixes from Wolfram Sang:
 "A driver fix and a documentation fix (which makes dependency handling
  for the next cycle easier)"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: octeon: Prevent error message on bus error
  dt-bindings: at24: sort manufacturers alphabetically

Pull libnvdimm fixes from Dan Williams:
 "A 4.16 regression fix, three fixes for -stable, and a cleanup fix:

   - During the merge window support for the new ACPI NVDIMM Platform
     Capabilities structure disabled support for "deep flush", a
     force-unit- access like mechanism for persistent memory. Restore
     that mechanism.

   - VFIO like RDMA is yet one more memory registration / pinning
     interface that is incompatible with Filesystem-DAX. Disable long
     term pins of Filesystem-DAX mappings via VFIO.

   - The Filesystem-DAX detection to prevent long terms pins mistakenly
     also disabled Device-DAX pins which are not subject to the same
     block- map collision concerns.

   - Similar to the setup path, softlockup warnings can trigger in the
     shutdown path for large persistent memory namespaces. Teach
     for_each_device_pfn() to perform cond_resched() in all cases.

   - Boaz noticed that the might_sleep() in dax_direct_access() is stale
     as of the v4.15 kernel.

  These have received a build success notification from the 0day robot,
  and the longterm pin fixes have appeared in -next. However, I recently
  rebased the tree to remove some other fixes that need to be reworked
  after review feedback.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  memremap: fix softlockup reports at teardown
  libnvdimm: re-enable deep flush for pmem devices via fsync()
  vfio: disable filesystem-dax page pinning
  dax: fix vma_is_fsdax() helper
  dax: ->direct_access does not sleep anymore

Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - suppress sparse warnings about unknown attributes

 - fix typos and stale comments

 - fix build error of arch/sh

 - fix wrong use of ld-option vs cc-ldoption

 - remove redundant GCC_PLUGINS_CFLAGS assignment

 - fix another memory leak of Kconfig

 - fix line number in error messages of Kconfig

 - do not write confusing CONFIG_DEFCONFIG_LIST out to .config

 - add xstrdup() to Kconfig to handle memory shortage errors

 - show also a Debian package name if ncurses is missing

* tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  MAINTAINERS: take over Kconfig maintainership
  kconfig: fix line number in recursive inclusion error message
  Coccinelle: memdup: Fix typo in warning messages
  kconfig: Update ncurses package names for menuconfig
  kbuild/kallsyms: trivial typo fix
  kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
  kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
  kconfig: Don't leak choice names during parsing
  sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
  kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
  kconfig: add xstrdup() helper
  kbuild: disable sparse warnings about unknown attributes
  Makefile: Fix lying comment re. silentoldconfig

Pull media fixes from Mauro Carvalho Chehab:

  - some build fixes with randconfigs

  - an m88ds3103 fix to prevent an OOPS if the chip doesn't provide the
    right version during probe (with can happen if the hardware hangs)

  - a potential out of array bounds reference in tvp5150

  - some fixes and improvements in the DVB memory mapped API (added for
    kernel 4.16)

* tag 'media/v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: vb2: Makefile: place vb2-trace together with vb2-core
  media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array
  media: dvb: update buffer mmaped flags and frame counter
  media: dvb: add continuity error indicators for memory mapped buffers
  media: dmxdev: Fix the logic that enables DMA mmap support
  media: dmxdev: fix error code for invalid ioctls
  media: m88ds3103: don't call a non-initalized function
  media: au0828: add VIDEO_V4L2 dependency
  media: dvb: fix DVB_MMAP dependency
  media: dvb: fix DVB_MMAP symbol name
  media: videobuf2: fix build issues with vb2-trace
  media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 part

Pull watchdog fixes from Wim Van Sebroeck:

 - rave-sp: add NVMEM dependency

 - build fixes for i6300esb_wdt, xen_wdt and sp5100_tco

* tag 'linux-watchdog-4.16-fixes-1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: sp5100_tco.c: fix potential build failure
  watchdog: xen_wdt: fix potential build failure
  watchdog: i6300esb: fix build failure
  watchdog: rave-sp: add NVMEM dependency

Pull KVM fixes from Radim Krčmář:
 "x86:

   - fix NULL dereference when using userspace lapic

   - optimize spectre v1 mitigations by allowing guests to use LFENCE

   - make microcode revision configurable to prevent guests from
     unnecessarily blacklisting spectre v2 mitigation feature"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix vcpu initialization with userspace lapic
  KVM: X86: Allow userspace to define the microcode version
  KVM: X86: Introduce kvm_get_msr_feature()
  KVM: SVM: Add MSR-based feature support for serializing LFENCE
  KVM: x86: Add a framework for supporting MSR-based features

The cond_resched() currently in the setup path needs to be duplicated in
the teardown path. Rather than require each instance of
for_each_device_pfn() to open code the same sequence, embed it in the
helper.

Link: https://github.com/intel/ixpdimm_sw/issues/11
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Fixes: 71389703 ("mm, zone_device: Replace {get, put}_zone_device_page()...")
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Re-enable deep flush so that users always have a way to be sure that a
write makes it all the way out to media. Writes from the PMEM driver
always arrive at the NVDIMM since movnt is used to bypass the cache, and
the driver relies on the ADR (Asynchronous DRAM Refresh) mechanism to
flush write buffers on power failure. The Deep Flush mechanism is there
to explicitly write buffers to protect against (rare) ADR failure.  This
change prevents a regression in deep flush behavior so that applications
can continue to depend on fsync() as a mechanism to trigger deep flush
in the filesystem-DAX case.

Fixes: 06e8ccda ("acpi: nfit: Add support for detect platform CPU cache...")
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

I have recently picked up Kconfig patches to my tree without any
declaration.  Making it official now.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>