Improve error messages of 'perf probe --line' mode.

Currently 'perf probe' shows the "Debuginfo analysis failed" message with
an error code when the given symbol is not found:

  -----
  # perf probe -L page_cgroup_init_flatmem
  Debuginfo analysis failed. (-2)
    Error: Failed to show lines.
  -----

But -2 (-ENOENT) means that the given source line or function was not
found. With this patch, 'perf probe' shows the correct error message:

  -----
  # perf probe -L page_cgroup_init_flatmem
  Specified source line is not found.
    Error: Failed to show lines.
  -----

There is also another debug error code is shown in the same function
after get_real_path(). This removes that too.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140606071406.6788.47850.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix an error message when failed to find given address in --vars
mode.

Without this fix, perf probe -V doesn't show the final "Error"
message if it fails to find given source line. Moreover, it
tells it fails to find "variables" instead of the source line.
  -----
  # perf probe -V foo@bar
  Failed to find variables at foo@bar (0)
  -----
The result also shows mysterious error code. Actually the error
returns 0 or -ENOENT means that it just fails to find the address
of given source line. (0 means there is no matching address,
and -ENOENT means there is an entry(DIE) but it has no instance,
e.g. an empty inlined function)

This fixes it to show what happened and the final error message
as below.
  -----
  # perf probe -V foo@bar
  Failed to find the address of foo@bar
    Error: Failed to show vars.
  -----
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140606071359.6788.84716.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Show error code and description only in verbose mode if 'perf probe'
command failed.

Current 'perf probe' shows error code with final error message, and that
is meaningless for many users.

This changes error messages to show the error code and its description
only in verbose mode (-v option).

Without this patch:
  -----
  # perf probe -a do_execve@hoge
  Probe point 'do_execve@hoge' not found.
    Error: Failed to add events. (-2)
  -----

With this patch, normally the message doesn't show the misterious error
number:
  -----
  # perf probe -a do_execve@hoge
  Probe point 'do_execve@hoge' not found.
    Error: Failed to add events.
  -----

And in verbose mode, it also shows additional error messages as below:
  -----
  # perf probe -va do_execve@hoge
  probe-definition(0): do_execve@hoge
  symbol:do_execve file:hoge line:0 offset:0 return:0 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (6 entries long)
  Using /lib/modules/3.15.0-rc8+/build/vmlinux for symbols
  Open Debuginfo file: /lib/modules/3.15.0-rc8+/build/vmlinux
  Try to find probe point from debuginfo.
  Probe point 'do_execve@hoge' not found.
    Error: Failed to add events. Reason: No such file or directory (Code: -2)
  -----
Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140606071352.6788.76943.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Improve the error message if we can not find given member in the given
structure. Currently perf probe shows a wrong error message as below.

  -----
  # perf probe getname_flags:65 "result->BOGUS"
  result(type:filename) has no member BOGUS.
  Failed to find 'result' in this function.
    Error: Failed to add events. (-22)
  -----

The first message is correct, but the second one is not, since we didn't
fail to find a variable but fails to find the member of given variable.

  -----
  # perf probe getname_flags:65 "result->BOGUS"
  result(type:filename) has no member BOGUS.
    Error: Failed to add events. (-22)
  -----

With this patch, the error message shows only the first one.  And if we
really failed to find given variable, it tells us so.

  -----
  # perf probe getname_flags:65 "BOGUS"
  Failed to find 'BOGUS' in this function.
    Error: Failed to add events. (-2)
  -----
Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140606071345.6788.23744.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before:

  [acme@zoo linux]$ make -C tools/perf -f tests/make make_static
  make: Entering directory `/home/git/linux/tools/perf'
  - make_static: cd . && make -f Makefile DESTDIR=/tmp/tmp.JcWuM4Zu9f LDFLAGS=-static
  make: *** [make_static] Error 1
  make: Leaving directory `/home/git/linux/tools/perf'
  [acme@zoo linux]$

After:

  [acme@zoo linux]$ make -C tools/perf -f tests/make make_static
  make: Entering directory `/home/git/linux/tools/perf'
  - make_static: cd . && make -f Makefile DESTDIR=/tmp/tmp.X3su83i14u LDFLAGS=-static
  cd . && make -f Makefile DESTDIR=/tmp/tmp.X3su83i14u LDFLAGS=-static
    BUILD:   Doing 'make -j4' parallel build
  config/Makefile:303: *** No static glibc found, please install glibc-static.  Stop.
  make[1]: *** [all] Error 2
    test: test -x ./perf
  make: Leaving directory `/home/git/linux/tools/perf'
  [acme@zoo linux]$

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h4kby5wyp6nfev3882rzm3r9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When the user does:

  make -C tools/perf LDFLAGS=-static

asking for a static build, and the glibc-static (or equivalent) is not
found, the message wasn't clear, stating that one of glibc-devel or
glibc-static wasn't installed, clarify it checking if -static is
present in LDFLAGS.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7e0sfobbzgeydzi9gsz8ss3m@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: NStephane Eranian <eranian@google.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: mpe@ellerman.id.au
Cc: benh@kernel.crashing.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1400743210-32289-4-git-send-email-khandual@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Adding perf record support for new branch stack filter criteria
PERF_SAMPLE_BRANCH_COND.
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: NStephane Eranian <eranian@google.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1400743210-32289-2-git-send-email-khandual@linux.vnet.ibm.com
Cc: mpe@ellerman.id.au
Cc: benh@kernel.crashing.org
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Fix perf probe to find correct variable DIE which has location or
external instance by tracking down the lexical blocks.

Current die_find_variable() expects that the all variable DIEs
which has DW_TAG_variable have a location. However, since recent
dwarf information may have declaration variable DIEs at the
entry of function (subprogram), die_find_variable() returns it.

To solve this problem, it must track down the DIE tree to find
a DIE which has an actual location or a reference for external
instance.

e.g. finding a DIE which origin is <0xdc73>;

 <1><11496>: Abbrev Number: 95 (DW_TAG_subprogram)
    <11497>   DW_AT_abstract_origin: <0xdc42>
    <1149b>   DW_AT_low_pc      : 0x1850
[...]
 <2><114cc>: Abbrev Number: 119 (DW_TAG_variable) <- this is a declaration
    <114cd>   DW_AT_abstract_origin: <0xdc73>
 <2><114d1>: Abbrev Number: 119 (DW_TAG_variable)
[...]
 <3><115a7>: Abbrev Number: 105 (DW_TAG_lexical_block)
    <115a8>   DW_AT_ranges      : 0xaa0
 <4><115ac>: Abbrev Number: 96 (DW_TAG_variable) <- this has a location
    <115ad>   DW_AT_abstract_origin: <0xdc73>
    <115b1>   DW_AT_location    : 0x486c        (location list)
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20140529121930.30879.87092.stgit@ltc230.yrl.intra.hitachi.co.jpSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Fix a segfault bug by asking for variable it doesn't find.
Since the convert_variable() didn't handle error code returned
from convert_variable_location(), it just passed an incomplete
variable field and then a segfault was occurred when formatting
the field.

This fixes that bug by handling success code correctly in
convert_variable(). Other callers of convert_variable_location()
are correctly checking the return code.

This bug was introduced by following commit. But another hidden
erroneous error handling has been there previously (-ENOMEM case).

 commit 3d918a12Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20140529105232.28251.30447.stgit@ltc230.yrl.intra.hitachi.co.jpSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Currently 'make help' message has such hint:

   use "make prefix=<path> <install target>" to install to a particular
       path like make prefix=/usr/local install install-doc

But this is misleading, when I specify "prefix=/usr/local", it has got no
respect at all.

This is because that, "DESTDIR" is considered first. In this case, "DESTDIR"
has an empty value, so "prefix" is honored. However, "prefix" is unconditionally
assigned to $HOME, regardless of what it is set to from command line. So our
"prefix" setting got no respect and the actual destination falls back to $HOME.

This patch fixes this issue and corrects the help message.
Signed-off-by: NJianyu Zhan <nasa4836@gmail.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1401727474-19370-1-git-send-email-nasa4836@gmail.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

If the perf record command is interrupted in record__mmap_read_all
function, the 'done' is set and err has the latest poll return
value, which is most likely positive number (= number of pollfds
ready to read).

This 'positive err' is then propagated to the exit code, resulting
in not finishing the perf.data header properly, causing following
error in report:

  # perf record -F 50000 -a

  ---
  make the system real busy, so there's more chance
  to interrupt perf in event writing code
  ---

  ^C[ perf record: Woken up 16 times to write data ]
  [ perf record: Captured and wrote 30.292 MB perf.data (~1323468 samples) ]

  # perf report --stdio > /dev/null
  WARNING: The perf.data file's data size field is 0 which is unexpected.
  Was the 'perf record' command properly terminated?

Fixing this by checking for positive poll return value
and setting err to 0.
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401732126-19465-1-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.

The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:

  $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio

Performance report:
   9.70%  perf  [.] perf_hpp__should_skip

Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.

Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.

Performance counter stats for (10 runs):
  before:
   358,319,732,626      cycles                    ( +-  0.55% )
   467,129,581,515      instructions              #    1.30  insns per cycle          ( +-  0.00% )

     150.943975206 seconds time elapsed           ( +-  0.62% )

  now:
   278,785,972,990      cycles                    ( +-  0.12% )
   370,146,797,640      instructions              #    1.33  insns per cycle          ( +-  0.00% )

     116.416670507 seconds time elapsed           ( +-  0.31% )
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

There's no need to setup elide of sort_dso sort entry again
with symbol_conf.dso_list list.

The only difference were list names of memory mode data,
which does not make much sense to me.
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400858147-7155-2-git-send-email-jolsa@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Convert "==" into "=" in ui_browser__warning assignment.

Bug description: https://bugzilla.kernel.org/show_bug.cgi?id=76751Reported-by: NDavid Binderman <dcb314@hotmail.com>
Signed-off-by: NDianfang Zhang <zhangdianfang@huawei.com>
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jean Delvare <jdelvare@suse.de>
Link: http://lkml.kernel.org/r/20140530154709.GC1202@kernel.org
[ changed the changelog a bit ]
Signed-off-by: NJiri Olsa <jolsa@kernel.org>

SYSFS_PATH and PROC_PATH environment variables now let the user override
the detection of sysfs and proc locations for testing purposes.
Signed-off-by: NCody P Schafer <dev@codyps.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1401236684-10579-2-git-send-email-dev@codyps.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

This fixes lookups like "vi -t event_format"
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20140528081918.GA28567@linutronix.deSigned-off-by: NJiri Olsa <jolsa@kernel.org>

We were just showing "libperl: OFF", unlike other features where we
present the user with a message helping have a feature built in.

Fix it by adding the following message:

config/Makefile:450: Missing perl devel files. Disabling perl scripting support, consider installing perl-ExtUtils-Embed
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-t7yeud34ehimlfi6pklb29p7@git.kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

When the audit-libs devel package is not found at build time we disable
the 'trace' command, as we are not able to map syscall numbers to
strings, but then the message the user is presented is cryptic:

  [root@zoo linux]# trace ls
  perf: 'ls' is not a perf-command. See 'perf --help'.

Fix it by presenting a more helpful message:

  [root@zoo linux]# trace l
  trace command not available: missing audit-libs devel package at build time.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uxeunqetd0sgxyibusapen9a@git.kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Now it adds a new testcase to verify --children option working
correctly.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-28-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

In various histogram test cases, fake symbols are used as raw numbers.
Define macros for each pid, map, symbols so that it can increase
readability somewhat.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-27-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

When reset_output_field() is called, also reset field/sort order to
NULL so that it can have the default values.  It's needed for testing.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
CC: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-26-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

With current output field change, GTK browser cannot display callchain
information correctly since it couldn't determine where the symbol
column is.  This is a problem - just for now I changed to use the last
column since it'll work for most cases.

Also it has a same problem of the percentage as stdio code.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-25-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

On stdio, there's a problem that it shows invalid values for
callchains in cumulated hist entries.  It's because it only cares
about the self period.  But with --children behavior, we always add
callchain info to the cumulated entries so it should use the value in
that case.

Before:

  # Children      Self  Command      Shared Object            Symbol
  # ........  ........  .......  .................  ................
  #
      61.22%     0.32%  swapper  [kernel.kallsyms]      [k] cpu_idle
                    |
                    --- cpu_idle
                       |
                       |--16530.76%-- start_secondary
                       |
                       |--2758.70%-- rest_init
                       |          start_kernel
                       |          x86_64_start_reservations
                       |          x86_64_start_kernel
                        --6837850969203030.00%-- [...]

After:

  # Children      Self  Command      Shared Object            Symbol
  # ........  ........  .......  .................  ................
  #
      61.22%     0.32%  swapper  [kernel.kallsyms]      [k] cpu_idle
                    |
                    --- cpu_idle
                       |
                       |--85.70%-- start_secondary
                       |
                        --14.30%-- rest_init
                                  start_kernel
                                  x86_64_start_reservations
                                  x86_64_start_kernel
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-24-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Now perf top and perf report will show children column by default if
it has callchain information.
Requested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Tested-by: NArun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-23-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Add top.children config option for setting default value of
callchain accumulation.  It affects the output only if one of
-g or --call-graph option is given as well.

A user can write .perfconfig file like below to enable accumulation
by default:

  $ cat ~/.perfconfig
  [top]
  children = true

And it can be disabled through command line:

  $ perf top --no-children
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-22-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The --children option is for showing accumulated overhead (period)
value as well as self overhead.  It should be used with one of -g or
--call-graph option.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-21-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Reuse hist_entry_iter__add() function to share the similar code with
perf report.  Note that it needs to be called with hists.lock so tweak
some internal functions not to deadlock or hold the lock too long.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Link: http://lkml.kernel.org/r/1401335910-16832-20-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The new ->add_entry_cb() will be called after an entry was added to
the histogram.  It's used for code sharing between perf report and
perf top.  Note that ops->add_*_entry() should set iter->he properly
in order to call the ->add_entry_cb.

Also pass @arg to the callback function.  It'll be used by perf top
later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/87k393g999.fsf@sejong.aot.lge.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Depending on the configuration perf inserts/removes the Children
column in the output automatically.  But it might not be what user
wants if [s]he give --fields option explicitly.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-18-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Add report.children config option for setting default value of
callchain accumulation.  It affects the report output only if
perf.data contains callchain info.

A user can write .perfconfig file like below to enable accumulation
by default:

  $ cat ~/.perfconfig
  [report]
  children = true

And it can be disabled through command line:

  $ perf report --no-children
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-17-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The --children option is for showing accumulated overhead (period)
value as well as self overhead.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-16-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Sometimes it needs to disable some columns at runtime.  Add help
functions to support that.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-15-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

If -g cumulative option is given, it needs to show entries which don't
have self overhead.  So apply percent-limit to accumulated overhead
percentage in this case.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-14-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Print accumulated stat of a hist entry if requested.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-13-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Print accumulated stat of a hist entry if requested.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-12-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Print accumulated stat of a hist entry if requested.

To do that, add new HPP_PERCENT_ACC_FNS macro and generate a
perf_hpp_fmt using it.  The __hpp__sort_acc() function sorts entries
by accumulated period value.  When accumulated periods of two entries
are same (i.e. single path callchain) put the caller above since
accumulation tends to put callers on higher position for obvious
reason.

Also add "overhead_children" output field to be selected by user.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-11-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

When accumulating callchain entry, also save current snapshot of the
chain so that it can show the rest of the chain.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-10-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The callchain_cursor_snapshot() is for saving current status of the
callchain.  It'll be used to accumulate callchain information for each node.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-9-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

It is possble that a callchain has cycles or recursive calls.  In that
case it'll end up having entries more than 100% overhead in the
output.  In order to prevent such entries, cache each callchain node
and skip if same entry already cumulated.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-8-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>