[Why]
It is confusing to sinks if we send VSC SDP only on some format. Today we
signal colorimetry format using MSA while in formats like sRGB.
But when we switch to BT2020 we set the bit to ignore MSA  colorimetry and
instead use the colorimetry information in the VSC SDP.

But if sink supports signaling of colorimetry via VSC SDP we should always
set the MSA MISC1 bit 6, instead of doing so selectively.

[How]
If sink supports signaling of colorimetry via VSC SDP, and we are sending
the colorimetry info via VSC SDP with packet revision 05h, then always
set MSA MISC1 bit 6.
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
If acquire/release DSC resource sequence is affected by a regression,
it can happen that the already-in-use DSC HW block is being wrongly
re-used for a different pipe. The reverse is also possible, i.e.
already-disabled DSC HW block could be disabled from other context.

[how]
Read back the enable state of DSC HW and report an error if duplicate
enable or disable was attempted.
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Currently made a change where disable_output is called using signal_type.
Using actual signal_type when calilng disable_output in power_down_encoders
would make DP to HDMI dongle not light up on boot. As it would have signal_type
SIGNAL_TYPE_DISPLAY_PORT.

[HOW]
Set signal_type to SIGNAL_TYPE_NONE unless it is eDP.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For unknown reason, immediate flip with host VM translation on NV12
surface will underflow on last row of PTE.

[How]
Hack chroma viewport height to make fetch one more row of PTE.
Note that this will cause hubp underflow on all video underlay
cases, but the underflow is not user visible since it is in
blank region.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
V.Active dram clock change workaround need a small modification for DMLv2
to ensure that the dummy p-state check doesn't fail.
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Support for DMUB only depends on support for DC. It doesn't use floating
point so we don't need to guard it by any specific DCN revision.

[How]
Drop the guards and cleanup the newlines around each one.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DC can utilize the DMUB server to send commands to the DMUB but it's
the DM responsibility to pass it the service to use.

[How]
Create the dc_dmub_srv after we finish initializing the dmub_srv.
Cleanup the dc_dmub_srv before destroying the dmub_srv or dc.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DC will use DMUB for command submission and flow control during
initialization.

Register offloading as well as submitting some BIOS commands are part
of the DC internal interface but are guarded behind debug options.

It won't be functional in amdgpu_dm yet since we don't pass the
DMUB service to DC for use.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The DMCUB firmware version can be read using the AMDGPU_INFO ioctl
or the amdgpu_firmware_info debugfs entry.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need DMCUB on Renoir to support DMCU and PHY initialization.
The DMUB service provides a mechanism to load the DMCUB.

[How]
Include the DMUB service in amdgpu_dm.

Frontdoor loading of the DMCUB firmware needs to happen via PSP. To
pass the firmware to PSP we need to hand it off to the firmware list
in the base driver during software initialization.

Most of the DMUB service can technically be initialized at this point
in time, but we don't want to be allocating framebuffer memory for
hardware that doesn't support the DMCUB and in order to check that we
need to be able to read registers - something DM helpers aren't setup
to do in software initialization.

So everything but the service creation itself will get deferred to
hardware initialization.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
PSP version format is AB.CD.EF.GH, where CD and GH is the main version.
current psp version check for dmcub loading dmcu check 0x00110029, in
case of some psp version eg: 0x00110227 which main version should be
0x00110027, will result in unexpeceted dmcub loading dmcu FW.

[How]
Add psp version mask 0x00FF00FF for checking version.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DMCU isn't intiliazed properly by dmcub loading due to dmcub initialize
sequence.

[How]
Change dmcu init sequece to meet dmcub initilize.
Signed-off-by: NYongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The DMUB service is the interface to the DMCUB.

It's required to support Renoir features so it will be enabled and
compiled automatically when the Renoir display engine is enabled via
CONFIG_DRM_AMD_DC_DCN2_1.

DMUB code will initially be guarded by CONFIG_DRM_AMD_DC_DMUB and later
switched to CONFIG_DRM_AMD_DC_DCN2_1 with the config option dropped.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The interface to the DMCUB won't be through DC itself. DC will instead
call into the DMUB interface introduced with a future change.

The CONFIG_DRM_AMD_DC_DMUB defines will still be used for now but will
be dropped at the end of the series.

Since this define was never configurable in the first place this code
wasn't used.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DMCUB ucode requires secure loading through PSP. This is already
supported in PSP as GFX_FW_TYPE_DMUB, it just needs to be mapped from
AMDGPU_UCODE_ID_DMCUB to GFX_FW_TYPE_DMUB.

DMUB is a shorthand name for DMCUB and can be used interchangeably.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The DMCUB is a secondary DMCU (Display MicroController Unit) that has
its own separate firmware. It's required for DMCU support on Renoir.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently pointer aconnector is being dereferenced by the call to
to_dm_connector_state before it is being null checked, this could
lead to a null pointer dereference.  Fix this by checking that
aconnector is null before dereferencing it.

Addresses-Coverity: ("Dereference before null check")
Reviewed-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Adding encoder atomic check to find vcpi slots for a connector
- Using DRM helper functions to calculate PBN
- Adding connector atomic check to release vcpi slots if connector
loses CRTC
- Calculate  PBN and VCPI slots only once during atomic
check and store them on crtc_state to eliminate
redundant calculation
- Call drm_dp_mst_atomic_check to verify validity of MST topology
during state atomic check

v2: squashed previous 3 separate patches, removed DSC PBN calculation,
and added PBN and VCPI slots properties to amdgpu connector

v3:
- moved vcpi_slots and pbn properties to dm_crtc_state and dc_stream_state
- updates stream's vcpi_slots and pbn on commit
- separated patch from the DSC MST series

v4:
- set vcpi_slots and pbn properties to dm_connector_state
- copy porperties from connector state on to crtc state

v5:
- keep the pbn and vcpi values only on connnector state
- added a void pointer to the stream state instead on two ints,
because dc_stream_state is OS agnostic. Pointer points to the
current dm_connector_state.

v6:
- Remove new param from stream

v7:
- Fix error with using max capable bpc

v8:
- squash in fix from Gustavo A. R. Silva
Reviewed-by: NLyude Paul <lyude@redhat.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

flush/cancel delayed works before doing finalization
to avoid concurrently requests.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sysfs interface to read pcie speed&width info on navi1x.

v2: fix warning (trivial)
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
On Navi10, and presumably arcterus, updating pp_table via sysfs would
not re-scale the maximum possible power limit one can set. On navi10,
the SMU code ignored the power percentage overdrive setting entirely,
and would not allow you to exceed the default power limit at all.

[How]
Adding a function to the SMU interface to get the pptable version of the
default power limit allows ASIC-specific code to provide the correct
maximum-settable power limit for the current pptable.

v3: fix spelling (Alex)
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NMatt Coffin <mcoffin13@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Before this patch, navi10 overdrive settings could not be printed via
pp_od_clk_voltage

[How]
Implement printing for the overdrive settings for the following clocks
in navi10's ppt print_clk_levels implementation:

* SMU_OD_SCLK
* SMU_OD_MCLK
* SMU_OD_VDDC_CURVE
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NMatt Coffin <mcoffin13@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Before this patch, there was no way to set the gfxclk voltage curve in
the overdrive settings for navi10 through pp_od_clk_voltage

[How]
Add the required implementation to navi10's ppt dpm table editing
implementation, similar to the vega20 implementation and interface.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NMatt Coffin <mcoffin13@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Before this patch, there was no way to use pp_od_clk_voltage on navi

[How]
Similar to the vega20 implementation, but using the common smc_v11_0
headers, implemented the pp_od_clk_voltage API for navi10's pptable
implementation
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NMatt Coffin <mcoffin13@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

flush/cancel delayed works before doing finalization
to avoid concurrently requests.
Signed-off-by: NJesse Zhang <zhexi.zhang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This fixes the formatting on one comment and consolidates the
pci_get_drvdata() into the radeon_suspend_kms().
Signed-off-by: NKyle Mahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When a custom powerplay table is provided, we need to update
the OD VDDC flag to avoid AVFS being enabled when it shouldn't be.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

xgmi, ras, hdcp and dtm ta are actually separated ucode and
need to handled case by case to upload to psp.

We support the case that ta binary have one or multiple of
them built-in. As a result, the driver should check each ta
binariy's availablity before decide to upload them to psp.

In the terminate (unload) case, the driver will check the
context readiness before perform unload activity. It's fine
to keep it as is.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When a custom powerplay table is provided, we need to update
the OD VDDC flag to avoid AVFS being enabled when it shouldn't be.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is to improve the performance in the compute mode
for vega10. For example, the original performance for a rocm
bandwidth test: 2G internal GPU copy, is about 99GB/s.
With the idle power features disabled dynamically, the porformance
is promoted to about 215GB/s.
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

OD is not supported on Arcturus. Thus the
pp_od_clk_voltage sysfs interface is also not supported.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It will cause modprobe atombios stuck problem in raven2 if it doesn't
allow direct upload save restore list from gfx driver.
So it needs to allow direct upload save restore list for raven2
temporarily.
Signed-off-by: Nchangzhu <Changfeng.Zhu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes: 83a7772b ("drm/sched: Use completion to wait for sched->thread idle v2.")
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Problem:
During GPU reset we call the GPU scheduler to suspend it's
thread, those two functions in amdgpu also suspend and resume
the sceduler for their needs but this can collide with GPU
reset in progress and accidently restart a suspended thread
before time.

Fix:
Serialize with GPU reset.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When the sched thread is parked we assume ring_mirror_list is
not accessed from here.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 89b3d864.

We will do a proper fix in next patch.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Removes thread park/unpark hack from drm_sched_entity_fini and
by this fixes reactivation of scheduler thread while the thread
is supposed to be stopped.

v2: Per sched entity completion.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

vega20 only requires all devices be set to same pstate level for low
pstate and not high.
Signed-off-by: NJonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: NEvan Quan <Evan.Quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the asic callback function of get_pcie_replay_count is not implement on navi asic,
it will cause null pinter error when read this interface.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKent Russell <kent.russell@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>