- 21 9月, 2011 2 次提交
-
-
由 Kukjin Kim 提交于
Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 04 3月, 2011 1 次提交
-
-
由 Lars-Peter Clausen 提交于
The gta02 mach file references the ohci device. So we need to select S3C_DEV_USB_HOST to have the device available. This fixes the following linker errors: arch/arm/mach-s3c2440/built-in.o: In function 'gta02_machine_init': mach-gta02.c:(.init.text+0x370): undefined reference to 's3c_ohci_set_platdata' arch/arm/mach-s3c2440/built-in.o:(.init.data+0xac): undefined reference to 's3c_device_ohci' Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 08 12月, 2010 1 次提交
-
-
由 Vasily Khoruzhick 提交于
Currently the {set,get}_pull callbacks of the s3c24xx_gpiocfg_default structure are initalized via s3c_gpio_{get,set}pull_1up. This results in a linker error when only CONFIG_CPU_S3C2442 is selected: arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f4): undefined reference to `s3c_gpio_getpull_1up' arch/arm/plat-s3c24xx/built-in.o:(.data+0x13f8): undefined reference to `s3c_gpio_setpull_1up' The s3c2442 has pulldowns instead of pullups compared to the s3c2440. The method of controlling them is the same though. So this patch modifies the existing s3c_gpio_{get,set}pull_1up helper functions to take an additional parameter deciding whether the pin has a pullup or pulldown. The s3c_gpio_{get,set}pull_1{down,up} functions then wrap that functions passing either S3C_GPIO_PULL_UP or S3C_GPIO_PULL_DOWN. Furthermore this patch sets up the s3c24xx_gpiocfg_default.{get,set}_pull fields in the s3c244{0,2}_map_io function to the new pulldown helper functions. Based on patch from "Lars-Peter Clausen" <lars@metafoo.de> Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 04 12月, 2010 1 次提交
-
-
由 Ben Dooks 提交于
The MACH_MINI2440 entry requires the backlight LED driver, but this subsystem has not been enabled and the select of LEDS_TRIGGER_BACKLIGHT alone is insufficient to enable the necessary bits of the LED driver. Add NEW_LEDS, LEDS_CLASS and LEDS_TRIGGER to the select to allow the kernel to link. This fixes the following error: drivers/built-in.o: In function `led_trigger_set': /home/ben/linux.git/drivers/leds/led-triggers.c:116: undefined reference to `led_brightness_set' Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 30 10月, 2010 1 次提交
-
-
由 Abdoulaye Walsimou Gaye 提交于
* kconfig symbols defined in arch/arm/mach-s3c2440/Kconfig are only available when ARCH_S3C2410 is selected, so no need to make some of them depend on ARCH_S3C2410. * fix CPU_S3C24405B typo in "config S3C2440_DMA". * mini2440: remove unconditionally select of SND_S3C24XX_SOC_S3C24XX_UDA134X. Those fixes avoid the following warnings at make time: scripts/kconfig/qconf arch/arm/Kconfig warning: (MACH_MINI2440 && ARCH_S3C2410) selects SND_S3C24XX_SOC_S3C24XX_UDA134X which has unmet direct dependencies (SND_S3C24XX_SOC && ARCH_S3C2410) warning: (CPU_S3C2440 && ARCH_S3C2410 && S3C2410_DMA) selects S3C2440_DMA which has unmet direct dependencies (ARCH_S3C2410 && CPU_S3C24405B) warning: (CPU_S3C2440 && ARCH_S3C2410 || CPU_S3C2442 && ARCH_S3C2410) selects CPU_S3C244X which has unmet direct dependencies (!ARCH_S3C2410) Signed-off-by: NAbdoulaye Walsimou Gaye <awg@embtoolkit.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 12 5月, 2010 1 次提交
-
-
由 Vasily Khoruzhick 提交于
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NDenis Grigoriev <dgreenday@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 06 5月, 2010 1 次提交
-
-
由 Ben Dooks 提交于
Add the necessary gpio configuration helper for the devices which have a single-bit pull-up resistor disabled. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 02 2月, 2010 4 次提交
-
-
由 Ben Dooks 提交于
Remove the old common S3C2440 and S3C2442 SoC support from plat-s3c24xx into mach-s3c2440 now this directory is serving both SoCs. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the remaining S3C2442 code into mach-s3c2440 as there is only one file currently in there and these two SoCs are very similar. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Fix the entries for SMDK2440 should have allowed for S3C2440 or S3C2440 SoC selection but this depended on ARCH_S3C2440 which has not been around for a while. Remove the dependency to allow this to be selected. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the pair of machines in arch/arm/mach-s3c2442 into the mach-s3c2440 directory as the S3C2440 and S3C2442 are very close. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 01 12月, 2009 1 次提交
-
-
由 Ben Dooks 提交于
Add a driver to provide DVS for the Simtec Osiris module to reduce the power consumption whilst idling. The DVS driver alters the voltage supplied to the ARM core depending on the frequency it is running at. The driver itself does not do any of the frequency alteration, which is left up to the cpufreq driver. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NSimtec Linux Team <linux@simtec.co.uk> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 09 11月, 2009 1 次提交
-
-
由 Michael Roth 提交于
Additionally, some excessive newlines removed. Signed-off-by: NMichael Roth <mroth@nessie.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 10月, 2009 1 次提交
-
-
由 Ben Dooks 提交于
Fix missing select of S3C_DEV_USB_HOST when building for mini2440 only. Fixes the following error: built-in.o: undefined reference to `s3c_device_usb` Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 17 9月, 2009 1 次提交
-
-
由 Ben Dooks 提交于
A number of machines that need s3c_device_nand present do not select this in their Kconfig entries. Add the necessary selection of the configuration S3C_DEV_NAND so that we avoid the following error: arch/arm/mach-s3c2410/built-in.o: In function `bast_map_io': arch/arm/mach-s3c2410/mach-bast.c:634: undefined reference to `s3c_device_nand' arch/arm/mach-s3c2412/built-in.o: In function `s3c2412_init_uarts': arch/arm/mach-s3c2412/s3c2412.c:109: undefined reference to `s3c_device_nand' arch/arm/mach-s3c2412/built-in.o: In function `jive_machine_init': arch/arm/mach-s3c2412/mach-jive.c:673: undefined reference to `s3c_device_nand' Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 31 7月, 2009 2 次提交
-
-
由 Ben Dooks 提交于
Add CPU frequency scalling support to the Simtec Osiris. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Add entries to select the crystal to select for each different supported board. This information is then available for anything else requiring this, such as the CPUFreq PLL tables. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 16 6月, 2009 1 次提交
-
-
由 Michel Pollet 提交于
The MINI2440 is a chinese made s3c2440 development board with a large set of peripherals. This patch provides machine support for almost all the features of the board. Since it can come with various "options" fitted, a kernel parameter is used to specify the lcd size, backlight control and touchscreen. Signed-off-by: NMichel Pollet <buserror@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 07 5月, 2009 1 次提交
-
-
由 Ben Dooks 提交于
Add common definition for USB OHCI platform device, add a Kconfig to selectively compile it and add update all the users. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 18 12月, 2008 1 次提交
-
-
由 Ben Dooks 提交于
Add Kconfig entries to allow more GPIO space to be specified depending on the machine(s) selected. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 16 12月, 2008 1 次提交
-
-
由 Ben Dooks 提交于
Only certain boards need these clocks, and they are not available on some CPUs (such as the S3C24A0) so remove them from arch/arm/plat-s3c24xx/clock.c and into their own file with appropriate Kconfig entries. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 27 11月, 2008 1 次提交
-
-
由 Russell King 提交于
Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: NNicolas Pitre <nico@marvell.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Acked-by: NBrian Swetland <swetland@google.com> Acked-by: NEric Miao <eric.miao@marvell.com> Acked-by: NNicolas Bellido <ml@acolin.be> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 7月, 2008 1 次提交
-
-
由 Ramax Lo 提交于
Add basic support for AT2440EVB board based on Samsung S3C2440 SoC. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRamax Lo <ramaxlo@gmail.com>
-
- 03 7月, 2008 1 次提交
-
-
由 Ben Dooks 提交于
Change the (as yet unused) IDE bus on the Simtec Anubis board to use pata_platform and thus libata to provide IDE support. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 22 7月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
Update the Kconfig to create configuration options based on which CPUs are supported for the low level serial code. This means that the debug macros can be optimised for the type(s) of CPU that are being used. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 2月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
The following patch and script moves the arch/arm/mach-s3c2410 directory into arch/arm/plat-s3c24xx for the generic core code and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files Include directory include/asm-arm/plat-s3c24xx is added for the core include files. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-