- 07 10月, 2017 20 次提交
-
-
由 Eric Dumazet 提交于
It will be a bit more expensive to get the head of rtx queue once rtx queue is converted to an rb-tree. We can avoid this extra cost in case tp->lost_skb_hint is set. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_write_queue_tail() call can be factorized. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Since the upcoming rtx rbtree will add some extra code, it is time to not inline this fat function anymore. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Geeralize private netem_rb_to_skb() TCP rtx queue will soon be converted to rb-tree, so we will need skb_rbtree_walk() helpers. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-10-06 This series contains updates to i40e and i40evf only. Rami fixes a typo in the code comments. Mitch adds an ethtool private flag to control source pruning to resolve an issue where our default behavior is to enable source pruning which breaks ARP monitoring in channel bonding. Fixes a couple of register definitions, which were incorrect. Jake fixes an issue with multiple logical CPUs per core (simultaneous multithreading - SMT) and how we set an affinity hint based on the v_idx of that q_vector, which is an incremental value and might lead to multiple offline CPUs being assigned to a q_vector. Instead, we should only assign hints for CPUs which are online, so look to use cpumask_local_spread(). Also fixed a VF VLAN tag stripping issue, where the flag created to change this feature was seen as unchangeable. Lastly, organized and re-numbered the feature flags. Alan re-enables PTP L4 for XL710 devices with firmware version 6.0 or greater, now that the previous bug in the older firmware is fixed. Implements the PCI error handlers for reset_prepare() and reset_done() to allow us to handle function level resets. Alice cleans up code that was added to the incorrect function during a merge. Filip adds a change to display an error message when a module is inserted that does not meet the thermal requirements, Talking Heads "Burning Down the House" comes to mind. Also fixed a flow director filter issue where a variable was not being cleared which stores the filter number to be removed from the list when the firmware refused to add the requested filter. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Cleanup patches to make checkpatch happy, by Sven Eckelmann (3 patches) ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjorn Helgaas 提交于
Use pci_ari_enabled() from the PCI core instead of the identical local copy bnx2x_ari_enabled(). No functional change intended. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jesper Dangaard Brouer says: ==================== Improve xdp_monitor samples/bpf Here are some improvements to the xdp_monitor tool currently located under samples/bpf/. Once the tools library libbpf become more feature complete, xdp_monitor should be converted to use it, and be moved into tools/bpf/xdp/ or tools/xdp/. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
Other concurrent running programs, like perf or the XDP program what needed to be monitored, might take up part of the max locked memory limit. Thus, the xdp_monitor tool have to set the RLIMIT_MEMLOCK to RLIM_INFINITY, as it cannot determine a more sane limit. Using the man exit(3) specified EXIT_FAILURE return exit code, and correct other users too. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
Also monitor the tracepoint xdp_exception. This tracepoint is usually invoked by the drivers. Programs themselves can activate this by returning XDP_ABORTED, which will drop the packet but also trigger the tracepoint. This is useful for distinguishing intentional (XDP_DROP) vs. ebpf-program error cases that cased a drop (XDP_ABORTED). Drivers also use this tracepoint for reporting on XDP actions that are unknown to the specific driver. This can help the user to detect if a driver e.g. doesn't implement XDP_REDIRECT yet. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
The first 8 bytes of the tracepoint context struct are not accessible by the bpf code. This is a choice that dates back to the original inclusion of this code. See explaination in: commit 98b5c2c6 ("perf, bpf: allow bpf programs attach to tracepoints") Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Simon Horman says: ==================== nfp: extend match and action for flower offload Pieter says: This series extends flower offload match and action capabilities. It specifically adds offload capabilities for matching on MPLS, TTL, TOS and flow label. Furthermore offload capabilities for action have been expanded to include set ethernet, ipv4, ipv6, tcp and udp headers. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Previously we did not have offloading support for set TCP/UDP actions. This patch enables TC flower offload of set TCP/UDP sport and dport actions. Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Previously we did not have offloading support for set IPv6 actions. This patch enables TC flower offload of set IPv6 src and dst address actions. Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Previously we did not have offloading support for set IPv4 actions. This patch enables TC flower offload of set IPv4 src and dst address actions. Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Previously we did not have offloading support for set ethernet actions. This patch enables TC flower offload of set ethernet actions. Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Previously matching on IPv6 ttl and tos fields were not offloaded. This patch enables offloading IPv6 ttl and tos as match fields. Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Previously matching on IPv4 ttl and tos fields were not offloaded. This patch enables offloading IPv4 ttl and tos as match fields. Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Previously MPLS match offloading was not supported. This patch enables MPLS match offloading support for label, bos and tc fields. Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
commit cc71b7b0 ("net/ipv6: remove unused err variable on icmpv6_push_pending_frames") exposed icmpv6_push_pending_frames return value not being used. Remove now unnecessary int err declarations and uses. Miscellanea: o Remove unnecessary goto and out: labels o Realign arguments Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 10月, 2017 20 次提交
-
-
由 Jacob Keller 提交于
Now that we've reduced the number of flags, organize similar flags together and re-number them accordingly. Since we don't yet have more than 32 flags, we'll use a u32 for both the hw_features and flag field. Should we gain more flags in the future, we may need to convert to a u64 or separate flags out into two fields. One alternative approach considered, but not implemented here, was to use an enumeration for the flag variables, and create a macro I40E_FLAG() which used string concatenation to generate BIT_ULL values. This has the advantage of making the actual bit values compile-time dynamic so that we do not need to worry about matching the order to the bit value. However, this does produce a high level of code churn, and makes it more difficult to read a dumped flags value when debugging. Change-ID: I8653fff69453cd547d6fe98d29dfa9d8710387d1 Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Reviewed-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
Since commit 6a7fded7 ("i40e: Fix RS bit update in Tx path and disable force WB workaround") we've tried to "optimize" setting the RS bit based around skb->xmit_more. This same logic was refactored in commit 1dc8b538 ("i40e: Reorder logic for coalescing RS bits"), but ultimately was not functionally changed. Using skb->xmit_more in this way is incorrect, because in certain circumstances we may see a large number of skbs in sequence with xmit_more set. This leads to a performance loss as the hardware does not writeback anything for those packets, which delays the time it takes for us to respond to the stack transmit requests. This significantly impacts UDP performance, especially when layered with multiple devices, such as bonding, VLANs, and vnet setups. This was not noticed until now because it is difficult to create a setup which reproduces the issue. It was discovered in a UDP_STREAM test in a VM, connected using a vnet device to a bridge, which is connected to a bonded pair of X710 ports in active-backup mode with a VLAN. These layered devices seem to compound the number of skbs transmitted at once by the qdisc. Additionally, the problem can be masked by reducing the ITR value. Since the original commit does not provide strong justification for this RS bit "optimization", revert to the previous behavior of setting the RS bit every 4th packet. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
A recent commit 809481484e5d ("i40e/i40evf: support for VF VLAN tag stripping control") added support for VFs to negotiate the control of VLAN tag stripping. This should have allowed VFs to disable the feature. Unfortunately, the flag was set only in netdev->feature flags and not in netdev->hw_features. This ultimately causes the stack to assume that it cannot change the flag, so it was unchangeable and marked as [fixed] in the ethtool -k output. Fix this by setting the feature in hw_features first, just as we do for the PF code. This enables ethtool -K to disable the feature correctly, and fully enables user control of the VLAN tag stripping feature. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mariusz Stachura 提交于
Previous implementation of LED set/get functions required to enter PHY debug mode, in order to prevent access to it from FW and SW at the same time. Reset of all ports was a unwanted side effect. Signed-off-by: NMariusz Stachura <mariusz.stachura@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alan Brady 提交于
This patch implements the PCI error handler reset_prepare and reset_done. This allows us to handle function level reset. Without this patch we are unable to perform and recover from an FLR correctly and this will cause VFs to be unable to recover from an FLR on the PF. Signed-off-by: NAlan Brady <alan.brady@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Filip Sadowski 提交于
When there is no space for more flow director filters and user requested to add a new one it is rejected by firmware and automatically removed from the filter list maintained by driver. This behaviour is correct. Afterwards existing filter can be removed making free slot for the new one. This however causes the newly added filter to be accepted by firmware but removed from driver filter list resulting in not showing after issuing 'ethtool -n <dev_name>'. This happened due to not clearing the variable pf->fd_inv which stores filter number to be removed from the list when firmware refused to add the requested filter. It caused the filter with this specific ID to be constantly removed once it was added to the list although it has been accepted by firmware and effectively applied to the NIC. It was fixed by clearing pf->fd_inv variable after removal of the filter from the list when it was rejected by firmware. Signed-off-by: NFilip Sadowski <filip.sadowski@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Filip Sadowski 提交于
This patch causes error message to be displayed when NIC detects insertion of module that does not meet thermal requirements. Signed-off-by: NFilip Sadowski <filip.sadowski@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alice Michael 提交于
This patch removes some code that was accidentally added to the wrong function with a merge error. Fixes: c53934c6 ("i40e: fix: do not sleep in netdev_ops") Signed-off-by: NAlice Michael <alice.michael@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
When using set_bit and friends, we should be using actual bitmaps, and fix all the locations where we might access it. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
This register was defined incorrectly. Fix the increment value to 8, and replace the iterator with _i to make the definition consistent with other statistics registers. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Since I40E_PHY_TYPE_MAX is used as an iterator, usually combined with some sort of bit-shifting, it should only include actual PHY types and not error cases. Move it up in the enum declaration so that loops only iterate across valid PHY types. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alan Brady 提交于
Starting with XL710 FW 5.3 PTP L4 was disabled for XL710 due to a bug. The bug has since been resolved in XL710 FW >6.0 and PTP L4 can now be re-enabled on those devices with updated firmware. Signed-off-by: NAlan Brady <alan.brady@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
Currently, when setting up the IRQ for a q_vector, we set an affinity hint based on the v_idx of that q_vector. Meaning a loop iterates on v_idx, which is an incremental value, and the cpumask is created based on this value. This is a problem in systems with multiple logical CPUs per core (like in simultaneous multithreading (SMT) scenarios). If we disable some logical CPUs, by turning SMT off for example, we will end up with a sparse cpu_online_mask, i.e., only the first CPU in a core is online, and incremental filling in q_vector cpumask might lead to multiple offline CPUs being assigned to q_vectors. Example: if we have a system with 8 cores each one containing 8 logical CPUs (SMT == 8 in this case), we have 64 CPUs in total. But if SMT is disabled, only the 1st CPU in each core remains online, so the cpu_online_mask in this case would have only 8 bits set, in a sparse way. In general case, when SMT is off the cpu_online_mask has only C bits set: 0, 1*N, 2*N, ..., C*(N-1) where C == # of cores; N == # of logical CPUs per core. In our example, only bits 0, 8, 16, 24, 32, 40, 48, 56 would be set. Instead, we should only assign hints for CPUs which are online. Even better, the kernel already provides a function, cpumask_local_spread() which takes an index and returns a CPU, spreading the interrupts across local NUMA nodes first, and then remote ones if necessary. Since we generally have a 1:1 mapping between vectors and CPUs, there is no real advantage to spreading vectors to local CPUs first. In order to avoid mismatch of the default XPS hints, we'll pass -1 so that it spreads across all CPUs without regard to the node locality. Note that we don't need to change the q_vector->affinity_mask as this is initialized to cpu_possible_mask, until an actual affinity is set and then notified back to us. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
By default, our devices do source pruning, that is, they drop receive packets that have the source MAC matching one of the receive filters. Unfortunately, this breaks ARP monitoring in channel bonding, as the bonding driver expects devices to receive ARPs containing their own source address. Add an ethtool private flag to control this feature. Also, remove the netif_running() check when we process our private flags. It's OK to reset when the device is closed and in most cases we need the reset the apply these changes. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Rami Rosen 提交于
This patch fixes a typo in i40e_pf object documentation; num_req_vfs refers to the number of VFs requested for the PF. Signed-off-by: NRami Rosen <rami.rosen@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Tim Hansen 提交于
int err is unused by icmpv6_push_pending_frames(), this patch returns removes the variable and returns the function with 0. git bisect shows this variable has been around since linux has been in git in commit 1da177e4. This was found by running make coccicheck M=net/ipv6/ on linus' tree on commit 77ede3a0 (current HEAD as of this patch). Signed-off-by: NTim Hansen <devtimhansen@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lin Zhang 提交于
Storing the left length of skb into 'len' actually has no effect so we can remove it. Signed-off-by: NLin Zhang <xiaolou4617@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Craig Gallek says: ==================== libbpf: support more map options The functional change to this series is the ability to use flags when creating maps from object files loaded by libbpf. In order to do this, the first patch updates the library to handle map definitions that differ in size from libbpf's struct bpf_map_def. For object files with a larger map definition, libbpf will continue to load if the unknown fields are all zero, otherwise the map is rejected. If the map definition in the object file is smaller than expected, libbpf will use zero as a default value in the missing fields. ==================== Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Craig Gallek 提交于
This is required to use BPF_MAP_TYPE_LPM_TRIE or any other map type which requires flags. Signed-off-by: NCraig Gallek <kraig@google.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Craig Gallek 提交于
This library previously assumed a fixed-size map options structure. Any new options were ignored. In order to allow the options structure to grow and to support parsing older programs, this patch updates the maps section parsing to handle varying sizes. Object files with maps sections smaller than expected will have the new fields initialized to zero. Object files which have larger than expected maps sections will be rejected unless all of the unrecognized data is zero. This change still assumes that each map definition in the maps section is the same size. Signed-off-by: NCraig Gallek <kraig@google.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-