- 15 3月, 2014 8 次提交
-
-
由 Amitkumar Karwar 提交于
Existing mwifiex_11n_dispatch_pkt() function is renamed as mwifiex_11n_dispatch_pkt_until_start_win() and a new function mwifiex_11n_dispatch_pkt() is created for a common code which dispatches single packet based on interface type. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Use negative check for 'status' and return from the function. This improves readability by avoiding line splits. Also, local variable is used for start window calculations. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
As V15 firmware supports VHT rate configuration, we can use this information received in set bitrate mask handler. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
During Tx rate configuration, newer firmware V15 expects bitmap for VHT MCS rates as well. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
The firmware API version number will be used for future patches to support different firmware API specs. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Alexey Khoroshilov 提交于
If p54u_load_firmware() fails, p54u_probe() does not deallocate already allocated resources. The patch adds proper failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
-
- 14 3月, 2014 4 次提交
-
-
由 Larry Finger 提交于
Commit a619d1ab leads to the following static checker warning: drivers/net/wireless/rtlwifi/rtl8723be/phy.c:667 _rtl8723be_store_tx_power_by_rate() error: buffer overflow 'rtlphy->tx_power_by_rate_offset[band]' 4 <= 5 This warning arises because the code is testing the indices for the wrong maximum values. In addition, the tests merely putput a warning, and then procedes to corrupt memory. With this change, any such invalid memory access is avoided. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Commit 3ebe8e25 ("ieee80211: remove function ieee80211_{dsss_chan_to_freq, freq_to_dsss_chan}") removed ieee80211_dsss_chan_to_freq, but it neglected to account for this staging driver... Cc: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Commit d8ca16db ("mac80211: add length check in ieee80211_is_robust_mgmt_frame()") changed that API to take an skb, and added "_ieee80211_is_robust_mgmt_frame" as a direct replacement for the older API. This is the same fix that was applied to the other rtlwifi drivers in that commit. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
This reverts commit 161d7855. Reversal of fortune -- I thought this was going to be resolved by other means, but that hasn't materialized. Plus, apparently we now care more than I realized about not breaking staging drivers... Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 3月, 2014 1 次提交
-
-
由 Emmanuel Grumbach 提交于
There is a flow in which we send the host command in SYNC mode, but we don't take priv->mutex. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1046495 Cc: <stable@vger.kernel.org> Reviewed-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 07 3月, 2014 16 次提交
-
-
由 Marek Puzyniak 提交于
Seems like we have an old bug, where we incidently overwrites the max_antenna_gain we pass to firmware, with zero value. End of all we are artifically reducing the output power. This patch removes the excessive assignment on max_antenna_gain, which is being provided by regulatory domain, and consequently improves the tx power. Signed-off-by: NMarek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: NBartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Ben Greear 提交于
Consolidate the list of msdu skbs into the msdu-head skb, delete the rest of the skbs, pass the msdu-head skb on up the stack as normal. Tested with high-speed TCP and UDP traffic on modified firmware that supports raw-rx. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Yogesh Ashok Powar 提交于
It fixes following sparse check warning >#make C=1 CF=-D__CHECK_ENDIAN__ drivers/net/wireless/mwl8k.o >drivers/net/wireless/mwl8k.c:3089:6: warning: symbol 'mwl8k_update_survey' was not declared. Should it be static? Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NNishant Sarmukadam <nishants@marvell.com> Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
It fixes couple of sparse check >#make C=1 CF=-D__CHECK_ENDIAN__ drivers/net/wireless/mwl8k.o >drivers/net/wireless/mwl8k.c:3104:19: warning: cast to restricted __le32 >drivers/net/wireless/mwl8k.c:3108:18: warning: cast to restricted __le32 Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NNishant Sarmukadam <nishants@marvell.com> Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hante Meuleman 提交于
The intstatus in sdio code can be updated from different threads. To protect intstatus access, atomic functions are used. One of them is set_bit, but this function is not guaranteed atomic on all platforms. The loop was replaced with local created OR function. Reviewed-by: NArend Van Spriel <arend@broadcom.com> Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NDaniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: NHante Meuleman <meuleman@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Arend van Spriel 提交于
This reverts commit c98db0be. The function atomic_set_mask() is not architecture independent so it can not be used in the driver as is. Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Smatch reports the following: drivers/net/wireless/rtlwifi/rtl8723be/fw.c:208 _rtl8723be_fill_h2c_command() warn: variable dereferenced before check 'rtlhal' (see line 69) drivers/net/wireless/rtlwifi/rtl8723be/hw.c:1732 _rtl8723be_read_adapter_info() error: __builtin_memcpy() '&rtlefuse->efuse_map[0][0]' too small (256 vs 512) The first one is fixed by removing two pointless tests for NULL pointers. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Sparse reports the following: drivers/net/wireless/rtlwifi/rtl8723be/sw.c:374:14: sparse: duplicate const drivers/net/wireless/rtlwifi/rtl8723be/hw.c:2214:30: sparse: cast to restricted __le32 Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch prevents log spamming by adding a case for a previously unhandled case. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In commit f78bccd7 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8723ae. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In commit f78bccd7 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8188ee. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In commit f78bccd7 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8192se. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In commit f78bccd7 entitled "rtlwifi: rtl8192ce: Fix too long disable of IRQs", Olivier Langlois <olivier@trillion01.com> fixed a problem caused by an extra long disabling of interrupts. This patch makes the same fix for rtl8192cu. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In a previous commit, Peter Wu removed this call as configure_filter takes care of setting/clearing RCR_AAP. This patch makes the same change for rtl8723be. In addition, a change is made in the logging level for one debug printout. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
rtlwifi: rtl8192ce: rtl8192cu: rtl8192de: rtl8192se: rtl8723ae: rtl8723be: rtl8188eu: Modify for new API The addition of a driver for the RTL8821AE requires a new API for the fill_tx_desc() and set_desc() callback routines. This commit makes the appropriate modifications in all the other drivers. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 3月, 2014 11 次提交
-
-
由 Stanislaw Gruszka 提交于
iwlegacy version of this iwlwifi patch: commit aed7d9ac Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Wed Feb 20 11:33:00 2013 +0200 iwlwifi: disable 8K A-MSDU by default Supporting 8K A-MSDU means that we need to allocate order 1 pages for every Rx packet. Even when there is no traffic. This adds stress on the memory manager. The handling of compound pages is also less trivial for the memory manager and not using them will make the allocation code run faster although I didn't really measure. Eric also pointed out that having huge buffers with little data in them is not very nice towards the TCP stack since the truesize of the skb is huge. This doesn't allow TCP to have a big Rx window. See https://patchwork.kernel.org/patch/2167711/ for details. Note that very few vendors will actually send A-MSDU. Disable this feature by default. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Surendra Patil 提交于
Sparse warns about invalid assignment in drivers/net/wireless/ti/wl1251/cmd.c:451:42: warning: invalid assignment: |= drivers/net/wireless/ti/wl1251/cmd.c:451:42: left side has type restricted __le16 drivers/net/wireless/ti/wl1251/cmd.c:451:42: right side has type int Hence type converted right side to __le16. Signed-off-by: NSurendra Patil <surendra.tux@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The drivers for RTL8723AE and RTL8723BE have some code in common. This commit copies the common power management routines into the shared code. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The drivers for RTL8723AE and RTL8723BE have some code in common. This commit copies the common firmware routines into the shared code. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The drivers for RTL8723AE and RTL8723BE have some code in common. This commit creates a driver for this code that will be shared, and copies those common routines from rtl8723ae's phy code. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
A driver for the RTL8723BE will soon be added. This patch adds the necessary parts to the common headers, and modifies the existing drivers for those changes. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
A new driver in the rtlwifi family for the RTL8723BE will soon be added. The bluetooth coexistence code for this device has been split into a separate mini driver as it will be shared with other devices. This commit adds the the headers and sources, and modifies Kconfig and Makefile to configure and build this driver. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 andrea merello 提交于
The TX descriptors are consumed by the HW using DMA. Even if in the driver code the TX descriptor writes appears before the HW "dma kick" register writes, the CPU may reorder them. If this happens, the TX may not happen at all becase the "valid" descriptor flag may have not been set yet. This patch adds a write memory barrier to ensures the TX descriptor is written before writing to the HW "dma kick" register. Signed-off-by: NAndrea Merello <andrea.merello@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 andrea merello 提交于
The TX descriptors are consumed by the HW using DMA. Even if in the driver code the memory write that sets the "valid" flag appears after all other writes, the CPU may reorder writes, causing the HW to consider as valid a not-fully-written yet descriptor. This may cause HW incorrect behaviour. This can happen because (AFAIK) the HW may attempt DMA asynchronously without waiting to be kicked by the following register write. This patch adds a write memory barrier to enforce writes ordering. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAndrea Merello <andrea.merello@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 John W. Linville 提交于
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c
-