This reverts commit 1c425915.

S/G display is not stable with the IOMMU enabled on some
platforms.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205523Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are still combinations of sbios and firmware that
are not stable.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204689Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

5.4 and newer works fine with navi14.
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When gfxoff is enabled, accessing gfx registers via MMIO
can lead to a hang.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497Acked-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So that the setting reflects what the hw supports. This will
be used in a subsequent patch so needs to be correct.

v2: squash in fix from Colin Ian King

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address.  This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).

Instead, use the DMA address of the dummy page because it will always
be safe.

Fixes: 27ae1064 ("drm/amdgpu: add interupt handler implementation for si v3")
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address.  This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).

Instead, use the DMA address of the dummy page because it will always
be safe.

Fixes: d8f60cfc ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
Fixes: 25a857fb ("drm/radeon/kms: add support for interrupts on SI")
Fixes: a59781bb ("drm/radeon: add support for interrupts on CIK (v5)")
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Previous patch allowed to initialize debugfs entries on both MST
and SST connectors, but MST connectors get registered much later
which exposed an issue of debugfs entries being initialized in the
same folder.

[how]
Return SST debugfs entries' initialization back to where it was.
For MST connectors we should initialize debugfs entries in connector
register function after the connector is registered.
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed as a fallback if the vbios can't be fetched by other means.
Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is one regression from 042f3d7b745cd76aa
To put flush_delayed_work after adev->shutdown = true
which will make amdgpu_ih_process not response the irq
At last, all ib ring tests will be failed just like below

[drm] amdgpu: finishing device.
[drm] Fence fallback timer expired on ring gfx
[drm] Fence fallback timer expired on ring comp_1.0.0
[drm] Fence fallback timer expired on ring comp_1.1.0
[drm] Fence fallback timer expired on ring comp_1.2.0
[drm] Fence fallback timer expired on ring comp_1.3.0
[drm] Fence fallback timer expired on ring comp_1.0.1
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.1.1 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.2.1 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.3.1 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on sdma0 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on sdma1 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on uvd_enc_0.0 (-110).
amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vce0 (-110).
[drm:amdgpu_device_delayed_init_work_handler [amdgpu]] *ERROR* ib ring test failed (-110).

v2: replace cancel_delayed_work_sync() with flush_delayed_work()
Signed-off-by: NYintian Tao <yttao@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For fine grained dpm, there is only two levels supported. However
to reflect correctly the current clock frequency, there is an
intermediate level faked. Thus on forcing level setting, we
need to treat level 2 correctly as level 1.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise, the error message prompted will confuse user.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

RunBTC is added for Navi ASIC on hardware setup.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise, without RLC reinitialization, the DPM reenablement
will fail. That affects the custom pptable uploading.

V2: setting/clearing uploading_custom_pp_table in
    smu_sys_set_pp_table()
Reported-by: NMatt Coffin <mcoffin13@gmail.com>
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Tested-by: NMatt Coffin <mcoffin13@gmail.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. no need to allocate an extra member for 'mqd_backup' array
2. backup/restore mqd to/from the correct 'mqd_backup' array slot

v2: warning fix (Alex)
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-misc-next-fixes-2019-11-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

- Fix ttm bo refcnt when using the new gem obj mmap hook (Thomas)

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120204946.GA120328@art_vandelay

Merge tag 'drm-intel-next-fixes-2019-11-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Includes gvt-next-fixes-2019-11-12
- Fix Bugzilla #112051: Fix detection for a CMP-V PCH
- Fix Bugzilla #112256: Corrupted page table at address on plymouth splash
- Fix Bugzilla #111594: Avoid losing RC6 when HuC authentication is used
- Fix for OA/perf metric coherency, restore GT coarse power gating workaround
- Avoid atomic context on error capture
- Avoid MST bitmask overflowing to EDP/DPI input select
- Fixes to CI found dmesg splats
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120204035.GA14908@jlahtine-desk.ger.corp.intel.com

drm-next-5.5-2019-11-15:

amdgpu:
- Fix AVFS handling on SMU7 parts with custom power tables
- Enable Overdrive sysfs interface for Navi parts
- Fix power limit handling on smu11 parts
- Fix pcie link sysfs output for Navi
- Probably cancel MM worker threads on shutdown

radeon:
- Cleanup for ppc change
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115163516.3714-1-alexander.deucher@amd.com

Merge tag 'gvt-next-fixes-2019-11-12' of https://github.com/intel/gvt-linux into drm-intel-next-fixes

gvt-next-fixes-2019-11-12

- Remove PVINFO read for initial state (Tina)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112062032.GO4196@zhen-hp.sh.intel.com

As we want to be able to run inside atomic context for retiring the
i915_active, and we are no longer allowed to abuse mutex_trylock, split
the tree management portion of i915_active.mutex into an irq-safe
spinlock.

References: a0855d24 ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
References: https://bugs.freedesktop.org/show_bug.cgi?id=111626
Fixes: 274cbf20 ("drm/i915: Push the i915_active.retire into a worker")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114172535.1116-1-chris@chris-wilson.co.uk
(cherry picked from commit c9ad602f)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

It's supposed to be just a const pointer.

Fixes: 074c77e3 ("drm/i915/tgl: Gen-12 display loses Yf tiling and legacy CCS support")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115120440.17883-1-jani.nikula@intel.com
(cherry picked from commit 48ea97fa)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

On some platforms (e.g. KBL) that do not support GuC submission, but
the user enabled the GuC communication (e.g for HuC authentication)
calling the GuC EXIT_S_STATE action results in lose of ability to
enter RC6. We can remove the GuC suspend/resume entirely as we do
not need to save the GuC submission status.

Add intel_guc_submission_is_enabled() function to determine if
GuC submission is active.

v2: Do not suspend/resume the GuC on platforms that do not support
    Guc Submission.
v3: Fix typo, move suspend logic to remove goto.
v4: Use intel_guc_submission_is_enabled() to check GuC submission
    status.
v5: No need to look at engine to determine if submission is enabled.
    Squash fix + intel_guc_submission_is_enabled() patch into one.
v6: Move resume check into intel_guc_resume() for symmetry.
    Fix commit Fixes tag.
Reported-by: NKiteStramuort <kitestramuort@autistici.org>
Reported-by: NS. Zharkoff <s.zharkoff@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623
Fixes: ffd5ce22 ("drm/i915/guc: Updates for GuC 32.0.3 firmware")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: NTomas Janousek <tomi@nomi.cz>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
(cherry picked from commit 82e0c5bb)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Our callers fall into two categories, those passing timeout=0 who just
want to flush request retirements and those passing a timeout that need
to wait for submission completion (e.g. intel_gt_wait_for_idle()).
Currently, we only wait for a snapshot of timelines at the start of the
wait (but there was an expectation that new requests would cause timelines
to appear at the end). However, our callers, such as
intel_gt_wait_for_idle() before suspend, do require us to wait for the
power management requests emitted by retirement as well. If we don't,
then it takes an extra second or two for the background worker to flush
the queue and mark the GT as idle.

Fixes: 7e805762 ("drm/i915: Drop struct_mutex from around i915_retire_requests()")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114225736.616885-1-chris@chris-wilson.co.uk
(cherry picked from commit 7936a22d)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

The workaround to disable coarse power gating is still needed on SKL
GT3/GT4 machines and since the RC6 context corruption was discovered by
the hardware team also on all GEN9 machines. Restore applying the
workaround.

Fixes: c1132367 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/intel_gt_pm_late_selftests/live_rc6_ctx
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114152621.7235-1-imre.deak@intel.com
(cherry picked from commit 980f87a2)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

fbdev uses the physical address of our framebuffer for its fb_mmap()
routine. While we need to adapt this address for the new io BAR, we have
to fix v5.4 first! The simplest fix is to restore the smem back to v5.3
and we will then probably have to implement our fbops->fb_mmap() callback
to handle local memory.
Reported-by: NNeil MacLeod <freedesktop@nmacleod.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256
Fixes: 5f889b9a ("drm/i915: Disregard drm_mode_config.fb_base")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: NNeil MacLeod <freedesktop@nmacleod.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk
(cherry picked from commit abc55207)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

I'm observing incoherence metric values, changing from run to run.

It appears the patches introducing noa wait & reconfiguration from
command stream switched places in the series multiple times during the
review. This lead to the dependency of one onto the order to go
missing...
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 15d0ace1 ("drm/i915/perf: execute OA configuration from command stream")
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113154639.27144-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 93937659)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

io_mapping_map_atomic/kmap_atomic are occasionally taken in error capture
(if there is no aperture preallocated for the use of error capture), but
the error capture and compression routines are now run in normal
context:

<3> [113.316247] BUG: sleeping function called from invalid context at mm/page_alloc.c:4653
<3> [113.318190] in_atomic(): 1, irqs_disabled(): 0, pid: 678, name: debugfs_test
<4> [113.319900] no locks held by debugfs_test/678.
<3> [113.321002] Preemption disabled at:
<4> [113.321130] [<ffffffffa02506d4>] i915_error_object_create+0x494/0x610 [i915]
<4> [113.327259] Call Trace:
<4> [113.327871] dump_stack+0x67/0x9b
<4> [113.328683] ___might_sleep+0x167/0x250
<4> [113.329618] __alloc_pages_nodemask+0x26b/0x1110
<4> [113.334614] pool_alloc.constprop.19+0x14/0x60 [i915]
<4> [113.335951] compress_page+0x7c/0x100 [i915]
<4> [113.337110] i915_error_object_create+0x4bd/0x610 [i915]
<4> [113.338515] i915_capture_gpu_state+0x384/0x1680 [i915]

However, it is not a good idea to run the slow compression inside atomic
context, so we choose not to.

Fixes: 895d8ebe ("drm/i915: error capture with no ggtt slot")
Signed-off-by: NBruce Chang <yu.bruce.chang@intel.com>
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113231104.24208-1-yu.bruce.chang@intel.com
(cherry picked from commit 48715f70)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

TRANS_DDI_MST_TRANSPORT_SELECT is 2 bits wide not 3, it was taking
one bit from EDP/DSI Input Select.

Fixes: b3545e08 ("drm/i915/tgl: add support to one DP-MST stream")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107214559.77087-1-jose.souza@intel.com
(cherry picked from commit bb747fa5)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

According to internal documents I found for CMP PCHs the PCI ID 0xA3C1
belongs to a CMP-V chipset. Based on the same docs the programming of
the PCH is compatible with that of KBP. Fix up my previous wrong
assumption accordingly using the SPT programming which in turn is the
basis for KBP.

The original bug reporter verified that this is the correct PCH
identification (the only way we'll program valid DDC pin-pair values to
the GMBUS register) and the Windows team uses the same identification
(that is using the KBP programming model for this PCH).

I filed the necessary Bspec update requests (BSpec/33734).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112051
Fixes: 37c92dc3 ("drm/i915: Add new CNL PCH ID seen on a CML platform")
Reported-and-tested-by: NCyrus <cyrus.lien@canonical.com>
Cc: Cyrus <cyrus.lien@canonical.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112104608.24587-1-imre.deak@intel.com
(cherry picked from commit 50a5065f)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Throw in a flush_work() to specifically flush the context cleanup work
before the module is unloaded.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112248
Fixes: a4e7ccda ("drm/i915: Move context management under GEM")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112150051.1603-1-chris@chris-wilson.co.uk
(cherry picked from commit 5f00cac9)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

When mapping ttm objects via drm_gem_ttm_mmap() helper
drm_gem_mmap_obj() will take an object reference.  That gets
never released due to ttm having its own reference counting.

Fix that by dropping the gem object reference once the ttm mmap
completed (and ttm refcount got bumped).

For that to work properly the drm_gem_object_get() call in
drm_gem_ttm_mmap() must be moved so it happens before calling
obj->funcs->mmap(), otherwise the gem refcount would go down
to zero.

Fixes: 231927d9 ("drm/ttm: add drm_gem_ttm_mmap()")
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20191113135612.19679-1-kraxel@redhat.com

Two minor cleanups / fixes for -next.
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: =?UTF-8?q?Thomas=20Hellstr=C3=B6m=20=28VMware=29?=
Link: https://patchwork.freedesktop.org/patch/msgid/20191114131703.8607-1-thomas_os@shipmail.org

Merge tag 'drm-intel-next-fixes-2019-11-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- PMU "Frequency" is reported as accumulated cycles
- Avoid OOPS in dumb_create IOCTL when no CRTCs
- Mitigation for userptr put_pages deadlock with trylock_page
- Fix to avoid freeing heartbeat request too early
- Fix LRC coherency issue
- Fix Bugzilla #112212: Avoid screen corruption on MST
- Error path fix to unlock context on failed context VM SETPARAM
- Always consider holding preemption a privileged op in perf/OA
- Preload LUTs if the hw isn't currently using them to avoid color flash on VLV/CHV
- Protect context while grabbing its name for the request
- Don't resize aliasing ppGTT size
- Smaller fixes picked by tooling
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114085213.GA6440@jlahtine-desk.ger.corp.intel.com

drivers/gpu/drm/vmwgfx/vmwgfx_surface.c:339:22:
 warning: variable srf set but not used [-Wunused-but-set-variable]

'srf' is never used, so can be removed.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

Drivers like vmwgfx may want to test whether the dma page pool is present
or not. Since it's activated by default by TTM if compiled-in, define a
hidden configuration option that the driver can test for.

Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

This backmerges the branch that ended up in Linus' tree. It removes
all the changes for the rc6 patches from Linus' tree in favour of
a patch that is based on a large refactor that occured.

Otherwise it all looks good.
Signed-off-by: NDave Airlie <airlied@redhat.com>

In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.

v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
  sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
  change.
v5:
- Rebased on latest upstream gt_pm refactoring.
v6:
- s/i915_rc6_/intel_rc6_/
- Don't return a value from i915_rc6_ctx_wa_check().
v7:
- Rebased on latest gt rc6 refactoring.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
[airlied: pull this later version of this patch into drm-next
to make resolving the conflict mess easier.]
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is a pretty simple improvement that allows to find encoder
as the one and only (ARC PGU doesn't support more than one) endpoint
instead of using non-standard "encoder-slave" property.
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CY4PR1201MB0120FDB10A777345F9C27720A1C90@CY4PR1201MB0120.namprd12.prod.outlook.com

Merge tag 'drm-misc-next-fixes-2019-11-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

- Fix memory leak in gpu debugfs node's release (Johan)

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113211056.GA78440@art_vandelay