- 24 10月, 2010 40 次提交
-
-
由 Alexander Graf 提交于
The DAR register contains the address a data page fault occured at. This register behaves pretty much like a simple data storage register that gets written to on data faults. There is no hypervisor interaction required on read or write. This patch converts all users of the current field to the shared page. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Alexander Graf 提交于
The DSISR register contains information about a data page fault. It is fully read/write from inside the guest context and we don't need to worry about interacting based on writes of this register. This patch converts all users of the current field to the shared page. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Alexander Graf 提交于
One of the most obvious registers to share with the guest directly is the MSR. The MSR contains the "interrupts enabled" flag which the guest has to toggle in critical sections. So in order to bring the overhead of interrupt en- and disabling down, let's put msr into the shared page. Keep in mind that even though you can fully read its contents, writing to it doesn't always update all state. There are a few safe fields that don't require hypervisor interaction. See the documentation for a list of MSR bits that are safe to be set from inside the guest. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Alexander Graf 提交于
For transparent variable sharing between the hypervisor and guest, I introduce a shared page. This shared page will contain all the registers the guest can read and write safely without exiting guest context. This patch only implements the stubs required for the basic structure of the shared page. The actual register moving follows. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Mohammed Gamal 提交于
If a nop instruction is encountered, we jump directly to the done label. This skip updating rip. Break from the switch case instead Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Since modrm operand can be either register or memory, decoding it into a 'struct operand', which can represent both, is simpler. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Instead of using modrm_ea, which will soon be gone. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
The NoAccess flag will prevent memory from being accessed. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Use for INVLPG, which accesses the tlb, not memory. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
This is an ordinary modrm source or destination; use the standard structure representing it. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
This is an ordinary modrm source or destination; use the standard structure representing it. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
The operands for these instructions are 32 bits or 64 bits, depending on long mode, and ignoring REX prefixes, or the operand size prefix. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
(x && (x & y)) == (x & y) Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Unused (and has never been). Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
The code is repeated three times, put it into fetch_register_operand() Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Use X8() to avoid repetition. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Currently we use a void pointer for memory addresses. That's wrong since these are guest virtual addresses which are not directly dereferencable by the host. Use the correct type, unsigned long. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Let it compute modrm_seg instead, and have the caller apply it. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch lets a nested vmrun fail if the L1 hypervisor left the asid zero. This fixes the asid_zero unit test. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch lets the nested vmrun fail if the L1 hypervisor has not intercepted vmrun. This fixes the "vmrun intercept check" unit test. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Mark page dirty only when this page is really written, it's more exacter, and also can fix dirty page marking in speculation path Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Introduce spte_has_volatile_bits() function to judge whether spte bits will miss, it's more readable and can help us to cleanup code later Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
It's a small cleanup that using using kvm_set_pfn_accessed() instead of mark_page_accessed() Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Do not recheck io permission on every iteration. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
LMSW is documented not to be able to clear cr0.pe; make it so. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
No need to update vcpu state since instruction is in the middle of the emulation. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Needed for repeating instructions with execution functions. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
So they can reference execution functions. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
No code changes. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Instead of looking up the opcode twice (once for decode flags, once for the big execution switch) look up both flags and function in the decode tables. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
It doesn't ever change, so we don't need to pass it around everywhere. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Now that the group index no longer exists, the space is free. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-