Hook the MPIC code up to the KVM interfaces, add locking, etc.
Signed-off-by: NScott Wood <scottwood@freescale.com>
[agraf: add stub function for kvmppc_mpic_set_epr, non-booke, 64bit]
Signed-off-by: NAlexander Graf <agraf@suse.de>

Remove braces that Linux style doesn't permit, remove space after
'*' that Lindent added, keep error/debug strings contiguous, etc.

Substitute type names, debug prints, etc.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Remove some parts of the code that are obviously QEMU or Raven specific
before fixing style issues, to reduce the style issues that need to be
fixed.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This is QEMU's hw/openpic.c from commit
abd8d4a4d6dfea7ddea72f095f993e1de941614e ("Update version for
1.4.0-rc0"), run through Lindent with no other changes to ease merging
future changes between Linux and QEMU.  Remaining style issues
(including those introduced by Lindent) will be fixed in a later patch.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

At present, the KVM_GET_DIRTY_LOG ioctl doesn't report modifications
done by the host to the virtual processor areas (VPAs) and dispatch
trace logs (DTLs) registered by the guest.  This is because those
modifications are done either in real mode or in the host kernel
context, and in neither case does the access go through the guest's
HPT, and thus no change (C) bit gets set in the guest's HPT.

However, the changes done by the host do need to be tracked so that
the modified pages get transferred when doing live migration.  In
order to track these modifications, this adds a dirty flag to the
struct representing the VPA/DTL areas, and arranges to set the flag
when the VPA/DTL gets modified by the host.  Then, when we are
collecting the dirty log, we also check the dirty flags for the
VPA and DTL for each vcpu and set the relevant bit in the dirty log
if necessary.  Doing this also means we now need to keep track of
the guest physical address of the VPA/DTL areas.

So as not to lose track of modifications to a VPA/DTL area when it gets
unregistered, or when a new area gets registered in its place, we need
to transfer the dirty state to the rmap chain.  This adds code to
kvmppc_unpin_guest_page() to do that if the area was dirty.  To simplify
that code, we now require that all VPA, DTL and SLB shadow buffer areas
fit within a single host page.  Guests already comply with this
requirement because pHyp requires that these areas not cross a 4k
boundary.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

At present, the code that determines whether a HPT entry has changed,
and thus needs to be sent to userspace when it is copying the HPT,
doesn't consider a hardware update to the reference and change bits
(R and C) in the HPT entries to constitute a change that needs to
be sent to userspace.  This adds code to check for changes in R and C
when we are scanning the HPT to find changed entries, and adds code
to set the changed flag for the HPTE when we update the R and C bits
in the guest view of the HPTE.

Since we now need to set the HPTE changed flag in book3s_64_mmu_hv.c
as well as book3s_hv_rm_mmu.c, we move the note_hpte_modification()
function into kvm_book3s_64.h.

Current Linux guest kernels don't use the hardware updates of R and C
in the HPT, so this change won't affect them.  Linux (or other) kernels
might in future want to use the R and C bits and have them correctly
transferred across when a guest is migrated, so it is better to correct
this deficiency.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add e6500 core to Kconfig description.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Extend processor compatibility names to e6500 cores.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Embedded.Page Table (E.PT) category is not supported yet in e6500 kernel.
Configure TLBnCFG to remove E.PT and E.HV.LRAT categories from VCPUs.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

EPTCFG register defined by E.PT is accessed unconditionally by Linux guests
in the presence of MAV 2.0. Emulate it now.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add support for TLBnPS registers available in MMU Architecture Version
(MAV) 2.0.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Vcpu's MMU default configuration and geometry update logic was buried in
a chunk of code. Move them to dedicated functions to add more clarity.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

MMU registers were exposed to user-space using sregs interface. Add them
to ONE_REG interface using kvmppc_get_one_reg/kvmppc_set_one_reg delegation
mechanism.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Refactor Book3E ONE_REG ioctl implementation to use kvmppc_get_one_reg/
kvmppc_set_one_reg delegation interface introduced by Book3S. This is
necessary for MMU SPRs which are platform specifics.

Get rid of useless case braces in the process.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This allows the exit to user space if emulator request by returning
EMULATE_EXIT_USER. This will be used in subsequent patches in list
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently the instruction emulator code returns EMULATE_EXIT_USER
and common code initializes the "run->exit_reason = .." and
"vcpu->arch.hcall_needed = .." with one fixed reason.
But there can be different reasons when emulator need to exit
to user space. To support that the "run->exit_reason = .."
and "vcpu->arch.hcall_needed = .." initialization is moved a
level up to emulator.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Instruction emulation return EMULATE_DO_PAPR when it requires
exit to userspace on book3s. Similar return is required
for booke. EMULATE_DO_PAPR reads out to be confusing so it is
renamed to EMULATE_EXIT_USER.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch defines the interface parameter for KVM_SET_GUEST_DEBUG
ioctl support. Follow up patches will use this for setting up
hardware breakpoints, watchpoints and software breakpoints.

Also kvm_arch_vcpu_ioctl_set_guest_debug() is brought one level below.
This is because I am not sure what is required for book3s. So this ioctl
behaviour will not change for book3s.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Kernel can only access pages which maps as memory.
So flush only the valid kernel pages.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

complete_mmio_load writes back the mmio result into the
destination register.  Doing this on a store results in
register corruption.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds the one_reg interface to get the special instruction
to be used for setting software breakpoint from userspace.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently kvmppc_core_dequeue_external() takes a struct kvm_interrupt *
argument and does nothing with it, in any of its implementations.
This removes it in order to make things easier for forthcoming
in-kernel interrupt controller emulation code.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Commit 523f0e54 ("KVM: PPC: E500:
Explicitly mark shadow maps invalid") began using E500_TLB_VALID
for guest TLB1 entries, and skipping invalidations if it's not set.

However, when E500_TLB_VALID was set for such entries, it was on a
fake local ref, and so the invalidations never happen.  gtlb_privs
is documented as being only for guest TLB0, though we already violate
that with E500_TLB_BITMAP.

Now that we have MMU notifiers, and thus don't need to actually
retain a reference to the mapped pages, get rid of tlb_refs, and
use gtlb_privs for E500_TLB_VALID in TLB1.

Since we can have more than one host TLB entry for a given tlbe_ref,
be careful not to clear existing flags that are relevant to other
host TLB entries when preparing a new host TLB entry.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

It's possible that we're using the same host TLB1 slot to map (a
presumably different portion of) the same guest TLB1 entry.  Clear
the bit in the map before setting it, so that if the esels are the same
the bit will remain set.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add one to esel values in h2g_tlb1_rmap, so that "no mapping" can be
distinguished from "esel 0".  Note that we're not saved by the fact
that host esel 0 is reserved for non-KVM use, because KVM host esel
numbering is not the raw host numbering (see to_htlb1_esel).
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Installed debug handler will be used for guest debug support
and debug facility emulation features (patches for these
features will follow this patch).
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
[bharat.bhushan@freescale.com: Substantial changes]
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

If userspace wants to change some specific bits of TSR
(timer status register) then it uses GET/SET_SREGS ioctl interface.
So the steps will be:
      i)   user-space will make get ioctl,
      ii)  change TSR in userspace
      iii) then make set ioctl.
It can happen that TSR gets changed by kernel after step i) and
before step iii).

To avoid this we have added below one_reg ioctls for oring and clearing
specific bits in TSR. This patch adds one registerface for:
     1) setting specific bit in TSR (timer status register)
     2) clearing specific bit in TSR (timer status register)
     3) setting/getting the TCR register. There are cases where we want to only
        change TCR and not TSR. Although we can uses SREGS without
        KVM_SREGS_E_UPDATE_TSR flag but I think one reg is better. I am open
        if someone feels we should use SREGS only here.
     4) getting/setting TSR register
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This is done so that same function can be called from SREGS and
ONE_REG interface (follow up patch).
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Somehow the driver snuck in with these still in it.
Signed-off-by: NBen Collins <ben.c@servergy.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now we use ESID_BITS of kernel address to build proto vsid. So rename
USER_ESIT_BITS to ESID_BITS
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]

This patch change the kernel VSID range so that we limit VSID_BITS to 37.
This enables us to support 64TB with 65 bit VA (37+28). Without this patch
we have boot hangs on platforms that only support 65 bit VA.

With this patch we now have proto vsid generated as below:

We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
from mmu context id and effective segment id of the address.

For user processes max context id is limited to ((1ul << 19) - 5)
for kernel space, we use the top 4 context ids to map address as below
0x7fffc -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
0x7fffd -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
0x7fffe -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
0x7ffff -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]

VSID_BITS and VSID_BITS_1T depends on the context bits  and user esid
bits. Make the dependency explicit
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]

Our kernel is not much good without BINFMT_ELF and this fixes a build
warning on 64 bit allnoconfig builds:

warning: (COMPAT) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF)
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With some CONFIGS it's possible that in ppc_set_hwdebug, brk.len is
uninitialised before being used.  It has been reported that GCC 4.2 will
produce the following error in this case:

  arch/powerpc/kernel/ptrace.c:1479: warning: 'brk.len' is used uninitialized in this function
  arch/powerpc/kernel/ptrace.c:1381: note: 'brk.len' was declared here

This patch corrects this.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Reported-by: NPhilippe De Muyter <phdm@macqel.be>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 5ac47f7a (powerpc: Relocate prom_init.c on 64bit) made
prom_init.c position independent by manually relocating its entries
in the TOC.

We get the address of the TOC entries with the __prom_init_toc_start
linker symbol. If __prom_init_toc_start ends up as an entry in the
TOC then we need to add an offset to get the current address. This is
the case for older toolchains.

On the other hand, if we have a newer toolchain that supports
-mcmodel=medium then __prom_init_toc_start will be created by a
relative offset from r2 (the TOC pointer). Since r2 has already been
relocated, nothing more needs to be done.  Adding an offset in this
case is wrong and Aaro Koskinen and Alexander Graf have noticed noticed
G5 and OpenBIOS breakage.

Alan Modra suggested we just use r2 to get at the TOC which is simpler
and works with both old and new toolchains.
Reported-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnton Blanchard <anton@samba.org>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The Kconfig symbol POWER4_ONLY got removed in commit
694caf02 ("powerpc: Remove
CONFIG_POWER4_ONLY"). Remove its last traces.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 44ae3ab3 forgot to update
the entry for the 970MP rev 1.0 processor when moving some CPU
features bits to the MMU feature bit mask. This breaks booting
on some rare G5 models using that chip revision.
Reported-by: NPhileas Fogg <phileas-fogg@mail.ru>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.0+]

Commit f5339277 accidentally removed
more than just iSeries bits and took out the call to stab_initialize()
thus breaking support for POWER3 processors.

Put it back. (Yes, nobody noticed until now ...)
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.4+]

In commit 887cbce0 ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS")
I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where
needed.  I am not sure what I was thinking.  Instead, just directly
select VIRT_TO_BUS where it is needed.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>