Half of the functions in the mv643xx_eth driver are prefixed by
useless and baroque comment blocks on _what_ those functions do (which
is obvious from the code itself) rather than why, and there's no point
in keeping those comments around.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

A bunch of places in the mv643xx_eth driver use the 'mv643xx_'
prefix.  Since the mv643xx is a chip that includes more than just
ethernet, this patch makes all those places use either no prefix
(for some internal-use-only functions), or the full 'mv643xx_eth_'
prefix.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

The fact that mv643xx_eth is an ethernet driver is pretty obvious,
and having a lot of internal-use-only functions and defines prefixed
with ETH_/ethernet_/eth_ prefixes is rather pointless.  So, get rid
of most of those prefixes.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

Remove the unused rx/tx descriptor field defines, and move the ones
that are actually used to the actual definitions of the rx/tx
descriptor format.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

All except one of the port serial status register bit defines are
unused -- kill the unused ones.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

The only user of the ETH_MIB_VERY_LONG_NAME_HERE defines is the
eth_update_mib_counters() function.  Get rid of the defines by
open-coding the register offsets in the latter.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

Get rid of RX_BUF_OFFSET (which is synonymous with ETH_HW_IP_ALIGN).
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

Replace the nondescriptive names ETH_INT_UNMASK_ALL and
ETH_INT_UNMASK_ALL_EXT by names of the actual fields being masked
and unmasked in the various writes to the interrupt mask registers.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

None of the port status register bit defines are ever used in the
mv643xx_eth driver -- nuke them all.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

Over half of the port serial control register bit defines are never
used, and the PORT_SERIAL_CONTROL_DEFAULT_VALUE define is never used
either.  Keep only those defines that are actually used.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

Delete the defines for SDMA config register bit values that are
never used in the driver, to tidy up the code some more.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

The port config extend register is never changed at run time.
Document the meaning of the initial value, and delete the defines
for the individual bits in this register.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

The mv643xx_eth driver only ever changes bit 0 of the port config
register at run time, the rest of the register bits are fixed (and
always zero).  Document the meaning of the chosen default value,
and get rid of all the defines for each of the individual bits.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

Shorten the various oversized register names in mv643xx_eth.c, to
increase readability.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

This patch performs a reverse topological sort of all functions in
mv643xx_eth.c, so that we can get rid of all forward declarations,
and end up with a more understandable driver due to related functions
being grouped together.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NDale Farnsworth <dale@farnsworth.org>

This patch removes CVS keyword that weren't updated for a long time.

One of them was printed as part of a printk, which also doesn't make
much sense for a 5 year old and no longer updated keyword.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use bitrev16 from lib/bitrev.c.

Use the get_unaligned_be16 to get the crc from the packet, create a
small helper function for this.

Fix a shadowed variable sparse warning:
drivers/bluetooth/hci_bcsp.c:218:26: warning: symbol 'hdr' shadows an earlier one
drivers/bluetooth/hci_bcsp.c:187:5: originally declared here

[akpm@linux-foundation.org: select CONFIG_BITREVERSE, noted by akinobu.mita@gmail.com]
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This restores the effects of "rt2x00: Don't count retries as failure".
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

-tip testing found the following build error:

  drivers/built-in.o: In function `mcs_receive_irq':
  mcs7780.c:(.text+0x4e429): undefined reference to `crc32_le'
  drivers/built-in.o: In function `mcs_hard_xmit':
  mcs7780.c:(.text+0x4e9af): undefined reference to `crc32_le'

with:

  http://redhat.com/~mingo/misc/config-Sun_Jun__8_22_56_14_CEST_2008.bad

the reason is a missing enablement of the CRC32 library in the Kconfig.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch increments the version to 3.92.1.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On 5761 non-e devices, two problems prevent the administrator from
overriding the WOL settings in the device's NVRAM.

The first problem is that GPIO 0 and GPIO 2 have been swapped.  This
change prevented the administrator from turning on WOL when it is
disabled in NVRAM.  The fix is to add a new path for the 5761 that
swaps the two GPIOs in the code as well.

The second problem is that GPIO 1 could not be toggled by the driver
because the GPIO is shared with the debug UART GPIO.  This will prevent
the administrator from being able to turn WOL off if it was enabled in
NVRAM.  The fix is to always disable the debug UART after a GRC reset.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a problem where the TG3_FLAG_10_100_ONLY flag was
testing against the wrong flags variable.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The git commit ef167e27 entitled
"Fix supporting flowctrl code" introduced a bug that prevents 5714S,
5715S and 5780S devices from falling back to a forced link mode.  The
problem is that the added flow control check will always fail if flow
control is set to autoneg and either RX or TX (or both) flow control
is enabled.  The driver defaults to setting flow control to autoneg
and advertises both RX and TX flow control.

The fix is to remove the errant check.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fix race between:
ieee80211_open->ieee80211_led_radio->led_trigger_event->led_set_brightness->iwl3945_led_brightness_set
(which assumes that "led->priv" is not NULL)
and
iwl3945_pci_probe->iwl3945_setup_deferred_work->(...)->iwl3945_bg_alive_start->iwl3945_alive_start->iwl3945_led_register->iwl3945_led_register_led
which sets priv field in struct iwl3945_led
after
led->led_dev.brightness_set = iwl3945_led_brightness_set;
(...)
led_classdev_register(device, &led->led_dev);

http://kerneloops.org/guilty.php?guilty=iwl3945_led_brightness_set&version=2.6.25-release&start=1671168&end=1703935&class=oopsSigned-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Zhu Yi <yi.zhu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: ipw3945-devel@lists.sourceforge.net
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes a data alignment issue in the zd1211rw driver.
The IEEE80211_STYPE_QOS_DATA bit should be used as a bitwise test
to test for the presence of the 2 byte QoS control field.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes an issus that made "iwconfig eth1 power on" non-working.
When we get a "PS sleep" event, we have to confirm this to the firmware.
The confirm happens with a command, but this command is special: the
firmware won't send us a response. if_cs_host_to_card() is setting
priv->dnld_sent anyway, so this variable stayed at DNLD_DATA_SENT and
was never cleared back.

Now I put the special knowledge that the CMD_802_11_PS_MODE with
CMD_SUBCMD_SLEEP_CONFIRMED doesn't need to need a response by directly
clearing the dnld_sent state in lbs_send_confirmsleep().
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When another scan is in progress, a direct scan gets dropped on the
floor.  However, that direct scan is usually the scan that's really
needed by userspace, and gets stomped on by all the broadcast scans the
ipw2200 driver issues internally.  Make sure the direct scan happens
eventually, and as a bonus ensure that the passive scan worker is
cleaned up when appropriate.

The change of request_passive_scan form a struct work to struct
delayed_work is only to make the set_wx_scan() code a bit simpler, it's
still only used with a delay of 0 to match previous behavior.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Some problems have been experienced in the field which cause an oops
in the pppol2tp driver if L2TP tunnels fail while passing data.

The pppol2tp driver uses private data that is referenced via the
sk->sk_user_data of its UDP and PPPoL2TP sockets. This patch makes
sure that the driver uses sock_hold() when it holds a reference to the
sk pointer. This affects its sendmsg(), recvmsg(), getname(),
[gs]etsockopt() and ioctl() handlers.

Tested by ISP where problem was seen. System has been up 10 days with
no oops since running this patch. Without the patch, an oops would
occur every 1-2 days.

Signed-off-by: James Chapman <jchapman@katalix.com> 
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an L2TP daemon closes a tunnel socket while packets are queued in
the tunnel's reorder queue, a kernel warning is logged because the
socket is closed while skbs are still referencing it. The fix is to
purge the queue in the socket's release handler.

WARNING: at include/net/sock.h:351 udp_lib_unhash+0x41/0x68()
Pid: 12998, comm: openl2tpd Not tainted 2.6.25 #8
 [<c0423c58>] warn_on_slowpath+0x41/0x51
 [<c05d33a7>] udp_lib_unhash+0x41/0x68
 [<c059424d>] sk_common_release+0x23/0x90
 [<c05d16be>] udp_lib_close+0x8/0xa
 [<c05d8684>] inet_release+0x42/0x48
 [<c0592599>] sock_release+0x14/0x60
 [<c059299f>] sock_close+0x29/0x30
 [<c046ef52>] __fput+0xad/0x15b
 [<c046f1d9>] fput+0x17/0x19
 [<c046c8c4>] filp_close+0x50/0x5a
 [<c046da06>] sys_close+0x69/0x9f
 [<c04048ce>] syscall_call+0x7/0xb
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable the Philips CPWUA054/00 in p54usb.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes a context assertion in ssb that makes b44 print
out warnings on resume.

This fixes the following kernel oops:
http://www.kerneloops.org/oops.php?number=12732
http://www.kerneloops.org/oops.php?number=11410Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The size was two small by two bytes.

Signed-off-by: Holger Schurig
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

If there are no networks on the free list, expire the oldest one when
creating a new adhoc network.  Because ipw2200 and the ieee80211 stack
don't actually cull old networks and place them back on the free list
unless they are needed for new probe responses, over time the free list
would become empty and creating an adhoc network would fail due to the !
list_empty(...) check.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

WARNING: space prohibited between function name and open parenthesis '('
#22: FILE: drivers/net/wireless/airo.c:2907:
+	while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {

total: 0 errors, 1 warnings, 8 lines checked

./patches/wireless-airo-waitbusy-wont-delay.patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Dan Williams <dcbw@redhat.com>
Cc: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes a kernel crash on rmmod, in the case where the controller
was restarted before doing the rmmod.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Make use of local_irq_save and local_irq_restore rather then the
deprecated save_and_cli and restore_flags calls.
Signed-off-by: NMark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>