Daniel Borkmann says:

====================
pull-request: bpf 2018-08-05

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix bpftool percpu_array dump by using correct roundup to next
   multiple of 8 for the value size, from Yonghong.

2) Fix in AF_XDP's __xsk_rcv_zc() to not returning frames back to
   allocator since driver will recycle frame anyway in case of an
   error, from Jakub.

3) Fix up BPF test_lwt_seg6local test cases to final iproute2
   syntax, from Mathieu.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a writer blocked condition is received without data, the current
consumer cursor is immediately sent. Servers could already receive this
condition in state SMC_INIT without finished tx-setup. This patch
avoids sending a consumer cursor update in this case.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If 'session' is not NULL and is not a PPP pseudo-wire, then we fail to
drop the reference taken by l2tp_session_get().

Fixes: ecd012e4 ("l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()")
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Fix ACL actions error condition handling

Nir says:

Two issues were lately noticed within mlxsw ACL actions error condition
handling. The first patch deals with conflicting actions such as:

 # tc filter add dev swp49 parent ffff: \
   protocol ip pref 10 flower skip_sw dst_ip 192.168.101.1 \
   action goto chain 100 \
   action mirred egress redirect dev swp4

The second action will never execute, however SW model allows this
configuration, while the mlxsw driver cannot allow for it as it
implements actions in sets of up to three actions per set with a single
termination marking. Conflicting actions create a contradiction over
this single marking and thus cannot be configured. The fix replaces a
misplaced warning with an error code to be returned.

Patches 2-4 fix a condition of duplicate destruction of resources. Some
actions require allocation of specific resource prior to setting the
action itself. On error condition this resource was destroyed twice,
leading to a crash when using mirror action, and to a redundant
destruction in other cases, since for error condition rule destruction
also takes care of resource destruction. In order to fix this state a
symmetry in behavior is added and resource destruction also takes care
of removing the resource from rule's resource list.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In previous patch mlxsw_afa_resource_del() was added to avoid a duplicate
resource detruction scenario.
For mirror actions, such duplicate destruction leads to a crash as in:

 # tc qdisc add dev swp49 ingress
 # tc filter add dev swp49 parent ffff: \
   protocol ip chain 100 pref 10 \
   flower skip_sw dst_ip 192.168.101.1 action drop
 # tc filter add dev swp49 parent ffff: \
   protocol ip pref 10 \
   flower skip_sw dst_ip 192.168.101.1 action goto chain 100 \
   action mirred egress mirror dev swp4

Therefore add a call to mlxsw_afa_resource_del() in
mlxsw_afa_mirror_destroy() in order to clear that resource
from rule's resources.

Fixes: d0d13c18 ("mlxsw: spectrum_acl: Add support for mirror action")
Signed-off-by: NNir Dotan <nird@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each tc flower rule uses a hidden count action. As counter resource may
not be available due to limited HW resources, update _counter_create()
and _counter_destroy() pair to follow previously introduced symmetric
error condition handling, add a call to mlxsw_afa_resource_del() as part
of the counter resource destruction.

Fixes: c18c1e18 ("mlxsw: core: Make counter index allocated inside the action append")
Signed-off-by: NNir Dotan <nird@mellanox.com>
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some ACL actions require the allocation of a separate resource
prior to applying the action itself. When facing an error condition
during the setup phase of the action, resource should be destroyed.
For such actions the destruction was done twice which is dangerous
and lead to a potential crash.
The destruction took place first upon error on action setup phase
and then as the rule was destroyed.

The following sequence generated a crash:

 # tc qdisc add dev swp49 ingress
 # tc filter add dev swp49 parent ffff: \
   protocol ip chain 100 pref 10 \
   flower skip_sw dst_ip 192.168.101.1 action drop
 # tc filter add dev swp49 parent ffff: \
   protocol ip pref 10 \
   flower skip_sw dst_ip 192.168.101.1 action goto chain 100 \
   action mirred egress mirror dev swp4

Therefore add mlxsw_afa_resource_del() as a complement of
mlxsw_afa_resource_add() to add symmetry to resource_list membership
handling. Call this from mlxsw_afa_fwd_entry_ref_destroy() to make the
_fwd_entry_ref_create() and _fwd_entry_ref_destroy() pair of calls a
NOP.

Fixes: 140ce421 ("mlxsw: core: Convert fwd_entry_ref list to be generic per-block resource list")
Signed-off-by: NNir Dotan <nird@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spectrum switch ACL action set is built in groups of three actions
which may point to additional actions. A group holds a single record
which can be set as goto record for pointing at a following group
or can be set to mark the termination of the lookup. This is perfectly
adequate for handling a series of actions to be executed on a packet.
While the SW model allows configuration of conflicting actions
where it is clear that some actions will never execute, the mlxsw
driver must block such configurations as it creates a conflict
over the single terminate/goto record value.

For a conflicting actions configuration such as:

 # tc filter add dev swp49 parent ffff: \
   protocol ip pref 10 \
   flower skip_sw dst_ip 192.168.101.1 \
   action goto chain 100 \
   action mirred egress mirror dev swp4

Where it is clear that the last action will never execute, the
mlxsw driver was issuing a warning instead of returning an error.
Therefore replace that warning with an error for this specific
case.

Fixes: 4cda7d8d ("mlxsw: core: Introduce flexible actions support")
Signed-off-by: NNir Dotan <nird@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The shell file for test_lwt_seg6local contains an early iproute2 syntax
for installing a seg6local End.BPF route. iproute2 support for this
feature has recently been upstreamed, but with an additional keyword
required. This patch updates test_lwt_seg6local.sh to the definitive
iproute2 syntax
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Current value for a target abort error is 0x010, however, this value
should in fact be 0x002.  As it stands, the range of error is 0..7 so
it is currently never being detected.  This bug has been in the driver
since the early 2.6.12 days (or before).

Detected by CoverityScan, CID#744290 ("Logically dead code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

use actual protocol family passed by user rather than hardcoded
AF_INTE6 to cerate sockets.
current code is not working for IPv4.
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Signed-off-by: NVaneet Narang <v.narang@samsung.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "Fixes keep trickling in:

  1) Various IP fragmentation memory limit hardening changes from Eric
     Dumazet.

  2) Revert ipv6 metrics leak change, it causes more problems than it
     fixes for now.

  3) Fix WoL regression in stmmac driver, from Jose Abreu.

  4) Netlink socket spectre v1 gadget fix, from Jeremy Cline"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  Revert "net/ipv6: fix metrics leak"
  rxrpc: Fix user call ID check in rxrpc_service_prealloc_one
  net: dsa: Do not suspend/resume closed slave_dev
  netlink: Fix spectre v1 gadget in netlink_create()
  Documentation: dpaa2: Use correct heading adornment
  net: stmmac: Fix WoL for PCI-based setups
  bonding: avoid lockdep confusion in bond_get_stats()
  enic: do not call enic_change_mtu in enic_probe
  ipv4: frags: handle possible skb truesize change
  inet: frag: enforce memory limits earlier
  net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow
  net/mlx5e: Fix null pointer access when setting MTU of vport representor
  net/mlx5e: Set port trust mode to PCP as default
  net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager
  net: dsa: mv88e6xxx: Fix SERDES support on 88E6141/6341
  brcmfmac: fix regression in parsing NVRAM for multiple devices
  iwlwifi: add more card IDs for 9000 series

Previously in squashfs_readpage() when copying data into the page
cache, it used the length of the datablock read from the filesystem
(after decompression).  However, if the filesystem has been corrupted
this data block may be short, which will leave pages unfilled.

The fix for this is to compute the expected number of bytes to copy
from the inode size, and use this to detect if the block is short.
Signed-off-by: NPhillip Lougher <phillip@squashfs.org.uk>
Tested-by: NWilly Tarreau <w@1wt.eu>
Cc: Анатолий Тросиненко <anatoly.trosinenko@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The squashfs fragment reading code doesn't actually verify that the
fragment is inside the fragment table.  The end result _is_ verified to
be inside the image when actually reading the fragment data, but before
that is done, we may end up taking a page fault because the fragment
table itself might not even exist.

Another report from Anatoly and his endless squashfs image fuzzing.
Reported-by: NАнатолий Тросиненко <anatoly.trosinenko@gmail.com>
Acked-by:: Phillip Lougher <phillip.lougher@gmail.com>,
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit df18b504.

This change causes other problems and use-after-free situations as
found by syzbot.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull ARM fix from Russell King:
 "Just a single fix this time around for recent binutils causing build
  problems when generating Thumb-2 code"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+

Commit 2c4541e2 ("mm: use vma_init() to initialize VMAs on stack and
data segments") tried to initialize various left-over ad-hoc vma's
"properly", but actually made things worse for the temporary vma's used
for TLB flushing.

vma_init() doesn't actually initialize all of the vma, just a few
fields, so doing something like

   -       struct vm_area_struct vma = { .vm_mm = tlb->mm, };
   +       struct vm_area_struct vma;
   +
   +       vma_init(&vma, tlb->mm);

was actually very bad: instead of having a nicely initialized vma with
every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma
with only a couple of fields initialized.  And they weren't even fields
that the code in question mostly cared about.

The flush_tlb_range() function takes a "struct vma" rather than a
"struct mm_struct", because a few architectures actually care about what
kind of range it is - being able to only do an ITLB flush if it's a
range that doesn't have data accesses enabled, for example.  And all the
normal users already have the vma for doing the range invalidation.

But a few people want to call flush_tlb_range() with a range they just
made up, so they also end up using a made-up vma.  x86 just has a
special "flush_tlb_mm_range()" function for this, but other
architectures (arm and ia64) do the "use fake vma" thing instead, and
thus got caught up in the vma_init() changes.

At the same time, the TLB flushing code really doesn't care about most
other fields in the vma, so vma_init() is just unnecessary and
pointless.

This fixes things by having an explicit "this is just an initializer for
the TLB flush" initializer macro, which is used by the arm/arm64/ia64
people who mis-use this interface with just a dummy vma.

Fixes: 2c4541e2 ("mm: use vma_init() to initialize VMAs on stack and data segments")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Delete the old VM_BUG_ON_VMA() from zap_pmd_range(), which asserted
that mmap_sem must be held when splitting an "anonymous" vma there.
Whether that's still strictly true nowadays is not entirely clear,
but the danger of sometimes crashing on the BUG is now fairly clear.

Even with the new stricter rules for anonymous vma marking, the
condition it checks for can possible trigger. Commit 44960f2a
("staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem
pages") is good, and originally I thought it was safe from that
VM_BUG_ON_VMA(), because the /dev/ashmem fd exposed to the user is
disconnected from the vm_file in the vma, and madvise(,,MADV_REMOVE)
insists on VM_SHARED.

But after I read John's earlier mail, drawing attention to the
vfs_fallocate() in there: I may be wrong, and I don't know if Android
has THP in the config anyway, but it looks to me like an
unmap_mapping_range() from ashmem's vfs_fallocate() could hit precisely
the VM_BUG_ON_VMA(), once it's vma_is_anonymous().
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There just check the user call ID isn't already in use, hence should
compare user_call_ID with xcall->user_call_ID, which is current
node's user_call_ID.

Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Suggested-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull MMC fix from Ulf Hansson:
 "MMC host: mxcmmc: Fix build error for powerpc"

* tag 'mmc-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mxcmmc: Fix missing parentheses and brace

Pull power management fixes from Rafael Wysocki:
 "These fix the scope of a recent intel_pstate driver optimization used
  incorrectly on some systems due to processor identification ambiguity
  and fix a few issues in the turbostat utility, including three recent
  regressions.

  Specifics:

   - Use ACPI FADT preferred PM Profile to distinguish Skylake desktop
     processors from some server ones with the same model number in
     order to limit the scope of the recent IO-wait boost optimization
     to servers, as intended (Srinivas Pandruvada).

   - Fix several issues in the turbostat utility:
      * Fix the -S option on 1-CPU systems (Len Brown).
      * Fix computations using incorrect processor core counts (Artem
        Bityutskiy).
      * Fix the x2apic debug message (Len Brown).
      * Fix logical node enumeration to allow for non-sequential
        physical nodes (Prarit Bhargava).
      * Fix reported family on modern AMD processors (Calvin Walton).
      * Clarify the RAPL column information in the man page (Len Brown)"

* tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms
  tools/power turbostat: version 18.07.27
  tools/power turbostat: Read extended processor family from CPUID
  tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
  tools/power turbostat: fix x2apic debug message output file
  tools/power turbostat: fix bogus summary values
  tools/power turbostat: fix -S on UP systems
  tools/power turbostat: Update turbostat(8) RAPL throttling column description

Anatoly continues to find issues with fuzzed squashfs images.

This time, corrupt, missing, or undersized data for the page filling
wasn't checked for, because the squashfs_{copy,read}_cache() functions
did the squashfs_copy_data() call without checking the resulting data
size.

Which could result in the page cache pages being incompletely filled in,
and no error indication to the user space reading garbage data.

So make a helper function for the "fill in pages" case, because the
exact same incomplete sequence existed in two places.

[ I should have made a squashfs branch for these things, but I didn't
  intend to start doing them in the first place.

  My historical connection through cramfs is why I got into looking at
  these issues at all, and every time I (continue to) think it's a
  one-off.

  Because _this_ time is always the last time. Right?   - Linus ]
Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
Tested-by: NWilly Tarreau <w@1wt.eu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Amit Pundir and Youling in parallel reported crashes with recent
mainline kernels running Android:

  F DEBUG   : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
  F DEBUG   : Build fingerprint: 'Android/db410c32_only/db410c32_only:Q/OC-MR1/102:userdebug/test-key
  F DEBUG   : Revision: '0'
  F DEBUG   : ABI: 'arm'
  F DEBUG   : pid: 2261, tid: 2261, name: zygote  >>> zygote <<<
  F DEBUG   : signal 7 (SIGBUS), code 2 (BUS_ADRERR), fault addr 0xec00008
  ... <snip> ...
  F DEBUG   : backtrace:
  F DEBUG   :     #00 pc 00001c04  /system/lib/libc.so (memset+48)
  F DEBUG   :     #01 pc 0010c513  /system/lib/libart.so (create_mspace_with_base+82)
  F DEBUG   :     #02 pc 0015c601  /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateMspace(void*, unsigned int, unsigned int)+40)
  F DEBUG   :     #03 pc 0015c3ed  /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateFromMemMap(art::MemMap*, std::__1::basic_string<char, std::__ 1::char_traits<char>, std::__1::allocator<char>> const&, unsigned int, unsigned int, unsigned int, unsigned int, bool)+36)
  ...

This was bisected back to commit bfd40eaf ("mm: fix
vma_is_anonymous() false-positives").

create_mspace_with_base() in the trace above, utilizes ashmem, and with
ashmem, for shared mappings we use shmem_zero_setup(), which sets the
vma->vm_ops to &shmem_vm_ops.  But for private ashmem mappings nothing
sets the vma->vm_ops.

Looking at the problematic patch, it seems to add a requirement that one
call vma_set_anonymous() on a vma, otherwise the dummy_vm_ops will be
used.  Using the dummy_vm_ops seem to triggger SIGBUS when traversing
unmapped pages.

Thus, this patch adds a call to vma_set_anonymous() for ashmem private
mappings and seems to avoid the reported problem.

Fixes: bfd40eaf ("mm: fix vma_is_anonymous() false-positives")
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Colin Cross <ccross@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Reported-by: NAmit Pundir <amit.pundir@linaro.org>
Reported-by: NYouling 257 <youling257@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit bfd40eaf ("mm: fix vma_is_anonymous() false-positives") made
newly allocated vma's have a dummy vm_ops field so that they wouldn't be
mistaken for anonymous mappings, and if you wanted an anonymous vma you
had to explicitly say so by calling "vma_set_anonymous()" on it.

However, it missed the two special vmas that ia64 processes have: the
register backing store and the NaT page.  So they wouldn't actually act
like anonymous ranges, and page faults on them caused a SIGBUS rather
than the creation of a new anon page in them.

That obviously will make any ia64 binary very unhappy indeed, and the
boot fails early.

Fixes: bfd40eaf ("mm: fix vma_is_anonymous() false-positives")
Reported-by: NTony Luck <tony.luck@intel.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a DSA slave network device was previously disabled, there is no need
to suspend or resume it.

Fixes: 24462549 ("net: dsa: allow switch drivers to implement suspend/resume hooks")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'protocol' is a user-controlled value, so sanitize it after the bounds
check to avoid using it for speculative out-of-bounds access to arrays
indexed by it.

This addresses the following accesses detected with the help of smatch:

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_keys' [w]

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_key_strings' [w]

* net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre
  issue 'nl_table' [w] (local cap)

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NJeremy Cline <jcline@redhat.com>
Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add overline heading adornment to document title in order to comply
with kernel doc requirements.

Fixes: 60b91319 staging: fsl-mc: Convert documentation to rst format
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

WoL won't work in PCI-based setups because we are not saving the PCI EP
state before entering suspend state and not allowing D3 wake.

Fix this by using a wrapper around stmmac_{suspend/resume} which
correctly sets the PCI EP state.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot found that the following sequence produces a LOCKDEP splat [1]

ip link add bond10 type bond
ip link add bond11 type bond
ip link set bond11 master bond10

To fix this, we can use the already provided nest_level.

This patch also provides correct nesting for dev->addr_list_lock

[1]
WARNING: possible recursive locking detected
4.18.0-rc6+ #167 Not tainted
--------------------------------------------
syz-executor751/4439 is trying to acquire lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426

but task is already holding lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&bond->stats_lock)->rlock);
  lock(&(&bond->stats_lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by syz-executor751/4439:
 #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
 #2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215

stack backtrace:
CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline]
 check_deadlock kernel/locking/lockdep.c:1809 [inline]
 validate_chain kernel/locking/lockdep.c:2405 [inline]
 __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435
 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144
 spin_lock include/linux/spinlock.h:310 [inline]
 bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
 dev_get_stats+0x10f/0x470 net/core/dev.c:8316
 bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432
 dev_get_stats+0x10f/0x470 net/core/dev.c:8316
 rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169
 rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611
 rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268
 rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300
 rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline]
 rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716
 notifier_call_chain+0x180/0x390 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735
 call_netdevice_notifiers net/core/dev.c:1753 [inline]
 netdev_features_change net/core/dev.c:1321 [inline]
 netdev_change_features+0xb3/0x110 net/core/dev.c:7759
 bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120
 bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755
 bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528
 dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327
 dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493
 sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992
 sock_ioctl+0x30d/0x680 net/socket.c:1093
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440859
Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859
RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390
R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge turbostat utility fixes for final 4.18:

 - Fix the -S option on 1-CPU systems.
 - Fix computations using incorrect processor core counts.
 - Fix the x2apic debug message.
 - Fix logical node enumeration to allow for non-sequential physical nodes.
 - Fix reported family on modern AMD processors.
 - Clarify the RAPL column information in the man page.

* pm-tools:
  tools/power turbostat: version 18.07.27
  tools/power turbostat: Read extended processor family from CPUID
  tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
  tools/power turbostat: fix x2apic debug message output file
  tools/power turbostat: fix bogus summary values
  tools/power turbostat: fix -S on UP systems
  tools/power turbostat: Update turbostat(8) RAPL throttling column description

In commit ab123fe0 ("enic: handle mtu change for vf properly")
ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being
called without rtnl held. enic_probe() calls enic_change_mtu()
without rtnl held. At this point netdev is not registered yet.
Remove call to enic_change_mtu and assign the mtu to netdev->mtu.

Fixes: ab123fe0 ("enic: handle mtu change for vf properly")
Signed-off-by: NGovindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_frag_queue() might call pskb_pull() on one skb that
is already in the fragment queue.

We need to take care of possible truesize change, or we
might have an imbalance of the netns frags memory usage.

IPv6 is immune to this bug, because RFC5722, Section 4,
amended by Errata ID 3089 states :

  When reassembling an IPv6 datagram, if
  one or more its constituent fragments is determined to be an
  overlapping fragment, the entire datagram (and any constituent
  fragments) MUST be silently discarded.

Fixes: 158f323b ("net: adjust skb->truesize in pskb_expand_head()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently check current frags memory usage only when
a new frag queue is created. This allows attackers to first
consume the memory budget (default : 4 MB) creating thousands
of frag queues, then sending tiny skbs to exceed high_thresh
limit by 2 to 3 order of magnitude.

Note that before commit 648700f7 ("inet: frags: use rhashtables
for reassembly units"), work queue could be starved under DOS,
getting no cpu cycles.
After commit 648700f7, only the per frag queue timer can eventually
remove an incomplete frag queue and its skbs.

Fixes: b13d3cbf ("inet: frag: move eviction of queues to work queue")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NJann Horn <jannh@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Oskolkov <posk@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-07-31

The following series includes four mlx5 fixes.

Please pull and let me know if there's any problem.

For -stable v4.14
net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager

For -stable v4.16
net/mlx5e: Set port trust mode to PCP as default

For -stable v4.17
net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull audit fix from Paul Moore:
 "A single small audit fix to guard against memory allocation failures
  when logging information about a kernel module load.

  It's small, easy to understand, and self-contained; while nothing is
  zero risk, this should be pretty low"

* tag 'audit-pr-20180731' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: fix potential null dereference 'context->module.name'

After introduction of the cited commit, mlx5e_build_nic_params
receives the netdevice mtu in order to set the sw_mtu of mlx5e_params.
For enhanced IPoIB, the netdevice mtu is not set in this stage,
therefore, the initial sw_mtu equals zero. As a result, the hw_mtu
of the receive queue will be calculated incorrectly causing traffic
issues.

To fix this issue, query for port mtu before building the nic params.

Fixes: 472a1e44 ("net/mlx5e: Save MTU in channels params")
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

MTU helper function is used by both conventional mlx5e
instances (PF/VF) and the eswitch representors. The representor
shouldn't change the nic vport context MTU, the VF is responsible for
that. Therefore set_mtu_cb has a null value when changing the
representor MTU.

Fixes: 250a42b6 ("net/mlx5e: Support configurable MTU for vport representors")
Signed-off-by: NAdi Nissim <adin@mellanox.com>
Reviewed-by: NYevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The hairpin offload code has dependency on the trust mode being PCP.

Hence we should set PCP as the default for handling cases where we are
disallowed to read the trust mode from the FW, or failed to initialize it.

Fixes: 106be53b ('net/mlx5e: Set per priority hairpin pairs')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Execute mlx5_eswitch_init() only if we have MLX5_ESWITCH_MANAGER
capabilities.
Do the same for mlx5_eswitch_cleanup().

Fixes: a9f7705f ("net/mlx5: Unify vport manager capability check")
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Version 1 of the patch adding SERDES support to the 88E6141/6341
correctly added the ops to the 88E6141/6341. However, by the time
version 3 was committed, the ops had moved to the 88E6085/6175. Put
them back where they belong.

Fixes: 5bafeb6e ("net: dsa: mv88e6xxx: 88E6141/6341 SERDES support")
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>