Replace all remaining handling of GRAPHICS_VER {==,>=} 10 with
{==,>=} 11. With the removal of CNL, there is no platform with graphics
version equals 10.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728215946.1573015-24-lucas.demarchi@intel.com

PSF GV points are an additional factor that can limit the
bandwidth available to display, separate from the traditional
QGV points.  Whereas traditional QGV points represent possible
memory clock frequencies, PSF GV points reflect possible
frequencies of the memory fabric.

Switching between PSF GV points has the advantage of incurring
almost no memory access block time and thus does not need to be
accounted for in watermark calculations.

This patch adds support for those on top of regular QGV points.
Those are supposed to be used simultaneously, i.e we are always
at some QGV and some PSF GV point, based on the current video
mode requirements.
Bspec: 64631, 53998

v2: Seems that initial assumption made during ml conversation
    was wrong, PCode rejects any masks containing points beyond
    the ones returned, so even though BSpec says we have around
    8 points theoretically, we can mask/unmask only those which
    are returned, trying to manipulate those beyond causes a
    failure from PCode. So switched back to generating mask
    from 1 - num_qgv_points, where num_qgv_points is the actual
    amount of points, advertised by PCode.

v3: - Extended restricted qgv point mask to 0xf, as we have now
      3:2 bits for PSF GV points(Matt Roper)
    - Replaced val2 with NULL from PCode request, since its not being
      used(Matt Roper)
    - Replaced %d to 0x%x for better readability(thanks for spotting)
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210531064845.4389-2-stanislav.lisovskiy@intel.com

The current interrupt handler is getting increasingly complicated and
Xe_HP changes will bring even more complexity.  Let's split off a new
interrupt handler starting with DG1 (i.e., when the master tile
interrupt register was added to the design) and use that as the basis
for the new Xe_HP changes.

Now that we track the hardware IP's release number as well as the
version number, we can also properly define DG1 has version "12.10" and
replace the has_master_unit_irq feature flag with an IP version test.

Bspec: 50875
Cc: Daniele Spurio Ceraolo <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NTomasz Lis <tomasz.lis@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-5-matthew.d.roper@intel.com

DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics.
There are two variants (treated as subplatforms in the code):  DG2-G10
and DG2-G11 that require independent programming in some areas (e.g.,
workarounds).

Bspec: 44472, 44474, 46197, 48028, 48077
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-4-matthew.d.roper@intel.com

XeHP SDV is a Intel® dGPU without display. This is just the definition
of some basic platform macros, by large a copy of current state of
Tigerlake which does not reflect the end state of this platform.

v2:
 - Switch to intel_step infrastructure for stepping matches. (Jani)
v3:
 - Bring earlier in patch series and leave addition of new media engines
   to the engine mask for a later patch.

Bspec: 44467, 48077
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NStuart Summers <stuart.summers@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-3-matthew.d.roper@intel.com

Besides the arch version returned by GRAPHICS_VER(), new platforms
contain a "release id" to make clear the difference from one platform to
another.

The release id number is not formally defined by hardware until future
platforms that will expose it via a new GMD_ID register.  For the
platforms we support before that register becomes available we will set
the values in software and we can set them as we please. So the plan is
to set them so we can group different features under a single
GRAPHICS_VER_FULL() check.

After GMD_ID is used, the usefulness of a "full version check" will be
greatly reduced and will be mostly used for deciding workarounds and a
few code paths. So it makes sense to keep it as a separate field from
graphics_ver. Also, as a platform with `release == n` may be closer
feature-wise to `n - 2` than to `n - 1`, use the word "release" rather
than the more common "minor" for this

This is a mix of 2 independent changes: one by me and the other by Matt
Roper.

v2:
  - Reword commit message to make it clearer why we don't call it
    "minor" (Matt Roper and Tvrtko)
  - Rename variables s/*_ver_release/*_rel/ and print them in a single
    line formatted as {ver}.{rel:2} (Jani and Matt Roper)

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-2-lucas.demarchi@intel.com
(cherry picked from commit ca6374e2)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>

Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround).  This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.

Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does.  This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code.  If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.

We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds.  But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.

[mattrope: Split out display changes to apply through intel-next tree]
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com

We're past the point at which we usually drop workarounds that were
never needed on production hardware.  The driver will already print an
error and apply taint if loaded on pre-production hardware.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-13-matthew.d.roper@intel.com

All of the Cannon Lake hardware that came out had graphics fused off,
and our userspace drivers have already dropped their support for the
platform; CNL-specific code in i915 that isn't inherited by subsequent
platforms is effectively dead code.  Let's remove all of the
CNL-specific workarounds as a quick and easy first step.

References: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6899Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-12-matthew.d.roper@intel.com

Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.

This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.

v2:
 - Use COMMON_STEP() macro in table.  (Anusha)

Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com

Switch RKL to use a revid->stepping table as we're trying to do on all
platforms going forward.

Bspec: 44501
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-10-matthew.d.roper@intel.com

Switch JSL/EHL to use a revid->stepping table as we're trying to do on
all platforms going forward.

v2:
 - Use COMMON_STEP().  (Anusha)

Bspec: 29153
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-9-matthew.d.roper@intel.com

Switch ICL to use a revid->stepping table as we're trying to do on all
platforms going forward.  While we're at it, let's include some
additional steppings that have popped up, even if we don't yet have any
workarounds tied to those steppings (we probably need to audit our
workaround list soon to see if any of the bounds have moved or if new
workarounds have appeared).

Note that the current bspec table is missing information about how to
map PCI revision ID to GT/display steppings; it only provides an SoC
stepping.  The mapping to GT/display steppings (which aren't always the
same as the SoC stepping) used to be in the bspec, but was apparently
dropped during an update in Nov 2019; I've made my changes here based on
an older bspec snapshot that still had the necessary information.  We've
requested that the missing information be restored.

I'm only including the production revids in the table here since we're
past the point at which we usually stop trying to support pre-production
hardware.  An appropriate check is added to
intel_detect_preproduction_hw() to print an error and taint the kernel
just in case someone still tries to load the driver on old
pre-production hardware.

v2:
 - Drop pre-production steppings and add error/taint at startup when
   loading on pre-production hardware.

Bspec: 21141  # pre-Nov 2019 snapshot
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-8-matthew.d.roper@intel.com

Switch GLK to use a revid->stepping table as we're trying to do on all
platforms going forward.  Pre-production and placeholder revisions are
omitted.

Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.

Bspec: 19131
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-7-matthew.d.roper@intel.com

Switch BXT to use a revid->stepping table as we're trying to do on all
platforms going forward.  Note that the REVID macros we had before
weren't being used anywhere in the code and weren't even correct; the
table values come from the bspec (and omits all the placeholder and
preproduction revisions).

Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.

Bspec: 13620
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-6-matthew.d.roper@intel.com

Switch SKL to use a revid->stepping table as we're trying to do on all
platforms going forward.  Also drop the preproduction revisions and add
the newer steppings we hadn't already handled.

Note that SKL has a case where a newer revision ID corresponds to an
older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1).  Also, the lack
of a revision ID 0x8 in the table is intentional and not an oversight.
We'll re-write the KBL-specific comment to make it clear that these kind
of quirks are expected.

v2:
 - Since GT and display steppings are always identical on SKL use a
   macro to set both values at once in a more readable manner.  (Anusha)
 - Drop preproduction steppings.

Bspec: 13626
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-4-matthew.d.roper@intel.com

Besides the arch version returned by GRAPHICS_VER(), new platforms
contain a "release id" to make clear the difference from one platform to
another.

The release id number is not formally defined by hardware until future
platforms that will expose it via a new GMD_ID register.  For the
platforms we support before that register becomes available we will set
the values in software and we can set them as we please. So the plan is
to set them so we can group different features under a single
GRAPHICS_VER_FULL() check.

After GMD_ID is used, the usefulness of a "full version check" will be
greatly reduced and will be mostly used for deciding workarounds and a
few code paths. So it makes sense to keep it as a separate field from
graphics_ver. Also, as a platform with `release == n` may be closer
feature-wise to `n - 2` than to `n - 1`, use the word "release" rather
than the more common "minor" for this

This is a mix of 2 independent changes: one by me and the other by Matt
Roper.

v2:
  - Reword commit message to make it clearer why we don't call it
    "minor" (Matt Roper and Tvrtko)
  - Rename variables s/*_ver_release/*_rel/ and print them in a single
    line formatted as {ver}.{rel:2} (Jani and Matt Roper)

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-2-lucas.demarchi@intel.com

The 'has_cdclk_crawl' field in our device info structure is a boolean
flag and doesn't need a whole u8.  Add it as another 1-bit feature flag
and move it to the display section.  While we're at it, replace the
has_cdclk_crawl() function with a macro for consistency with our
handling of other feature flags.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707234206.2002849-1-matthew.d.roper@intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Now that all the codebase is converted to the new *VER macros, remove
the old GEN ones.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707181325.2130821-4-lucas.demarchi@intel.com

Just pass the full atomic state+crtc to the pre-skl watermark
functions, and clean up the types/variable names around the area.

Note that having both .compute_pipe_wm() and .compute_intermediate_wm()
is entirely redundant now. We could unify them to a single vfunc.
But let's do this one step at a time.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-5-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Not much point in dynamically allocating the line length
buffer mm node that I can see. Just embed it directly like
we do the for the cfb node. One less failure point to worry
about.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-4-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

Let's call the compression limit the limit.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-2-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

This workaround is specific for a particular panel on Google
chromebook project. When user space daemon enter idle state.
It request adjust brightness to 0, turn backlight_enable signal
off and keep eDP main link active.

On general LCD, this behavior might not be a problem.
But on this panel, its tcon would expect source to execute
full eDP power off sequence after drop backlight_enable signal.
Without eDP power off sequence. Even source try to turn
backlight_enable signal on and restore proper brightness level.
This panel is not able to light on again.

This WA ignored the request from user space daemon to disable
backlight_enable signal and keep it on always. When user space
request kernel to turn eDP display off, kernel driver still
can control backlight_enable signal properly. It would not
impact standard eDP power off sequence.

v2: 1. modify the quirk name and debug messages.
    2. unregister backlight.power callback for specific device.
v3: 1. modify debug output messages.
    2. use DMI_EXACT_MATCH instead of DMI_MATCH.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: NLee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624053932.21037-1-shawn.c.lee@intel.com

For some reason coccinelle misses a few cases in header files with calls to
INTEL_GEN()/IS_GEN(). Do a manual conversion for those.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-6-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-3-lucas.demarchi@intel.com

Move struct intel_dmc from i915_drv.h to intel_dmc.h.

v2: Add includes along with moving the struct.
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-4-anusha.srivatsa@intel.com

Temporarily remove the buddy allocator and related selftests
and hook up the TTM range manager for i915 regions.

Also modify the mock region selftests somewhat to account for a
fragmenting manager.
Signed-off-by: NThomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602083818.241793-2-thomas.hellstrom@linux.intel.com

This reverts commit b739f125.

We are unfortunately seeing more issues like we did in 293837b9
("Revert "i915: fix remap_io_sg to verify the pgprot""), except this is
now for the vm_fault_gtt path, where we are now hitting the same
BUG_ON(!pte_none(*pte)):

[10887.466150] kernel BUG at mm/memory.c:2183!
[10887.466162] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[10887.466168] CPU: 0 PID: 7775 Comm: ffmpeg Tainted: G     U            5.13.0-rc3-CI-Nightly #1
[10887.466174] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.40 07/14/2017
[10887.466177] RIP: 0010:remap_pfn_range_notrack+0x30f/0x440
[10887.466188] Code: e8 96 d7 e0 ff 84 c0 0f 84 27 01 00 00 48 ba 00 f0 ff ff ff ff 0f 00 4c 89 e0 48 c1 e0 0c 4d 85 ed 75 96 48 21 d0 31 f6 eb a9 <0f> 0b 48 39 37 0f 85 0e 01 00 00 48 8b 0c 24 48 39 4f 08 0f 85 00
[10887.466193] RSP: 0018:ffffc90006e33c50 EFLAGS: 00010286
[10887.466198] RAX: 800000000000002f RBX: 00007f5e01800000 RCX: 0000000000000028
[10887.466201] RDX: 0000000000000001 RSI: ffffea0000000000 RDI: 0000000000000000
[10887.466204] RBP: ffffea000033fea8 R08: 800000000000002f R09: ffff8881072256e0
[10887.466207] R10: ffffc9000b84fff8 R11: 0000000017dab000 R12: 0000000000089f9f
[10887.466210] R13: 800000000000002f R14: 00007f5e017e4000 R15: ffff88800cffaf20
[10887.466213] FS:  00007f5e04849640(0000) GS:ffff888278000000(0000) knlGS:0000000000000000
[10887.466216] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[10887.466220] CR2: 00007fd9b191a2ac CR3: 00000001829ac000 CR4: 00000000003506f0
[10887.466223] Call Trace:
[10887.466233]  vm_fault_gtt+0x1ca/0x5d0 [i915]
[10887.466381]  ? ktime_get+0x38/0x90
[10887.466389]  __do_fault+0x37/0x90
[10887.466395]  __handle_mm_fault+0xc46/0x1200
[10887.466402]  handle_mm_fault+0xce/0x2a0
[10887.466407]  do_user_addr_fault+0x1c5/0x660

Reverting this commit is reported to fix the issue.
Reported-by: NEero Tamminen <eero.t.tamminen@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3519
Fixes: b739f125 ("i915: use io_mapping_map_user")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527185145.458021-1-matthew.auld@intel.com
(cherry picked from commit 0e4fe0c9)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This reverts commit b739f125.

We are unfortunately seeing more issues like we did in 293837b9
("Revert "i915: fix remap_io_sg to verify the pgprot""), except this is
now for the vm_fault_gtt path, where we are now hitting the same
BUG_ON(!pte_none(*pte)):

[10887.466150] kernel BUG at mm/memory.c:2183!
[10887.466162] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[10887.466168] CPU: 0 PID: 7775 Comm: ffmpeg Tainted: G     U            5.13.0-rc3-CI-Nightly #1
[10887.466174] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.40 07/14/2017
[10887.466177] RIP: 0010:remap_pfn_range_notrack+0x30f/0x440
[10887.466188] Code: e8 96 d7 e0 ff 84 c0 0f 84 27 01 00 00 48 ba 00 f0 ff ff ff ff 0f 00 4c 89 e0 48 c1 e0 0c 4d 85 ed 75 96 48 21 d0 31 f6 eb a9 <0f> 0b 48 39 37 0f 85 0e 01 00 00 48 8b 0c 24 48 39 4f 08 0f 85 00
[10887.466193] RSP: 0018:ffffc90006e33c50 EFLAGS: 00010286
[10887.466198] RAX: 800000000000002f RBX: 00007f5e01800000 RCX: 0000000000000028
[10887.466201] RDX: 0000000000000001 RSI: ffffea0000000000 RDI: 0000000000000000
[10887.466204] RBP: ffffea000033fea8 R08: 800000000000002f R09: ffff8881072256e0
[10887.466207] R10: ffffc9000b84fff8 R11: 0000000017dab000 R12: 0000000000089f9f
[10887.466210] R13: 800000000000002f R14: 00007f5e017e4000 R15: ffff88800cffaf20
[10887.466213] FS:  00007f5e04849640(0000) GS:ffff888278000000(0000) knlGS:0000000000000000
[10887.466216] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[10887.466220] CR2: 00007fd9b191a2ac CR3: 00000001829ac000 CR4: 00000000003506f0
[10887.466223] Call Trace:
[10887.466233]  vm_fault_gtt+0x1ca/0x5d0 [i915]
[10887.466381]  ? ktime_get+0x38/0x90
[10887.466389]  __do_fault+0x37/0x90
[10887.466395]  __handle_mm_fault+0xc46/0x1200
[10887.466402]  handle_mm_fault+0xce/0x2a0
[10887.466407]  do_user_addr_fault+0x1c5/0x660

Reverting this commit is reported to fix the issue.
Reported-by: NEero Tamminen <eero.t.tamminen@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3519
Fixes: b739f125 ("i915: use io_mapping_map_user")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527185145.458021-1-matthew.auld@intel.com

On XE_LPD, VRR CTL register adds a new VRR Guardband bitfield
replacing the pipeline full and deprecating the pipeline override
bit.

This patch adds this corresponding bitfield in the register defs,
crtc state vrr structure and populates this in vrr compute
config and vrr enable functions. It also adds the corresponding
HW state readout for this field.

Bspec: 50508
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAditya Swarup <aditya.swarup@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-3-matthew.d.roper@intel.com

XE_LPD reduces the number of regular watermark latency levels from 8
to 6 on non-dgfx platforms.  However the hardware also adds a special
purpose SAGV wateramrk (and an accompanying transition watermark) that
will be used by the hardware in place of the level 0 values during SAGV
transitions.

Bspec: 49325, 49326, 50419
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-4-lucas.demarchi@intel.com

No functional change.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-3-anusha.srivatsa@intel.com

No functional change.

v2: Chchpatch fixes.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-2-anusha.srivatsa@intel.com

i915 does not use DRM legacy code. Remove the rsp include statements.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516185937.5644-2-tzimmermann@suse.de

This will allow us to better implement workarounds.

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-17-matthew.d.roper@intel.com

Add ADL-P to the device_info table and support MACROS.

Bspec: 49185, 55372, 55373
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-4-imre.deak@intel.com

Replace the home-grown remap_io_mapping that abuses apply_to_page_range
with the proper io_mapping_map_user interface.

Link: https://lkml.kernel.org/r/20210326055505.1424432-4-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The stop_machine() lock may allocate memory, but is called inside
vm->mutex, which is taken in the shrinker. This will cause a lockdep
splat, as can be seen below:

<4>[  462.585762] ======================================================
<4>[  462.585768] WARNING: possible circular locking dependency detected
<4>[  462.585773] 5.12.0-rc5-CI-Trybot_7644+ #1 Tainted: G     U
<4>[  462.585779] ------------------------------------------------------
<4>[  462.585783] i915_selftest/5540 is trying to acquire lock:
<4>[  462.585788] ffffffff826440b0 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x12/0x30
<4>[  462.585814]
                  but task is already holding lock:
<4>[  462.585818] ffff888125369c70 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x38e/0xb40 [i915]
<4>[  462.586301]
                  which lock already depends on the new lock.

<4>[  462.586305]
                  the existing dependency chain (in reverse order) is:
<4>[  462.586309]
                  -> #2 (&vm->mutex/1){+.+.}-{3:3}:
<4>[  462.586323]        i915_gem_shrinker_taints_mutex+0x2d/0x50 [i915]
<4>[  462.586719]        i915_address_space_init+0x12d/0x130 [i915]
<4>[  462.587092]        ppgtt_init+0x4e/0x80 [i915]
<4>[  462.587467]        gen8_ppgtt_create+0x3e/0x5c0 [i915]
<4>[  462.587828]        i915_ppgtt_create+0x28/0xf0 [i915]
<4>[  462.588203]        intel_gt_init+0x123/0x370 [i915]
<4>[  462.588572]        i915_gem_init+0x129/0x1f0 [i915]
<4>[  462.588971]        i915_driver_probe+0x753/0xd80 [i915]
<4>[  462.589320]        i915_pci_probe+0x43/0x1d0 [i915]
<4>[  462.589671]        pci_device_probe+0x9e/0x110
<4>[  462.589680]        really_probe+0xea/0x410
<4>[  462.589690]        driver_probe_device+0xd9/0x140
<4>[  462.589697]        device_driver_attach+0x4a/0x50
<4>[  462.589704]        __driver_attach+0x83/0x140
<4>[  462.589711]        bus_for_each_dev+0x75/0xc0
<4>[  462.589718]        bus_add_driver+0x14b/0x1f0
<4>[  462.589724]        driver_register+0x66/0xb0
<4>[  462.589731]        i915_init+0x70/0x87 [i915]
<4>[  462.590053]        do_one_initcall+0x56/0x2e0
<4>[  462.590061]        do_init_module+0x55/0x200
<4>[  462.590068]        load_module+0x2703/0x2990
<4>[  462.590074]        __do_sys_finit_module+0xad/0x110
<4>[  462.590080]        do_syscall_64+0x33/0x80
<4>[  462.590089]        entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[  462.590096]
                  -> #1 (fs_reclaim){+.+.}-{0:0}:
<4>[  462.590109]        fs_reclaim_acquire+0x9f/0xd0
<4>[  462.590118]        kmem_cache_alloc_trace+0x3d/0x430
<4>[  462.590126]        intel_cpuc_prepare+0x3b/0x1b0
<4>[  462.590133]        cpuhp_invoke_callback+0x9e/0x890
<4>[  462.590141]        _cpu_up+0xa4/0x130
<4>[  462.590147]        cpu_up+0x82/0x90
<4>[  462.590153]        bringup_nonboot_cpus+0x4a/0x60
<4>[  462.590159]        smp_init+0x21/0x5c
<4>[  462.590167]        kernel_init_freeable+0x8a/0x1b7
<4>[  462.590175]        kernel_init+0x5/0xff
<4>[  462.590181]        ret_from_fork+0x22/0x30
<4>[  462.590187]
                  -> #0 (cpu_hotplug_lock){++++}-{0:0}:
<4>[  462.590199]        __lock_acquire+0x1520/0x2590
<4>[  462.590207]        lock_acquire+0xd1/0x3d0
<4>[  462.590213]        cpus_read_lock+0x39/0xc0
<4>[  462.590219]        stop_machine+0x12/0x30
<4>[  462.590226]        bxt_vtd_ggtt_insert_entries__BKL+0x36/0x50 [i915]
<4>[  462.590601]        ggtt_bind_vma+0x5d/0x80 [i915]
<4>[  462.590970]        i915_vma_bind+0xdc/0x1c0 [i915]
<4>[  462.591374]        i915_vma_pin_ww+0x435/0xb40 [i915]
<4>[  462.591779]        make_obj_busy+0xcb/0x330 [i915]
<4>[  462.592170]        igt_mmap_offset_exhaustion+0x45f/0x4c0 [i915]
<4>[  462.592562]        __i915_subtests.cold.7+0x42/0x92 [i915]
<4>[  462.592995]        __run_selftests.part.3+0x10d/0x172 [i915]
<4>[  462.593428]        i915_live_selftests.cold.5+0x1f/0x47 [i915]
<4>[  462.593860]        i915_pci_probe+0x93/0x1d0 [i915]
<4>[  462.594210]        pci_device_probe+0x9e/0x110
<4>[  462.594217]        really_probe+0xea/0x410
<4>[  462.594226]        driver_probe_device+0xd9/0x140
<4>[  462.594233]        device_driver_attach+0x4a/0x50
<4>[  462.594240]        __driver_attach+0x83/0x140
<4>[  462.594247]        bus_for_each_dev+0x75/0xc0
<4>[  462.594254]        bus_add_driver+0x14b/0x1f0
<4>[  462.594260]        driver_register+0x66/0xb0
<4>[  462.594267]        i915_init+0x70/0x87 [i915]
<4>[  462.594586]        do_one_initcall+0x56/0x2e0
<4>[  462.594592]        do_init_module+0x55/0x200
<4>[  462.594599]        load_module+0x2703/0x2990
<4>[  462.594605]        __do_sys_finit_module+0xad/0x110
<4>[  462.594612]        do_syscall_64+0x33/0x80
<4>[  462.594618]        entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[  462.594625]
                  other info that might help us debug this:

<4>[  462.594629] Chain exists of:
                    cpu_hotplug_lock --> fs_reclaim --> &vm->mutex/1

<4>[  462.594645]  Possible unsafe locking scenario:

<4>[  462.594648]        CPU0                    CPU1
<4>[  462.594652]        ----                    ----
<4>[  462.594655]   lock(&vm->mutex/1);
<4>[  462.594664]                                lock(fs_reclaim);
<4>[  462.594671]                                lock(&vm->mutex/1);
<4>[  462.594679]   lock(cpu_hotplug_lock);
<4>[  462.594686]
                   *** DEADLOCK ***

<4>[  462.594690] 4 locks held by i915_selftest/5540:
<4>[  462.594696]  #0: ffff888100fbc240 (&dev->mutex){....}-{3:3}, at: device_driver_attach+0x18/0x50
<4>[  462.594715]  #1: ffffc900006cb9a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: make_obj_busy+0x81/0x330 [i915]
<4>[  462.595118]  #2: ffff88812a6081e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: make_obj_busy+0x21f/0x330 [i915]
<4>[  462.595519]  #3: ffff888125369c70 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x38e/0xb40 [i915]
<4>[  462.595934]
                  stack backtrace:
<4>[  462.595939] CPU: 0 PID: 5540 Comm: i915_selftest Tainted: G     U            5.12.0-rc5-CI-Trybot_7644+ #1
<4>[  462.595947] Hardware name: GOOGLE Kefka/Kefka, BIOS MrChromebox 02/04/2018
<4>[  462.595952] Call Trace:
<4>[  462.595961]  dump_stack+0x7f/0xad
<4>[  462.595974]  check_noncircular+0x12e/0x150
<4>[  462.595982]  ? save_stack.isra.17+0x3f/0x70
<4>[  462.595991]  ? drm_mm_insert_node_in_range+0x34a/0x5b0
<4>[  462.596000]  ? i915_vma_pin_ww+0x9ec/0xb40 [i915]
<4>[  462.596410]  __lock_acquire+0x1520/0x2590
<4>[  462.596419]  ? do_init_module+0x55/0x200
<4>[  462.596429]  lock_acquire+0xd1/0x3d0
<4>[  462.596435]  ? stop_machine+0x12/0x30
<4>[  462.596445]  ? gen8_ggtt_insert_entries+0xf0/0xf0 [i915]
<4>[  462.596816]  cpus_read_lock+0x39/0xc0
<4>[  462.596824]  ? stop_machine+0x12/0x30
<4>[  462.596831]  stop_machine+0x12/0x30
<4>[  462.596839]  bxt_vtd_ggtt_insert_entries__BKL+0x36/0x50 [i915]
<4>[  462.597210]  ggtt_bind_vma+0x5d/0x80 [i915]
<4>[  462.597580]  i915_vma_bind+0xdc/0x1c0 [i915]
<4>[  462.597986]  i915_vma_pin_ww+0x435/0xb40 [i915]
<4>[  462.598395]  ? make_obj_busy+0xcb/0x330 [i915]
<4>[  462.598786]  make_obj_busy+0xcb/0x330 [i915]
<4>[  462.599180]  ? 0xffffffff81000000
<4>[  462.599187]  ? debug_mutex_unlock+0x50/0xa0
<4>[  462.599198]  igt_mmap_offset_exhaustion+0x45f/0x4c0 [i915]
<4>[  462.599592]  __i915_subtests.cold.7+0x42/0x92 [i915]
<4>[  462.600026]  ? i915_perf_selftests+0x20/0x20 [i915]
<4>[  462.600422]  ? __i915_nop_setup+0x10/0x10 [i915]
<4>[  462.600820]  __run_selftests.part.3+0x10d/0x172 [i915]
<4>[  462.601253]  i915_live_selftests.cold.5+0x1f/0x47 [i915]
<4>[  462.601686]  i915_pci_probe+0x93/0x1d0 [i915]
<4>[  462.602037]  ? _raw_spin_unlock_irqrestore+0x3d/0x60
<4>[  462.602047]  pci_device_probe+0x9e/0x110
<4>[  462.602057]  really_probe+0xea/0x410
<4>[  462.602067]  driver_probe_device+0xd9/0x140
<4>[  462.602075]  device_driver_attach+0x4a/0x50
<4>[  462.602084]  __driver_attach+0x83/0x140
<4>[  462.602091]  ? device_driver_attach+0x50/0x50
<4>[  462.602099]  ? device_driver_attach+0x50/0x50
<4>[  462.602107]  bus_for_each_dev+0x75/0xc0
<4>[  462.602116]  bus_add_driver+0x14b/0x1f0
<4>[  462.602124]  driver_register+0x66/0xb0
<4>[  462.602133]  i915_init+0x70/0x87 [i915]
<4>[  462.602453]  ? 0xffffffffa0606000
<4>[  462.602458]  do_one_initcall+0x56/0x2e0
<4>[  462.602466]  ? kmem_cache_alloc_trace+0x374/0x430
<4>[  462.602476]  do_init_module+0x55/0x200
<4>[  462.602484]  load_module+0x2703/0x2990
<4>[  462.602500]  ? __do_sys_finit_module+0xad/0x110
<4>[  462.602507]  __do_sys_finit_module+0xad/0x110
<4>[  462.602519]  do_syscall_64+0x33/0x80
<4>[  462.602527]  entry_SYSCALL_64_after_hwframe+0x44/0xae
<4>[  462.602535] RIP: 0033:0x7fab69d8d89d

Changes since v1:
- Add lockdep annotations during init, to ensure that lockdep is primed.
  This also fixes a false positive when reading /proc/lockdep_stats
  during module reload.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426102351.921874-1-maarten.lankhorst@linux.intel.comReviewed-by: NThomas Hellström <thomas.hellstrom@linux.intel.com>

Determine the possible coherent map type based on object location,
and if target has llc or if user requires an always coherent
mapping.

Cc: Matthew Auld <matthew.auld@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Suggested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427085417.120246-2-matthew.auld@intel.com

Add "REGION_STOLEN" device info to dg1, create stolen memory
region from upper portion of local device memory, starting
from DSMBASE.

v2:
    - s/drm_info/drm_dbg; userspace likely doesn't care about stolen.
    - mem->type is only setup after the region probe, so setting the name
      as stolen-local or stolen-system based on this value won't work. Split
      system vs local stolen setup to fix this.
    - kill all the region->devmem/is_devmem stuff. We already differentiate
      the different types of stolen so such things shouldn't be needed
      anymore.
v3:
    - split stolen lmem vs smem ops(Tvrtko)
    - add shortcut for stolen region in i915(Tvrtko)
    - sanity check dsm base vs bar size(Xinyun)
v4(Tvrtko):
    - more cleanup
    - add some TODOs
Signed-off-by: NCQ Tang <cq.tang@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-1-matthew.auld@intel.com

Now that it's not being used anymore, finish its removal. Like for
gen_mask, we replace INTEL_GEN() and IS_GEN()  macros to use the new
field.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
[Jani: Minor code comment change while applying.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-11-lucas.demarchi@intel.com