- 06 7月, 2018 3 次提交
-
-
由 Alex Deucher 提交于
Use the newly exported pci functions to get the link width and speed rather than using the drm duplicated versions. Also query the GPU link caps directly rather than hardcoding them. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Use separate firmware path for amdgpu to avoid conflicts with radeon on CIK parts. v2: squash in logic simplification (Alex) Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
Some HW ip blocks need call SMU to enter/leave power gate state. So export common set_powergating_by_smu interface. 1. keep consistent with set_clockgating_by_smu 2. scales easily to powergate other ip(gfx) if necessary Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 6月, 2018 1 次提交
-
-
由 Rex Zhu 提交于
1. move ac_power to struct pm from dpm, so can be shared with powerplay 2. remove power_source in powerplay, use adev->pm.ac_power instand. 3. update ac_power before dispatch power task. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 16 5月, 2018 2 次提交
-
-
由 Huang Rui 提交于
Signed-off-by: NHuang Rui <ray.huang@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Huang Rui 提交于
It will be used not only for powerplay but also on amdgpu part in future patches. So move it into amd_shared header file. Signed-off-by: NHuang Rui <ray.huang@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 12 4月, 2018 1 次提交
-
-
由 Rex Zhu 提交于
driver will set dpm_enabled to true only when module parameter amdgpu_dpm not equal to 0 and smu hw initialize successfully. Reviewed-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 21 3月, 2018 1 次提交
-
-
由 Rex Zhu 提交于
caused by 'commit 83e3c4615872 ("drm/amdgpu: Remove wrapper layer of smu ip functions")' BUG: unable to handle kernel NULL pointer dereference at 00000000000005d8 [ 313.241459] IP: ci_dpm_read_sensor+0x37/0xf0 [amdgpu] Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 3月, 2018 1 次提交
-
-
由 Rex Zhu 提交于
1. delete amdgpu_powerplay.c used for wrapping smu ip functions 2. delete struct pp_instance, 3. make struct hwmgr as the smu hw handle. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 3月, 2018 1 次提交
-
-
由 Rex Zhu 提交于
The gfx/compute profiling mode switch is only for internally test. Not a complete solution and unexpectly upstream. so revert it. Reviewed-by: NEvan Quan <evan.quan@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 20 2月, 2018 4 次提交
-
-
由 Rex Zhu 提交于
when echo "01">pp_dpm_pcie the pcie dpm will fix in highest link speed. But user should expect auto speed between level 0 and level1 Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
Only when user set manual performance mode, driver enable pp_dpm_force_clock_level. so check the mode in pp_dpm_force_clock_level, and delete the same logic in callback functions. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This is also supported with the read_sensor API and there were no more users of the get_temperature API. Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
And rename it to amdgpu_gmc as well. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NSamuel Li <Samuel.Li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 18 12月, 2017 1 次提交
-
-
由 Alex Deucher 提交于
add device to the name for consistency. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 12月, 2017 1 次提交
-
-
由 Ernst Sjöstrand 提交于
Smatch warned about the following lines: ci_set_mc_special_registers() error: buffer overflow 'table->mc_reg_address' 16 <= 16 tonga_set_mc_special_registers() error: buffer overflow 'table->mc_reg_address' 16 <= 16 Change the logic to check before access instead of after incrementing. It's fine if j reaches max after we're done. This allows the last entry of the array to be filled without an error message for example. Changed some whitespace to clarify grouping. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NErnst Sjöstrand <ernstp@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 05 12月, 2017 1 次提交
-
-
由 Evan Quan 提交于
Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 9月, 2017 1 次提交
-
-
由 Rex Zhu 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 19 9月, 2017 2 次提交
-
-
由 Rex Zhu 提交于
put amd_pm_funcs table in struct powerplay for all asics. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
renamed amdgpu_dpm_funcs and moved to amd_shared.h so can shared with powerplay. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 25 5月, 2017 2 次提交
-
-
由 Alex Deucher 提交于
Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 5月, 2017 1 次提交
-
-
由 Masahiro Yamada 提交于
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-4-git-send-email-yamada.masahiro@socionext.com
-
- 11 5月, 2017 1 次提交
-
-
由 Rex Zhu 提交于
Use the new enums for setting and getting the fan control mode. Fixes problems due to previous inconsistencies between enums. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 4月, 2017 1 次提交
-
-
由 Rex Zhu 提交于
if we set only lowest mclk level enabled, when we enable uvd dpm during boot time, mclk will be fixed in the lowest level. the mclk switch will fail if try to enable other level of mclk at this time. so set all mclk levels enabled. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 30 3月, 2017 4 次提交
-
-
由 Alex Deucher 提交于
Newer asics have a two levels of irq ids now: client id - the IP src id - the interrupt src within the IP v2: integrated Christian's comments. v3: fix rebase fail in SI and CIK Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NKen Wang <Qingqing.Wang@amd.com> Reviewed-by: NKen Wang <Qingqing.Wang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Joe Perches 提交于
Use a more common logging style. Miscellanea: o Coalesce formats and realign arguments o Neaten a few macros now using pr_<level> Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Samuel Pitoiset 提交于
Add the GPU temperature, the shader clock and eventually the memory clock (as well as the GPU load on CI). The main goal is to expose this info to the userspace like Radeon. v2: - add AMDGPU_PP_SENSOR_GPU_LOAD on CI - update the commit description Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com> Acked-by: NRex Zhu <Rex.Zhu@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 09 2月, 2017 2 次提交
-
-
由 Rex Zhu 提交于
v2: clean up vce cg function. use sw cg when vce stoped. 1. implement vce_stop function. 2. not start vce when hw_init. 3. refine vce cg/pg code. 4. delete bypass mode. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
need to start smc when dpm disabled. otherwise, uvd can't get response from smu. so uvd ring test and ib test will timeout. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 28 1月, 2017 5 次提交
-
-
由 Rex Zhu 提交于
Fix up the powergating logic. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Ack-by: NTom St Denis <tom.stdenis@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
in profiling mode, powerplay will fix power state as stable as possible.and disable gfx cg and LBPW feature. profile_standard: as a prerequisite, ensure power and thermal sustainable, set clocks ratio as close to the highest clock ratio as possible. profile_min_sclk: fix mclk as profile_normal, set lowest sclk profile_min_mclk: fix sclk as profile_normal, set lowest mclk profile_peak: set highest sclk and mclk, power and thermal not sustainable profile_exit: exit profile mode. enable gfx cg/lbpw feature. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
In some case, App need to run under max stable clock. so export profiling mode: GFX CG was disabled. and user can select the max stable clock of the device. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 12月, 2016 1 次提交
-
-
由 Rex Zhu 提交于
can't get uvd's state by uvd_enabled. uvd_enabled is used for request higher mclk. in multi-display case, mclk has been in highest clock, no matter uvd's state changed, uvd_enabled will not be changed. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 11月, 2016 1 次提交
-
-
由 Rex Zhu 提交于
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 11 11月, 2016 1 次提交
-
-
由 Rex Zhu 提交于
1. partial revert commit 91db308d6e96. not set uvd bypass mode. 2. enable uvd cg before initialize uvd. 3. set uvd clock to default value 100MHz. Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-