- 21 11月, 2019 6 次提交
-
-
由 Alex Deucher 提交于
This reverts commit 1c425915. S/G display is not stable with the IOMMU enabled on some platforms. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205523Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
There are still combinations of sbios and firmware that are not stable. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204689Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
When gfxoff is enabled, accessing gfx registers via MMIO can lead to a hang. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497Acked-by: NXiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Evan Quan 提交于
For fine grained dpm, there is only two levels supported. However to reflect correctly the current clock frequency, there is an intermediate level faked. Thus on forcing level setting, we need to treat level 2 correctly as level 1. Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NKevin Wang <kevin1.wang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
Otherwise, the error message prompted will confuse user. Signed-off-by: NEvan Quan <evan.quan@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
5.4 and newer works fine with navi14. Reviewed-by: NXiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 11月, 2019 1 次提交
-
-
由 Xiaojie Yuan 提交于
v2: declare as (struct common_firmware_header *) type because struct xxx_firmware_header inherits from it When CE's ucode_id(8) is used to get sdma_hdr, we will be accessing an unallocated amdgpu_firmware_info instance. This issue appears on rhel7.7 with gcc 4.8.5. Newer compilers might have optimized out such 'defined but not referenced' variable. [ 1120.798564] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a [ 1120.806703] IP: [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1120.813693] PGD 80000002603ff067 PUD 271b8d067 PMD 0 [ 1120.818931] Oops: 0000 [#1] SMP [ 1120.822245] Modules linked in: amdgpu(OE+) amdkcl(OE) amd_iommu_v2 amdttm(OE) amd_sched(OE) xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun bridge stp llc devlink ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat iptable_mangle iptable_security iptable_raw nf_conntrack libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dm_mirror dm_region_hash dm_log dm_mod intel_pmc_core intel_powerclamp coretemp intel_rapl joydev kvm_intel eeepc_wmi asus_wmi kvm sparse_keymap iTCO_wdt irqbypass rfkill crc32_pclmul snd_hda_codec_realtek mxm_wmi ghash_clmulni_intel intel_wmi_thunderbolt iTCO_vendor_support snd_hda_codec_generic snd_hda_codec_hdmi aesni_intel lrw gf128mul glue_helper ablk_helper sg cryptd pcspkr snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd pinctrl_sunrisepoint pinctrl_intel soundcore acpi_pad mei_me wmi mei i2c_i801 pcc_cpufreq ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic i915 i2c_algo_bit iosf_mbi drm_kms_helper e1000e syscopyarea sysfillrect sysimgblt fb_sys_fops ahci libahci drm ptp libata crct10dif_pclmul crct10dif_common crc32c_intel serio_raw pps_core drm_panel_orientation_quirks video i2c_hid [ 1120.954136] CPU: 4 PID: 2426 Comm: modprobe Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1 [ 1120.964390] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 1302 11/09/2015 [ 1120.973321] task: ffff991ef1e3c1c0 ti: ffff991ee625c000 task.ti: ffff991ee625c000 [ 1120.981020] RIP: 0010:[<ffffffffc0e3c9b3>] [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1120.990483] RSP: 0018:ffff991ee625f950 EFLAGS: 00010202 [ 1120.995935] RAX: 0000000000000002 RBX: ffff991edf6b2d38 RCX: ffff991edf6a0000 [ 1121.003391] RDX: 0000000000000000 RSI: ffff991f01d13898 RDI: ffffffffc110afb3 [ 1121.010706] RBP: ffff991ee625f9b0 R08: 0000000000000000 R09: 0000000000000000 [ 1121.018029] R10: 00000000000004c4 R11: ffff991ee625f64e R12: ffff991edf6b3220 [ 1121.025353] R13: ffff991edf6a0000 R14: 0000000000000008 R15: ffff991edf6b2d30 [ 1121.032666] FS: 00007f97b0c0b740(0000) GS:ffff991f01d00000(0000) knlGS:0000000000000000 [ 1121.041000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1121.046880] CR2: 000000000000000a CR3: 000000025e604000 CR4: 00000000003607e0 [ 1121.054239] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1121.061631] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1121.068938] Call Trace: [ 1121.071494] [<ffffffffc0e3dba8>] psp_hw_init+0x218/0x270 [amdgpu] [ 1121.077886] [<ffffffffc0da3188>] amdgpu_device_fw_loading+0xe8/0x160 [amdgpu] [ 1121.085296] [<ffffffffc0e3b34c>] ? vega10_ih_irq_init+0x4bc/0x730 [amdgpu] [ 1121.092534] [<ffffffffc0da5c75>] amdgpu_device_init+0x1495/0x1c90 [amdgpu] [ 1121.099675] [<ffffffffc0da9cab>] amdgpu_driver_load_kms+0x8b/0x2f0 [amdgpu] [ 1121.106888] [<ffffffffc01b25cf>] drm_dev_register+0x12f/0x1d0 [drm] [ 1121.113419] [<ffffffffa4dcdfd8>] ? pci_enable_device_flags+0xe8/0x140 [ 1121.120183] [<ffffffffc0da260a>] amdgpu_pci_probe+0xca/0x170 [amdgpu] [ 1121.126919] [<ffffffffa4dcf97a>] local_pci_probe+0x4a/0xb0 [ 1121.132622] [<ffffffffa4dd10c9>] pci_device_probe+0x109/0x160 [ 1121.138607] [<ffffffffa4eb4205>] driver_probe_device+0xc5/0x3e0 [ 1121.144766] [<ffffffffa4eb4603>] __driver_attach+0x93/0xa0 [ 1121.150507] [<ffffffffa4eb4570>] ? __device_attach+0x50/0x50 [ 1121.156422] [<ffffffffa4eb1da5>] bus_for_each_dev+0x75/0xc0 [ 1121.162213] [<ffffffffa4eb3b7e>] driver_attach+0x1e/0x20 [ 1121.167771] [<ffffffffa4eb3620>] bus_add_driver+0x200/0x2d0 [ 1121.173590] [<ffffffffa4eb4c94>] driver_register+0x64/0xf0 [ 1121.179345] [<ffffffffa4dd0905>] __pci_register_driver+0xa5/0xc0 [ 1121.185593] [<ffffffffc099f000>] ? 0xffffffffc099efff [ 1121.190914] [<ffffffffc099f0a4>] amdgpu_init+0xa4/0xb0 [amdgpu] [ 1121.197101] [<ffffffffa4a0210a>] do_one_initcall+0xba/0x240 [ 1121.202901] [<ffffffffa4b1c90a>] load_module+0x271a/0x2bb0 [ 1121.208598] [<ffffffffa4dad740>] ? ddebug_proc_write+0x100/0x100 [ 1121.214894] [<ffffffffa4b1ce8f>] SyS_init_module+0xef/0x140 [ 1121.220698] [<ffffffffa518bede>] system_call_fastpath+0x25/0x2a [ 1121.226870] Code: b4 01 60 a2 00 00 31 c0 e8 83 60 33 e4 41 8b 47 08 48 8b 4d d0 48 c7 c7 b3 af 10 c1 48 69 c0 68 07 00 00 48 8b 84 01 60 a2 00 00 <48> 8b 70 08 31 c0 48 89 75 c8 e8 56 60 33 e4 48 8b 4d d0 48 c7 [ 1121.247422] RIP [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1121.254432] RSP <ffff991ee625f950> [ 1121.258017] CR2: 000000000000000a [ 1121.261427] ---[ end trace e98b35387ede75bd ]--- Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com> Fixes: c5fb9126 ("drm/amdgpu: add firmware header printing for psp fw loading (v2)") Reviewed-by: NKevin Wang <kevin1.wang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 11月, 2019 10 次提交
-
-
由 Alex Deucher 提交于
To properly handle the option parsing ordering. Reviewed-by: NYong Zhao <yong.zhao@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 changzhu 提交于
It needs to add warning to update firmware in gfx9 in case that firmware is too old to have function to realize dummy read in cp firmware. Signed-off-by: Nchangzhu <Changfeng.Zhu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 changzhu 提交于
The GRBM register interface is now capable of bursting 1 cycle per register wr->wr, wr->rd much faster than previous muticycle per transaction done interface. This has caused a problem where status registers requiring HW to update have a 1 cycle delay, due to the register update having to go through GRBM. For cp ucode, it has realized dummy read in cp firmware.It covers the use of WAIT_REG_MEM operation 1 case only.So it needs to call gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to update firmware in case firmware is too old to have function to realize dummy read in cp firmware. For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is moved to gfxhub in gfx10. So it needs to add dummy read in driver between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0. Signed-off-by: Nchangzhu <Changfeng.Zhu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
Otherwise, the feature enablement will be skipped due to wrong count. Fixes: beff74bc ("drm/amdgpu: fix a race in GPU reset with IB test (v2)") Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Kevin Wang 提交于
fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error on vega20 and navi asic. fix commit: drm/amd/powerplay: add function get_workload_type_map for swsmu Signed-off-by: NKevin Wang <kevin1.wang@amd.com> Reviewed-by: NKenneth Feng <kenneth.feng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tianci.Yin 提交于
Add the navi14 PCI device id. Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NTianci.Yin <tianci.yin@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhan Liu 提交于
This reverts commit 385857ad. Reason for revert: Root cause of this issue is found. The workaround is not needed anymore. Signed-off-by: NZhan Liu <zhan.liu@amd.com> Reviewed-by: NHersen Wu <hersenxs.wu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhan Liu 提交于
[Why] Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is because there is no ENGINE_ID_DIGD in Navi14. Without this patch, many HDMI related issues (e.g. HDMI S3 resume failure, HDMI pink screen on boot) will be observed. [How] If "eng_id" is larger than ENGINE_ID_DIGD, then add "eng_id" by 1. Signed-off-by: NZhan Liu <zhan.liu@amd.com> Reviewed-by: NHersen Wu <hersenxs.wu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Shirish S 提交于
[Why] doing kthread_park()/unpark() from drm_sched_entity_fini while GPU reset is in progress defeats all the purpose of drm_sched_stop->kthread_park. If drm_sched_entity_fini->kthread_unpark() happens AFTER drm_sched_stop->kthread_park nothing prevents from another (third) thread to keep submitting job to HW which will be picked up by the unparked scheduler thread and try to submit to HW but fail because the HW ring is deactivated. [How] grab the reset lock before calling drm_sched_entity_fini() Signed-off-by: NShirish S <shirish.s@amd.com> Suggested-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
These were not aligned for optimal performance for GPUVM. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 30 10月, 2019 18 次提交
-
-
由 Nick Desaulniers 提交于
A final attempt at enabling sse2 for GCC users. Orininally attempted in: commit 10117450 ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines") Reverted due to "reported instability" in: commit 193392ed ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"") Re-added just for Clang in: commit 0f0727d9 ("drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines") The original report didn't have enough information to know if the GPF was due to misalignment, but I suspect that it was. (The missing information was the disassembly of the function at the bottom of the trace, to see if the instruction pointer pointed to an instruction with 16B alignment memory operand requirements. The stack trace does show the stack was only 8B but not 16B aligned though, which makes this a strong possibility). Now that the stack misalignment issue has been fixed for users of GCC 7.1+, reattempt adding -msse2. This matches Clang. It will likely never be safe to enable this for pre-GCC 7.1 AND use a 16B aligned stack in these translation units. This is only a functional change for GCC 7.1+ users, and should be boot tested. Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487Signed-off-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nick Desaulniers 提交于
GCC earlier than 7.1 errors when compiling code that makes use of `double`s and sets a stack alignment outside of the range of [2^4-2^12]: $ cat foo.c double foo(double x, double y) { return x + y; } $ gcc-4.9 -mpreferred-stack-boundary=3 foo.c error: -mpreferred-stack-boundary=3 is not between 4 and 12 This is likely why the AMDGPU driver was ever compiled with a different stack alignment (and thus different ABI) than the rest of the x86 kernel. The kernel uses 8B stack alignment, while the driver was using 16B stack alignment in a few places. Since GCC 7.1+ doesn't error, fix the ABI mismatch for users of newer versions of GCC. There was discussion about whether to mark the driver broken or not for users of GCC earlier than 7.1, but since the driver currently is working, don't explicitly break the driver for them here. Relying on differing stack alignment is unspecified behavior, and brittle, and may break in the future. This patch is no functional change for GCC users earlier than 7.1. It's been compile tested on GCC 4.9 and 8.3 to check the correct flags. It should be boot tested when built with GCC 7.1+. -mincoming-stack-boundary= or -mstackrealign may help keep this code building for pre-GCC 7.1 users. The version check for GCC is broken into two conditionals, both because cc-ifversion is currently GCC specific, and it simplifies a subsequent patch. Signed-off-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nick Desaulniers 提交于
The x86 kernel is compiled with an 8B stack alignment via `-mpreferred-stack-boundary=3` for GCC since 3.6-rc1 via commit d9b0cde9 ("x86-64, gcc: Use -mpreferred-stack-boundary=3 if supported") or `-mstack-alignment=8` for Clang. Parts of the AMDGPU driver are compiled with 16B stack alignment. Generally, the stack alignment is part of the ABI. Linking together two different translation units with differing stack alignment is dangerous, particularly when the translation unit with the smaller stack alignment makes calls into the translation unit with the larger stack alignment. While 8B aligned stacks are sometimes also 16B aligned, they are not always. Multiple users have reported General Protection Faults (GPF) when using the AMDGPU driver compiled with Clang. Clang is placing objects in stack slots assuming the stack is 16B aligned, and selecting instructions that require 16B aligned memory operands. At runtime, syscall handlers with 8B aligned stack call into code that assumes 16B stack alignment. When the stack is a multiple of 8B but not 16B, these instructions result in a GPF. Remove the code that added compatibility between the differing compiler flags, as it will result in runtime GPFs when built with Clang. Cleanups for GCC will be sent in later patches in the series. Link: https://github.com/ClangBuiltLinux/linux/issues/735Debugged-by: NYuxuan Shui <yshuiv7@gmail.com> Reported-by: NShirish S <shirish.s@amd.com> Reported-by: NYuxuan Shui <yshuiv7@gmail.com> Suggested-by: NAndrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
These were not aligned for optimal performance for GPUVM. Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NTianci Yin <tianci.yin@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Pelle van Gils 提交于
The vega10_odn_update_soc_table() function does not allow the SCLK dependent voltage to be set for power-state 7 to a value below the default in pptable. Change the for-loop condition to allow undervolting in the highest state. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205277Signed-off-by: NPelle van Gils <pelle@vangils.xyz> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 zhongshiqi 提交于
dc.c:583:null check is needed after using kzalloc function Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: Nzhongshiqi <zhong.shiqi@zte.com.cn> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Zhan liu 提交于
[Why] This patch is for fixing Navi14 HDMI display pink screen issue. [How] Call stream->link->link_enc->funcs->setup twice. This is setting the DIG_MODE to the correct value after having been overridden by the call to transmitter control. Signed-off-by: NZhan Liu <zhan.liu@amd.com> Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michael Strauss 提交于
[WHY] i2c_read is called to differentiate passive DP->HDMI and DP->DVI-D dongles The call is expected to fail in DVI-D case but pass in HDMI case Some HDMI dongles have a chance to fail as well, causing misdetection as DVI-D [HOW] Retry i2c_read to ensure failed result is valid Signed-off-by: NMichael Strauss <michael.strauss@amd.com> Reviewed-by: NTony Cheng <Tony.Cheng@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jun Lei 提交于
Signed-off-by: NJun Lei <Jun.Lei@amd.com> Reviewed-by: NAric Cyr <Aric.Cyr@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Aidan Yang 提交于
[why] There's a use case for inverted gamma and it's been confirmed that negative slopes are ok. [how] Remove code for blocking non-monotonically increasing gamma Signed-off-by: NAidan Yang <Aidan.Yang@amd.com> Reviewed-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Acked-by: NReza Amini <Reza.Amini@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jun Lei 提交于
[why] A display that supports DRR can never really be considered "synchronized" with any other display because we can dynamically enable DRR (i.e. without modeset). this will cause their relative CRTC positions to drift and lose sync. this will disrupt features such as MCLK switching that assume and depend on their permanent alignment (that can only change with modeset) [how] check for ignore_msa in stream when considered synchronizability this ignore_msa is basically actually implemented as "supports drr" Signed-off-by: NJun Lei <Jun.Lei@amd.com> Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com> Acked-by: NAnthony Koo <Anthony.Koo@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Andrey Grodzovsky 提交于
Use ERR_PTR to return back the error happened during amdgpu_ib_schedule. Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tianci.Yin 提交于
update registers: mmCGTT_SPI_CLK_CTRL Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com> Signed-off-by: NTianci.Yin <tianci.yin@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tianci.Yin 提交于
update registers: mmCGTT_SPI_CLK_CTRL Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com> Signed-off-by: NTianci.Yin <tianci.yin@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tianci.Yin 提交于
update registers: mmCGTT_SPI_CLK_CTRL Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com> Signed-off-by: NTianci.Yin <tianci.yin@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Zhan liu 提交于
[Why] DWB (Display Writeback) flag needs to be enabled as 1, or system will throw out a few warnings when creating dcn20 resource pool. Also, Navi14's dwb setting needs to match Navi10's, which has already been set to 1. [How] Change value of num_dwb from 0 to 1. Signed-off-by: NZhan Liu <zhan.liu@amd.com> Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
This seems to help with https://bugs.freedesktop.org/show_bug.cgi?id=111481. v2: insert a NOP instead of skipping all 0-sized IBs to avoid breaking older hw Signed-off-by: NPierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 chen gong 提交于
VKexample test hang during Occlusion/SDMA/Varia runs. Clear XNACK_WATERMK in reg SDMA0_UTCL1_WATERMK to fix this issue. Signed-off-by: Nchen gong <curry.gong@amd.com> Reviewed-by: NAaron Liu <aaron.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 18 10月, 2019 5 次提交
-
-
由 Alex Deucher 提交于
We need to allocate a large enough buffer for the feedback buffer, otherwise the IB test can overwrite other memory. Reviewed-by: NJames Zhu <James.Zhu@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
We need to drop normal and userptr BOs separately. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
When we allocate new page tables under memory pressure we should not evict old ones. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Philip Yang 提交于
user_pages array should always be freed after validation regardless if user pages are changed after bo is created because with HMM change parse bo always allocate user pages array to get user pages for userptr bo. v2: remove unused local variable and amend commit v3: add back get user pages in gem_userptr_ioctl, to detect application bug where an userptr VMA is not ananymous memory and reject it. Bugzilla: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1844962Signed-off-by: NPhilip Yang <Philip.Yang@amd.com> Tested-by: NJoe Barnett <thejoe@gmail.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.3
-
由 Alex Deucher 提交于
We need to allocate a large enough buffer for the session info, otherwise the IB test can overwrite other memory. - Session info is 128K according to mesa - Use the same session info for create and destroy Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204241Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NJames Zhu <James.Zhu@amd.com> Tested-by: NJames Zhu <James.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-