Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Version 3 cap import message includes the ID of the exported
caps. It allow us to remove the exported caps if we still haven't
received the corresponding cap export message.

We remove the exported caps because they are stale, keeping them
can compromise consistence.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Some inodes in readdir reply may have no caps. Getattr mds request
for these inodes can return -ESTALE. The fix is consider dentry that
links to inode with no caps as invalid. Invalid dentry causes a
lookup request to send to the mds, the MDS will send caps back.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Send requests that operate on path to directory's auth MDS if
mode == USE_AUTH_MDS. Always retry using the auth MDS if got
-ESTALE reply from non-auth MDS. Also clean up the code that
handles auth MDS change.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

- don't trim auth cap if there are flusing caps
- don't trim auth cap if any 'write' cap is wanted
- allow trimming non-auth cap even if the inode is dirty
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

handle following sequence of events:

- non-auth MDS revokes Fc cap. queue invalidate work
- auth MDS issues Fc cap through request reply. i_rdcache_gen gets
  increased.
- invalidate work runs. it finds i_rdcache_revoking != i_rdcache_gen,
  so it does nothing.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

auth cap may change after releasing the i_ceph_lock
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

"disconnected" is too easily confused with "DCACHE_DISCONNECTED".  I
think "unhashed" is the more precise term here.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Reviewed-by: NSage Weil <sage@inktank.com>

The check that makes sure that we have enough memory allocated to read
in the entire header of the message in question is currently busted.
It compares front_len of the incoming message with iov_len field of
ceph_msg::front structure, which is used primarily to indicate the
amount of data already read in, and not the size of the allocated
buffer.  Under certain conditions (e.g. a short read from a socket
followed by that socket's shutdown and owning ceph_connection reset)
this results in a warning similar to

[85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0)

and, through another bug, leads to forever hung tasks and forced
reboots.  Fix this by comparing front_len with front_alloc_len field of
struct ceph_msg, which stores the actual size of the buffer.

Fixes: http://tracker.ceph.com/issues/5425Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Rename front local variable to front_len in get_reply() to make its
purpose more clear.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Rename front_max field of struct ceph_msg to front_alloc_len to make
its purpose more clear.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Similar to userspace, don't bail with "parse_ips bad ip ..." if the
specified port is port 0, instead use port CEPH_MON_PORT (6789, the
default monitor port).
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Add CRUSH_V2 feature (new indep mode and SET_* steps) to a set of
features supported by default.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit 8b38f10bc2ee3643a33ea5f9545ad5c00e4ac5b4.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit ea3a0bb8b773360d73b8b77fa32115ef091c9857.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

This allows all of the tunables to be overridden by a specific rule.

Reflects ceph.git commits d129e09e57fbc61cfd4f492e3ee77d0750c9d292,
                          0497db49e5973b50df26251ed0e3f4ac7578e66e.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

The legacy behavior is to make the normal number of tries for the
recursive chooseleaf call.  The descend_once tunable changed this to
making a single try and bail if we get a reject (note that it is
impossible to collide in the recursive case).

The new set_chooseleaf_tries lets you select the number of recursive
chooseleaf attempts for indep mode, or default to 1.  Use the same
behavior for firstn, except default to total_tries when the legacy
tunables are set (for compatibility).  This makes the rule step
override the (new) default of 1 recursive attempt, keeping behavior
consistent with indep mode.

Reflects ceph.git commit 685c6950ef3df325ef04ce7c986e36ca2514c5f1.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

This aligns the internal identifier names with the user-visible names in
the decompiled crush map language.

Reflects ceph.git commit caa0e22e15e4226c3671318ba1f61314bf6da2a6.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Since we can specify the recursive retries in a rule, we may as well also
specify the non-recursive tries too for completeness.

Reflects ceph.git commit d1b97462cffccc871914859eaee562f2786abfd1.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Parameterize the attempts for the _firstn choose method, and apply the
rule-specified tries count to firstn mode as well.  Note that we have
slightly different behavior here than with indep:

 If the firstn value is not specified for firstn, we pass through the
 normal attempt count.  This maintains compatibility with legacy behavior.
 Note that this is usually *not* actually N^2 work, though, because of the
 descend_once tunable.  However, descend_once is unfortunately *not* the
 same thing as 1 chooseleaf try because it is only checked on a reject but
 not on a collision.  Sigh.

 In contrast, for indep, if tries is not specified we default to 1
 recursive attempt, because that is simply more sane, and we have the
 option to do so.  The descend_once tunable has no effect for indep.

Reflects ceph.git commit 64aeded50d80942d66a5ec7b604ff2fcbf5d7b63.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Explicitly control the number of sample attempts, and allow the number of
tries in the recursive call to be explicitly controlled via the rule. This
is important because the amount of time we want to spend looking for a
solution may be rule dependent (e.g., higher for the wide indep pool than
the rep pools).

(We should do the same for the other tunables, by the way!)

Reflects ceph.git commit c43c893be872f709c787bc57f46c0e97876ff681.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Pass down the parent's 'r' value so that we will sample different values in
the recursive call when the parent tries multiple times.  This avoids doing
useless work (calling multiple times and trying the same values).

Reflects ceph.git commit 2731d3030d7a3e80922b7f1b7756f9a4a124bac5.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Pass numrep (the width of the result) separately from the number of results
we want *this* iteration.  This makes things less awkward when we do a
recursive call (for chooseleaf) and want only one item.

Reflects ceph.git commit 1b567ee08972f268c11b43fc881e57b5984dd08b.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Now that indep is handled by crush_choose_indep, rename crush_choose to
crush_choose_firstn and remove all the conditionals.  This ends up
stripping out *lots* of code.

Note that it *also* makes it obvious that the shenanigans we were playing
with r' for uniform buckets were broken for firstn mode.  This appears to
have happened waaaay back in commit dae8bec9 (or earlier)... 2007.

Reflects ceph.git commit 94350996cb2035850bcbece6a77a9b0394177ec9.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit 4551fee9ad89d0427ed865d766d0d44004d3e3e1.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit 86e978036a4ecbac4c875e7c00f6c5bbe37282d3.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

For firstn mode, if we fail to make a valid placement choice, we just
continue and return a short result to the caller.  For indep mode, however,
we need to make the position stable, and return an undefined value on
failed placements to avoid shifting later results to the left.

Reflects ceph.git commit b1d4dd4eb044875874a1d01c01c7d766db5d0a80.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

This is only present to size the temporary scratch arrays that we put on
the stack.  Let the caller allocate them as they wish and remove the
limitation.

Reflects ceph.git commit 1cfe140bf2dab99517589a82a916f4c75b9492d1.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit 3cef755428761f2481b1dd0e0fbd0464ac483fc5.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit e7d47827f0333c96ad43d257607fb92ed4176550.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit 43a01c9973c4b83f2eaa98be87429941a227ddde.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Pass the size of the weight vector into crush_do_rule() to ensure that we
don't access values past the end.  This can happen if the caller misbehaves
and passes a weight vector that is smaller than max_devices.

Currently the monitor tries to prevent that from happening, but this will
gracefully tolerate previous bad osdmaps that got into this state.  It's
also a bit more defensive.

Reflects ceph.git commit 5922e2c2b8335b5e46c9504349c3a55b7434c01a.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

This updates ceph_features.h so that it has all feature bits defined in
ceph.git.  In the interim since the last update, ceph.git crossed the
"32 feature bits" point, and, the addition of the 33rd bit wasn't
handled correctly.  The work-around is squashed into this commit and
reflects ceph.git commit 053659d05e0349053ef703b414f44965f368b9f0.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In preparation for ceph_features.h update, change all features fields
from unsigned int/u32 to u64.  (ceph.git has ~40 feature bits at this
point.)
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Tear down watch request if rbd_dev_device_setup() fails.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Rename rbd_dev_header_watch_sync() to __rbd_dev_header_watch_sync() and
introduce two helpers: rbd_dev_header_{,un}watch_sync() to make it more
clear what is going on.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

I no longer have direct access to my Inktank e-mail.  I still pay
attention to rbd, so update its entry in MAINTAINERS accordingly.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NSage Weil <sage@inktank.com>

If single-major device number allocation scheme is turned on, instead
of reserving 256 minors per device, which imposes a limit of 4096
images mapped at once, reserve 16 minors per device and enable extended
devt feature.  This results in a theoretical limit of 65536 images
mapped at once, and still allows to have more than 15 partititions:
partitions starting with 16th are mapped under major 259 (Block
Extended Major):

$ rbd showmapped
id pool image snap device
0  rbd  b5    -    /dev/rbd0    # no partitions
1  rbd  b2    -    /dev/rbd1    # 40 partitions
2  rbd  b3    -    /dev/rbd2    #  2 partitions

$ cat /proc/partitions
 251        0       1024 rbd0
 251       16       1024 rbd1
 251       17          0 rbd1p1
 251       18          0 rbd1p2
 ...
 251       30          0 rbd1p14
 251       31          0 rbd1p15
 259        0          0 rbd1p16
 259        1          0 rbd1p17
 ...
 259       23          0 rbd1p39
 259       24          0 rbd1p40
 251       32       1024 rbd2
 251       33          0 rbd2p1
 251       34          0 rbd2p2

(major 251 was assigned dynamically at module load time)
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>