- 20 4月, 2009 1 次提交
-
-
由 Karsten Wiese 提交于
Use it to clean up snd_us122l_card_used[]. Without patch unplugging of an US122L soundcard didn't reset the corresponding element of snd_us122l_card_used[] to 0. The (SNDRV_CARDS + 1)th plugging in did not result in creating the soundcard device anymore. Index values supplied with the modprobe command line were not used correctly anymore after the first unplugging of an US122L. Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de> Cc: stable@kernel.org Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 4月, 2009 1 次提交
-
-
由 Karsten Wiese 提交于
Within 2.6.30's mergewindow, struct urb's transfer_buffer_length has become unsigned. This changed an "int > int" comparision to an "unsigned > int" one in snd_usb_122l. Fix this by using a local int variable instead of urb->transfer_buffer_length in comparisions. Shorten playback_prep_freqn() a bit and tweak error-paths in usb_stream_prepare_playback(). Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 2月, 2009 2 次提交
-
-
由 Hannes Eder 提交于
Fix this sparse warning: sound/usb/usx2y/usbusx2y.c:231:33: warning: do-while statement is not a compound statement Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hannes Eder 提交于
Impact: Move declaration to header file. Fix this sparse warning: sound/usb/usx2y/usx2yhwdeppcm.c:739:5: warning: symbol 'usX2Y_hwdep_pcm_new' was not declared. Should it be static? Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 2月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Remove NOP hwdep ops in sound drivers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 1月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Some drivers in soudn/usb/* don't handle the error code properly from snd_card_create(). This patch fixes these places. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Convert from snd_card_new() to the new snd_card_create() function in other sound subdirectories. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 1月, 2009 1 次提交
-
-
由 Frederik Schwarzer 提交于
- (better, more, bigger ...) then -> (...) than Signed-off-by: NFrederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 02 1月, 2009 1 次提交
-
-
由 Julia Lawall 提交于
Use the USB functions usb_get_intfdata and usb_set_intfdata instead of dev_get_drvdata and dev_set_drvdata, respectively. The semantic patch that makes this change for the usb_get_intfdata case is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @header@ @@ #include <linux/usb.h> @same depends on header@ position p; @@ usb_get_intfdata@p(...) { ... } @depends on header@ position _p!=same.p; identifier _f; struct usb_interface*intf; @@ _f@_p(...) { <+... - dev_get_drvdata(&intf->dev) + usb_get_intfdata(intf) ...+> } // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 12月, 2008 1 次提交
-
-
由 Roel Kluin 提交于
Sparse asked whether these could be static. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 10月, 2008 1 次提交
-
-
由 Li Zefan 提交于
Should unlock us122l->mutex before returning VM_FAULT_SIGBUS. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 8月, 2008 1 次提交
-
-
由 Karsten Wiese 提交于
Added a new US122L usb-audio driver. This driver works together with a dedicated alsa-lib plugin. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 04 2月, 2008 1 次提交
-
-
由 Nick Piggin 提交于
Drivers that register a ->fault handler, but do not range-check the offset argument, must set VM_DONTEXPAND in the vm_flags in order to prevent an expanding mremap from overflowing the resource. I've audited the tree and attempted to fix these problems (usually by adding VM_DONTEXPAND where it is not obvious). Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 2月, 2008 2 次提交
-
-
由 Takashi Iwai 提交于
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Nick Piggin 提交于
Convert alsa usx2y driver from nopage to fault. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 20 7月, 2007 1 次提交
-
-
由 Richard Knutsson 提交于
if (!x) kfree(x); is not needed since kfree(NULL) is valid. Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 23 1月, 2007 1 次提交
-
-
由 Karsten Wiese 提交于
The previous patch 'Repair snd-usb-usx2y for usb 2.6.18' assumed urb->start_frame roll over beyond MAX_INT for both UHCI & OHCI. This isn't true until now (kernel 2.6.20). Fix this by only looking at the common between OHCI & UHCI Frame number range. This is for mainline and stable kernels >= 2.6.18. Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 08 12月, 2006 1 次提交
-
-
由 Nick Piggin 提交于
Some drivers are returning OOM when it is not in response to a memory shortage. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Dave Airlie <airlied@linux.ie> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 10月, 2006 2 次提交
-
-
由 Karsten Wiese 提交于
urb->start_frame rolls over beyond MAX_INT now. This is for stable kernel and stable alsa. Signed-off-by: NKarsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Karsten Wiese 提交于
Fix bug in snd-usb-usx2y's usX2Y_pcms_lock_check() substream can be NULL...... in mainline, bug was introduced by: 2006-06-22 [ALSA] Add O_APPEND flag support to PCM Signed-off-by: NKarsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 23 6月, 2006 1 次提交
-
-
由 Takashi Iwai 提交于
Added O_APPEND flag support to PCM to enable shared substreams among multiple processes. This mechanism is used by dmix and dsnoop plugins. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 3月, 2006 1 次提交
-
-
由 Alexey Dobriyan 提交于
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 3月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 1月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
It is no longer needed, so let's remove it, saving a bit of memory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 1月, 2006 3 次提交
-
-
由 Takashi Iwai 提交于
Modules: USB USX2Y Remove xxx_t typedefs from the USB-USX2Y driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: USB USX2Y Clean up snd-usb-usx2y driver code: - Avoid unnecessary cast - Fix spaces/indents - Use kzalloc() - Remove weird debug prints Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Remove superflous pcm_free callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 11月, 2005 1 次提交
-
-
由 Hugh Dickins 提交于
Something noticed when studying use of VM_RESERVED in different drivers: snd_usX2Y_hwdep_pcm_vm_nopage omitted to get_page: fixed. And how did this work before? Aargh! That nopage is returning a page from within a buffer allocated by snd_malloc_pages, which allocates a high-order page, then does SetPageReserved on each 0-order page within. That would have worked in 2.6.14, because when the area was unmapped, PageReserved inhibited put_page. 2.6.15-rc1 removed that inhibition (while leaving ineffective PageReserveds around for now), but it hasn't caused trouble because.. we've not been freeing from VM_RESERVED at all. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 11月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
Modules: ALSA<-OSS emulation,USB generic driver,USB USX2Y Added missing KERN_* prefix to printk. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 9月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
Documentation,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,OPL3 OPL4,Digigram VX core,I2C cs8427,I2C lib core,I2C tea6330t,L3 drivers AK4114 receiver,AK4117 receiver,PDAudioCF driver,PPC PMAC driver SPARC AMD7930 driver,SPARC cs4231 driver,Synth,Common EMU synth USB generic driver,USB USX2Y Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 8月, 2005 1 次提交
-
-
由 Karsten Wiese 提交于
PCM Midlevel,ALSA<-OSS emulation,USB USX2Y This patch removes open_flag from struct _snd_pcm_substream. All of its uses are substituted by querying struct _snd_pcm_substream's member ffile instead. Signed-off-by: NKarsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 7月, 2005 1 次提交
-
-
由 Nishanth Aravamudan 提交于
USB generic driver,USB USX2Y Description: Fix-up sleeping in sound/usb. Replace big_mdelay() with msleep() to guarantee the task delays as expected. This also involved replacing/removing custom sleep functions. Patch is compile-tested. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 22 6月, 2005 1 次提交
-
-
由 Jesper Juhl 提交于
Timer Midlevel,ALSA sequencer,ALSA<-OSS sequencer,Digigram VX core I2C tea6330t,GUS Library,VIA82xx driver,VIA82xx-modem driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,YMFPCI driver Digigram VX Pocket driver,Common EMU synth,USB generic driver,USB USX2Y Checking a pointer for NULL before calling kfree() on it is redundant, kfree() deals with NULL pointers just fine. This patch removes such checks from sound/ This patch also makes another, but closely related, change. It avoids casting pointers about to be kfree()'ed. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 6月, 2005 1 次提交
-
-
由 Karsten Wiese 提交于
Without this patch, some usb kobjects, which are parents to the usx2y's kobjects can be freed before the usx2y's. This led to an oops in get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects were freed. The patch ensures the correct sequence. Tested ok on kernel 2.6.12-rc2. Present in ALSA cvs Signed-off-by: NKarsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NChris Wright <chrisw@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 5月, 2005 2 次提交
-
-
由 Clemens Ladisch 提交于
USB generic driver,USB USX2Y This patch removes the superfluous driver parameter from the disconnect functions. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Karsten Wiese 提交于
USB generic driver,USB USX2Y Without this patch, some usb kobjects, which are parents to the usx2y's kobjects can be freed before the usx2y's. This led to an oops in get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects were freed. The patch ensures the correct sequence. Tested ok on kernel 2.6.12-rc2. Signed-off-by: NKarsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-