- 26 10月, 2013 1 次提交
-
-
由 Nishanth Menon 提交于
Since Operating Performance Points (OPP) functions are specific to device specific power management, be specific and rename opp_* accessors in OPP library with dev_pm_opp_* equivalent. Affected functions are: opp_get_voltage opp_get_freq opp_get_opp_count opp_find_freq_exact opp_find_freq_floor opp_find_freq_ceil opp_add opp_enable opp_disable opp_get_notifier opp_init_cpufreq_table opp_free_cpufreq_table Reported-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NNishanth Menon <nm@ti.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 20 10月, 2013 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 19 10月, 2013 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fix from Chris Mason: "Sage hit a deadlock with ceph on btrfs, and Josef tracked it down to a regression in our initial rc1 pull. When doing nocow writes we were sometimes starting a transaction with locks held" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: release path before starting transaction in can_nocow_extent
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: - intel_pstate fix for misbehavior after system resume if sysfs attributes are set in a specific way before the corresponding suspend from Dirk Brandewie. - A recent intel_pstate fix has no effect if unsigned long is 32-bit, so fix it up to cover that case as well. - The s3c64xx cpufreq driver was not updated when the index field of struct cpufreq_frequency_table was replaced with driver_data, so update it now. From Charles Keepax. - The Kconfig help text for ACPI_BUTTON still refers to /proc/acpi/event that has been dropped recently, so modify it to remove that reference. From Krzysztof Mazur. - A Lan Tianyu's change adds a missing mutex unlock to an error code path in acpi_resume_power_resources(). - Some code related to ACPI power resources, whose very purpose is questionable to put it lightly, turns out to cause problems to happen during testing on real systems, so remove it completely (we may revisit that in the future if there's a compelling enough reason). From Rafael J Wysocki and Aaron Lu. * tag 'pm+acpi-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Drop two functions that are not used any more ATA / ACPI: remove power dependent device handling cpufreq: s3c64xx: Rename index to driver_data ACPI / power: Drop automaitc resume of power resource dependent devices intel_pstate: Fix type mismatch warning cpufreq / intel_pstate: Fix max_perf_pct on resume ACPI: remove /proc/acpi/event from ACPI_BUTTON help ACPI / power: Release resource_lock after acpi_power_get_state() return error
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Two fixlets: - fix a (rare-config) build bug - fix a next-gen SGI/UV hw/firmware enumeration bug" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Update UV3 hub revision ID x86/microcode: Correct Kconfig dependencies
-
由 Josef Bacik 提交于
We can't be holding tree locks while we try to start a transaction, we will deadlock. Thanks, Reported-by: NSage Weil <sage@inktank.com> Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
- 18 10月, 2013 12 次提交
-
-
由 Rafael J. Wysocki 提交于
* acpi-fixes: ACPI / PM: Drop two functions that are not used any more ATA / ACPI: remove power dependent device handling ACPI / power: Drop automaitc resume of power resource dependent devices ACPI: remove /proc/acpi/event from ACPI_BUTTON help ACPI / power: Release resource_lock after acpi_power_get_state() return error
-
由 Rafael J. Wysocki 提交于
* pm-fixes: cpufreq: s3c64xx: Rename index to driver_data intel_pstate: Fix type mismatch warning cpufreq / intel_pstate: Fix max_perf_pct on resume
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French: "Five small cifs fixes (includes fixes for: unmount hang, 2 security related, symlink, large file writes)" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: cifs: ntstatus_to_dos_map[] is not terminated cifs: Allow LANMAN auth method for servers supporting unencapsulated authentication methods cifs: Fix inability to write files >2GB to SMB2/3 shares cifs: Avoid umount hangs with smb2 when server is unresponsive do not treat non-symlink reparse points as valid symlinks
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is one fix for the hotplug memory path that resolves a regression when removing memory that showed up in 3.12-rc1" * tag 'driver-core-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Release device_hotplug_lock when store_mem_state returns EINVAL
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 3.12-rc6 The largest change here is a bunch of new device ids for the option USB serial driver for new Huawei devices. Other than that, just some small bug fixes for issues that people have reported (run-time and build-time), nothing major" * tag 'usb-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: usb_phy_gen: refine conditional declaration of usb_nop_xceiv_register usb: misc: usb3503: Fix compile error due to incorrect regmap depedency usb/chipidea: fix oops on memory allocation failure usb-storage: add quirk for mandatory READ_CAPACITY_16 usb: serial: option: blacklist Olivetti Olicard200 USB: quirks: add touchscreen that is dazzeled by remote wakeup Revert "usb: musb: gadget: fix otg active status flag" USB: quirks.c: add one device that cannot deal with suspension USB: serial: option: add support for Inovia SEW858 device USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well. USB: support new huawei devices in option.c usb: musb: start musb on the udc side, too xhci: Fix spurious wakeups after S5 on Haswell xhci: fix write to USB3_PSSEN and XUSB2PRM pci config registers xhci: quirk for extra long delay for S4 xhci: Don't enable/disable RWE on bus suspend/resume.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull serial driver fixes from Greg KH: "Here are two serial driver fixes for your tree. One is a revert of a patch that causes a build error, the other is a fix to provide the correct brace placement which resolves a bug where the driver was not working properly" * tag 'tty-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: vt8500: add missing braces Revert "serial: i.MX: evaluate linux,stdout-path property"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are some small iio and w1 driver fixes for 3.12-rc6. There is also a hyper-v fix in here, which turned out to be incorrect, so it was reverted. That will probably have to wait unto 3.13-rc1 to get accepted as it's still being discussed" * tag 'char-misc-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "Drivers: hv: vmbus: Fix a bug in channel rescind code" Drivers: hv: vmbus: Fix a bug in channel rescind code iio:buffer: Free active scan mask in iio_disable_all_buffers() iio: frequency: adf4350: add missing clk_disable_unprepare() on error in adf4350_probe() w1 - call request_module with w1 master mutex unlocked w1 - fix fops in w1_bus_notify
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "All reasonably small fixes as rc6: a HD-audio mic fix, a us122l mmap regression fix, and kernel memory leak fix in hdsp driver. Hopefully this will be the last pull request for 3.12..." * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hdsp - info leak in snd_hdsp_hwdep_ioctl() ALSA: us122l: Fix pcm_usb_stream mmapping regression ALSA: hda - Fix inverted internal mic not indicated on some machines
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull apparmor fixes from James Morris: "A couple more regressions fixed" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: apparmor: fix bad lock balance when introspecting policy apparmor: fix memleak of the profile hash
-
由 Greg Kroah-Hartman 提交于
Merge tag 'iio-fixes-for-3.12c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: Third set of IIO fixes for the 3.12 cycle. Two little ones this time: 1) A missing clk_unprepare in adf4350. 2) A missing free of the active_scan_mask when iio_disable_all_buffers is called during an unexpected device removal. This leak was introduced by the fix a87c82e4 iio: Stop sampling when the device is removed and hence is a regression fix.
-
由 Guenter Roeck 提交于
Commit 3fa4d734 (usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv) changed the conditional around the declaration of usb_nop_xceiv_register from #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) to #if IS_ENABLED(CONFIG_NOP_USB_XCEIV) While that looks the same, it is semantically different. The first expression is true if CONFIG_NOP_USB_XCEIV is built as module and if the including code is built as module. The second expression is true if code depending on CONFIG_NOP_USB_XCEIV if built as module or into the kernel. As a result, the arm:allmodconfig build fails with arch/arm/mach-omap2/built-in.o: In function `omap3_evm_init': arch/arm/mach-omap2/board-omap3evm.c:703: undefined reference to `usb_nop_xceiv_register' Fix the problem by reverting to the old conditional. Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 90d33f3e as it's not the correct fix for this issue, and it causes a build warning to be added to the kernel tree. Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 10月, 2013 22 次提交
-
-
由 Rafael J. Wysocki 提交于
Two functions defined in device_pm.c, acpi_dev_pm_add_dependent() and acpi_dev_pm_remove_dependent(), have no callers and may be dropped, so drop them. Moreover, they are the only functions adding entries to and removing entries from the power_dependent list in struct acpi_device, so drop that list too. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Aaron Lu 提交于
Previously, we wanted SCSI devices corrsponding to ATA devices to be runtime resumed when the power resource for those ATA device was turned on by some other device, so we added the SCSI device to the dependent device list of the ATA device's ACPI node. However, this code has no effect after commit 41863fce (ACPI / power: Drop automaitc resume of power resource dependent devices) and the mechanism it was supposed to implement is regarded as a bad idea now, so drop it. [rjw: Changelog] Signed-off-by: NAaron Lu <aaron.lu@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits) mm: revert mremap pud_free anti-fix mm: fix BUG in __split_huge_page_pmd swap: fix set_blocksize race during swapon/swapoff procfs: call default get_unmapped_area on MMU-present architectures procfs: fix unintended truncation of returned mapped address writeback: fix negative bdi max pause percpu_refcount: export symbols fs: buffer: move allocation failure loop into the allocator mm: memcg: handle non-error OOM situations more gracefully tools/testing/selftests: fix uninitialized variable block/partitions/efi.c: treat size mismatch as a warning, not an error mm: hugetlb: initialize PG_reserved for tail pages of gigantic compound pages mm/zswap: bugfix: memory leak when re-swapon mm: /proc/pid/pagemap: inspect _PAGE_SOFT_DIRTY only on present pages mm: migration: do not lose soft dirty bit if page is in migration state gcov: MAINTAINERS: Add an entry for gcov mm/hugetlb.c: correct missing private flag clearing mm/vmscan.c: don't forget to free shrinker->nr_deferred ipc/sem.c: synchronize semop and semctl with IPC_RMID ipc: update locking scheme comments ...
-
由 Hugh Dickins 提交于
Revert commit 1ecfd533 ("mm/mremap.c: call pud_free() after fail calling pmd_alloc()"). The original code was correct: pud_alloc(), pmd_alloc(), pte_alloc_map() ensure that the pud, pmd, pt is already allocated, and seldom do they need to allocate; on failure, upper levels are freed if appropriate by the subsequent do_munmap(). Whereas commit 1ecfd533 did an unconditional pud_free() of a most-likely still-in-use pud: saved only by the near-impossiblity of pmd_alloc() failing. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Chen Gang <gang.chen@asianux.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Occasionally we hit the BUG_ON(pmd_trans_huge(*pmd)) at the end of __split_huge_page_pmd(): seen when doing madvise(,,MADV_DONTNEED). It's invalid: we don't always have down_write of mmap_sem there: a racing do_huge_pmd_wp_page() might have copied-on-write to another huge page before our split_huge_page() got the anon_vma lock. Forget the BUG_ON, just go back and try again if this happens. Signed-off-by: NHugh Dickins <hughd@google.com> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Krzysztof Kozlowski 提交于
Fix race between swapoff and swapon. Swapoff used old_block_size from swap_info outside of swapon_mutex so it could be overwritten by concurrent swapon. The race has visible effect only if more than one swap block device exists with different block sizes (e.g. /dev/sda1 with block size 4096 and /dev/sdb1 with 512). In such case it leads to setting the blocksize of swapped off device with wrong blocksize. The bug can be triggered with multiple concurrent swapoff and swapon: 0. Swap for some device is on. 1. swapoff: First the swapoff is called on this device and "struct swap_info_struct *p" is assigned. This is done under swap_lock however this lock is released for the call try_to_unuse(). 2. swapon: After the assignment above (and before acquiring swapon_mutex & swap_lock by swapoff) the swapon is called on the same device. The p->old_block_size is assigned to the value of block_size the device. This block size should be the same as previous but sometimes it is not. The swapon ends successfully. 3. swapoff: Swapoff resumes, grabs the locks and mutex and continues to disable this swap device. Now it sets the block size to value taken from swap_info which was overwritten by swapon in 2. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: NWeijie Yang <weijie.yang.kh@gmail.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Shaohua Li <shli@fusionio.com> Cc: Minchan Kim <minchan@kernel.org> Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 HATAYAMA Daisuke 提交于
Commit c4fe2448 ("sparc: fix PCI device proc file mmap(2)") added proc_reg_get_unmapped_area in proc_reg_file_ops and proc_reg_file_ops_no_compat, by which now mmap always returns EIO if get_unmapped_area method is not defined for the target procfs file, which causes regression of mmap on /proc/vmcore. To address this issue, like get_unmapped_area(), call default current->mm->get_unmapped_area on MMU-present architectures if pde->proc_fops->get_unmapped_area, i.e. the one in actual file operation in the procfs file, is not defined. Reported-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NHATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: David S. Miller <davem@davemloft.net> Tested-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 HATAYAMA Daisuke 提交于
Currently, proc_reg_get_unmapped_area truncates upper 32-bit of the mapped virtual address returned from get_unmapped_area method in pde->proc_fops due to the variable rv of signed integer on x86_64. This is too small to have vitual address of unsigned long on x86_64 since on x86_64, signed integer is of 4 bytes while unsigned long is of 8 bytes. To fix this issue, use unsigned long instead. Fixes a regression added in commit c4fe2448 ("sparc: fix PCI device proc file mmap(2)"). Signed-off-by: NHATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: David S. Miller <davem@davemloft.net> Tested-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fengguang Wu 提交于
Toralf runs trinity on UML/i386. After some time it hangs and the last message line is BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child0:1521] It's found that pages_dirtied becomes very large. More than 1000000000 pages in this case: period = HZ * pages_dirtied / task_ratelimit; BUG_ON(pages_dirtied > 2000000000); BUG_ON(pages_dirtied > 1000000000); <--------- UML debug printf shows that we got negative pause here: ick: pause : -984 ick: pages_dirtied : 0 ick: task_ratelimit: 0 pause: + if (pause < 0) { + extern int printf(char *, ...); + printf("ick : pause : %li\n", pause); + printf("ick: pages_dirtied : %lu\n", pages_dirtied); + printf("ick: task_ratelimit: %lu\n", task_ratelimit); + BUG_ON(1); + } trace_balance_dirty_pages(bdi, Since pause is bounded by [min_pause, max_pause] where min_pause is also bounded by max_pause. It's suspected and demonstrated that the max_pause calculation goes wrong: ick: pause : -717 ick: min_pause : -177 ick: max_pause : -717 ick: pages_dirtied : 14 ick: task_ratelimit: 0 The problem lies in the two "long = unsigned long" assignments in bdi_max_pause() which might go negative if the highest bit is 1, and the min_t(long, ...) check failed to protect it falling under 0. Fix all of them by using "unsigned long" throughout the function. Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Reported-by: NToralf Förster <toralf.foerster@gmx.de> Tested-by: NToralf Förster <toralf.foerster@gmx.de> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Richard Weinberger <richard@nod.at> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matias Bjorling 提交于
Export the interface to be used within modules. Signed-off-by: NMatias Bjorling <m@bjorling.me> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Buffer allocation has a very crude indefinite loop around waking the flusher threads and performing global NOFS direct reclaim because it can not handle allocation failures. The most immediate problem with this is that the allocation may fail due to a memory cgroup limit, where flushers + direct reclaim might not make any progress towards resolving the situation at all. Because unlike the global case, a memory cgroup may not have any cache at all, only anonymous pages but no swap. This situation will lead to a reclaim livelock with insane IO from waking the flushers and thrashing unrelated filesystem cache in a tight loop. Use __GFP_NOFAIL allocations for buffers for now. This makes sure that any looping happens in the page allocator, which knows how to orchestrate kswapd, direct reclaim, and the flushers sensibly. It also allows memory cgroups to detect allocations that can't handle failure and will allow them to ultimately bypass the limit if reclaim can not make progress. Reported-by: NazurIt <azurit@pobox.sk> Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Commit 3812c8c8 ("mm: memcg: do not trap chargers with full callstack on OOM") assumed that only a few places that can trigger a memcg OOM situation do not return VM_FAULT_OOM, like optional page cache readahead. But there are many more and it's impractical to annotate them all. First of all, we don't want to invoke the OOM killer when the failed allocation is gracefully handled, so defer the actual kill to the end of the fault handling as well. This simplifies the code quite a bit for added bonus. Second, since a failed allocation might not be the abrupt end of the fault, the memcg OOM handler needs to be re-entrant until the fault finishes for subsequent allocation attempts. If an allocation is attempted after the task already OOMed, allow it to bypass the limit so that it can quickly finish the fault and invoke the OOM killer. Reported-by: NazurIt <azurit@pobox.sk> Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Felipe Pena 提交于
The err variable is intended to receive the timer_create() return before checking it Signed-off-by: NFelipe Pena <felipensp@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Doug Anderson 提交于
In commit 27a7c642 ("partitions/efi: account for pmbr size in lba") we started treating bad sizes in lba field of the partition that has the 0xEE (GPT protective) as errors. However, we may run into these "bad sizes" in the real world if someone uses dd to copy an image from a smaller disk to a bigger disk. Since this case used to work (even without using force_gpt), keep it working and treat the size mismatch as a warning instead of an error. Reported-by: NJosh Triplett <josh@joshtriplett.org> Reported-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDoug Anderson <dianders@chromium.org> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NDavidlohr Bueso <davidlohr@hp.com> Tested-by: NArtem Bityutskiy <dedekind1@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
Commit 11feeb49 ("kvm: optimize away THP checks in kvm_is_mmio_pfn()") introduced a memory leak when KVM is run on gigantic compound pages. That commit depends on the assumption that PG_reserved is identical for all head and tail pages of a compound page. So that if get_user_pages returns a tail page, we don't need to check the head page in order to know if we deal with a reserved page that requires different refcounting. The assumption that PG_reserved is the same for head and tail pages is certainly correct for THP and regular hugepages, but gigantic hugepages allocated through bootmem don't clear the PG_reserved on the tail pages (the clearing of PG_reserved is done later only if the gigantic hugepage is freed). This patch corrects the gigantic compound page initialization so that we can retain the optimization in 11feeb49. The cacheline was already modified in order to set PG_tail so this won't affect the boot time of large memory systems. [akpm@linux-foundation.org: tweak comment layout and grammar] Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Reported-by: Nandy123 <ajs124.ajs124@gmail.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Acked-by: NRafael Aquini <aquini@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Weijie Yang 提交于
zswap_tree is not freed when swapoff, and it got re-kmalloced in swapon, so a memory leak occurs. Free the memory of zswap_tree in zswap_frontswap_invalidate_area(). Signed-off-by: NWeijie Yang <weijie.yang@samsung.com> Reviewed-by: NBob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Reviewed-by: NMinchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> From: Weijie Yang <weijie.yang@samsung.com> Subject: mm/zswap: bugfix: memory leak when invalidate and reclaim occur concurrently Consider the following scenario: thread 0: reclaim entry x (get refcount, but not call zswap_get_swap_cache_page) thread 1: call zswap_frontswap_invalidate_page to invalidate entry x. finished, entry x and its zbud is not freed as its refcount != 0 now, the swap_map[x] = 0 thread 0: now call zswap_get_swap_cache_page swapcache_prepare return -ENOENT because entry x is not used any more zswap_get_swap_cache_page return ZSWAP_SWAPCACHE_NOMEM zswap_writeback_entry do nothing except put refcount Now, the memory of zswap_entry x and its zpage leak. Modify: - check the refcount in fail path, free memory if it is not referenced. - use ZSWAP_SWAPCACHE_FAIL instead of ZSWAP_SWAPCACHE_NOMEM as the fail path can be not only caused by nomem but also by invalidate. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NWeijie Yang <weijie.yang@samsung.com> Reviewed-by: NBob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Acked-by: NSeth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
If a page we are inspecting is in swap we may occasionally report it as having soft dirty bit (even if it is clean). The pte_soft_dirty helper should be called on present pte only. Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
If page migration is turned on in config and the page is migrating, we may lose the soft dirty bit. If fork and mprotect are called on migrating pages (once migration is complete) pages do not obtain the soft dirty bit in the correspond pte entries. Fix it adding an appropriate test on swap entries. Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Oberparleiter 提交于
Signed-off-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
We should clear the page's private flag when returing the page to the hugepage pool. Otherwise, marked hugepage can be allocated to the user who tries to allocate the non-reserved hugepage. If this user fail to map this hugepage, he would try to return the page to the hugepage pool. Since this page has a private flag, resv_huge_pages would mistakenly increase. This patch fixes this situation. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Hillf Danton <dhillf@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Vagin 提交于
This leak was added by commit 1d3d4437 ("vmscan: per-node deferred work"). unreferenced object 0xffff88006ada3bd0 (size 8): comm "criu", pid 14781, jiffies 4295238251 (age 105.641s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: [<ffffffff8170caee>] kmemleak_alloc+0x5e/0xc0 [<ffffffff811c0527>] __kmalloc+0x247/0x310 [<ffffffff8117848c>] register_shrinker+0x3c/0xa0 [<ffffffff811e115b>] sget+0x5ab/0x670 [<ffffffff812532f4>] proc_mount+0x54/0x170 [<ffffffff811e1893>] mount_fs+0x43/0x1b0 [<ffffffff81202dd2>] vfs_kern_mount+0x72/0x110 [<ffffffff81202e89>] kern_mount_data+0x19/0x30 [<ffffffff812530a0>] pid_ns_prepare_proc+0x20/0x40 [<ffffffff81083c56>] alloc_pid+0x466/0x4a0 [<ffffffff8105aeda>] copy_process+0xc6a/0x1860 [<ffffffff8105beab>] do_fork+0x8b/0x370 [<ffffffff8105c1a6>] SyS_clone+0x16/0x20 [<ffffffff8171f739>] stub_clone+0x69/0x90 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: NAndrew Vagin <avagin@openvz.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Manfred Spraul 提交于
After acquiring the semlock spinlock, operations must test that the array is still valid. - semctl() and exit_sem() would walk stale linked lists (ugly, but should be ok: all lists are empty) - semtimedop() would sleep forever - and if woken up due to a signal - access memory after free. The patch also: - standardizes the tests for .deleted, so that all tests in one function leave the function with the same approach. - unconditionally tests for .deleted immediately after every call to sem_lock - even it it means that for semctl(GETALL), .deleted will be tested twice. Both changes make the review simpler: After every sem_lock, there must be a test of .deleted, followed by a goto to the cleanup code (if the function uses "goto cleanup"). The only exception is semctl_down(): If sem_ids().rwsem is locked, then the presence in ids->ipcs_idr is equivalent to !.deleted, thus no additional test is required. Signed-off-by: NManfred Spraul <manfred@colorfullife.com> Cc: Mike Galbraith <efault@gmx.de> Acked-by: NDavidlohr Bueso <davidlohr@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-