Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 27 9月, 2016 1 次提交
  3. 26 7月, 2016 2 次提交
  5. 08 6月, 2016 2 次提交
  7. 30 5月, 2016 3 次提交
    • F
      Btrfs: fix race setting block group back to RW mode during device replace · 1a1a8b73
      由 Filipe Manana 提交于 
      After it finishes processing a device extent, the device replace code sets
back the block group to RW mode and then after that it sets the left cursor
to match the logical end address of the block group, so that future writes
into extents belonging to the block group go both the source (old) and
target (new) devices. However from the moment we turn the block group
back to RW mode we have a short time window, that lasts until we update
the left cursor's value, where extents can be allocated from the block
group and written to, in which case they will not be copied/written to
the target (new) device. Fix this by updating the left cursor's value
before turning the block group back to RW mode.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      1a1a8b73
    • F
      Btrfs: fix unprotected assignment of the left cursor for device replace · 81e87a73
      由 Filipe Manana 提交于 
      We were assigning new values to fields of the device replace object
without holding the respective lock after processing each device extent.
This is important for the left cursor field which can be accessed by a
concurrent task running __btrfs_map_block (which, correctly, takes the
device replace lock).
So change these fields while holding the device replace lock.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      81e87a73
    • F
      Btrfs: fix race setting block group readonly during device replace · f0e9b7d6
      由 Filipe Manana 提交于 
      When we do a device replace, for each device extent we find from the
source device, we set the corresponding block group to readonly mode to
prevent writes into it from happening while we are copying the device
extent from the source to the target device. However just before we set
the block group to readonly mode some concurrent task might have already
allocated an extent from it or decided it could perform a nocow write
into one of its extents, which can make the device replace process to
miss copying an extent since it uses the extent tree's commit root to
search for extents and only once it finishes searching for all extents
belonging to the block group it does set the left cursor to the logical
end address of the block group - this is a problem if the respective
ordered extents finish while we are searching for extents using the
extent tree's commit root and no transaction commit happens while we
are iterating the tree, since it's the delayed references created by the
ordered extents (when they complete) that insert the extent items into
the extent tree (using the non-commit root of course).
Example:

          CPU 1                                            CPU 2

 btrfs_dev_replace_start()
   btrfs_scrub_dev()
     scrub_enumerate_chunks()
       --> finds device extent belonging
           to block group X

                               <transaction N starts>

                                                      starts buffered write
                                                      against some inode

                                                      writepages is run against
                                                      that inode forcing dellaloc
                                                      to run

                                                      btrfs_writepages()
                                                        extent_writepages()
                                                          extent_write_cache_pages()
                                                            __extent_writepage()
                                                              writepage_delalloc()
                                                                run_delalloc_range()
                                                                  cow_file_range()
                                                                    btrfs_reserve_extent()
                                                                      --> allocates an extent
                                                                          from block group X
                                                                          (which is not yet
                                                                           in RO mode)
                                                                    btrfs_add_ordered_extent()
                                                                      --> creates ordered extent Y
                                                        flush_epd_write_bio()
                                                          --> bio against the extent from
                                                              block group X is submitted

       btrfs_inc_block_group_ro(bg X)
         --> sets block group X to readonly

       scrub_chunk(bg X)
         scrub_stripe(device extent from srcdev)
           --> keeps searching for extent items
               belonging to the block group using
               the extent tree's commit root
           --> it never blocks due to
               fs_info->scrub_pause_req as no
               one tries to commit transaction N
           --> copies all extents found from the
               source device into the target device
           --> finishes search loop

                                                        bio completes

                                                        ordered extent Y completes
                                                        and creates delayed data
                                                        reference which will add an
                                                        extent item to the extent
                                                        tree when run (typically
                                                        at transaction commit time)

                                                          --> so the task doing the
                                                              scrub/device replace
                                                              at CPU 1 misses this
                                                              and does not copy this
                                                              extent into the new/target
                                                              device

       btrfs_dec_block_group_ro(bg X)
         --> turns block group X back to RW mode

       dev_replace->cursor_left is set to the
       logical end offset of block group X

So fix this by waiting for all cow and nocow writes after setting a block
group to readonly mode.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      f0e9b7d6
  9. 26 5月, 2016 2 次提交
  11. 16 5月, 2016 1 次提交
  13. 06 5月, 2016 3 次提交
  15. 29 4月, 2016 2 次提交
  17. 05 4月, 2016 1 次提交
    • K
      mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros · 09cbfeaf
      由 Kirill A. Shutemov 提交于 
      PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      09cbfeaf
  19. 12 3月, 2016 1 次提交
  21. 23 2月, 2016 1 次提交
    • L
      Btrfs: fix lockdep deadlock warning due to dev_replace · 73beece9
      由 Liu Bo 提交于 
      Xfstests btrfs/011 complains about a deadlock warning,

[ 1226.649039] =========================================================
[ 1226.649039] [ INFO: possible irq lock inversion dependency detected ]
[ 1226.649039] 4.1.0+ #270 Not tainted
[ 1226.649039] ---------------------------------------------------------
[ 1226.652955] kswapd0/46 just changed the state of lock:
[ 1226.652955]  (&delayed_node->mutex){+.+.-.}, at: [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0
[ 1226.652955] but this lock took another, RECLAIM_FS-unsafe lock in the past:
[ 1226.652955]  (&fs_info->dev_replace.lock){+.+.+.}

and interrupts could create inverse lock ordering between them.

[ 1226.652955]
other info that might help us debug this:
[ 1226.652955] Chain exists of:
  &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock

[ 1226.652955]  Possible interrupt unsafe locking scenario:

[ 1226.652955]        CPU0                    CPU1
[ 1226.652955]        ----                    ----
[ 1226.652955]   lock(&fs_info->dev_replace.lock);
[ 1226.652955]                                local_irq_disable();
[ 1226.652955]                                lock(&delayed_node->mutex);
[ 1226.652955]                                lock(&found->groups_sem);
[ 1226.652955]   <Interrupt>
[ 1226.652955]     lock(&delayed_node->mutex);
[ 1226.652955]
 *** DEADLOCK ***

Commit 084b6e7c ("btrfs: Fix a lockdep warning when running xfstest.") tried
to fix a similar one that has the exactly same warning, but with that, we still
run to this.

The above lock chain comes from
btrfs_commit_transaction
  ->btrfs_run_delayed_items
    ...
    ->__btrfs_update_delayed_inode
      ...
      ->__btrfs_cow_block
         ...
         ->find_free_extent
            ->cache_block_group
              ->load_free_space_cache
                ->btrfs_readpages
                  ->submit_one_bio
                    ...
                    ->__btrfs_map_block
                      ->btrfs_dev_replace_lock

However, with high memory pressure, tasks which hold dev_replace.lock can
be interrupted by kswapd and then kswapd is intended to release memory occupied
by superblock, inodes and dentries, where we may call evict_inode, and it comes
to

[ 1226.652955]  [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0
[ 1226.652955]  [<ffffffff81459e74>] btrfs_remove_delayed_node+0x24/0x30
[ 1226.652955]  [<ffffffff8140c5fe>] btrfs_evict_inode+0x34e/0x700

delayed_node->mutex may be acquired in __btrfs_release_delayed_node(), and it leads
to a ABBA deadlock.

To fix this, we can use "blocking rwlock" used in the case of extent_buffer, but
things are simpler here since we only needs read's spinlock to blocking lock.

With this, btrfs/011 no more produces warnings in dmesg.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      73beece9
  23. 11 2月, 2016 1 次提交
    • D
      btrfs: scrub: use GFP_KERNEL on the submission path · 58c4e173
      由 David Sterba 提交于 
      Scrub is not on the critical writeback path we don't need to use
GFP_NOFS for all allocations. The failures are handled and stats passed
back to userspace.

Let's use GFP_KERNEL on the paths where everything is ok, ie. setup the
global structures and the IO submission paths.

Functions that do the repair and fixups still use GFP_NOFS as we might
want to skip any other filesystem activity if we encounter an error.
This could turn out to be unnecessary, but requires more review compared
to the easy cases in this patch.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      58c4e173
  25. 23 1月, 2016 1 次提交
    • A
      wrappers for ->i_mutex access · 5955102c
      由 Al Viro 提交于 
      parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      5955102c
  27. 20 1月, 2016 1 次提交
  29. 16 1月, 2016 1 次提交
  31. 07 1月, 2016 3 次提交
  33. 03 12月, 2015 1 次提交
  35. 25 11月, 2015 3 次提交
    • F
      Btrfs: fix scrub preventing unused block groups from being deleted · 758f2dfc
      由 Filipe Manana 提交于 
      Currently scrub can race with the cleaner kthread when the later attempts
to delete an unused block group, and the result is preventing the cleaner
kthread from ever deleting later the block group - unless the block group
becomes used and unused again. The following diagram illustrates that
race:

              CPU 1                                 CPU 2

 cleaner kthread
   btrfs_delete_unused_bgs()

     gets block group X from
     fs_info->unused_bgs and
     removes it from that list

                                             scrub_enumerate_chunks()

                                               searches device tree using
                                               its commit root

                                               finds device extent for
                                               block group X

                                               gets block group X from the tree
                                               fs_info->block_group_cache_tree
                                               (via btrfs_lookup_block_group())

                                               sets bg X to RO

     sees the block group is
     already RO and therefore
     doesn't delete it nor adds
     it back to unused list

So fix this by making scrub add the block group again to the list of
unused block groups if the block group is still unused when it finished
scrubbing it and it hasn't been removed already.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>
      758f2dfc
    • F
      Btrfs: fix race between scrub and block group deletion · 020d5b73
      由 Filipe Manana 提交于 
      Scrub can race with the cleaner kthread deleting block groups that are
unused (and with relocation too) leading to a failure with error -EINVAL
that gets returned to user space.

The following diagram illustrates how it happens:

              CPU 1                                 CPU 2

 cleaner kthread
   btrfs_delete_unused_bgs()

     gets block group X from
     fs_info->unused_bgs

     sets block group to RO

       btrfs_remove_chunk(bg X)

         deletes device extents

                                         scrub_enumerate_chunks()

                                           searches device tree using
                                           its commit root

                                           finds device extent for
                                           block group X

                                           gets block group X from the tree
                                           fs_info->block_group_cache_tree
                                           (via btrfs_lookup_block_group())

                                           sets bg X to RO (again)

          btrfs_remove_block_group(bg X)

            deletes block group from
            fs_info->block_group_cache_tree

            removes extent map from
            fs_info->mapping_tree

                                               scrub_chunk(offset X)

                                                 searches fs_info->mapping_tree
                                                 for extent map starting at
                                                 offset X

                                                    --> doesn't find any such
                                                        extent map
                                                    --> returns -EINVAL and scrub
                                                        errors out to userspace
                                                        with -EINVAL

Fix this by dealing with an extent map lookup failure as an indicator of
block group deletion.
Issue reproduced with fstest btrfs/071.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>
      020d5b73
    • Z
      btrfs: Continue replace when set_block_ro failed · 76a8efa1
      由 Zhaolei 提交于 
      xfstests/011 failed in node with small_size filesystem.
Can be reproduced by following script:
  DEV_LIST="/dev/vdd /dev/vde"
  DEV_REPLACE="/dev/vdf"

  do_test()
  {
      local mkfs_opt="$1"
      local size="$2"

      dmesg -c >/dev/null
      umount $SCRATCH_MNT &>/dev/null

      echo  mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}"
      mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1
      mount "${DEV_LIST[0]}" $SCRATCH_MNT

      echo -n "Writing big files"
      dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1
      for ((i = 1; i <= size; i++)); do
          echo -n .
          /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1
      done
      echo

      echo Start replace
      btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || {
          dmesg
          return 1
      }
      return 0
  }

  # Set size to value near fs size
  # for example, 1897 can trigger this bug in 2.6G device.
  #
  ./do_test "-d raid1 -m raid1" 1897

System will report replace fail with following warning in dmesg:
 [  134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started
 [  135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28
 [  135.543505] ------------[ cut here ]------------
 [  135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440()
 [  135.545276] Modules linked in:
 [  135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256
 [  135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
 [  135.547798]  ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000
 [  135.548774]  ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4
 [  135.549774]  ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70
 [  135.550758] Call Trace:
 [  135.551086]  [<ffffffff817fe7b5>] dump_stack+0x44/0x55
 [  135.551737]  [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0
 [  135.552487]  [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20
 [  135.553211]  [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440
 [  135.554051]  [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0
 [  135.554722]  [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0
 [  135.555506]  [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0
 [  135.556304]  [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580
 [  135.557009]  [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0
 [  135.557855]  [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70
 [  135.558669]  [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90
 [  135.559374]  [<ffffffff81202124>] SyS_ioctl+0x74/0x80
 [  135.559987]  [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f
 [  135.560842] ---[ end trace 2a5c1fc3205abbdd ]---

Reason:
 When big data writen to fs, the whole free space will be allocated
 for data chunk.
 And operation as scrub need to set_block_ro(), and when there is
 only one metadata chunk in system(or other metadata chunks
 are all full), the function will try to allocate a new chunk,
 and failed because no space in device.

Fix:
 When set_block_ro failed for metadata chunk, it is not a problem
 because scrub_lock paused commit_trancaction in same time, and
 metadata are always cowed, so the on-the-fly writepages will not
 write data into same place with scrub/replace.
 Let replace continue in this case is no problem.

Tested by above script, and xfstests/011, plus 100 times xfstests/070.

Changelog v1->v2:
1: Add detail comments in source and commit-message.
2: Add dmesg detail into commit-message.
3: Limit return value of -ENOSPC to be passed.
All suggested by: Filipe Manana <fdmanana@gmail.com>
Suggested-by: NFilipe Manana <fdmanana@gmail.com>
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>
      76a8efa1
  37. 11 11月, 2015 6 次提交
  39. 08 10月, 2015 3 次提交
  41. 01 9月, 2015 1 次提交