xc5000 is just a tuner, not a decoder, so both DMB-TH and ISDB-T should
work properly there: it is just a matter of teaching the driver what
saw filter should be used and how to calculate the center frequency.
Requested-by: NChoi Wing Chan <chanchoiwing@gmail.com>
Cc: Steven Toth <stoth@linuxtv.org>
Cc: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

tvp5150 driver probe function doesn't check if the chip is present.
Thus the driver can be loaded without having a device.
This is dangerous and can cause kernel crash like this:

Kernel BUG at c03c0964 [verbose debug info unavailable]
Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
Modules linked in:
CPU: 0    Tainted: G        W     (3.4.0-cm-t3730+ #2)
PC is at media_entity_create_link+0xe4/0xf4
LR is at isp_register_entities+0x228/0x2f4
pc : [<c03c0964>]    lr : [<c03f3b30>]    psr: 60000013
sp : cf02de50  ip : 00000000  fp : c079405c
r10: 00000000  r9 : 00000000  r8 : cf33c800
r7 : c0794834  r6 : 00000000  r5 : 00000000  r4 : cf365b48
r3 : 00000000  r2 : cf365b48  r1 : 00000000  r0 : cf33c800
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 80004019  DAC: 00000015
Process swapper (pid: 1, stack limit = 0xcf02c2f0)
Stack: (0xcf02de50 to 0xcf02e000)
de40:                                     cf360000 cf366f28 cf366218 c0794834
de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0
de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff
dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58
dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c
dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58
df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10
df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38
df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb
df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790
df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007
dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006
dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000
dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000
[<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4)
[<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8)
[<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c)
[<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8)
[<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60)
[<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98)
[<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80)
[<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8)
[<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180)
[<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184)
[<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8)
[<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec)
[<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8)
Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2)

---[ end trace 3ed3c618b26ff3e8 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

This patch fixes the tvp5150_read() function to return an error in case
the I2C transaction fails.
tvp5150_probe() and other relevant driver callbacks changed to check the
status of the I2C read operations.
In case of a read error throw an error message with v4l2_err()
instead of v4l2_dbg().

[mchehab@redhat.com: Fix a small typo breaking compilation]
Signed-off-by: NDmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add horizontal and vertical flip to the mem2mem_testdev driver.
Flip modes can be enabled either separately or simultaneously.
Signed-off-by: NTomasz Moń <desowin@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Value 0x00 was written instead of 0x10 which was aim.

Bit4 is overcurrent disable timer - ODT. According to datasheet ODT
functions are always enabled but setting it 1 is still recommended.

Thanks to Aubin Constans to pointing that bug.
Reported-by: NAubin Constans <aconstans@wyplay.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Dan asked "Btw, why are the sizes specified in hex instead of
decimal here?". After looking code, I agree also decimal
presentation is clearer. So lets change those.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Message length check was wrong which could cause garbage sent to LNB,
but only in case garbage got from the userspace application.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans-Frieder Vogt <hfvogt@gmx.net>
Signed-off-by: NThomas Mair <thomas.mair86@googlemail.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NThomas Mair <thomas.mair86@googlemail.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NThomas Mair <thomas.mair86@googlemail.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This only adds support for the Terratec Cinergy T Stick Black device.

Changes from previous patches:
- fixed compiler warnings
- added fc0013 tuner handling to this patch
Signed-off-by: NThomas Mair <thomas.mair86@googlemail.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of using a table for reg bitmask, use a macro. This should save
some data segment space.

Cc: Thomas Mair <thomas.mair86@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Changelog for ver. 0.5:
- fixed code style and naming errors

Changelog for ver. 0.4:
- removed statistics as their calculation was wrong
- fixed bug in Makefile
- indentation and code style improvements
Signed-off-by: NThomas Mair <thomas.mair86@googlemail.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

commit 9ef449c6 ("[media] rc: Postpone ISR
registration") fixed an early ISR registration on several drivers.  It did
however also introduced a bug by moving the invocation of pnp_port_start()
to the end of the probe function.

This patch fixes this issue by moving the invocation of pnp_port_start() to
an earlier stage in the probe function.

Cc: stable@vger.kernel.org
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: NLuis Henriques <luis.henriques@canonical.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement API support to return AFC frequency shift, as this device
supports it. The only other driver that implements it is tda9887,
and the frequency there is reported in Hz. So, use Hz also for this
tuner.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There are several bugs at the signal strength algorithm:

	- It is using logical OR, instead of bit OR;
	- It doesn't wait up to 18 ms as it should;
	- the strength range is not ok.

Rework on it, in order to make it work.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If g_tuner is called and the tuner is able to return the signal strength
via has_signal(), call the tunner callback to retrieve such data for all
tuner types, not only for radio ones.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Change the firmware logic to use request_firmware_nowait(), and
to preserve the loaded firmwares in memory, to reduce the risk
of troubles with buggy userspace apps.

With this change, while the firmware is being loaded, the driver
will return -EAGAIN to any calls. If, for some reason, firmware
failed to be loaded from userspace, it will return -ENODEV.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If firmware is not loaded for some reason, or if it is not ready
yet, it makes no sense to honour to any DVB callbacks.

So, return -EAGAIN, as the error condition may be temporary.
If the device doesn't initialize, either because it requires a
firmware or because there's an error during init_drxk, returns
-ENODEV, to indicate such error, on all DVB callbacks.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Don't allow other devices at the same I2C bus to use it during
firmware load, in order to prevent using the device while it is
not on a sane state.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As it will be using the unlocked version of i2c_transfer during
firmware loads, make sure that the priv state routine will be
used on all I2C calls, in preparation for the next patch that
will implement an exclusive lock mode to be used during firmware
load, at drxk_init.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The firmware blob may not be available when the driver probes.

Instead of blocking the whole kernel use request_firmware_nowait() and
continue without firmware.

This shouldn't be that bad on drx-k devices, as they all seem to have an
internal firmware. So, only the firmware update will take a little longer
to happen.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some drivers (in particular for TV cards) need exclusive access to
their I2C buses for specific operations. Export an unlocked flavor
of i2c_transfer to give them full control.

The unlocked flavor has the following limitations:
* Obviously, caller must hold the i2c adapter lock.
* No debug messages are logged. We don't want to log messages while
  holding a rt_mutex.
* No check is done on the existence of adap->algo->master_xfer. It
  is thus the caller's responsibility to ensure that the function is
  OK to call.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* v4l_for_linus: (44 commits)
  [media] smia: Fix compile failures
  [media]  Fix VIDIOC_DQEVENT docbook entry
  [media] s5p-fimc: Fix control creation function
  [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file
  [media] s5p-mfc: Fix setting controls
  [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT
  [media] v4l/s5p-mfc: corrected encoder v4l control definitions
  [media] v4l: mem2mem_testdev: Fix race conditions in driver
  [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism
  [media] cxd2820r: Fix an incorrect modulation type bitmask
  [media] em28xx: Show a warning if the board does not support remote controls
  [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD
  [media] USB: Staging: media: lirc: initialize spinlocks before usage
  [media] Revert "[media] media: mx2_camera: Fix mbus format handling"
  [media] bw-qcam: driver and pixfmt documentation fixes
  [media] cx88: fix firmware load on big-endian systems
  [media] cx18: support big-endian systems
  [media] ivtv: fix support for big-endian systems
  [media] tuner-core: return the frequency range of the correct tuner
  [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls()
  ...

Conflicts:
	Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
	drivers/media/video/em28xx/em28xx-cards.c

Cc: Ravi Kumar V <kumarrav@codeaurora.org>
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make it possible for gpio-ir-recv users to choose a map name.

Cc: Ravi Kumar V <kumarrav@codeaurora.org>
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add missing information so that udev can create an entry for gpio-ir-recv under
/dev/input/by-path/ .

Cc: Ravi Kumar V <kumarrav@codeaurora.org>
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Convert radio-sf16fmi to use generic LM7000 driver.
Tested with SF16-FMI, SF16-FMP and SF16-FMD.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Convert radio-aimslab to use generic LM7000 driver.
Tested with Reveal RA300.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add very simple driver for Sanyo LM7000 AM/FM tuner chip. Only FM is supported
as there is no known HW with AM implemented.

This will be used by radio-aimslab and radio-sf16fmi.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This reverts commit 4ecbb694.

As requested by Hans Verkuil:
> You accidentally merged the wrong first version of the lm7000 patch series.
>
> These are the correct second version patches:
>
> http://patchwork.linuxtv.org/patch/11689/
> http://patchwork.linuxtv.org/patch/11690/
> http://patchwork.linuxtv.org/patch/11691/
>
> The second version is much simpler and doesn't require the creation of a whole
> new driver.
Requested-by: NHans Verkuil <hverkuil@xs4all.nl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This reverts commit bece083a.

As requested by Hans Verkuil:
> You accidentally merged the wrong first version of the lm7000 patch series.
>
> These are the correct second version patches:
>
> http://patchwork.linuxtv.org/patch/11689/
> http://patchwork.linuxtv.org/patch/11690/
> http://patchwork.linuxtv.org/patch/11691/
>
> The second version is much simpler and doesn't require the creation of a whole
> new driver.
Requested-by: NHans Verkuil <hverkuil@xs4all.nl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This reverts commit 1e70a6cf.

As requested by Hans Verkuil:
> You accidentally merged the wrong first version of the lm7000 patch series.
>
> These are the correct second version patches:
>
> http://patchwork.linuxtv.org/patch/11689/
> http://patchwork.linuxtv.org/patch/11690/
> http://patchwork.linuxtv.org/patch/11691/
>
> The second version is much simpler and doesn't require the creation of a whole
> new driver.
Requested-by: NHans Verkuil <hverkuil@xs4all.nl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is basically s/getmode/getrxsubchans/ and s/setmode/setaudmode/
with some whitespace adjustment in affected lines to please the eye.
The rename is done to point out their relation to the rxsubchans and
audmode fields of struct v4l2_tuner.

I also corrected a commented out call to v4l_dbg in one of the lines.
Signed-off-by: NDaniel Glöckner <daniel-gl@gmx.net>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The switch/case was setting clock_setting that is not being used. Both switch/case and the variable definition were removed.

Currently clock is being calculated by the formula:
(state->fclk/1000000 - 8)

Tested by compilation only.
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Tested by compilation only.
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Tested by compilation only.
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In function saa7164_api_i2c_read variable regval was set but not used.

Tested by compilation only.
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>