fs_enet_fec_mii_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fec_enet_mdio_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ethoc_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dnet_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

macb_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tg3_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

greth_mdio_reset() does nothing useful and this function is optional for
the MDIO bus code, so let's just remove it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the UniMAC block is configured to forward the CRC as part of the
Ethernet frame (priv->crc_fwd_en, set by default), enabling the hardware
RX checksum block unveiled that the dma_rxchk_bit was never set in the
per-packet status bits (dma_flag in bcmgenet_desc_rx). This would make
the chksum_ok variable to be never set to 1, and the networking stack
would have to compute the packet checksums, which takes a substantial
amount of time.

In order for the RXCHK block to properly compute the packet checksum in
hardware, we also need to set the RBUF_SKIP_FCS bit accordingly.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exists.

This change was suggested by Thomas Gleixner

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
declarer name module_exit;
identifier ex;
@@

module_exit(ex);

@@
identifier r.ex;
@@

ex(...) {
  <...
- del_timer
+ del_timer_sync
    (...)
  ...>
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exists.

This change was suggested by Thomas Gleixner.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
declarer name module_exit;
identifier ex;
@@

module_exit(ex);

@@
identifier r.ex;
@@

ex(...) {
  <...
- del_timer
+ del_timer_sync
    (...)
  ...>
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exists.

This change was suggested by Thomas Gleixner.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
declarer name module_exit;
identifier ex;
@@

module_exit(ex);

@@
identifier r.ex;
@@

ex(...) {
  <...
- del_timer
+ del_timer_sync
    (...)
  ...>
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exists.

This change was suggested by Thomas Gleixner.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
declarer name module_exit;
identifier ex;
@@

module_exit(ex);

@@
identifier r.ex;
@@

ex(...) {
  <...
- del_timer
+ del_timer_sync
    (...)
  ...>
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to allocate 15 bytes in excess for a SYNACK packet,
as it contains no data, only headers.

SYNACK are always generated in softirq context, and contain a single
segment, we can use TCP_INC_STATS_BH()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an IPv6 host route with metrics exists, an attempt to add a
new route for the same target with different metrics fails but
rewrites the metrics anyway:

12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000
12sp0:~ # ip -6 route show
fe80::/64 dev eth0  proto kernel  metric 256
fec0::1 dev eth0  metric 1024  rto_min lock 1s
12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1500
RTNETLINK answers: File exists
12sp0:~ # ip -6 route show
fe80::/64 dev eth0  proto kernel  metric 256
fec0::1 dev eth0  metric 1024  rto_min lock 1.5s

This is caused by all IPv6 host routes using the metrics in
their inetpeer (or the shared default). This also holds for the
new route created in ip6_route_add() which shares the metrics
with the already existing route and thus ip6_route_add()
rewrites the metrics even if the new route ends up not being
used at all.

Another problem is that old metrics in inetpeer can reappear
unexpectedly for a new route, e.g.

12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000
12sp0:~ # ip route del fec0::1
12sp0:~ # ip route add fec0::1 dev eth0
12sp0:~ # ip route change fec0::1 dev eth0 hoplimit 10
12sp0:~ # ip -6 route show
fe80::/64 dev eth0  proto kernel  metric 256
fec0::1 dev eth0  metric 1024  hoplimit 10 rto_min lock 1s

Resolve the first problem by moving the setting of metrics down
into fib6_add_rt2node() to the point we are sure we are
inserting the new route into the tree. Second problem is
addressed by introducing new flag DST_METRICS_FORCE_OVERWRITE
which is set for a new host route in ip6_route_add() and makes
ipv6_cow_metrics() always overwrite the metrics in inetpeer
(even if they are not "new"); it is reset after that.

v5: use a flag in _metrics member rather than one in flags

v4: fix a typo making a condition always true (thanks to Hannes
Frederic Sowa)

v3: rewritten based on David Miller's idea to move setting the
metrics (and allocation in non-host case) down to the point we
already know the route is to be inserted. Also rebased to
net-next as it is quite late in the cycle.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChristian Riesch <christian.riesch@omicron.at>
Cc: Dong Zhu <bluezhudong@gmail.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 203191c3.

A better version of this fix is forthcoming.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 370d4a26 "bnx2x: Create workqueue for IOV related tasks" breaks bnx2x
compilation when CONFIG_BNX2X_SRIOV is not set - "multiple definition of
`bnx2x_schedule_iov_task'".
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ying Xue says:

====================
tipc: clean up bearer and node layer

This is another commit series which aims at facilitating future
changes to the locking policy around nodes, links and bearers.

Currently, the tipc routing hierarchy comprises the structures 'node',
'link' and 'bearer'. The whole hierarchy is protected by a big
read/write lock (tipc_net_lock), to ensure that nothing is added or
removed while any of these structures is being accessed. Obviously
the locking policy makes node, link and bearer components closely
bound together so that their relationship becomes extremely complex.
In the worst case, such locking policy not only has a negative
influence on performance, but also it's prone to lead to deadlock
occasionally.

In order to decouple the complex relationship between bearer and node
as well as link, the locking policy is adjusted as follows:

- Bearer level
  RTNL lock is used on update side, and RCU is used on read side.
  Meanwhile, all bearer instances including broadcast bearer are
  saved into bearer_list array.

- Node and link level
  All node instances are saved into two tipc_node_list and node_htable
  lists. The two lists are protected by node_list_lock on write side,
  and they are guarded with RCU lock on read side. All members in node
  structure including link instances are protected by node spin lock.

- The relationship between bearer and node
  When link accesses bearer, it first needs to find the bearer with
  its bearer identity from the bearer_list array. When bearer accesses
  node, it can iterate the node_htable hash list with the node address
  to find the corresponding node.

In the new locking policy, every component has its private locking
solution and the relationship between bearer and node is very simple,
that is, they can find each other with node address or bearer identity
from node_htable hash list or bearer_list array.

But, prior to these changes, we need to do some necessary cleanup and
code consolidation. This is what we do with this commit series. In a
later series we will replace net_lock with RTNL as well as RCU lock
to deploy the new locking policy.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without properly implicit or explicit read memory barrier, it's
unsafe to read an atomic variable with atomic_read() from another
thread which is different with the thread of changing the atomic
variable with atomic_inc() or atomic_dec(). So a stale tipc_num_links
may be got with atomic_read() in tipc_node_get_links(). If the
tipc_num_links variable type is converted from atomic to unsigned
integer and node list lock is used to protect it, the issue would
be avoided.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As tipc_node_list is protected by rcu read lock on read side, it's
unnecessary to hold node_list_lock to protect tipc_node_list in
tipc_node_get_links(). Instead, node_list_lock should just protects
tipc_num_nodes in the function.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert tipc_node_list list and node_htable hash list to RCU lists.
On read side, the two lists are protected with RCU read lock, and
on update side, node_list_lock is applied to them.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a node is created, tipc_net_lock read lock is first held and
then node_create_lock is grabbed in order to prevent the same node
from being created and inserted into both node list and hlist twice.
But when we query node from the two node lists, we only hold
tipc_net_lock read lock without grabbing node_create_lock. Obviously
this locking policy is unable to guarantee that the two node lists
are always synchronized especially when the operation of changing
and accessing them occurs in different contexts like currently doing.

Therefore, rename node_create_lock to node_list_lock to protect the
two node lists, that is, whenever node is inserted into them or node
is queried from them, the node_list_lock should be always held. As a
result, tipc_net_lock read lock becomes redundant and then can be
removed from the node query functions.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now unicast bearer is dynamically allocated and placed into its
identity specified slot of bearer_list array. When we search
bearer_list array with a bearer identity, the corresponding bearer
instance can be found. But broadcast bearer is statically allocated
and it is not located in the bearer_list array yet. So we decide to
enlarge bearer_list array into MAX_BEARERS + 1 slots, and its last
slot stores the broadcast bearer so that the broadcast bearer can
be found from bearer_list array with MAX_BEARERS as index. The
change will help us reduce the complex relationship between bearer
and link in the future.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the allocation of tipc_bearer structure instance is converted
from statical way to dynamical way, we identify whether a certain
tipc_bearer structure pointer is valid by checking whether the pointer
is NULL or not. So the active flag in tipc_bearer structure becomes
redundant.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As part of the effort to introduce RCU protection for the bearer
list, we first need to change it to a list of pointers.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 'tipc_node_list' is guarded by tipc_net_lock and 'links' array
defined in 'tipc_node' structure is protected by node lock as well.
Without acquiring the two locks in named_cluster_distribute() a fatal
oops may happen in case that a destroyed link might be got and then
accessed. Therefore, above mentioned two locks must be held in
named_cluster_distribute() to prevent the issue from happening
accidentally.

As 'links' array in node struct must be protected by node lock,
we have to move the code of selecting an active link from
tipc_link_xmit() to named_cluster_distribute() and then call
__tipc_link_xmit() with the selected link to deliver name messages.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to the lacking of any credential, it's allowed to accept commands
requested from remote nodes to query the local node status, which is
prone to involve potential security risks. Instead, if we login to
a remote node with ssh command, this approach is not only more safe
than the remote management feature, but also it can give us more
permissions like changing the remote node configuration. So it's
reasonable for us to obsolete the remote management feature now.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tipc_node_create routine doesn't need to check whether a node
object specified with a node address exists or not because its
caller(ie, tipc_disc_recv_msg routine) has checked this before
calling it.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Byungho An says:

====================
This is 14th posting for SAMSUNG SXGBE driver.

Changes since v1:
- changed name of driver to SXGbE as per Ben's comment
- squashed Joe's neatening for many stuff in original patches

Changes since v2:
- updated and split binding document as per Mark's comment
- clean up codes as per Joe's comment
- removed unused fields and clean up codes as per Francois's comment
- removed module parameters as per Dave's comment
- moved driver directory to samsung/sxgbe/

Changes since v3:
- fixed Missing a blank line after declarations as per Dave's comment
- clean up codes as per Joe's comment
- removed reference of net_device.{irq, base_addr} as per Francois's comment

Changes since v4:
- updated binding document and DT related function as per Mark's comment

Changes since v5:
- updated binding document and DT related function as per Florian's comment
- fixed typo and shortened code as per Joe's comment

Changes since v6:
- updated TSO related functions as per Rayagond's comment
- updated binding document as per Mark's comment
- removed WoL patch from this patch set

Changes since v7:
- updated TSO related functions as per Rayagond's comment

Changes since v8:
- removed select and depends statement from vendor sub-section as per
  Dave's comment

Changes since v9:
- removed adv-add-map, force-sf-dma-modei and force-thresh-dma-mode from
  binding documnet as per Mark's comment

Changes since v10:
- clean up codes as per Francois's comment

Changes since v11:
- clean up mdio_read/write codes as per Francois's comment
- changed irq acquisition error path as per Francois's comment
- updated mdio and platform related codes as per Tomasz'comment
- clean up dma related codes as per Vince's comment

Changes since v12:
- fixed typo

Changes since v13:
- clean up error path codes for irqs as per Francois's comment
- removed unsupported functions for ehttoolirq as per Ben's comment
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
Signed-off-by: NMonam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
Signed-off-by: NMonam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
Signed-off-by: NMonam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
Signed-off-by: NMonam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NByungho An <bh74.an@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds ethtool related functions.
Signed-off-by: NVipul Pandya <vipul.pandya@samsung.com>
Neatening-by: NJoe Perches <joe@perches.com>
Signed-off-by: NByungho An <bh74.an@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds TX and RX checksum offload support.
Signed-off-by: NVipul Pandya <vipul.pandya@samsung.com>
Neatening-by: NJoe Perches <joe@perches.com>
Signed-off-by: NByungho An <bh74.an@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable TSO during initialization for each DMA channels
Signed-off-by: NVipul Pandya <vipul.pandya@samsung.com>
Neatening-by: NJoe Perches <joe@perches.com>
Signed-off-by: NByungho An <bh74.an@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added support for the EEE(Energy Efficient Ethernet) in 10G ethernet driver.
Signed-off-by: NGirish K S <ks.giri@samsung.com>
Neatening-by: NJoe Perches <joe@perches.com>
Signed-off-by: NByungho An <bh74.an@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for Samsung 10Gb ethernet driver(sxgbe).

- sxgbe core initialization
- Tx and Rx support
- MDIO support
- ISRs for Tx and Rx
- ifconfig support to driver
Signed-off-by: NSiva Reddy Kallam <siva.kallam@samsung.com>
Signed-off-by: NVipul Pandya <vipul.pandya@samsung.com>
Signed-off-by: NGirish K S <ks.giri@samsung.com>
Neatening-by: NJoe Perches <joe@perches.com>
Signed-off-by: NByungho An <bh74.an@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds binding document for SXGBE ethernet driver via device-tree.
Signed-off-by: NSiva Reddy Kallam <siva.kallam@samsung.com>
Signed-off-by: NByungho An <bh74.an@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>