- 17 8月, 2010 1 次提交
-
- 16 8月, 2010 1 次提交
-
-
由 David S. Miller 提交于
This reverts commit 1235f504. It causes regressions worse than the problem it was trying to fix. Eric will try to solve the problem another way. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2010 2 次提交
-
-
由 Min Zhang 提交于
sysctl output ipv6 gc_elasticity and min_adv_mss as values divided by HZ. However, they are not in unit of jiffies, since ip6_rt_min_advmss refers to packet size and ip6_rt_fc_elasticity is used as scaler as in expire>>ip6_rt_gc_elasticity, so replace the jiffies conversion handler will regular handler for them. This has impact on scripts that are currently working assuming the divide by HZ, will yield different results with this patch in place. Signed-off-by: NMin Zhang <mzhang@mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As xfrm_compile_policy runs within a read_lock, we cannot use GFP_KERNEL for memory allocations. Reported-by: NLuca Tettamanti <kronos.it@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2010 4 次提交
-
-
由 Maxim Levitsky 提交于
Atheros PCIe wireless cards handled by ath5k do require L0s disabled. For distributions shipping with CONFIG_PCIEASPM (this will be enabled by default in the future in 2.6.36) this will also mean both L1 and L0s will be disabled when a pre 1.1 PCIe device is detected. We do know L1 works correctly even for all ath5k pre 1.1 PCIe devices though but cannot currently undue the effect of a blacklist, for details you can read pcie_aspm_sanity_check() and see how it adjusts the device link capability. It may be possible in the future to implement some PCI API to allow drivers to override blacklists for pre 1.1 PCIe but for now it is best to accept that both L0s and L1 will be disabled completely for distributions shipping with CONFIG_PCIEASPM rather than having this issue present. Motivation for adding this new API will be to help with power consumption for some of these devices. Example of issues you'd see: - On the Acer Aspire One (AOA150, Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)) doesn't work well with ASPM enabled, the card will eventually stall on heavy traffic with often 'unsupported jumbo' warnings appearing. Disabling ASPM L0s in ath5k fixes these problems. - On the same card you would see a storm of RXORN interrupts even though medium is idle. Credit for root causing and fixing the bug goes to Jussi Kivilinna. Cc: David Quan <David.Quan@atheros.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: stable@kernel.org Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rajkumar Manoharan 提交于
This patch handles the firmware loading properly for device ID 7015. Signed-off-by: NRajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yuri Kululin 提交于
Use appropriate command (CMD_TRIGGER_SCAN_TO) instead of scan command (CMD_SCAN) to configure trigger scan timeout. This was broken in commit 3a98c30f. This fix address the bug reported here: https://bugzilla.kernel.org/show_bug.cgi?id=16554 Cc: stable@kernel.org Signed-off-by: NYuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: NYuri Kululin <ext-yuri.kululin@nokia.com> Acked-by: NKalle Valo <kvalo@adurom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vivek Natarajan 提交于
Some APs advertise that they may be HT40 capable in the capabilites but the current operating channel configuration may be only HT20. This causes disconnection as ath9k_htc sets WLAN_RC_40_FLAG despite the AP operating in HT20 mode. Hence set this flag only if the current channel configuration is HT40 enabled. Cc: stable@kernel.org Signed-off-by: NVivek Natarajan <vnatarajan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 8月, 2010 2 次提交
-
-
由 Ursula Braun 提交于
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to CTCM_READ/CTCM_WRITE to avoid warnings. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiko Carstens 提交于
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to READ_CHANNEL/WRITE_CHANNEL which should suffice. Fixes this: In file included from drivers/s390/net/claw.c:93: drivers/s390/net/claw.h:78:1: warning: "WRITE" redefined In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/debug.h:12, from drivers/s390/net/claw.c:68: include/linux/fs.h:156:1: warning: this is the location of the previous definition Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2010 4 次提交
-
-
由 Randy Dunlap 提交于
Several gigabit network drivers (SB1250_MAC, TIGON3, FSL, GIANFAR, UCC_GETH, MV643XX_ETH, XILINX_LL_TEMAC, S6GMAC, STMMAC_ETH, PASEMI_MAC, and OCTEON_ETHERNET) select PHYLIB. These drivers are not under NET_ETHERNET (10/100 mbit), so this warning is generated (long, irrelevant parts are omitted): warning: (NET_DSA && NET && EXPERIMENTAL && NET_ETHERNET && !S390 || ... || SB1250_MAC && NETDEVICES && NETDEV_1000 && SIBYTE_SB1xxx_SOC || TIGON3 && NETDEVICES && NETDEV_1000 && PCI || FSL_PQ_MDIO && NETDEVICES && NETDEV_1000 && FSL_SOC || GIANFAR && NETDEVICES && NETDEV_1000 && FSL_SOC || UCC_GETH && NETDEVICES && NETDEV_1000 && QUICC_ENGINE || MV643XX_ETH && NETDEVICES && NETDEV_1000 && (MV64X60 || PPC32 || PLAT_ORION) || XILINX_LL_TEMAC && NETDEVICES && NETDEV_1000 && (PPC || MICROBLAZE) || S6GMAC && NETDEVICES && NETDEV_1000 && XTENSA_VARIANT_S6000 || STMMAC_ETH && NETDEV_1000 && NETDEVICES && CPU_SUBTYPE_ST40 || PASEMI_MAC && NETDEVICES && NETDEV_10000 && PPC_PASEMI && PCI || OCTEON_ETHERNET && STAGING && !STAGING_EXCLUDE_BUILD && CPU_CAVIUM_OCTEON) selects PHYLIB which has unmet direct dependencies (!S390 && NET_ETHERNET) PHYLIB is used by non-10/100 mbit ethernet drivers, so change the dependencies to be NETDEVICES instead of NET_ETHERNET. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Hartkopp 提交于
This patch adds a limit for nframes as the number of frames in TX_SETUP and RX_SETUP are derived from a single byte multiplex value by default. Use-cases that would require to send/filter more than 256 CAN frames should be implemented in userspace for complexity reasons anyway. Additionally the assignments of unsigned values from userspace to signed values in kernelspace and vice versa are fixed by using unsigned values in kernelspace consistently. Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Reported-by: NBen Hawkes <hawkes@google.com> Acked-by: NUrs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajkumar Manoharan 提交于
This should fix the oops which occurs during the packet injection on monitor interface. EIP is at ath9k_htc_tx_start+0x69/0x220 [ath9k_htc] [<f84dc8ea>] ? invoke_tx_handlers+0xa5a/0xee0 [mac80211] [<f82c84f4>] ? ath9k_htc_tx+0x44/0xe0 [ath9k_htc] [<f84db7b8>] ? __ieee80211_tx+0xf8/0x190 [mac80211] [<f84dce0d>] ? ieee80211_tx+0x9d/0x1a0 [mac80211] [<f84dcfac>] ? ieee80211_xmit+0x9c/0x1c0 [mac80211] [<f84dd1b5>] ? ieee80211_monitor_start_xmit+0x85/0xb0 [mac80211] [<c04c30cd>] ? dev_hard_start_xmit+0x1ad/0x210 [<c04b97c2>] ? __alloc_skb+0x52/0x130 [<c04d7cd5>] ? sch_direct_xmit+0x105/0x170 [<c04c5e9f>] ? dev_queue_xmit+0x37f/0x4b0 [<c0567e1e>] ? packet_snd+0x21e/0x250 [<c05684a2>] ? packet_sendmsg+0x32/0x40 [<c04b4c63>] ? sock_aio_write+0x113/0x130 [<c0207934>] ? do_sync_write+0xc4/0x100 [<c0167740>] ? autoremove_wake_function+0x0/0x50 [<c02f4414>] ? security_file_permission+0x14/0x20 [<c0207ad4>] ? rw_verify_area+0x64/0xe0 [<c01e6458>] ? handle_mm_fault+0x338/0x390 [<c0207cd5>] ? vfs_write+0x185/0x1a0 [<c058db20>] ? do_page_fault+0x160/0x3a0 [<c0208512>] ? sys_write+0x42/0x70 [<c01033ec>] ? syscall_call+0x7/0xb Signed-off-by: NRajkumar Manoharan <rmanoharan@atheros.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
It is necessary to call pm_qos_add_request prior to calling pm_qos_update_request. It was revealed that ipw2100 has been doing this wrong since "pm_qos: Get rid of the allocation in pm_qos_add_request()" (commit 82f68251) added a WARN that results in the following backtrace: WARNING: at kernel/pm_qos_params.c:264 pm_qos_update_request+0x5e/0x70() pm_qos_update_request() called for unknown object Call Trace: [<c1024088>] ? warn_slowpath_common+0x78/0xb0 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<c1024153>] ? warn_slowpath_fmt+0x33/0x40 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<f89fe15f>] ? ipw2100_up+0x3f/0xf10 [ipw2100] [<c11961c9>] ? vsnprintf+0xc9/0x530 [<f89ff36c>] ? ipw2100_net_init+0x2c/0x1c0 [ipw2100] [<c12f542d>] ? register_netdevice+0x7d/0x3c0 [<f89f9b00>] ? ipw2100_irq_tasklet+0x910/0x9a0 [ipw2100] [<c12f579f>] ? register_netdev+0x2f/0x40 [<f89fd471>] ? ipw2100_pci_init_one+0xd21/0x1060 [ipw2100] [<c11a5ebb>] ? local_pci_probe+0xb/0x10 [<c11a6d49>] ? pci_device_probe+0x69/0x90 [<c1224704>] ? driver_probe_device+0x74/0x180 [<c10dd15a>] ? sysfs_create_dir+0x6a/0xb0 [<c1224889>] ? __driver_attach+0x79/0x80 [<c1224810>] ? __driver_attach+0x0/0x80 [<c1223fa2>] ? bus_for_each_dev+0x52/0x80 [<c1224586>] ? driver_attach+0x16/0x20 [<c1224810>] ? __driver_attach+0x0/0x80 [<c122395f>] ? bus_add_driver+0x17f/0x250 [<c11a5ec0>] ? pci_device_shutdown+0x0/0x20 [<c11a6c80>] ? pci_device_remove+0x0/0x40 [<c1224b13>] ? driver_register+0x63/0x120 [<c11a6f96>] ? __pci_register_driver+0x36/0xa0 [<f84f9048>] ? ipw2100_init+0x48/0x67 [ipw2100] [<c1001122>] ? do_one_initcall+0x32/0x170 [<c1087078>] ? __vunmap+0xb8/0xf0 [<f84f9000>] ? ipw2100_init+0x0/0x67 [ipw2100] [<c10510c1>] ? sys_init_module+0x161/0x1000 [<c108f847>] ? sys_close+0x67/0xe0 [<c13647c1>] ? syscall_call+0x7/0xb This patch moves pm_qos_add_request prior to pci_register_driver in ipw2100 in order to avoid this problem. Reported-by: NChristoph Fritz <chf.fritz@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 8月, 2010 7 次提交
-
-
由 Jarek Poplawski 提交于
Require qdisc class ops .walk and .leaf for classful qdisc in register_qdisc(). The checks could be done later insted, but these ops are really needed and used by most of classful qdiscs. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
sch_sfq as a classful qdisc needs the .leaf handler. Otherwise, there is an oops possible in tc_modify_qdisc()/check_loop(). Fixes commit 7d2681a6Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
The setting of SPI_DATA_POS depending on CONFIG_CAIF_SPI_SYNC where inverted. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Headroom size for control channel must be at least 48 bytes in some scenarios. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
"netpoll: Use 'bool' for netpoll_rx() return type." missed the case when CONFIG_NETPOLL is disabled. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2010 19 次提交
-
-
由 Mat Martineau 提交于
The previous value of 672 for L2CAP_DEFAULT_MAX_PDU_SIZE is based on the default L2CAP MTU. That default MTU is calculated from the size of two DH5 packets, minus ACL and L2CAP b-frame header overhead. ERTM is used with newer basebands that typically support larger 3-DH5 packets, and i-frames and s-frames have more header overhead. With clean RF conditions, basebands will typically attempt to use 1021-byte 3-DH5 packets for maximum throughput. Adjusting for 2 bytes of ACL headers plus 10 bytes of worst-case L2CAP headers yields 1009 bytes of payload. This PDU size imposes less overhead for header bytes and gives the baseband the option to choose 3-DH5 packets, but is small enough for ERTM traffic to interleave well with other L2CAP or SCO data. 672-byte payloads do not allow the most efficient over-the-air packet choice, and cannot achieve maximum throughput over BR/EDR. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Mat Martineau 提交于
remote_tx_win is intended to be set on receipt of an L2CAP configuration request. The value is used to determine the size of the transmit window on the remote side of an ERTM connection, so L2CAP can stop sending frames when that remote window is full. An incorrect remote_tx_win value will cause the stack to not fully utilize the tx window (performance impact), or to overfill the remote tx window (causing dropped frames or a disconnect). This patch removes an extra setting of remote_tx_win when a configuration response is received. The transmit window has a different meaning in a response - it is an informational value less than or equal to the local tx_win. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Mat Martineau 提交于
The L2CAP specification requires that the ERTM retransmit timeout be at least 2 seconds for BR/EDR connections. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Mat Martineau 提交于
Incoming configuration values must be converted to native CPU order before use. This fixes a bug where a little-endian MPS value is compared to a native CPU value. On big-endian processors, this can cause ERTM and streaming mode segmentation to produce PDUs that are larger than the remote stack is expecting, or that would produce fragmented skbs that the current FCS code cannot handle. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Ben Greear 提交于
This is based on work originally done by Patric McHardy. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kulikov Vasiliy 提交于
Driver should call pci_disable_device() if it returns from pci_probe() with error. Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kulikov Vasiliy 提交于
Driver should call pci_disable_device() if it returns from pci_probe() with error. Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kulikov Vasiliy 提交于
Driver should call pci_disable_device() if it returns from pci_probe() with error. Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This patch makes rx_submit() return an error code, and makes some call sites that care check the return value. This is important because it lets us properly handle cases where the device isn't ready to handle URB submissions (e.g., when it is autosuspended under some drivers); previously, we would attempt and fail to submit URBs and reschedule ourselves to try and fail again. This patch is against Linus's 2.6 repo commit 45d7f32c. Signed-Off-By: NElizabeth Jones <ellyjones@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles Verify in register_qdisc() some basic qdisc class handlers are present. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles Add dummy .unbind_tcf and .put qdisc class ops for easier verification. (All other schedulers have it like this.) Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
qlcnic_pci_info structs are 128 bytes so an array of 8 uses 1024 bytes. That's a lot if you run with 4K stacks. I allocated them with kcalloc() instead. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
In the original code we allocated memory conditionally and freed it in the error handling unconditionally. It turns out that this function is only called during initialization and "adapter->npars" and "adapter->eswitch" are always NULL at the start of the function. I removed those checks. Also since I was cleaning things, I changed the error handling for qlcnic_get_pci_info() and pulled everything in an indent level. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix phy.c kernel-doc notation: Warning(drivers/net/phy/phy.c:313): No description found for parameter 'ifr' Warning(drivers/net/phy/phy.c:313): Excess function parameter 'mii_data' description in 'phy_mii_ioctl' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Add missing kernel-doc notation to struct sock: Warning(include/net/sock.h:324): No description found for parameter 'sk_peer_pid' Warning(include/net/sock.h:324): No description found for parameter 'sk_peer_cred' Warning(include/net/sock.h:324): No description found for parameter 'sk_classid' Warning(include/net/sock.h:324): Excess struct/union/enum/typedef member 'sk_peercred' description in 'sock' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix etherdevice.h parameter name typo in kernel-doc: Warning(include/linux/etherdevice.h:138): No description found for parameter 'hwaddr' Warning(include/linux/etherdevice.h:138): Excess function parameter 'addr' description in 'dev_hw_addr_random' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
drivers/net/wan/farsync.c: In function 'fst_intr_rx': drivers/net/wan/farsync.c:1312: warning: cast to pointer from integer of different size drivers/net/wan/farsync.c: In function 'do_bottom_half_tx': drivers/net/wan/farsync.c:1407: warning: cast to pointer from integer of different size The "skb" and "mem" arguments being passed here are DMA addresses being programmed into the hardware registers, so pass them as the type that they actually are. And use the correct printf formatting in debug logging statements for these things to match the type change. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Currently the driver will try to protect all frames, which leads to a lot of odd things like sending an RTS with a zeroed RA before multicast frames, which is clearly bogus. In order to fix all of this, we need to take a step back and see what we need to achieve: * we need RTS/CTS protection if requested by the AP for the BSS, mac80211 tells us this * in that case, CTS-to-self should only be enabled when mac80211 tells us * additionally, as a hardware workaround, on some devices we have to protect aggregated frames with RTS To achieve the first two items, set up the RXON accordingly and set the protection required flag in the transmit command when mac80211 requests protection for the frame. To achieve the last item, set the rate-control RTS-requested flag for all stations that we have aggregation sessions with, and set the protection required flag when sending aggregated frames (on those devices where this is required). Since otherwise bugs can occur, do not allow the user to override the RTS-for-aggregation setting from sysfs any more. Finally, also clean up the way all these flags get set in the driver and move everything into the device-specific functions. Cc: stable@kernel.org [2.6.35] Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Accesses to "wdev->current_bss" must be locked with the wdev lock, which action frame transmission is missing. Cc: stable@kernel.org [2.6.33+] Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-