- 14 8月, 2009 2 次提交
-
-
由 David Kilroy 提交于
This helps in the refactorring required to convert the driver to cfg80211. Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
This is a boolean value set based on firmware capabilities, so move the variable to the capabilities section and reduce the structure size. Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 7月, 2009 7 次提交
-
-
由 David Kilroy 提交于
This removes the custom scan cache used by orinoco. We also have to avoid calling cfg80211_scan_done from the hard interrupt, so we offload the entirety of scan processing to a workqueue. This may behave strangely if you start scanning just prior to suspending... Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Each device does almost exactly the same things on suspend and resume when upping and downing the interface. So move this logic into a common routine. Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
With the move to cfg80211 it's nice to keep the hardware operations distinct from the interface, even though we can only support a single interface. This also means the driver resembles other cfg80211 drivers. Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Initialise and register a wiphy. Store the orinoco_private structure in the new wiphy, and use the net_device private area to store the wireless_dev. This results in a change to the way we navigate from a net_device to the driver private orinoco_private, which we encapsulate in the inline function ndev_priv. Most of the remaining calls to netdev_priv are thus replaced by ndev_priv. We can immediately rely on cfg80211 to handle SIOCGIWNAME, so orinoco_ioctl_getname is removed. Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Initialise the orinoco driver before registerring with netdev, which will help when we get to cfg80211... Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Move away from using net_device as the main structure in orinoco function calls. Use orinoco_private instead. This makes more sense when we move to cfg80211, and we get wiphys as well. Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 17 3月, 2009 1 次提交
-
-
由 Andrey Borzenkov 提交于
Currently part of support for FW caching is unconditionally compiled in even if it is never used. Consistently remove caching support if not requested by user. Signed-off-by: NAndrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 10 2月, 2009 1 次提交
-
-
由 Andrey Borzenkov 提交于
Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by: NAndrey Borzenkov <arvidjaar@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 1月, 2009 1 次提交
-
-
由 David Kilroy 提交于
Probably something leftover from experimentation with tasklets. Now the structure declaration orinoco_rx_data can be relocated to orinoco.c Signed-off-by: NDavid Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 11月, 2008 2 次提交
-
-
由 David Kilroy 提交于
Make firmware caching on startup optional, and make it default. When the option is not selected and PM_SLEEP is configured, then cache firmware in the suspend pm_notifier. This configuration saves about 64k RAM in normal use, but can lead to a situation where the driver is configured to use a different firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 11月, 2008 1 次提交
-
-
由 David Kilroy 提交于
Keeping all the orinoco drivers in a common directory will make maintenance easier. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 11月, 2008 1 次提交
-
-
由 Andrey Borzenkov 提交于
If card is using downloadable firmware (like Agere 9.x), firmware has to be reloaded during resume. It is not possible to use request_firmware for that, because tasks are still frozen, so request_firmware will just timeout and fail. So cache firmware image in memory for later reuse in ->resume method. Signed-off-by: NAndrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 8月, 2008 8 次提交
-
-
由 David Kilroy 提交于
Use the MIC algorithm from the crypto subsystem. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Read the packet data off the hardware and straight into an skb in the interrupt. We have to do this in case we don't process the tasklet in time. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Includes basic plumbing to get the data into firmware, and retrieve it. SIOCxIWGENIE simply record (and return) the IE, and do not act on it. SIOCxIWENCODEEXT, SIOCxIWAUTH and SIOCSIWMLME should be as functional as the driver will support. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
For WPA support we need to encode NONE, WEP and TKIP in the encoding parameter. In anticipation of this we need to change the usage away from the current boolean usage. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
This provides more information than the standard Agere scan, including the WPA IE. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Just sprinkle the necessary structs around... Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
The tx control word has moved into the 802.11 header area on these firmwares. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Kilroy 提交于
Firmware download is enabled for Agere in orinoco_cs. Symbol firmware download has been moved out of spectrum_cs into orinoco_cs. Firmware download is not enabled for Intersil. Symbol based firmware is restricted to only download on spectrum_cs based cards. The firmware names are hardcoded for each firmware type. Signed-off-by: NDavid Kilroy <kilroyd@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 1月, 2008 1 次提交
-
-
由 Dan Williams 提交于
Bring scan result handling more in line with drivers like ipw. Scan results are aggregated and a BSS dropped after 15 seconds if no beacon is received. This allows the driver to interact better with userspace where more than one process may request scans or results at any time. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 30 8月, 2006 1 次提交
-
-
由 Pavel Roskin 提交于
SPARC architecture has been fixed, so it's no longer needed. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 4月, 2006 3 次提交
-
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Use skb_pull() to strip the addresses from the original packet. Don't strip protocol bytes. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 11月, 2005 1 次提交
-
-
由 Olaf Hering 提交于
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 9月, 2005 3 次提交
-
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Bump version to 0.15rc3. Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Annotate endianess of variables and structure members. Don't reuse variables for both host-endian and little-endian data. Minor comment changes in affected structures. Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Remove inneeded system includes. Most system includes are not needed. In particular, the hardware backends don't need anything network related. Some includes have been moved from local headers to the C files where they are actually used. Includes that have to be in the local headers are no longer from the C sources. Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 14 9月, 2005 1 次提交
-
-
由 Pavel Roskin 提交于
Author: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NPavel Roskin <proski@gnu.org> Use new Wireless Extension API for wireless stats. Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 27 6月, 2005 4 次提交
-
-
由 Jeff Garzik 提交于
-
由 Christoph Hellwig 提交于
Patch from Pavel Roskin
-
由 Christoph Hellwig 提交于
Patch from Pavel Roskin
-
由 Christoph Hellwig 提交于
Patch from Pavel Roskin
-
- 16 5月, 2005 1 次提交
-
-
由 Christoph Hellwig 提交于
Patch from Pavel Roskin Index: linux-2.6/drivers/net/wireless/orinoco.c ===================================================================
-